V5PD190BWMobile Payment Terminal

D190 Mobile payment terminal PAX TECHNOLOGY LIMITED Installation Manual 1. Contents Checklist Please check the components after unpacking. If any one of them is missing, or if there is a page missing from the product manual, etc., please contact the dealer. Name Qty. D190 Mobile payment terminal 1 AC Power Adapter 1 USB Cable 1 Battery 1 Product Manual 1 2. Installation SAM Card： 1) Remove the battery cover. 2) Remove the battery. 3) Insert the SAM card to the corresponding card slot (PS: The default hardware configuration only support SAM1 slot ). Battery: Alignment battery tip side to battery tip in terminal and insert. 3. Instructions 1) Power ON/OFF Power on: Plug in power adapter or insert the battery, Press button for 3 seconds until the PAX LOGO display on LCD. Power off: Press button for 3 seconds until the “Power off ” display on the LCD ,then press “ENTER”, then the POS terminal is being turned off. 2) IC Card Put IC card chip side upward, push-in IC card slot and to bottom. 3) Contactless Card The card read area is above the LCD, Put the card above the LCD. 4) Battery Charge display Connecting USB port with external adapter can charge the battery. And there are charging display. 5) Battery Charge style Please use the original adapter, if you need to charge. Working Environment Temperature: 0°C～50°C(32°F～122°F) Humidity: 10%～93%( non-condense) Storage Environment Temperature:-20°C～70°C(-4°F～158°F) PAX TECHNOLOGY LIMITED Humidity.:5%～95% (non-condense) 4. Installation and Usage Tips 1) Avoid putting the terminal in direct sunlight, high temperature, moist, or dusty environment. 2) Forbid non-professional to repair the terminal. 3) Before insert the card, please check internal and around of IC card slot. if you found some suspicious objects , must report to related administrator. 5. Lithium Ion Battery Usage Tips WARNING: 1）Don't use the battery in sunlight or smoke, dust environment. 2）Prohibited to strike, squeeze and tread on battery or throw it into the liquid and fire. 3）If battery is impressive, deformed, damaged or exothermic seriously, please stop using immediately and replace it! 4）If the continuous working time is only half of new one, the battery life may be end. Please replace it! 5）Must use the specified battery model and charger, otherwise there will be explosion 6）Charging time can not exceed 24 hours. If the battery is out of power, please recharge in time. Avoid damaging the battery in over-charge and over-discharge. 7）If be non-use for long time, please recharge the battery per 6 months to avoid shortening its life. 8）Suggest to replace it when the battery have been used for 2 years. 9）Be sure to follow the instructions to dispose the wasted batteries. 6. Icon shows Do not throw away, need professional recycling. Class II Equipment For indoor use only Energy Efficiency Marking AC voltage DC voltage The full text of the EU declaration of conformity is available at the following internet address： https://www.pax.com.cn/ProductCE/index.aspx FCC compliance statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC SAR statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body ISED compliance statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si l…

Text truncated - open the document above for the full version.

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name PAX Technology Limited Address Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour, Hong Kong, China Grantee Code V5P FCC ID V5PD190BW Authorized Contact Name Jenna Tan Contact Email [email protected] Contact Phone 86-755-86156663 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: October 10, 2020 Print Name: Jenna Tan Title: Certification supervisor *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

PAX Technology Limited Date: October 10, 2020 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: V5PD190BW To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with PAX Technology Limited. This authorization is valid until further written notice from the applicant. Print Name: Jenna Tan Title: Certification supervisor Signature: On behalf of Company: PAX Technology Limited Telephone: 86-755-86156663 E-mail: [email protected]

PAX Technology Limited TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: V5PD190BW LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Tune Up Procedure Software Security Description The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Print Name: Jenna Tan Title: Certification supervisor Signature: On behalf of Company: PAX Technology Limited Telephone: 86-755-86156663 E-mail: [email protected]

PAX Technology Limited We, PAX Technology Limited declare that this EUT (FCC ID: V5PD190BW) doesn’t have ad Hoc Mode function on “non-US/Canada frequencies“. In addition, the frequency selection feature is disabled by firmware for devices marketed to the US/ Canada. For DTS part of this device, only channels 1-11 will be used in North America. Country code selection is disabled. Should you have any questions or comments regarding this matter, Please have my best attention. Sincerely yours, Print Name: Jenna Tan T itle: Certification supervisor Signature: On behalf of Company: PAX Technology Limited Telephone: 86-755-86156663 E-mail: [email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 6 External Photos for SZEM2008007375CR FCC ID: V5PD190BW SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 6 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 6

IC Label Location

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 8 Internal Photos for SZEM2008007375CR FCC ID:V5PD190BW SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 8 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 7 of 8 BT WIFI antenna NFC antenna SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 8 of 8

Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200700084901 Appendix C Calibration certificate 1. Dipole D2450V2 - SN 817(2019/06/10) D5GHzV2 - SN1095(2019/06/14) 2. DAE DAE4-SN 1245(2020/05/27) 3. Probe EX3DV4-SN 3798(2020/05/29) 200700084620080011222008001121 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200700084901 Dipole D2450V2 SN 817 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2019/6/10 -28.5 / 52.3 / 2020/6/9 -29.3 2.81% 54.3 2.0Ω Body Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2019/6/10 -26.6 / 48.7 / 2020/6/9 -27.5 3.38% 49.6 0.9Ω Dipole D5GHzV2 SN 1095 for 5250MHz Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2019/6/14 -31.6 / 49.3 / 2020/6/13 -32.4 2.53% 50.5 1.2Ω Body Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2019/6/14 -34.5 / 48.5 / 2020/6/13 -35.2 2.03% 49.9 1.4Ω Dipole D5GHzV2 SN 1095 for 5600MHz Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2019/6/14 -22.5 / 57.9 / 2020/6/13 -23.2 3.11% 58.6 0.7Ω Body Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2019/6/14 -20.7 / 59.2 / 2020/6/13 -21.3 2.90% 60.4 1.2Ω Dipole D5GHzV2 SN 1095 for 5750MHz Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2019/6/14 -32.4 / 51.8 / 2020/6/13 -33.5 3.40% 52.7 0.9Ω Body Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2019/6/14 -35.8 / 51.6 / 2020/6/13 -36.3 1.40% 52.9 1.3Ω 200700084620080011222008001121

Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200800112101 Appendix D Photographs 1. SAR measurement System 2. Photographs of Tissue Simulate Liquid 3. Photographs of EUT test position 4. EUT Constructional Details Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200800112101 1. SAR measurement System Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200800112101 2. Photographs of Tissue Simulate Liquid Photo 1: Tissue Simulant Liquid for Head 2450 Photo 2: Tissue Simulant Liquid for Head 5GHz Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200800112101 3. Photographs of EUT test position Photo 3: Front side 0mm Photo 4: Back side 0mm Photo 5: Left side 0mm Photo 6: Right side 0mm Photo 7: Top side 0mm Photo 8: Bottom side 0mm Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200800112101 Photo 9: Front side 10mm Photo 10: Back side 10mm Photo 11: Left side 10mm Photo 12: Right side 10mm Photo 13: Top side 10mm Photo 14: Bottom side 10mm Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200800112101 4. EUT Constructional Details Photo 15: Front View Photo 16: Back View Photo 17: Left View Photo 18: Right View Photo 19: Top View Photo 20: Bottom View

Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200800112101 Page: 1 of 61 FCC SAR TEST REPORT Application No.: KSEM2008001121CR Applicant: PAX TECHNOLOGY LIMITED Address of Applicant: Room 2416, 24/F, Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong Manufacturer: PAX Computer Technology(Shenzhen) Co., Ltd. Address of Manufacturer: 4/F, No.3 Building, Software Park, Second Central Science Tech Road, High Tech industrial Park, Shenzhen, Guangdong, P.R.C. Factory: Guangzhou PAX Computer Technology Co., Ltd Address of Factory: No.2 Bldg, No.113 Jinyang Road, Hualong Town, Panyu, Guangzhou, Guangdong, China Product Name: Mobile Payment Terminal Model No.(EUT): D190 Trade mark: PAX FCC ID: V5PD190BW Standard(s) : FCC 47CFR §2.1093 Date of Receipt: 2020-08-27 Date of Test: 2020-08-31 to 2020-09-03 Date of Issue: 2020-09-04 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Eric Lin Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200800112101 Page: 2 of 61 REVISION HISTORY Revision Record Version Description Date Remark 00 Original 2020-09-04 Original Authorized for issue by: Richard.Kong/ Project Engineer Eric.Lin/Reviewer Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200800112101 Page: 3 of 61 TEST SUMMARY Frequency Band Maximum Reported SAR(W/kg) Body 10mm Extremity 0mm WI-FI (2.4GHz) 0.125 0.306 WI-FI (5GHz) 0.413 0.453 SAR Limited(W/kg) 1.6 4.0 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200800112101 Page: 4 of 61 CONTENTS 1 GENERAL INFORMATION .............................................................................................................................. 6 1.1 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 1.1.1 DUT Antenna Locations ....................................................................................................................... 7 1.2 TEST SPECIFICATION ................................................................................................................................... 8 1.3 RF EXPOSURE LIMITS .................................................................................................................................. 9 1.4 TEST LOCATION ........................................................................................................................................ 10 1.5 TEST FACILITY .......................................................................................................................................... 10 2 LABORATORY ENVIRONMENT ................................................................................................................... 11 3 SAR MEASUREMENTS SYSTEM CONFIGURATION .................................................................................. 12 3.1 THE SAR MEASUREMENT SYSTEM ............................................................................................................ 12 3.2 ISOTROPIC E-FIELD PROBE EX3DV4 ......................................................................................................... 13 3.3 DATA ACQUISITION ELECTRONICS (DAE) ................................................................................................... 14 3.4 SAM TWIN PHANTOM ................................................................................................................................ 14 3.5 ELI PHANTOM ........................................................................................................................................... 15 3.6 DEVICE HOLDER FOR TRANSMITTERS ......................................................................................................... 16 3.7 MEASUREMENT PROCEDURE ...................................................................................................................... 17 3.7.1 Scanning procedure ........................................................................................................................... 17 3.7.2 Data Storage ...................................................................................................................................... 19 3.7.3 Data Evaluation by SEMCAD ............................................................................................................. 19 4 SAR MEASUREMENT VARIABILITY AND UNCERTAINTY ........................................................................ 21 4.1 SAR MEASUREMENT VARIABILITY ............................................................................................................... 21 4.2 SAR MEASUREMENT UNCERTAINTY ............................................................................................................ 22 5 DESCRIPTION OF TEST POSITION ............................................................................................................. 23 5.1 THE BODY TEST POSITION ......................................................................................................................... 23 5.1.1 Extremity exposure conditions ........................................................................................................... 24 6 SAR SYSTEM VERIFICATION PROCEDURE ............................................................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800737503 Page: 1 of 70 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZEM2008007375CR Applicant: PAX Technology Limited Address of Applicant: Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour, Hong Kong, China Manufacturer: PAX Computer Technology(Shenzhen) Co., Ltd. Address of Manufacturer: 4/F, No.3 Building, Software Park, Second Central Science-Tech Road, High-Tech industrial Park, Shenzhen, Guangdong, P.R.C Factory: Guangzhou PAX Computer Technology Co., Ltd Address of Factory: No.2 Bldg, No.113 Jinyang Road, Hualong Town, Panyu, Guangzhou, Guangdong, China Equipment Under Test (EUT): EUT Name: Mobile Payment Terminal Model No.: D190 Trade mark: PAX FCC ID: V5PD190BW Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2020-08-03 Date of Test: 2020-08-04 to 2020-09-03 Date of Issue: 2020-09-04 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800737503 Page: 2 of 70 Revision Record Version Chapter Date Modifier Remark 01 2020-09-04 Original Authorized for issue by: Calvin Weng/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800737503 Page: 3 of 70 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Emission Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800737503 Page: 4 of 70 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................. 3 3 CONTENTS ......................................................................................................................................... 4 4 GENERAL INFORMATION .................................................................................................................. 6 4.1 DETAILS OF E.U.T. ......................................................................................................................... 6 4.2 CABLE ........................................................................................................................................... 6 4.3 DESCRIPTION OF SUPPORT UNITS .................................................................................................... 6 4.4 MEASUREMENT UNCERTAINTY ......................................................................................................... 6 4.5 TEST LOCATION ............................................................................................................................. 7 4.6 TEST FACILITY ............................................................................................................................... 7 4.7 DEVIATION FROM STANDARDS ......................................................................................................... 7 4.8 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 7 5 EQUIPMENT LIST ............................................................................................................................... 8 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................12 6.1 ANTENNA REQUIREMENT ................................................................................................................12 6.1.1 Test Requirement: ..................................................................................................................12 7 RADIO SPECTRUM MATTER TEST RESULTS .................................................................................13 7.1 CONDUCTED PEAK OUTPUT POWER ................................................................................................13 7.1.1 E.U.T. Operation .....................................................................................................................13 7.1.2 Test Mode Description ............................................................................................................13 7.1.3 Test Setup Diagram ................................................................................................................14 7.1.4 Measurement Procedure and Data ..................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800737505 Page: 1 of 100 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZEM2008007375CR Applicant: PAX Technology Limited Address of Applicant: Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour, Hong Kong, China Manufacturer: PAX Computer Technology(Shenzhen) Co., Ltd. Address of Manufacturer: 4/F, No.3 Building, Software Park, Second Central Science-Tech Road, High-Tech industrial Park, Shenzhen, Guangdong, P.R.C Factory: Guangzhou PAX Computer Technology Co., Ltd Address of Factory: No.2 Bldg, No.113 Jinyang Road, Hualong Town, Panyu, Guangzhou, Guangdong, China Equipment Under Test (EUT): EUT Name: Mobile Payment Terminal Model No.: D190 Trade mark: PAX FCC ID: V5PD190BW Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2020-08-03 Date of Test: 2020-08-04 to 2020-09-03 Date of Issue: 2020-09-04 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800737505 Page: 2 of 100 Revision Record Version Chapter Date Modifier Remark 01 2020-09-04 Original Authorized for issue by: Calvin Weng/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800737505 Page: 3 of 100 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requ…

Text truncated - open the document above for the full version.