V5PE700PROIntegrated Smart Terminal

1. Contents Checklist Please check the components after unpacking. If any are missing, please contact the dealer. Part Qty E700 Pro 1 AC Power Adapter 1 AC Power Cable 1 Thermal Paper Roll 1 Quick Setup Guide 1 2. Product Description Front View Printer Button，Finger Print，Printer Paper Exit，Power & Printer Indicator，Power Button， Light Sensor，Cashier Facing Scanner，LCD Display Q20 view Hybrid Card Reader，Customer-facing Scanner，Contactless Area Ports View Cash Drawer Port，Power Port，Battery Cover，HDMI Port，Audio Jack，RS232 Port，USB-A/B Host Port，USB-OTG，LAN，Battery Cover Side View Volume+，Volume- 3. Terminal Ports The following ports are accessible on the back of the E700 Pro: • Power – Connect AC power supply to E700 Pro • Cash Drawer – Insert the cable from cash drawer to connect with cash register • Audio Jack – Allows hearing impaired to connect assistive listening device • USB Host – Connect USB device • RS232 – Used to connect to serial device such an external POS device or check reader • USB – SLAVE – Used for local terminal download • LAN – Used for bi-directional Ethernet connections USB A-HOST output: 5V500mA USB B-HOST output: 5V500mA USB C-HOST output: 5V500mA USB D-HOST output: 5V500mA Open the back cover to access following ports: • SD Card Slot – Open card cover, remove battery and insert card into SD card slot • SIM Card Slot – Open card cover, remove battery and insert SIM card into SIM slot to connect to cellular carrier’s network. 4. Power ON/OFF • Power on: Press and hold the Power button for three seconds until the main screen displays normally. (See page 1 for the location of the Power button. • Power off: Press and hold the Power button for three seconds until the shut down menu displays. Select Power off. The terminal turns off after a few seconds. (See page 1 for the location of the Power button.) 5. Hybrid Card Reader The Q20 on the consumer-facing side of the E700 Pro includes a reader that can be used as a Magnetic Stripe, EMV, and NFC/Contactless card reader. • Magnetic Stripe Reader Insert the card into the reader slot located on the top of the Q20. The terminal reads the information from the card when the magnetic stripe is inserted into the card slot. • EMV Card Reader Insert the card with the front facing you and the chip down into the card slot. Leave the card inserted until the terminal prompts to remove the card. • NFC/Contactless Card Reader Tap the card to the Q20 screen when prompted. The terminal uses an antenna device that detects and retrieves information from the card. 6. Specifications ⚫ Operation System: Android 10.0 ⚫ CPU: Octa-core Cortex™-A55，1.6GHZ ⚫ Memory: 3GB DDR+32GB eMMC ⚫ Main Display: 12.5 inch, 1920x1080 resolution, capacitive touch screen ⚫ Printer: 3" high-speed thermal printer with auto-cutter, printing speed 150mm/s, paper width 80mm, diameter 80mm ⚫ Audio: Built-in speaker, support headphone output ⚫ Camera with scan window: (coverage of 30mm-120mm) for 1D/2D scan • Front fixed focus camera with 0.3 mega pixels(facing to cashier) • Rear fixed focus camera with 2 mega pixels(facing to customer) ⚫ L-Sensor (Ambient Light Sensor): Automatically adjust the backlight brightness of the main display ⚫ Wireless Communication: Supports LAN, WIFI, Bluetooth, 3G/4G ⚫ Peripheral Ports: ✓ Power port x 1 ✓ USB A ports x 4 ✓ USB C port x1 ✓ LAN x 1 ✓ Cash drawer x 1 ✓ Serial port x 1 ✓ Audio jack x 1 ⚫ Card Slot: ✓ SIM card slot x 1 ✓ Micro SD card slot x 1 ⚫ Magnetic Card Reader: Supports track 1/2/3. ⚫ IC Card Reader: Conforms to the standard of ISO7816, EMV2000 L1&L2, PBOC3.0 ⚫ Contactless Card Reader: Compatible with ISO14443 Type A&B 7. Load Printer Paper 1. When the printer is out of paper, the yellow “Paper Out” indicator lights. Press the button on the left of printer to open the cover. 2. Load the paper roll into the paper compartment and extend the end of the paper out of the printer. 3. Close printer cover. The Paper Out indicator light turns off. 8. Installation and Usage Tips • Avoid exposing the device to an excessively hot, humid, dusty, or strong electromagnetic environment. • Do not vibrate, shake, or drop the device. • Do not plug or unplug any part of the device while it is powered on. This may cause damage to an internal circuit. • Please contact PAX technical support for assistance with the device. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. Hereby, PAX Computer Technology (Shenzhen) Co., Ltd. declares that the radio equipment type E700 Pro is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address： http://www.pax.com.cn/ProductCE.aspx Icon shows ⚫ The mains plug is used as the disconnect device, The socket-outlet shall be installed near the equipment and shall be easily accessible. ⚫ This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. ⚫ Moving parts Keep body parts away from moving parts. Warning To avoid replacement of a battery with an incorrect type Don't disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a Battery. Don’t leaving a battery in an extremely high temperature surrounding environment. To avoid battery subjected to extremely low air pressure. The marking information is located at the bottom of apparatus. FCC Regulations: This device complies with Part 15 of the FCC Rules. Operation is su…

Text truncated - open the document above for the full version.

PAX Technology Limited Date: 6/30/2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: V5PE700PRO Grantee’s FRN: 0017536285 1. PAX Technology Limited (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. PAX Technology Limited (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Company Name: PAX Technology Limited Contact Name: Jenna tan Title of Person: Certification Leader Address: Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong

PAX Technology Limited Date: 6/30/2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation FCC ID: V5PE700PRO Grantee’s FRN: 0017536285 PAX Technology Limited (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. U.S. Agent Information: FRN: 0033507476 Contact Person: John Hallisey Company Name: Pax Technology,Inc. Company Address: 8775 Baypine Road,Jacksonville,FL 32256 Email: [email protected] Sincerely yours, Company Name: PAX Technology Limited Contact Name: Jenna tan Title of Person: Certification Leader Address: Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong

Pax Technology,Inc. Date: 5/26/2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) FCC US Agent Letter of Attestation Grantee Code: V5P Grantee’s FRN: 0017536285 To whom it may concern: FCC US Agent Agent Company Name: Pax Technology,Inc. FCC FRN: 0033507476 Agent Contact Name: John Hallisey Agent US Address: 8775 Baypine Road,Jacksonville,FL 32256 Agent Email Address: [email protected] This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of PAX Technology Limited (“the applicant”) for the above referenced Grantee Code:. We are aware of the requirements and responsibilities of the applicant’s agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. Sincerely, Authorized Agent Contact Person Name: John Hallisey Agent contact Job Title: Agent Company name: Pax Technology,Inc. DocuSign Envelope ID: 2B98498F-8B31-4695-91FD-CF76AF2BB95C General Counsel

PAX Technology Limited Date: 06/30/2023 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by: Company Name: PAX Technology Limited Contact Name: Jenna tan Title of Person: Certification Leader Address: Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong

PAX TECHNOLOGY LTD Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: V5PE700PRO To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Part list Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: PAX Technology Limited Contact Name: Jenna tan Title of Person: Certification Leader Address: Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong Date: 06/30/2023

PAX TECHNOLOGY LTD DATE : 06/30/2023 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Request for Short-Term Confidentiality Company name: PAX TECHNOLOGY LTD FCC ID: V5PE700PRO FCC Part 15 Certification Pursuant to Sections 0.457 and 0.459 of the commission rules, and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we hereby request short-term confidentiality for the following items prior to marketing the device.: (1) Test Setup Photos (2) External Photos (3) Internal Photos (4) User Manual The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Sincerely, Company Name: PAX Technology Limited Contact Name: Jenna tan Title of Person: Certification Leader Address: Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong

External Photographs Project No.:4790870870-1-RF Page 2 of 5 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. View of EUT-1 View of EUT-2 Page 3 of 5 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. View of EUT-3 View of EUT-4 Page 4 of 5 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. View of EUT-5 View of EUT-6 Page 5 of 5 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. View of EUT-7 Detail View of adapter

Label: Label location: The label is attached to the surface of the product with a permanent adhesive.

Internal Photographs Project No.:4790870870-1-RF Page 2 of 12 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-1 Internal View of EUT-2 Page 3 of 12 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-3 Internal View of EUT-4 LTE DIV ANTENNA WIFI/BT ANTENNA LTE MAIN ANT CONNECTOR WIFI/BT ANT CONNECTOR LTE DIV ANT CONNECTOR Page 4 of 12 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-5 Internal View of EUT-6 LTE MAIN ANTENNA Page 5 of 12 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-7 Internal View of EUT-8 Page 6 of 12 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-9 Internal View of EUT-10 Page 7 of 12 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-11 Internal View of EUT-12 Page 8 of 12 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-13 Internal View of EUT-14 Page 9 of 12 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-15 Internal View of EUT-16 Page 10 of 12 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-17 Internal View of EUT-18 Page 11 of 12 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-19 Internal View of EUT-20 Page 12 of 12 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-21 Internal View of EUT-22 NFC ANT

FCC ID: V5PE700PRO According to KDB 447498 D01 General RF Exposure Guidance v06, section 4.3.1 SAR Test Exclusion Threshold for < 100 MHz and < 200 mm as per Appendix C SAR exclusion for 100 MHz at 50 mm is 237 mW. For frequencies below 100 MHz, the following may be considered for SAR test exclusion (also illustrated in Appendix C):33 1) For test separation distances > 50 mm and < 200 mm, the power threshold at the corresponding test separation distance at 100 MHz in step b) is multiplied by [1 + log(100/f(MHz))] 237 * [1 + log(100/f(13.56))]=422 mW 2) For test separation distances ≤ 50 mm, the power threshold determined by the equation in c) 1) for 50 mm and 100 MHz is multiplied by ½ 422 *(1/2)= 221mW 1. SAR test exclusion threshold Frequency: 13.56 MHz, test separation distances ≤ 50 mm. Max. Tune-up Tolerance (mW) SAR Test Exclusion Thresholds (mW) 0.00002 221 Remark: -Based on field strength 58.19 dBuV/m at 3m transmit power(eirp) of the device was calculated as 0.00002 mW using free space formula. 3m result(dBuV/m) = 30m result(dBuV/m) +40 = 18.19+40= 58.19 dBuV/m 2. Conclusion: No SAR is required.

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. This report does not imply that the product(s) has met the criteria for certification. FCC 47 CFR PART 15 SUBPART C ISED RSS-210 ISSUE 10 CERTIFICATION TEST REPORT For Integrated Smart Terminal MODEL NUMBER: E700 Pro REPORT NUMBER: 4790870870-1-RF-7 ISSUE DATE: July 14, 2023 FCC ID:V5PE700PRO IC:11689A-E700PRO Prepared for PAX Technology Limited Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Building 10, Innovation Technology Park, No. 1, Li Bin Road, Song Shan Lake Hi- Tech Development Zone Dongguan, 523808, People’s Republic of China Tel: +86 769 22038881 Fax: +86 769 33244054 Website: www.ul.com REPORT NO.: 4790870870-1-RF-7 Page 2 of 36 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0059 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . Revision History Rev. Issue Date Revisions Revised By V0 7/14/2023 Initial Issue REPORT NO.: 4790870870-1-RF-7 Page 3 of 36 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0059 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . Summary of Test Results Clause Test Items FCC Rules Test Results 1 Transmitter 99% Emission Bandwidth / 20dB Bandwidth RSS-Gen 6.7/ Part 15.215 (c) PASS 2 Transmitter Frequency Stability (Temperature & Voltage Variation) CFR 47 FCC §15.225(e) ISED RSS-Gen Clause 6.11 ISED RSS-210 Annex B.6 PASS 3 Fundamental Field Strength CFR 47 FCC §5.225(a)(b)(c)(d) ISED RSS-Gen Clause 6.12 ISED RSS-210 Annex B.6 PASS 4 Radiated Emissions CFR 47 FCC§15.209(a) CFR 47 FCC§15.225(d) ISED RSS-Gen Clause 6.13 ISED RSS-210 Annex B.6 PASS 5 Band Edge Radiated Emissions CFR 47 FCC §15.209(a) CFR 47 FCC §15.225(c)(d) ISED RSS-Gen Clause 6.13 ISED RSS-210 Annex B.6 PASS 6 Conducted Emission Test for AC Power Port CFR 47 FCC §15.207 ISED RSS-Gen Clause 8.8 PASS 7 Antenna Requirement CFR 47 FCC §15.203 ISED RSS-Gen Clause 6.8 Pass Note 1: This test report is only published to and used by the applicant, and it is not for evidence purpose in China. Note 2: The measurement result for the sample received is <Pass> according to < CFR 47 FCC PART 15 SUBPART C, ISED RSS-210 Issue 9 and ISED RSS-GEN Issue 5 > when <Accuracy Method> decision rule is applied. REPORT NO.: 4790870870-1-RF-7 Page 4 of 36 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0059 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS .................................................................................... 5 2. TEST METHODOLOGY ........................................................................................................ 6 3. FACILITIES AND ACCREDITATION .................................................................................... 6 4. CALIBRATION AND UNCERTAINTY .................................................................................. 7 4.1. MEASURING INSTRUMENT CALIBRATION ................................................................ 7 4.2. MEASUREMENT UNCERTAINTY ................................................................................. 7 5. EQUIPMENT UNDER TEST ................................................................................................. 8 5.1. DESCRIPTION OF EUT ................................................................................................. 8 5.2. MAXIMUM FIELD STRENGTH ...................................................................................... 8 5.3. DESCRIPTION OF AVAILABLE ANTENNAS ................................................................ 8 5.4. TEST ENVIRONMENT ................................................................................................... 9 5.5. DESCRIPTION OF TEST SETUP ................................................................................ 10 5.6. MEASURING INSTRUMENT AND SOFTWARE USED .............................................. 12 6. ANTENNA PORT TEST RESULTS .................................................................................... 13 6.1. 99% & 20dB BANDWIDTH ........................................................................................... 13 6.2. TRANSMITTER FREQUENCY STABILITY ................................................................. 15 7. RADIATED EMISSION TEST RESULTS ............................................................................ 17 7.1. FIELD STRENGTH OF INTENTIONAL EMISSIONS ................................................... 24 7.2. SPURIOUS EMISSIONS BELOW 1GHz AND ABOVE 30MHz ................................... 25 7.3. SPURIOUS EMISSIONS BELOW 30MHz ................................................................... 27 8. AC POWER LINE CONDUCTED EMISSIONS ................................................................... 30 9. ANTENNA REQUIREMENTS ............................................................................................. 36 REPORT NO.: 4790870870-1-RF-7 Page 5 of 36 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0059 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . 1. ATTEST…

Text truncated - open the document above for the full version.

Frequency (MHz) Antenna Type Antenna Gain (dBi) 13.56 Coil antenna 0 Antenna size： please refer to operation description

Appendix II Setup Photographs Project No.:4790870870-1-RF Page 2 of 4 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. AC Power Line Conducted Emission Radiated Band edge and Spurious Emission (Above 1 GHz) Page 3 of 4 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. RADIATED RF MEASUREMENT SETUP (30MHz~1GHz) Page 4 of 4 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. RADIATED RF MEASUREMENT SETUP (Below 30MHz)