V5PIM25BWUNATTENDED PAYMENT TERMINAL

PAX Technology Limited Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: July 5, 2024 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) To whom it may concern, PAX Technology Limited certifies that the equipment FCC ID: V5PIM254GBW, FCC ID: V5PIM25BW and FCC ID: V5PIM25 for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. PAX Technology Limited certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, ________________________ Name: Jenna Tan E-mail: [email protected]

Rev. 1/1/03 PAX Technology Limited Date: July 5, 2024 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: V5PIM254GBW and FCC ID: V5PIM25BW Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Schematics Block Diagram Parts List Operation Description Tune up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ________________________ Contact Person: Jenna Tan E-mail: [email protected]

PAX Technology Limited Date: July 5, 2024 Power of Attorney To whom it may concern, Please be notified that I, Jenna Tan, have designated Jim Tsai in Sporton International Inc. as the person being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Jim Tsai in Sporton International Inc., on the matters of relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C 862. This authorization is limited to the product of as following: FCC ID: V5PIM254GBW FCC ID: V5PIM25BW FCC ID: V5PIM25 If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely yours, ____ Contact Person: Jenna Tan E-mail: [email protected]

1/1 PAX Technology Limited Date: July 5, 2024 Federal Communications Commission Authorization and Evaluation Division RE : Certification Application FCC ID: V5PIM254GBW FCC ID: V5PIM25BW FCC ID: V5PIM25 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, Public Notice DA 04-1705 of the Commission’s policy and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days:  External Photos  Internal Photos  Test set-up photos  Users Manual The application contains technical information, which PAX Technology Limited deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely, ____ Contact Person: Jenna Tan E-mail: [email protected]

Sporton International Inc. (Shenzhen) Page Number : 1 of 8 TEL : +86-755-86379589 / FAX : +86-755-86379595 Report Issued Date : Jul. 04, 2024 FCC ID : V5PIM25BW Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA452701-01 RF Exposure Evaluation Report APPLICANT : PAX Technology Limited EQUIPMENT : UNATTENDED PAYMENT TERMINAL BRAND NAME : PAX MODEL NAME : IM25 FCC ID : V5PIM25BW STANDARD : 47 CFR Part 2.1091 FCC KDB 447498 D01 v06 The product evaluation date was started from Jun. 27, 2024 and completed on Jun. 27, 2024. We, Sporton International Inc. (Shenzhen), would like to declare that the device has been evaluated in accordance with 47 CFR Part 2.1091 and FCC KDB 447498 D01 v06, and pass the limit. Without written approval of Sporton International Inc. (Shenzhen), the test report shall not be reproduced except in full. Approved by: Si Zhang Sporton International Inc. (Shenzhen) 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 People’s Republic of China Sporton International Inc. (Shenzhen) Page Number : 2 of 8 TEL : +86-755-86379589 / FAX : +86-755-86379595 Report Issued Date : Jul. 04, 2024 FCC ID : V5PIM25BW Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA452701-01 Table of Contents 1. ADMINISTRATION DATA ........................................................................................................................... 4 1.1. Testing Laboratory ............................................................................................................................. 4 2. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 5 3. MAXIMUM RF AVERAGE OUTPUT TUNE UP POWER AMONG PRODUCTION UNITS ....................... 6 4. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 7 5. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ............................................................... 8 5.1. Standalone Power Density Calculation ............................................................................................. 8 5.2. Collocated Power Density Calculation ............................................................................................... 8 Sporton International Inc. (Shenzhen) Page Number : 3 of 8 TEL : +86-755-86379589 / FAX : +86-755-86379595 Report Issued Date : Jul. 04, 2024 FCC ID : V5PIM25BW Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA452701-01 Revision History REPORT NO. VERSION DESCRIPTION ISSUED DATE FA452701-01 Rev. 01 Initial issue of report. Jul. 04, 2024 Sporton International Inc. (Shenzhen) Page Number : 4 of 8 TEL : +86-755-86379589 / FAX : +86-755-86379595 Report Issued Date : Jul. 04, 2024 FCC ID : V5PIM25BW Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA452701-01 1. Administration Data 1.1. Testing Laboratory Sporton International Inc. (Shenzhen) is accredited to ISO/IEC 17025:2017 by American Association for Laboratory Accreditation with Certificate Number 5145.01. Testing Laboratory Test Firm Sporton International Inc. (Shenzhen) Test Site Location 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 People’s Republic of China TEL: +86-755-86379589 FAX: +86-755-86379595 Test Site No. Sporton Site No. FCC Designation No. FCC Test Firm Registration No. SAR01-SZ CN1256 421272 Applicant Company Name PAX Technology Limited Address Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong Manufacturer Company Name PAX Computer Technology (Shenzhen) Co., Ltd. Address Room 701, PAX Technology Building, Shanxia Community, Pinghu Sub-district, Longgang District, Shenzhen, China Sporton International Inc. (Shenzhen) Page Number : 5 of 8 TEL : +86-755-86379589 / FAX : +86-755-86379595 Report Issued Date : Jul. 04, 2024 FCC ID : V5PIM25BW Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA452701-01 2. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type UNATTENDED PAYMENT TERMINAL Brand Name PAX Model Name IM25 FCC ID V5PIM25BW Wireless Technology and Frequency Range WLAN 2.4GHz Band: 2412 MHz ~ 2462 MHz WLAN 5.2GHz Band: 5180 MHz ~ 5240 MHz WLAN 5.3GHz Band: 5260 MHz ~ 5320 MHz WLAN 5.5GHz Band: 5500 MHz ~ 5700 MHz WLAN 5.8GHz Band: 5745 MHz ~ 5825 MHz Bluetooth: 2402 MHz ~ 2480 MHz NFC : 13.56 MHz Mode WLAN 2.4GHz 802.11b/g/n HT20 WLAN 5GHz 802.11a/n HT20/HT40 WLAN 5GHz 802.11ac VHT20/VHT40/VHT80 Bluetooth BR/EDR/LE NFC:ASK Antenna Type WLAN/Bluetooth: FPC Antenna NFC: FPC Antenna HW Version NA SW Version NA EUT Stage Production Unit Remark: 1. The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. 2. This is a variant report for IM25, the change note please refer to the IM25_Operational Description of Product Equality Declaration exhibit submitted. and the differences do not affect the MPE analysis results, and all Bands leverage from original report which can be referred to Sporton Report Number FA452701. Comments and Explanations: 1. The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. 2. The maximum RF output tune up power, antenna gain also the safe distance used for evaluate RF exposure were declared by manufacturer. Antenna Gain: WIFI Gain (dBi) Bluetooth -1.83 WLAN 2.4GHz -1.83 WLAN 5.2GHz 3.06 WLAN 5.3GHz 3.19 WLAN 5.5GHz 2.87 WLAN 5.8GHz 2.68 Sporton International Inc. (Shenzhen) Page Number : 6 of 8 TEL : +86-755-86379589 / FAX : +86-755-86379595 Report Issued Date : Jul. 04, 2024 FCC ID : V5PIM25BW Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA452701-01 3. Maximum RF average output tune up power among product…

Text truncated - open the document above for the full version.

Contents: 1.Antenna Passive Test 2. Device Profile 3. WiFi Antenna Test 4. Antenna size 东莞市一佳电子通讯科技有限公司 Tester : Li Guang Lei Approval : Yin Tao Date : 2024 /06/18 Antenna Test Report 真诚务实开拓创新 Project name IM25 Name of antenna WIFI Antenna form FPC antenna Radiate Omni-directional Polarization Line polarization Equipment Equipment ManufacturerModel N0.Last CAL.Due Date Network Analyzer AgilentE5071C2023.12.312024.12.30 CMW500 R&SCMW5002023.12.312024.12.30 Agilent E5071c S Parameter Test /WiFi Antenna Passive Test For WiFi/BT Antenna(2.4G) Freq (MHz) Effi (%) Effi (dB) Gain (dBi) 2400 32.29-4.91-1.83 2410 31.26-5.05-1.94 2420 29.48-5.31-2.17 2430 27.43-5.62-2.51 2440 25.24-5.98-2.82 2450 22.67-6.44-3.33 2460 20.93-6.79-3.63 2470 20.15-6.96-3.78 2480 19.81-7.03-3.83 2490 20.18-6.95-3.69 2500 21.07-6.76-3.48 Radiation Pattern For WiFi/BT Antenna(2400MHz) Radiation Pattern For WiFi/BT Antenna(2450MHz) Radiation Pattern For WiFi/BT Antenna(2500MHz) Passive Test For WiFi Antenna(5.8G) Freq (MHz) Effi (%) Effi (dB) Gain (dBi) 515047.19-3.262.77 521048.92-3.13.06 527048.17-3.173.17 533046.23-3.353.19 539050.5-2.973.53 545048.9-3.113.26 551043.15-3.652.78 557044.43-3.522.73 563047.8-3.212.87 569045.48-3.422.64 575041.53-3.822.42 581041.67-3.82.68 585040.08-3.972.68 Radiation Pattern For WiFiAntenna(5150MHz) Radiation Pattern For WiFiAntenna(5310MHz) Radiation Pattern For WiFiAntenna(5550MHz) Radiation Pattern For WiFiAntenna(5850MHz) IM25 NFC Antenna NFC Dimension: 90.70mm(L)*61.50mm(W) Antenna Type：FPC；

Sporton International Inc. (ShenZhen) Page Number : 1 of 17 TEL : +86-755-8637-9589 Report Issued Date : Jul. 04, 2024 FAX : +86-755-8637-9595 Report Version : Rev. 01 Report Template No.: SCE Version 1.0 FCC RF Test Report Report No. : 452701-01A Spot Check Evaluation APPLICANT : PAX Technology Limited EQUIPMENT : UNATTENDED PAYMENT TERMINAL BRAND NAME : PAX MODEL NAME : IM25 FCC ID : V5PIM25BW STANDARD : 47 CFR Part 15 Subpart C §15.247 47 CFR Part 15 Subpart E §15.407 47 CFR Part 15 Subpart C §15.225 TEST DATE(S) : Jun. 12, 2024 ~ Jun. 27, 2024 We, Sporton International Inc. (Shenzhen), would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International Inc. (Shenzhen), the test report shall not be reproduced except in full. Approved by: Jason Jia Sporton International Inc. (ShenZhen) 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 People’s Republic of China Sporton International Inc. (ShenZhen) Page Number : 2 of 17 TEL : +86-755-8637-9589 Report Issued Date : Jul. 04, 2024 FAX : +86-755-8637-9595 Report Version : Rev. 01 Report Template No.: SCE Version 1.0 FCC RF Test Report Report No. : 452701-01A TABLE OF CONTENTS REVISION HISTORY .......................................................................................................................................... 3 1 GENERAL DESCRIPTION .......................................................................................................................... 4 1.1. Applicant ............................................................................................................................................ 4 1.2. Manufacturer ...................................................................................................................................... 4 1.3. Product Feature of Equipment Under Test ........................................................................................ 4 1.4. Modification of EUT ........................................................................................................................... 4 1.5. Support Unit used in test configuration and system .......................................................................... 4 1.6. Testing Site ........................................................................................................................................ 5 1.7. Test Software ..................................................................................................................................... 5 1.8. Applicable Standards ......................................................................................................................... 6 2 RE-USE OF MEASURED DATA ................................................................................................................. 7 2.1 Introduction Section ........................................................................................................................... 7 2.2 Model Difference Information ............................................................................................................ 7 2.3 Reference detail Section: .................................................................................................................. 8 2.4 Spot Check Verification Data Section................................................................................................ 8 3 LIST OF MEASURING EQUIPMENT ........................................................................................................ 12 4 MEASUREMENT UNCERTAINTY ............................................................................................................ 15 APPENDIX A. SETUP PHOTOGRAPHS Sporton International Inc. (ShenZhen) Page Number : 3 of 17 TEL : +86-755-8637-9589 Report Issued Date : Jul. 04, 2024 FAX : +86-755-8637-9595 Report Version : Rev. 01 Report Template No.: SCE Version 1.0 FCC RF Test Report Report No. : 452701-01A REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE 452701-01A Rev. 01 Initial issue of report Jul. 04, 2024 Conformity Assessment Condition: 1. The test results (PASS/FAIL) with all measurement uncertainty excluded are presented against the regulation limits or in accordance with the requirements stipulated by the applicant/manufacturer who shall bear all the risks of non-compliance that may potentially occur if measurement uncertainty is taken into account. 2. The measurement uncertainty please refer to each test result in the section “Measurement Uncertainty” Disclaimer: The product specifications of the EUT presented in the test report that may affect the test assessments are declared by the manufacturer who shall take full responsibility for the authenticity. Sporton International Inc. (ShenZhen) Page Number : 4 of 17 TEL : +86-755-8637-9589 Report Issued Date : Jul. 04, 2024 FAX : +86-755-8637-9595 Report Version : Rev. 01 Report Template No.: SCE Version 1.0 FCC RF Test Report Report No. : 452701-01A 1 General Description 1.1. Applicant PAX Technology Limited Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong 1.2. Manufacturer PAX Computer Technology (Shenzhen) Co., Ltd. Room 701, PAX Technology Building, Shanxia Community, Pinghu Sub-district, Longgang District, Shenzhen, China 1.3. Product Feature of Equipment Under Test Product Feature Equipment UNATTENDED PAYMENT TERMINAL Brand Name PAX Model Name IM25 FCC ID V5PIM25BW SN Code Conducted/DFS: 3080000706 Conduction: 3080000722 Radiation: 3080000707 HW Version NA SW Version NA EUT Stage Production Unit Remark: 1. The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. 2. The WLAN and Bluetooth cannot tra…

Text truncated - open the document above for the full version.

Sporton International Inc. (ShenZhen) Page Number : 1 of 59 TEL : +86-755-8637-9589 Report Issued Date : Jul. 04, 2024 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5PIM254GBW Report Template No.: BU5-FR15CBT Version 2.0 FCC RF Test Report Report No. : FR452701A FCC RF Test Report APPLICANT : PAX Technology Limited EQUIPMENT : UNATTENDED PAYMENT TERMINAL BRAND NAME : PAX MODEL NAME : IM25 FCC ID : V5PIM254GBW STANDARD : FCC Part 15 Subpart C §15.247 CLASSIFICATION : (DSS) Spread Spectrum Transmitter TEST DATE(S) : Jun. 06, 2024 ~ Jun. 19, 2024 We, Sporton International Inc. (Shenzhen), would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International Inc. (Shenzhen), the test report shall not be reproduced except in full. Approved by: Jason Jia Sporton International Inc. (ShenZhen) 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 People’s Republic of China Sporton International Inc. (ShenZhen) Page Number : 2 of 59 TEL : +86-755-8637-9589 Report Issued Date : Jul. 04, 2024 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5PIM254GBW Report Template No.: BU5-FR15CBT Version 2.0 FCC RF Test Report Report No. : FR452701A TABLE OF CONTENTS REVISION HISTORY .......................................................................................................................................... 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .......................................................................................................................... 5 1.1 Applicant ............................................................................................................................................ 5 1.2 Manufacturer ...................................................................................................................................... 5 1.3 Product Feature of Equipment Under Test ........................................................................................ 5 1.4 Product Specification of Equipment Under Test ................................................................................ 5 1.5 Modification of EUT ........................................................................................................................... 6 1.6 Testing Location ................................................................................................................................ 6 1.7 Test Software ..................................................................................................................................... 6 1.8 Applicable Standards ......................................................................................................................... 7 2 TEST CONFIGURATION OF EQUIPMENT UNDER TEST ........................................................................ 8 2.1 Carrier Frequency Channel ............................................................................................................... 8 2.2 Test Mode .......................................................................................................................................... 9 2.3 Connection Diagram of Test System ............................................................................................... 10 2.4 Support Unit used in test configuration and system ........................................................................ 11 2.5 EUT Operation Test Setup .............................................................................................................. 11 2.6 Measurement Results Explanation Example ................................................................................... 11 3 TEST RESULT .......................................................................................................................................... 12 3.1 Number of Channel Measurement .................................................................................................. 12 3.2 Hopping Channel Separation Measurement ................................................................................... 14 3.3 Dwell Time Measurement ................................................................................................................ 20 3.4 20dB and 99% Bandwidth Measurement ........................................................................................ 22 3.5 Output Power Measurement ............................................................................................................ 33 3.6 Conducted Band Edges Measurement ........................................................................................... 34 3.7 Conducted Spurious Emission Measurement ................................................................................. 41 3.8 Radiated Band Edges and Spurious Emission Measurement ........................................................ 51 3.9 AC Conducted Emission Measurement........................................................................................... 55 3.10 Antenna Requirements .................................................................................................................... 57 4 LIST OF MEASURING EQUIPMENT ........................................................................................................ 58 5 MEASUREMENT UNCERTAINTY ............................................................................................................ 59 APPENDIX A. CONDUCTED TEST RESULTS APPENDIX B. AC CONDUCTED EMISSION TEST RESULT APPENDIX C. RADIATED SPURIOUS EMISSION APPENDIX D. DUTY CYCLE PLOTS APPENDIX E. SETUP PHOTOGRAPHS Spo…

Text truncated - open the document above for the full version.