V5PT3300Data Service Terminal

T3300 Data Service Terminal PAX Technology Limited 1. Contents Checklist Please check the components after unpacking. If any are missing, please contact the dealer. Name Qty T3300 Data Service Terminal 1 T3300 Base 1 USB Cable 1 Congratulations on receiving your PAX Technology payment terminal. We do hope you enjoy it! The box you have just opened should contain the following items:  1 x T3300 Data Service Terminal  1 x T3300 Base  1 x USB Cable 2.Description 3. Installation  Type-C port: Connect Power or Hub.  Type-C port: Connect USB device.  Pogopin Port: Connect Base device. 4. Instructions  Power ON/OFF  Power on: Press and hold the Power button (on the top side) for three seconds until the circular LED light up.  Power off: Press and hold the Power button (on the top side) for three seconds until the shutdown menu appears, tap “Shutdown”, The terminal will be turned off after a few seconds. 5. Specifications  Operation System: Linux  CPU: ARM Cortex-A7 DualCore,1GHz processor  Memory:128MB DDR3 DRAM, 128MB NAND Flash ROM  Display:1.54 Inch, resolution:240*240, single-touch capacitive touch screen.  Audio: Built-in speaker/Built-in MIC  Camera: 2 mega-pixel camera  Wireless Communication: Support Wi-Fi ® 2.4/5G, Bluetooth ® 5.0  Peripheral Ports: 1 x Type-C ports,1 x Pogo pin port  Type-C power port:DC 5V+/- 5% 1A 6. Terminal Installation and Usage Tips 1) Please use in the normal environment indoor and outdoor,avoid wet and water. 2) Instal the T3300 Base. Plug in TypeC port in the Base. 3) Place the T3300 in the right direction as the Description picture shows. 4) The T3300 will Power ON when place T3300 on the Base. 5) Press the power Key to shutdown the T3300 when not use it. Press the power Key utill the shutdown menu appears, press the menu to shutdown T3300. 6) Charge the T3300 in two ways: Place T3300 on the Base with Type C plug in or plug Type C into T3300. PAX Technology Limited reserves the right to change product technology specifications at any time. 7. Specification  Avoid placing this product in direct sunlight for extended periods, nor in environments with excessively high temperature, moisture or dust.  Only qualified personnel should repair this product.  Do not plug/unplug any units of the product when it is power on, otherwise it may damage the internal circuit. 8. Important Safety Warning  Do not place the terminal or battery in direct sunlight, nor in environments with excessively high temperatures, smoke, dust, or dampness.  Do not attempt to disassemble the battery, nor insert or use foreign objects to penetrate the casing. Never place the battery in a fire or excessively hot surfaces. Take care not to drop the battery. Excessive external shocks or pressure could cause battery liquid leakage or result in the battery catching fire or even exploding. Keep the battery well away from children and animals.  Immediately replace any battery which appears to be deformed, expanded or in an overheated state.  We recommend you only use power adaptors supplied by PAX Technology. If you must use 3 rd party supplier accessories, please ensure specifications meet exactly those recommended for our products, which must comply with international and local regulations & standards. Non-compatible power supplies, chargers or batteries could cause fires or even explosions, and will invalidate any product warranty.  Charge the battery when the indicator level is low, but make sure to never charge a battery continuously for more than 24 hours. If a battery is not used for a long time, please charge it at least once every 6 months to avoid overcharge or discharge damage. For long-term optimal product performance, it is recommended that a battery be replaced after 2 years of continual usage.  When disposing of the device, battery, or accessories, please do so responsibly and according to local regulations. These are not household waste items. Improper disposal of the battery could cause a fire or explosion, and any liquid leakage could be damaging to the environment and toxic to humans & animals. Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types); • Disposal of a battery into _re or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion; • Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of _ammable liquid or gas; • A battery subjected to extremely low air pressure that may result in an explosion or the leakage of _ammable liquid or gas. FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Caution…

Text truncated - open the document above for the full version.

PAX Technology Limited Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Hong Kong China Date: November 14, 2022 Declaration To whom it may concern, This is a WLAN/Bluetooth combination antenna with FCC ID: V5PT3300. This WLAN/Bluetooth co-existence mechanism is to ensure that the WLAN and Bluetooth transmitters would not simultaneously operate. Therefore, WLAN and Bluetooth antenna in FCC ID: V5PT3300 should not be considered to be able to transmit simultaneously. Though the users can use WLAN and Bluetooth simultaneously, but the real situation is that WLAN and Bluetooth are used by time sharing and no overlap transmission. Should you have any question, please have my best attention. Sincerely yours, _______________ Jenna Tan PAX Technology Limited Tel: 86-755-86156663 Fax: 86-755-86156663 E-mail: [email protected]

PAX Technology Limited Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Hong Kong China Date: November 14, 2022 Federal Communications Commission 7435 Oakland Mills Road - Gate A Columbia, Maryland 21046 Subject: Request for Confidentiality FCC ID: V5PT3300 To Whom It May Concern, Pursuant to the provisions of (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Parts List Operational Description FCC software operational description Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. External Photos Internal Photos Test Setup Photos Users Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, _______________ Jenna Tan PAX Technology Limited Tel: 86-755-86156663 Fax: 86-755-86156663 E-mail: [email protected]

PAX Technology Limited Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Hong Kong China Date: November 14, 2022 Power of Attorney To whom it may concern, Please be notified that I, Jenna Tan, have designated Joey Lao of Bureau Veritas 7Layers Communications Technology (Shenzhen) Co., Ltd as the person being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Joey Lao of Bureau Veritas 7Layers Communications Technology (Shenzhen) Co. Ltd on the matters relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. As defined in 47 CFR Ch. 1.U.S.C. 862, we further certify that neither the applicant nor any party to this application is subject to a denial to Federal benefits, including FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act. This authorization is limited to the product of as following: FCC ID: V5PT3300 If you have any acknowledgement and response, please send it to Joey Lao of Bureau Veritas 7Layers Communications Technology (Shenzhen) Co., Ltd directly. Should you have any question or comment regarding this matter, please have my best attention. Sincerely yours, _______________ Jenna Tan PAX Technology Limited Tel: 86-755-86156663 Fax: 86-755-86156663 E-mail: [email protected]

PAX Technology Limited Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Hong Kong China Date: November 14, 2022 Declaration We, PAX Technology Limited, declare that the device, FCC ID: V5PT3300, does not support any non-US channels in all the operational mode(s). All non-US frequencies, US 2.4G channel 12-13 and Country code selection are disabled through proprietary software and are not user changeable. Should you have any question or comment regarding this matter, please do not hesitate to contact me. Sincerely yours, _______________ Jenna Tan PAX Technology Limited Tel: 86-755-86156663 Fax: 86-755-86156663 E-mail: [email protected]

BV 7Layers Communications Technology (Shenzhen) Co., Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 1 of 7 Report Version 1 Reference No.: W7L-P22090035 FCC ID: V5PT3300 PHOTOGRAPHS OF THE EUT BV 7Layers Communications Technology (Shenzhen) Co., Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 2 of 7 Report Version 1 Reference No.: W7L-P22090035 FCC ID: V5PT3300 BV 7Layers Communications Technology (Shenzhen) Co., Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 3 of 7 Report Version 1 Reference No.: W7L-P22090035 FCC ID: V5PT3300 BV 7Layers Communications Technology (Shenzhen) Co., Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 4 of 7 Report Version 1 Reference No.: W7L-P22090035 FCC ID: V5PT3300 BV 7Layers Communications Technology (Shenzhen) Co., Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 5 of 7 Report Version 1 Reference No.: W7L-P22090035 FCC ID: V5PT3300 BV 7Layers Communications Technology (Shenzhen) Co., Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 6 of 7 Report Version 1 Reference No.: W7L-P22090035 FCC ID: V5PT3300 BV 7Layers Communications Technology (Shenzhen) Co., Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 7 of 7 Report Version 1 Reference No.: W7L-P22090035 FCC ID: V5PT3300

BV 7Layers Communications Technology (Shenzhen) Co., Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 1 of 12 Report Version 1 Reference No.: W7L-P22090035 FCC ID: V5PT3300 PHOTOGRAPHS OF THE EUT BV 7Layers Communications Technology (Shenzhen) Co., Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 2 of 12 Report Version 1 Reference No.: W7L-P22090035 FCC ID: V5PT3300 BV 7Layers Communications Technology (Shenzhen) Co., Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 3 of 12 Report Version 1 Reference No.: W7L-P22090035 FCC ID: V5PT3300 BV 7Layers Communications Technology (Shenzhen) Co., Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 4 of 12 Report Version 1 Reference No.: W7L-P22090035 FCC ID: V5PT3300 BV 7Layers Communications Technology (Shenzhen) Co., Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 5 of 12 Report Version 1 Reference No.: W7L-P22090035 FCC ID: V5PT3300 BV 7Layers Communications Technology (Shenzhen) Co., Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 6 of 12 Report Version 1 Reference No.: W7L-P22090035 FCC ID: V5PT3300 BV 7Layers Communications Technology (Shenzhen) Co., Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 7 of 12 Report Version 1 Reference No.: W7L-P22090035 FCC ID: V5PT3300 BV 7Layers Communications Technology (Shenzhen) Co., Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 8 of 12 Report Version 1 Reference No.: W7L-P22090035 FCC ID: V5PT3300 BV 7Layers Communications Technology (Shenzhen) Co., Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 9 of 12 Report Version 1 Reference No.: W7L-P22090035 FCC ID: V5PT3300 BV 7Layers Communications Technology (Shenzhen) Co., Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 10 of 12 Report Version 1 Reference No.: W7L-P22090035 FCC ID: V5PT3300 BV 7Layers Communications Technology (Shenzhen) Co., Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 11 of 12 Report Version 1 Reference No.: W7L-P22090035 FCC ID: V5PT3300 BV 7Layers Communications Technology (Shenzhen) Co., Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 12 of 12 Report Version 1 Reference No.: W7L-P22090035 FCC ID: V5PT3300

BV 7Layers Communications Technology (Shenzhen) Co., Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 1 of 95 Test Report No.: W7L-P22090035RF01 FCC TEST REPORT (Part 15, Subpart C) Applicant: PAX Technology Limited Address: Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong Manufacturer or Supplier: PAX Computer Technology (Shenzhen) Co., Ltd. Address: 401 and 402, Building 3, Shenzhen Software Park, Nanshan District, Shenzhen City, Guangdong Province, P.R.C Product: Data Service Terminal Brand Name: PAX Model Name: T3300 FCC ID: V5PT3300 Date of tests: Oct. 08, 2022 ~ Oct. 26, 2022 The tests have been carried out according to the requirements of the following standard: FCC Part 15, Subpart C, Section 15.247 ANSI C63.10-2013 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Prepared by Simon Wang Engineer / Mobile Department Approved by Luke Lu Manager / Mobile Department Date: Oct. 26, 2022 Date: Oct. 26, 2022 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. BV 7Layers Communications Technology (Shenzhen) Co., Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 2 of 95 Test Report No.: W7L-P22090035RF01 TABLE OF CONTENTS RELEASE CONTROL RECORD ....................................................................................................... 5 1 SUMMARY OF TEST RESULTS ............................................................................................... 6 1.1 MEASUREMENT UNCERTAINTY ........................................................................................ 7 2 GENERAL INFORMATION ....................................................................................................... 8 2.1 GENERAL DESCRIPTION OF EUT ..................................................................................... 8 2.2 DESCRIPTION OF TEST MODES ....................................................................................... 9 2.2.1 CONFIGURATION OF SYSTEM UNDER TEST ........................................................ 10 2.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................. 10 2.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ................................................... 12 2.4 DESCRIPTION OF SUPPORT UNITS ................................................................................ 12 3 TEST TYPES AND RESULTS ................................................................................................. 13 3.1 CONDUCTED EMISSION MEASUREMENT...................................................................... 13 3.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .......................................... 13 3.1.2 TEST INSTRUMENTS ................................................................ ................................ 13 3.1.3 TEST PROCEDURES ................................................................................................ 13 3.1.4 DEVIATION FROM TEST STANDARD ...................................................................... 14 3.1.5 TEST SETUP .............................................................................................................. 14 3.1.6 EUT OPERATING CONDITIONS ............................................................................... 14 3.1.7 TEST RESULTS ......................................................................................................... 15 3.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT ............................................ 17 3.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .................. 17 3.2.2 TEST INSTRUMENTS ................................................................................................ 18 3.2.3 TEST PROCEDURES ................................................................................................ 19 3.2.4 DEVIATION FROM TEST STANDARD ...................................................................... 19 3.2.5 TEST SETUP .............................................................................................................. 20 3.2.6 EUT …

Text truncated - open the document above for the full version.

FCC SAR Test Report Report Format Version 5.0.0Issued Date : Oct. 31, 2022 Report No. : W7L-P22090035SA01 FCC SAR Test Report Report No. : W7L-P22090035SA01 Applicant : PAX Technology Limited Address : Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong Manufacturer : PAX Computer Technology (Shenzhen) Co., Ltd. Address : 401 and 402, Building 3, Shenzhen Software Park, Nanshan District, Shenzhen City, Guangdong Province, P.R.C Product : Data Service Terminal FCC ID : V5PT3300 Brand : PAX Model No. : T3300 Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1992 / IEEE 1528:2013 KDB 865664 D01 v01r04 / KDB 865664 D02 v01r02 / KDB 248227 D01 v02r02 KDB 447498 D04 v01 Sample Received Date : Oct. 14, 2022 Date of Testing : Oct. 19, 2022 ~ Oct. 21, 2022 FCC Designation No. : CN1171 FCC Site Registration No. : 525120 CERTIFICATION: The above equipment have been tested by BV 7LAYERS COMMUNICATIONS TECHNOLOGY (SHENZHEN) CO. LTD., and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by A2LA or any government agencies . Prepared By : Approved By : Jerry Chen / Engineer Luke Lu / Manager This report is governed by, and incorporates by reference, CPS Conditions of Service as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about- us/terms-conditions/and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. FCC SAR Test Report Report Format Version 5.0.0 Issued Date : Oct. 31, 2022 Report No. : W7L-P22090035SA01 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot.................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 14 3.4 SAR Measurement Procedure ................................................................................................................................... 15 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 15 3.4.2 Volume Scan Procedure................................................................................................................................... 15 3.4.3 Power…

Text truncated - open the document above for the full version.

FCC SAR Test Report Report Format Version 5.0.0 Issued Date : Oct. 31, 2022 Report No. : W7L-P22090035SA01 Appendix D. Photographs of EUT and Setup

Vendor Name： YiJia Electronic Communications Technology Co., Ltd. Specification for Approval Client Name： PAX Computer Technology(ShenZhen) Co.,LTD Brand Name： YiJia Part No： YJS01.086.111.301…

Text truncated - open the document above for the full version.