VA5JR561FM433433 MHz Car alarm

TABLE OF CONTENTS Page 2 Page 3 1. Safety Information Page 3 2. Remote-Pager : 2W9000Pro, 2W9000Pro - 2 nd w/LCD Page 4 3. Color LCD Page 4 4. Description of Rmote Appearance Page 5 5. LCD Icons Page 6 6. Remote-Pager Button Functions Page 7 7. More Button Functions Page 8 8. Remote-Pager Learn Routine Page 9 9. Alarm Mode Page 9 10. Dual Stage Shock Sensor Page 10 11. Auto-Start Function Page 10 12. Reservation Mode Page 1113. Canceling Reservation Mode Page 1214. Trunk Release Page 13 15. Query Function Page 13 16. Panic Mode Page 13 17. Valet Mode Page 14 18. Timer Start Mode Page 14 19. Safety Shut Down Features Page 14 20. R.P.S (Remote Paging System) Page 15 21. Optional Programmable Features Page 15 Ignition Lock Page 15 Passive Arming Page 15 Turbo Mode Page 16 2 nd car Mode Page 16 22. Optional installaton Features Page 17 Cold Start Mode Page 17 Optional Auxiliary 1 & Auxiliary 2 Page 17 ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ ᴍᴍᴍᴍᴍᴍᴍᴍ Safety Information Please take these safety precautions under the following conditions: 1. Servicing the vehicle When servicing (i.e. changing the oil, washing your car) your automobile, theMAGICAR system should be in Valet Mode. There is a safety shutdown switch under the hood that deactivates the remote starter function if the hood is open. However, if the switch has been damaged or the switch has been installed improperly, the vehicle may start when Button II is pressed for 2 seconds even if the hood is open. 2. Loaning your vehicle to others Whenever you loan your vehicle to an individual who is not familiar with Compustar,please put the vehicle in Valet mode. This will prevent the vehicle loaner from accidentally activating the MAGICAR auto-security system. 3. For manual transmission vehicles If the MAGICAR 2W9000Pro,2W9000Pro-2 nd is installed in a manual transmission vehicle, extra precautions are required because the MAGICAR does not monitor the gear shift: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residental installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communica-tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, whitch can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:--Reorient or relocate the receiving antenna.--Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to witch the receiver is connected. --consult the dealer or an experienced radio/TV technician for help. Page 4 4. Color LCD Page 5 The remote-pager comes with GLO which is a unique color LCD displaythat visually tells the vehicle owner the security status of your car at all times. There are differing icons that will appear on your GLO LCD indicating what your vehicle is currently doing. Color LCD Page 5 Page 4 Description of Remote Appearance Rear The model name, 2W9000Pro, 2W9000Pro -2 nd stands for 2 Way FM 4 Button Remote. 2W9000Pro-2 nd 2W9000Pro Important! Under normal circumstances, Reservation Mode is cancelled when a door or hatchback opens. Please verify if the opening of any door or hatchback cancels Reservation Mode. If any of the doors or hatchback is not monitored by MAGICAR because of improper installation or a faulty dome light switch, do not use the MAGICAR and take your vehicle to the dealer immediately for repair. Do not set Reservation Mode when the window(s) are open or if there is anyone inside of the vehicle including animals. Remote-Pager : 2W9000Pro/ 2W9000Pro2 nd w/LCD The model name, 2W9000Pro, 2W9000Pro -2 nd stands for Two Way Frequency Modulation Remote with Liquid Crystal Display . This transmitter that allows you to activate multiple functions by pressing acombination of 4 buttons on the unit in order to transmit signals. ff ’’  ŽŽ ”” rr ……  ’’ Page 7 Remote-Pager Button Functions 12345678 9 1011 1/2 sec1/2 sec1/2 sec II III IV II - I , I - (I + II) 1/2 sec1/2 sec1/2 sec1/2 sec 2 sec2 sec2 sec Alarm Mode - on/off, RPS - on/off, Siren Off, Starter Kill (Anti-Grind) -on/off AUX 1 AUX 2 Query Function Trunk Release Auto-start Function – on/off Panic, Press I to shut off Siren. Siren Chirps – on/offValet Mode – on/offPassive Arming – on/offTimer Start Mode – on/offTurbo Mode - on/off (2W9000Pro) 2 nd Car-on/off (2W9000Pro-2 nd ) Shock Sensor – on/off Button PressedFor Function 12131415 (I + III) (II + III) (II + IV) (III + IV) (I + III) - (I + II) - (I + IV) - 1/2 sec1/2 sec 2 sec2 sec2 sec Programming Menu 1 - Installer OnlyProgramming Menu 2 - Installer Only Note : "" Represents pressing the button for 2 seconds. " ( ) " Represents simultaneously pressing the buttons. " ( ) " Represents simultaneously pressing the buttons for 2 seconds. Page 6 LCD Icons Indicates that someone is paging you from your vehicle. Display if your car is lock or unlcok Indicates that you…

Text truncated - open the document above for the full version.

SEGI LIMITED Date: 4th of June, 2007 Compliance Certification Services Certification Division 561F Monterey Road Morgan Hill, CA 95037 To whom it may concern: We, the undersigned, hereby authorize Korea Testing Laboratory, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Korea Testing Laboratory, on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing Korea Testing Laboratory as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, (Ko Byung Joon / Assistant Research Engineer) (SEGI LIMITED) REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us.

SEGI LIMITED Room 1808, 18/F, Tower 2, Admiralty Center, 18 Harcourt Road, Admiralty, Hongkong E-MAIL : [email protected] Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Attention : Equipment Authorization Branch REQUEST FOR CONFIDENTIALITY Pursuant to Sections 0.457 (d) and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of some of the information accompanying this Application of FCC ID : VA5JR561FM433 and as outlined below: 1. Block Diagram 2. Schematic Diagram These materials contain trade secrets and proprietary information not customarily released to the public and the public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d) disclosure of this Application . Sincerely, Date 4th of June , 2007 By byung joon Title : Assistant Research Engineer ============================================================

Dear Lucy Tsai These are my answers. Q#1: Application indicates the ID is VA5JR5161FM433 which is different from user manual and test report/label format. In user manual, test report and label format, the FCC ID is VA5JR561FM433 and user manual also contains another FCC ID: O44JR561FM433. Please confirm which one is correct and do the proper revise as well. Ans) FCC ID : VA5JR561FM433 is right. I attached revised user manual. Q#2: Please confirm that this device transmits with Pulse Modulation at 433.92 MHz and not Frequency Modulation as stated in the user manual. Does this device receive an FM signal? Ans) This device uses FSK modulation (pulse coded signal). This device receive an FM signal. Q#3: Are there any automatic transmissions or does this only transmit when a button is pressed? Ans) The data is transmitted always with a control signal and there's no automatic transmissions. This device always transmits in accordance with the requirements of 15.231 Thankyou. Best Regards, sung-kyu Cho From: Lucy Tsai [mailto:[email protected]] Sent: Wednesday, September 05, 2007 5:03 AM To: [email protected] Subject: FW: SEGI LIMITED, FCC ID: VA5JR516FM433, Assessment NO.: AN07T7163, Notice#1 Dear Mr. Cho, One more issue is added as Q#3, please address it as well. Best Regards Lucy Tsai Technical Review Engineer Compliance Certification Services 47173 Benicia Street Fremont, CA 94538 Direct: (510) 771-1131 Fax: (510) 661-0888 Main: (510) 771-1000 Web Site and TCB Electronic Filing System :http://www.ccsemc.com -----Original Message----- From: Lucy Tsai Sent: Tuesday, September 04, 2007 12:54 PM To: [email protected] Cc: Lucy Tsai Subject: SEGI LIMITED, FCC ID: VA5JR516FM433, Assessment NO.: AN07T7163, Notice#1 Hi Mr. Cho, Please address the following issues. Q#1: Application indicates the ID is VA5JR5161FM433 which is different from user manual and test report/label format. In user manual, test report and label format, the FCC ID is VA5JR561FM433 and user manual also contains another FCC ID: O44JR561FM433. Please confirm which one is correct and do the proper revise as well. Q#2: Please confirm that this device transmits with Pulse Modulation at 433.92 MHz and not Frequency Modulation as stated in the user manual. Does this device receive an FM signal? Q#3: Are there any automatic transmissions or does this only transmit when a button is pressed? Best Regards, Lucy Tsai Technical Review Engineer Compliance Certification Services 47173 Benicia Street Fremont, CA 94538 Direct: (510) 771-1131 Fax: (510) 661-0888 Main: (510) 771-1000 Web Site and TCB Electronic Filing System :http://www.ccsemc.com The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal and forfeiture of the filing fee. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender.

VA5 VA5VA5 VA5J JJ JR561FM R561FMR561FM R561FM433 433433 433 Circuit Descriptions. Circuit Descriptions. Circuit Descriptions. Circuit Descriptions. Block 1: U100 can make the modulation by this block. By switching(between 0V and 3V) at VD1 the frequency modulation is done. Block 2: This is the oscillation circuit to radiate the radio frequency. Block 3: The third harmonic frequency 433.92MHz of block2 will be amplified at this By Q7, L17, C48. Block 4: Besides 433.92MHz will be removed by filter(L16, C46). Block5: The third harmonic frequency 433.92MHz of block3 will be amplified at this By Q6, L15, C43 Block6: Besides 433.92MHz will be removed by filter(L14, C40). Block7: This frequency 433.92MHz of block5 will be amplified at this by Q5, L13, C37. Block8: Besides 433.92MHz of removed by filter(L12, C32, C33, C34, C35). Block9: This is the LNA(Low Noise Amplify) circuit. Block10: This is the oscillation circuit to radiate the local oscillation frequency. X1 oscillates 433.92MHz(RX) by L10, L11, C20, C21. Block11: This is the mixer circuit. Which is amplified at block9 and is generated at block10(Q3, L7). Block 12: This is the oscillation circuit to radiate the second local oscillation frequency. By XT1, C30, C31. Block 13: This is the FM demodulation IC circuit. Block 14: This is the micro-controller. This block is consist of block 15, block16, block17, block18, block19, block20, Block21. Block 15: This is the radio frequency power enable and disable control circuit. Block 16: This is the real time circuit. Block 17: XT1 supply the real time clock to the U100 Block 18: The buttons of this product. When being pressed this remote starts to work. Block 19: This is the vibration motor circuit. Block 20: This is the buzzer circuit. Block 21: This is the LCD circuit.

< FCC ID : < FCC ID : < FCC ID : < FCC ID : VA5JR561FM433 VA5JR561FM433 VA5JR561FM433 VA5JR561FM433 > >>> Transmission Data Format Transmission Data FormatTransmission Data FormatTransmission Data Format SYNC SYNCSYNCSYNC Low Bit Low BitLow BitLow Bit High Bit High BitHigh BitHigh Bit Data DataDataData Format Format Format Format End EndEndEnd 1Word 1Word 1Word 1Word Data DataDataData Format FormatFormatFormat Content ContentContentContent - Total Number Of Data : 54 Bit - MIN Word Data Time Length : MIN 88.06msec - MAX Word Data Time Length : MAX 111msec

Report No.: 07-1341-021 Page 1 of 15 Pages 222-13, Guro3-Dong Guro-Gu Seoul 152-718, Korea. Tel. : +82-2-860-1463 http://www.ktl.re.kr Fax. : +82-2-860-1468 FP-204-03-01 TEST REPORT 1. Applicant Name : SEGI LIMITED Address : 2. Products Name : Security/Remote Control transceiver(Car Alarm System) Model/Type : 2W9000Pro Manufacturer : SEGI LIMITED 3. Test Standard : 4. Test Method : ANSI C63.4-2003, RSS-GEN-2007 5. Test Result : Positive 6. Date of Application : June 01, 2007 7. Date of Issue : July 31, 2007 Tested by Approved by ` Sung-Kyu Cho Seok-Jin Kim Telecommunication Team Engineer Telecommunication Team Manager The test results contained apply only to the test sample(s) supplied by the applicant, and this test report shall not be reproduced in full or in part without approval of the KTL in advance. Chenjiapucun, Liaobu Town, Dongguan City, Guan gdong Province, P.R.China(523-408) FCC CFR 47 Part 15, Subpart C section 15.231(a) & IC RSS 210 Annex I-2007 Report No.: 07-1341-021 Page 2 of 15 Pages 222-13, Guro3-Dong Guro-Gu Seoul 152-718, Korea. Tel. : +82-2-860-1463 http://www.ktl.re.kr Fax. : +82-2-860-1468 FP-204-03-01 TABLE OF CONTENTS I. GENERAL INFORMATION 3 1. Applicant(client) 2. Equipment(EUT) 3. Testing Laboratory II. SUMMARY OF TEST RESULTS 4 III. TEST RESULT 5 3.1 Transmitter Radiated Emissions 3.2 Bandwidth of Momentary Signals 3.3 Receiver Radiated Emissions IV. TEST EQUIPMENTS 15 Report No.: 07-1341-021 Page 3 of 15 Pages 222-13, Guro3-Dong Guro-Gu Seoul 152-718, Korea. Tel. : +82-2-860-1463 http://www.ktl.re.kr Fax. : +82-2-860-1468 FP-204-03-01 I. GENERAL INFORMATIONS 1.1 Applicant (Client) Name SEGI LIMITED Address Chenjiapucun, Liaobu Town, Dongguan City, Guangdong Province, P.R.China(523-408) Contact Person Byung joon - Ko Telephone No. +86-769-8322-4133(175) Facsimile No. +86-769-8322-4130 E-mail address [email protected] 1.2 Equipment (EUT) Type of equipment Security/Remote Control transceiver(Two-way Car Alarm System) Model Name 2W9000Pro FCC ID VA5JR561FM433 IC ID 7087A-R561FM433 Operating Frequency 433.92 MHz Type of Signal Pulse Code Signal Power Source DC 1.5V (Battery) Manufacturer Name SEGI LIMITED Manufacturer Address Chenjiapucun, Liaobu Town, Dongguan City, Guangdong Province, P.R.China(523-408) 1.3 Testing Laboratory Testing Place Korea Testing Labortory (KTL) 222-13 Guro-dong, Guro-Gu, Seoul 152-848 Korea Test Engineer Sungkyu Cho Telephone number +82 2 860 1463 Facsimile number +82 2 860 1468 E-mail address [email protected] Other Comments Report No.: 07-1341-021 Page 4 of 15 Pages 222-13, Guro3-Dong Guro-Gu Seoul 152-718, Korea. Tel. : +82-2-860-1463 http://www.ktl.re.kr Fax. : +82-2-860-1468 FP-204-03-01 . IISUMMARY OF TEST RESULTS The 2W9000Pro has been found to conform as detailed below. FCC IC Test Requirements Result 15.231(a) A1.1.1 Provisionss of FCC 15.231 & IC RSS210 A1.1 Pass 15.231(b) A1.1.2 Transmitter Radiated Emissions – Fundamental, Harmonic and Spurious Pass 15.231(c) A1.1.3 20 dB & 99% Bandwidth Pass 15.109(a) Table 2 Receiver Radiated Emissions Pass Report No.: 07-1341-021 Page 5 of 15 Pages 222-13, Guro3-Dong Guro-Gu Seoul 152-718, Korea. Tel. : +82-2-860-1463 http://www.ktl.re.kr Fax. : +82-2-860-1468 FP-204-03-01 III. TEST RESULTS 3.1. Transmitter Spurious Emissions (FCC Part 15.231(a) & RSS-210 A1.1.2) 3.1.1 Test procedure 3.1.1.1 Preliminary Testing for Reference Preliminary testing was performed in a KTL absorber-lined room to determine the emission characteristics of the EUT. The EUT was placed on the wooden table which has dimensions of 0.8 meters in height, 1 meter in length and 1.5 meters in width. Receiving antenna (Biconi-Log antenna : 30 to 1000 MHz or Horn Antenna : 1 to 18 GHz) was placed at the distance of 1 meter from the EUT. An attempt was made to maximize the emission level with the various configurations of the EUT while rotating the table and varying antenna height. Emissions level from the EUT with various configurations were examined on a Spectrum Analyzer connected with an RF amplifier and graphed by a plotter. 3.1.1.2 Final Radiated Emission Test at an Absorber-Lined Room The final measurement of radiated field strength was carried out in a KTL Absorber-Lined Room that was listed up at FCC according to the "Radiated Emissions Testing" procedure specified by ANSI C63.4. Based on the test results in preliminary test, measurement was made in same test set up and configuration which produced maximum emission level. Receiving antenna was installed at 3-meter distance from the EUT, and was connected to an EMI receiver. Receiving antenna polarization was changed vertical and horizontal. The worst value was recorded. Turntable was rotated through 360 degrees and receiving antenna height was varied from 1 to 4 meters above the ground plane to read maximum emission level. If necessary, the radiated emission measurements could be performed at a closer distance than specified distance to ensure higher accuracy and their results were extrapolated to the specified distance using an inverse linear distance extrapolation factor (20 dB/decade) as per Section 15.31(f). The maximum emission level from the EUT occurred in such configuration as shown in the following photograph. Report No.: 07-1341-021 Page 6 of 15 Pages 222-13, Guro3-Dong Guro-Gu Seoul 152-718, Korea. Tel. : +82-2-860-1463 http://www.ktl.re.kr Fax. : +82-2-860-1468 FP-204-03-01 3.1.2. Photograph for the test configuration 3.1.3 Limit Fundamental Field Strength of Field Strength of Frequency Fundamental Spurious Emission (MHz) (microvolts/meter) (microvolts/meter) ------------------------------------------------------------------------------------------------------------------------- 40.66–40.70 1,000 100 70-130 500 50 130-174 500 to 1,500** 50 to 150** 174-260 1,500 150 260-470 1,500 to 5,000** 150 to 500** Above 470 5,000 500 -------------------------------------------------------------------------------------------------------------------------- ** linear…

Text truncated - open the document above for the full version.