VD2-HSG1164Tablet PC HANNSpad

1 Directions Meanings of icons: Forbidding: forbid improper operations to avoid damaging the Tablet PC. Caution: cautions for operators to avoid potential damages. Please note and remember. Importance: important information, common notes, definitions, general knowledge and references, etc. Other trademarks and trade name may be used in this manual to refer to either the entities claiming the marks and names or their products. The manufacture disclaims any proprietary interest in trademarks and trade names other than its own. Information in this manual is subject to change without notice. Reproduction in any manner whatsoever without the written permission from the manufacture is strictly forbidden. Product images in this manual are for your reference only. 2 Content Directions .......................................................................................................................... 1 Safety Precautions ........................................................................................................... 3 FCC Compliance ............................................................................................................... 4 1 Knowing Your Tablet PC ............................................................................................... 5 1-1 Front View ............................................................................................................... 5 1-2 Left View ................................................................................................................. 6 1-3 Top View ................................................................................................................. 6 1-4 Bottom View ............................................................................................................ 6 1-5 Rear View ............................................................................................................... 6 2 Caring the Tablet PC ..................................................................................................... 7 2-1 LCD Screen ............................................................................................................ 7 2-2 Other accessories ................................................................................................... 7 2-3 If the water comes into the Tablet PC ..................................................................... 8 2-4 Other Notes ............................................................................................................. 8 3 Traveling with the Tablet PC ........................................................................................ 9 4 Getting Started ............................................................................................................. 10 4-1 Connecting the Power Adapter ............................................................................. 10 4-2 Turning on the Tablet PC ...................................................................................... 10 5 Get to know your system ............................................................................................ 11 6 System Settings ........................................................................................................... 12 7 Communication ........................................................................................................... 14 8 Fun ................................................................................................................................ 16 9 Spare Parts ................................................................................................................... 18 9 Upgrading Your Tablet PC .......................................................................................... 19 9-1 Connect the External Monitor ............................................................................... 19 9-1-1 Connecting the HDMI-equipped Device .......................................................... 19 9-1-2 Inserting SD Card ........................................................................................... 19 9-1-3 Connecting to PC ............................................................................................ 19 10 Appendix .................................................................................................................... 20 10-1 Troubleshooting .................................................................................................. 20 10-2 Specifications ...................................................................................................... 21 3 Safety Precautions 1. DO NOT press or touch the LCD Screen. DO NOT place the Tablet PC with small items, they may scratch LCD Screen or enter the Tablet PC. 2. DO NOT expose the Tablet PC to dirty or dusty environment. Keep the environment clean and dry. 3. DO NOT place the Tablet PC on uneven or unstable work surface. 4. DO NOT place or drop objects on the top of the Tablet PC. DO NOT shove any foreign objects into the Tablet PC. DO NOT cover the LCD Screen strongly. 5. DO NOT expose the Tablet PC to strong magnetic or electrical fields; DO NOT place the floppy disk near or on the Tablet PC, that may loss the data of the floppy disk. 6. DO NOT leave the Tablet PC facing the sun as it can damage the LCD Screen, especially in the car. 7. SAFE TEMP: This Tablet PC should only be used in environments with ambient temperatures between 5°C(41°F) and 35°C(95°F). 8. DO NOT expose the Tablet PC to or use near liquids, rain, or moisture. 9. Caution: risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 10. DO NOT throw the Tablet PC in municipal waste. Check local regulations for disposal of electronic products. Please recycle the Battery Pack, and check with your Local Authority or retailer for recycling advice. 11. The Tablet PC and the Adapter may occur some heat dur…

Text truncated - open the document above for the full version.

Attestation for FCC Declaration of Conformity FCC ID: VD2-HSG1164 Date: Nov 19, 2010 Please be notified that we, the undersigned, Cerpass technology Coporation declares that the product which bears the above FCC ID is a;so compliant with the FCC requirements for DOC. The test report number supporting the DOC is SEFD1010029. Testing in regards to this report was done by Cerpass technology Coporation, located at No. 7-2, Moshihkeng, Fongtian Village, Shihding Township, Taipei County, Taiwan, R.O.C., which has been accredited in accordance to all of the requirements of 47 CFR 2.948(d) and(e)of the FCC rules and KDB349827. Sincerely, Anson Chou / Manager Tel: +886-2-26558100#5301 Fax: +886-2-26558200 Email: [email protected]

AHTHORIZATION LETTER FCC ID: VD2-HSG1164 Date: Nov 19, 2010 To whom it may concern: We, the undersigned, hereby authorize Cerpass Technology (Suzhou) Co., Ltd. of China to act on our behalf, as our agent, in the following matters related to the FCC approval of our products: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by Cerpass Technology (Suzhou) Co., Ltd. within the scope of this authorization shall have the same effects as our own. This authorization shall expire 2 weeks from original data. If you have any questions regarding the authorization, please don’t hesitate to contact me. We also authorize Teleconformity, Mr. M. Koop, (address: Rietven 31, 7534NH Enschede, Netherlands) to process this application. Thank you. Yours Sincerely, Alfred Lan , Director Hannspree Inc

Hannspree Inc Date: Nov 19, 2010 Federal Communications Commission Authorization and Evaluation Division FCC ID: VD2-HSG1164 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: 1 Schematics 2 Operational Description 3 Block Diagram. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Alfred Lan , Director Hannspree Inc

HANNSpad (Model name: HSG1164) Exterior Photographs: 1) 2) 3) 4) 5) 6) adapter 7) adapter 8) adapter 9) adapter 8) adapter 9) adapter 8) adapter

HANNSpad (Model name: HSG1164) Inside photo: 1) 2) 3) 4) 5) 6) 7) 8) 9) 10)

CERPASS TECHNOLOGY CORP. Report No.: SSAR1010029 FCC ID: VD2-HSG1164 Cerpass Technology Corp. Issued Date : 12/8/2010 Tel:886-512-6917-5888 Fax:886-512-6917-5666 Page No. : 1 of 129 Report No.: SSAR1010029 Client : Hannspree Inc. Product : HANNSpad Model : HSG1164 FCC ID : VD2-HSG1164 Manufacturer/ supplier : WANLIDA GROUP CO., LTD Date test item received : Nov 18,2010 Date test campaign completed : Nov 21,2010 Date of issue : Nov 22,2010 Test Result : љCompliance ϭNot Compliance Statement of Compliance: The SAR values measured for the test sample are below the maximum recommended level of 1.6 W/kg averaged over any 1g tissue according to FCC OET Bulletin 65 Supplement C(Edition 01-01, June 2001) The test result only corresponds to the tested sample. It is not permitted to copy this report, in part or in full, without the permission of the test laboratory. Total number of pages of this test report: 111 pages Test Engineer: Approved by: ___________________ __________________ Jack Li Clinton Kao The testing described in this report has been carried out to the best of our knowledge and ability, and our responsibility is limited to the exercise of reasonable care. This certification is not intended to believe the sellers from their legal and/or contractual obligations. SAR Evaluation Report for FCC OET Bulletin 65 Supplement C and Industry Standard RSS-102 Issue2 CERPASS TECHNOLOGY CORP. Report No.: SSAR1010029 FCC ID: VD2-HSG1164 Cerpass Technology Corp. Issued Date : 12/8/2010 Tel:886-512-6917-5888 Fax:886-512-6917-5666 Page No. : 2 of 129 Applicant Information Client: Hannspree Inc. Address: 4F.,No.48,Wucyuan Rd.,Wugu lndustrial Zone,Taipei County 248,Taiwan Manufacturer: WANLIDA GROUP CO., LTD Address: WANLIDA INDUSTRY ZONE, NANJING ,FUJIAN, CHINA. EUT: HANNSpad Model No. : HSG1164 Standard Applied : FCC OET 65 Supplement C (Edition 01-01, June 2001) IEEE Standard 1528-2003 Laboratory : CERPASS TECHNOLOGY CORP. No.66,Tangzhuang Road, Suzhou Industrial Park, Jiangsu 215006, China. Test Location : No.789, Pu Xing Road, Shanghai, China Test Result : Maximum SAR Measurement 802.11b: 0.790 W/kg(1g) 802.11g: 0.716 W/kg(1g) 802.11n, HT20: 0.266 W/kg(1g) The HANNSpad is in compliance with the FCC Report and Order 93-326 and Health Canada Safety Code 6, and the tests were performed according to the FCC OET65c for uncontrolled exposure. CERPASS TECHNOLOGY CORP. Report No.: SSAR1010029 FCC ID: VD2-HSG1164 Cerpass Technology Corp. Issued Date : 12/8/2010 Tel:886-512-6917-5888 Fax:886-512-6917-5666 Page No. : 3 of 129 Contents 1. General Information ................................................................................................................................. 5 1.1.Description of Equipment under Test............................................................................................... 5 1.2.Photograph of EUT .......................................................................................................................... 5 1.3.Characteristics of Device ................................................................................................................. 6 1.4.Description of support units ............................................................................................................. 6 1.5.EnvironmentCondition .................................................................................................................... 7 1.6.FCC Requirement of SAR Compliance Testing ............................................................................... 7 1.7.The SAR Measurement Procedure.................................................................................................. 8 2. Description of the Test Equipment......................................................................................................... 9 2.1.Test Equipment List.......................................................................................................................... 9 2.2.ALSAS-10-U Measurement System ..............................................................................................10 2.3.DAQ-PAQ (Analog to Digital Electronics) .......................................................................................11 2.4.APREL Phantom............................................................................................................................ 12 2.5.Device Holder ................................................................................................................................ 13 2.6.Specification of probes................................................................................................................... 14 2.7.SAR Measurement Procedures in ALSAS-10-U............................................................................ 16 2.8.SimulatingLiquids.......................................................................................................................... 16 2.9.System Performance Check .......................................................................................................... 17 3. Results .................................................................................................................................................... 19 3.1.Summary of Test Results ............................................................................................................... 19 3.2.Description for EUT test position ................................................................................................... 19 3.3.Conducted power(Average) ........................................................................................................... 19 3.4.Check the position for the worst result........................................................................................... 21 3.5.Measurement Position ................................................................................................................... 22 4. The Description of Test …

Text truncated - open the document above for the full version.

ALSAS-10U VER 2.3.8.90 APREL Laboratories Page 1 of 6 SAR Test Report (11b mode bottom low) Report Date : 16-Nov-2010 By Operator : 123 Measurement Date : 16-Nov-2010 Starting Time : 16 -Nov-2010 09:19:34 AM End Time : 16-Nov-2010 09:34:42 AM Scanning Time : 908 secs Product Data Device Name : Computer Serial No. : 123 Type : Std Form Cell Phone Model : 123 Frequency : 2400.00 MHz Max. Transmit Pwr : 1 W Drift Time : 0 min(s) Length : 255 mm Width : 160 mm Depth : 10 mm Antenna Type : Internal Orientation : Touch Power Drift-Start : 0.392 W/kg Power Drift-Finish: 0.546 W/kg Power Drift (%) : 3.279 Picture : Phantom Data Name : APREL-Uni Type : Uni-Phantom Size (mm) : 280 x 280 x 200 Serial No. : User Define Location : Center Description : uni Tissue Data Type : BODY Serial No. : IAC Tissue - 2450 Frequency : 2450.00 MHz Last Calib. Date : 15-May-2008 Temperature : 20.00 °C Ambient Temp. : 20.00 °C Humidity : 50.00 RH% Epsilon : 48.01 F/m Sigma : 1.89 S/m Density : 1000.00 kg/cu. m ALSAS-10U VER 2.3.8.90 APREL Laboratories Page 2 of 6 Probe Data Name : IAC-273 Model : E020 Type : E-Field Triangle Serial No. : 273 Last Calib. Date : 13-Sep-2010 Frequency : 2450.00 MHz Duty Cycle Factor: 1 Conversion Factor: 3.6 Probe Sensitivity: 1.20 1.20 1.20 μV/(V/m) 2 Compression Point: 95.00 mV Offset : 1.56 mm Measurement Data Crest Factor : 1 Scan Type : Complete Tissue Temp. : 20.00 °C Ambient Temp. : 20.00 °C Set -up Date : 16-Nov-2010 Set-up Time : 9:19:30 AM Area Scan : 6x6x1 : Measurement x=10mm, y=10mm, z=4mm Zoom Scan : 5x5x8 : Measurement x=8mm, y=8mm, z=4mm Other Data DUT Position : Touch Separation : 0 Channel : Low ALSAS-10U VER 2.3.8.90 APREL Laboratories Page 3 of 6 Area Scan -20 -10 0 10 20 -20 -10 0 10 20 Y axis (mm) -20 -10 0 10 20 -20 -10 0 10 20 0.702 0.545 0.451 0.351 0.234 0.117 0.000 X axis (mm) ALSAS-10U VER 2.3.8.90 APREL Laboratories Page 4 of 6 1 gram SAR value : 0.602 W/kg 10 gram SAR value : 0.246 W/kg Area Scan Peak SAR : 0.700 W/kg Zoom Scan Peak SAR : 1.391 W/kg ALSAS-10U VER 2.3.8.90 APREL Laboratories Page 5 of 6 Exposure Assessment Measurement Uncertainty Source of Uncertainty Tolerance Value Probability Distribution Divisor c i 1 (1-g) c i 1 (10-g) Standard Uncertainty (1-g) % Standard Uncertainty (10-g) % Measurement System Probe Calibration 3.5 normal 1 1 1 3.5 3.5 Axial Isotropy 3.7 rectangular √3 (1- cp) 1/2 (1- cp) 1/2 1.5 1.5 Hemispherical Isotropy 10.9 rectangular √3 √cp √cp 4.4 4.4 Boundary Effect 1.0 rectangular √3 1 1 0.6 0.6 Linearity 4.7 rectangular √3 1 1 2.7 2.7 Detection Limit 1.0 rectangular √3 1 1 0.6 0.6 Readout Electronics 1.0 normal 1 1 1 1.0 1.0 Response Time 0.8 rectangular √3 1 1 0.5 0.5 Integration Time 1.7 rectangular √3 1 1 1.0 1.0 RF Ambient Condition 3.0 rectangular √3 1 1 1.7 1.7 Probe Positioner Mech. 0.4 rectangular √3 1 1 0.2 0.2 Restriction Probe Positioning with respect to Phantom Shell 2.9 rectangular √3 1 1 1.7 1.7 Extrapolation and Integration 3.7 rectangular √3 1 1 2.1 2.1 Test Sample Positioning 4.0 normal 1 1 1 4.0 4.0 Device Holder Uncertainty 2.0 normal 1 1 1 2.0 2.0 Drift of Output Power 39.3 rectangular √3 1 1 22.7 22.7 Phantom and Setup Phantom Uncertainty(shape & thickness tolerance) 3.4 rectangular √3 1 1 2.0 2.0 Liquid Conductivity(target) 5.0 rectangular √3 0.7 0.5 2.0 1.4 Liquid Conductivity(meas.) 3.1 normal 1 0.7 0.5 2.2 1.5 Liquid Permittivity(target) 5.0 rectangular √3 0.6 0.5 1.7 1.4 Liquid Permittivity(meas.) 8.9 normal 1 0.6 0.5 5.3 4.4 Combined Uncertainty RSS 25.2 24.9 Combined Uncertainty (coverage factor=2) Normal(k=2) 50.3 49.8 ALSAS-10U VER 2.3.8.90 APREL Laboratories Page 6 of 6 ALSAS-10U VER 2.3.8.90 APREL Laboratories SAR Test Report (11b mode bottom mid) Report Date : 16-Nov-2010 By Operator : 123 Measurement Date : 16-Nov-2010 Starting Time : 16 -Nov-2010 09:43:25 AM End Time : 16-Nov-2010 09:59:06 AM Scanning Time : 941 secs Product Data Device Name : Computer Serial No. : 123 Type : Std Form Cell Phone Model : 123 Frequency : 2400.00 MHz Max. Transmit Pwr : 1 W Drift Time : 0 min(s) Length : 255 mm Width : 160 mm Depth : 10 mm Antenna Type : Internal Orientation : Touch Power Drift-Start : 0.596 W/kg Power Drift-Finish: 0.634 W/kg Power Drift (%) : 6.378 Picture : Phantom Data Name : APREL-Uni Type : Uni-Phantom Size (mm) : 280 x 280 x 200 Serial No. : User Define Location : Center Description : uni Tissue Data Type : BODY Serial No. : IAC Tissue - 2450 Frequency : 2450.00 MHz Last Calib. Date : 15-May-2008 Temperature : 20.00 °C Ambient Temp. : 20.00 °C Humidity : 50.00 RH% Epsilon : 48.01 F/m Sigma : 1.89 S/m Density : 1000.00 kg/cu. m ALSAS-10U VER 2.3.8.90 APREL Laboratories Probe Data Name : IAC-273 Model : E020 Type : E-Field Triangle Serial No. : 273 Last Calib. Date : 13-Sep-2010 Frequency : 2450.00 MHz Duty Cycle Factor: 1 Conversion Factor: 3.6 Probe Sensitivity: 1.20 1.20 1.20 μV/(V/m) 2 Compression Point: 95.00 mV Offset : 1.56 mm Measurement Data Crest Factor : 1 Scan Type : Complete Tissue Temp. : 20.00 °C Ambient Temp. : 20.00 °C Set -up Date : 16-Nov-2010 Set-up Time : 9:42:52 AM Area Scan : 6x6x1 : Measurement x=10mm, y=10mm, z=4mm Zoom Scan : 5x5x8 : Measurement x=8mm, y=8mm, z=4mm Other Data DUT Position : Touch Separation : 0 Channel : Mid ALSAS-10U VER 2.3.8.90 APREL Laboratories Area Scan -20 -10 0 10 20 -20 -10 0 10 20 Y axis (mm) -20 -10 0 10 20 -20 -10 0 10 20 0.733 0.645 0.422 0.323 0.241 0.121 0.000 X axis (mm) ALSAS-10U VER 2.3.8.90 APREL Laboratories 1 gram SAR value : 0.609 W/kg 10 gram SAR value : 0.249 W/kg Area Scan Peak SAR : 0.737 W/kg Zoom Scan Peak SAR : 1.361 W/kg ALSAS-10U VER 2.3.8.90 APREL Laboratories Exposure Assessment Measurement Uncertainty Source of Uncertainty Tolerance Value Probability Distribution Divisor c i 1 (1-g) c i 1 (10-g) Standard Uncertainty (1-g) % Standard Uncertainty (10-g) % Measurement System Probe Calibration 3.5 normal 1 1 1 3.5 3.5 Axial Isotropy 3.7 rectangular √3 (1- cp) 1/2 (1- cp) 1/2 1.5 1.5 Hemispherical Isotropy 10.9 rectan…

Text truncated - open the document above for the full version.

CERPASS TECHNOLOGY CORP. Report No.: SEFI1010029-W Cerpass Technology Corp. Issued Date : Nov 13,2010 Tel:86-512-6917-5888 Fax: 86-512-6917-5666 Page No. : 1 of 244 FCC TEST REPORT According to FCC CFR Title 47 Part 15 Subpart C Applicant : Hannspree Inc. Address : 4F.,No.48,Wucyuan Rd.,Wugu lndustrial Zone,Taipei County 248,Taiwan Manufacture : WANLIDA GROUP CO., LTD Address : WANLIDA INDUSTRY ZONE, NANJING ,FUJIAN, CHINA. Equipment : HANNSpad Model No. : HSG1164 FCC ID : VD2-HSG1164 ‚ The test result refers exclusively to the test presented test model / sample. ‚ Without written approval of Cerpass Technology Corp. the test report shall not be reproduced except in full. ‚ The test report must not be used by the clients to claim product certification approval by NVLAP or any agency of the Government. CERPASS TECHNOLOGY CORP. Report No.: SEFI1010029-W Cerpass Technology Corp. Issued Date : Nov 13,2010 Tel:86-512-6917-5888 Fax: 86-512-6917-5666 Page No. : 2 of 244 Table of Contents 1. Report of Measurements and Examinations.............................................................................................6 2. Test Configuration of Equipment under Test............................................................................................7 2.1. Feature of Equipment under Test .................................................................................................... 7 2.2. Carrier Frequency of Channels ....................................................................................................... 8 2.3. Test Manner ..................................................................................................................................... 9 2.4. Description of Test System .............................................................................................................. 9 2.5. Connection Diagram of Test System ............................................................................................. 10 2.6. General Information of Test ............................................................................................................11 2.7. Measurement Uncertainty ..............................................................................................................11 3. Test of Conducted Emission ....................................................................................................................12 3.1. Test Limit........................................................................................................................................ 12 3.2. Test Procedures............................................................................................................................. 12 3.3. Typical Test Setup.......................................................................................................................... 13 3.4. Measurement Equipment .............................................................................................................. 13 3.5. Test Result and Data ..................................................................................................................... 14 4. Test of Radiated Emission........................................................................................................................20 4.1. Test Limit........................................................................................................................................ 20 4.2. Test Procedures............................................................................................................................. 20 4.3. Typical Test Setup.......................................................................................................................... 21 4.4. Measurement Equipment .............................................................................................................. 22 4.5. Test Result and Data ..................................................................................................................... 23 5. Occupied Bandwidth...............................................................................................................................203 5.1. Test Limit...................................................................................................................................... 203 5.2. Test Procedures........................................................................................................................... 203 5.3. Test Setup Layout ........................................................................................................................ 203 5.4. Measurement Equipment ............................................................................................................ 203 5.5. Test Result and Data ................................................................................................................... 204 6. Maximum Peak Output Power................................................................................................................210 6.1. Test Limit...................................................................................................................................... 210 6.2. Test Procedure ............................................................................................................................ 210 6.3. Test Setup Layout .........................................................................................................................211 6.4. Measurement Equipment .............................................................................................................211 6.5. Test Result and Data ................................................................................................................... 212 7. Band Edges..............................................................................................................................................218 7.1. Test Limit..…

Text truncated - open the document above for the full version.

HANNSpad (Model name: HSG1164) Test Photograph: Front View of Conducted Emission Test Back View of Conducted Emission Test Front View of Radiated Emission Test Back View of Radiated Emission Test