VDM2048910Wireless Transceiver

305 Commerce Drive Moorestown, NJ 08057-4234 Phone:(856)727-1100 Fax:(856)222-4847 January 20, 2015 Federal Communications Commission 445 12 th Street SW Washington, DC 20554 Subject: Limited Agency Agreement Re: We, OPEX Corporation, hereby authorized Intertek Testing Services to act as our agent for the purpose of preparing application for FCC ID number VDM2048910 under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is January 20, 2015. The limited agency agreement expires on August 7, 2015 unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely,

305 Commerce Drive Moorestown, NJ 08057-4234 Phone:(856)727-1100 Fax:(856)222-4847 Attention: Application Examiner Re: Request for confidentiality Applicant: OPEX Corporation FCC ID: VDM2048910 To whom it may concern, Request is hereby submitted by OPEX Corporation to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential:  Schematics  Detailed Block diagrams  Detailed Operational/Functional Description  User manual Rationale for request for confidentiality: OPEX Corporation has invested considerable time and materials in research and development to produce the referenced products. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by OPEX Corporation. Technical information pertaining to the equipment, including schematics, detailed block diagrams, detailed operational / functional description, and user’s manuals are issued to the equipment end user and are subject to the terms of a non-disclosure agreement entered by OPEX Corporation and equipment end user. Furthermore, equipment servicing and maintenance is performed by OPEX Corporation technicians. Permanent confidentiality of User manual of the referenced products is requested due to the specific requirement for licensee appointed service and installation of the referenced products. If you have questions or need further information, please contact the undersigned. Sincerely, Michael Powell Senior Member of Technical Staff OPEX Corporation

305 Commerce Drive Moorestown, NJ 08057-4234 Phone:(856)727-1100 Fax:(856)222-4847 Attention: Application Examiner Re: Professional installation justification Applicant: OPEX Corporation FCC ID: VDM2048910 To whom it may concern, OPEX Corporation hereby states that device 2048910, having FCC ID: VDM2048910: 1. Is not sold retail to the general public or by mail order. 2. The device is installed only by the Grantee’s (OPEX Corporation) trained installers as part of a larger system. 3. The intended application for the device is not for the general public. It is strictly for industry / commercial use. If you have questions or need further information, please contact the undersigned. Sincerely, Michael Powell Senior Member of Technical Staff OPEX Corporation

305 Commerce Drive Moorestown, NJ 08057-4234 Phone:(856)727-1100 Fax:(856)222-4847 RE FCC ID: VDM2048910 To the certification reviewer: We are hereby applying for limited modular approval of the above-referenced FCC ID, based on compliance with most of the criteria as detailed below. Sincerely, Michael Powell Senior Member of Technical Staff Part 15 Unlicensed Single Modular Transmitter Approval Justification per 15.212 Requirement per 15.212 reference (i) The radio elements of the modular transmitter must have their own RF shielding. Full shielding is not provided (ii) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided. All modulation and data inputs are buffered by circuitry on the transmitter chip. (iii) The modular transmitter must have its own power supply regulation. Power supply regulation is provided by circuitry on the transmitter module. Input voltage range is 3.3VDC to 16VDC (iv) The modular transmitter must comply with the antenna and transmission system requirements of §§ 15.203, 15.204(b) and 15.204(c). The application is intended for professional installation only. The module is professionally installed by the applicant, OPEX Corporation, and requires specific skills to configure the module. (v) The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with Part 15 parameters. Testing was performed with the module located inside of the intended host device. (vi) The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. A sample of the host label is provided as an exhibit, showing the FCC identifier of the module. The host devices tested include the OPEX ibot, and the OPEX Main Transceiver. (vii) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. The module complies fully with the operating requirements of Part 15 section 15.247 as demonstrated in the test report exhibit. (viii) The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. Compliance of the RF exposure requirements by MPE calculation at 20cm separation distance.

CONFIDENTIALITY & NON-DISCLOSURE AGREEMENT THIS AGREEMENT is dated as of ________________ between OPEX Corporation, having its principal office at 305 Commerce Drive, Moorestown, NJ, USA 08057-4234 (“OPEX”), and ______________________________________, having an office at ___________________________________________________________________(“Company”). In consideration of the mutual covenants herein contained, the parties agree as follows: 1. PURPOSE. The parties wish to assure the confidentiality of certain confidential and proprietary information and other materials which have been or may be revealed by or pass through a party to this Agreement (“Disclosing Party”) to the other party to this Agreement (“Receiving Party”) in the course of pursuing, evaluating, establishing, performing or continuing a business relationship (the “Engagement”). 2. CONFIDENTIAL INFORMATION. For purposes of this Agreement, "Confidential Information" shall mean and include, all tangible and intangible information and materials being disclosed in connection with the Engagement, in any form or medium (and without regard to whether the information is owned by either party or by a third party), that satisfy any one of the following criteria: (i) Information related to either party’s, or its affiliates’, trade secrets, customers (including identities, characteristics and activities), business plans, strategies, forecasts or forecast assumptions, operations, methods of doing business, records, finances, assets, intellectual property, technology (including computer software and hardware products, data bases, programs, data processing and communications networking systems), data, codes or other information that reveal the research, technology, practices, procedures, processes, methodologies, know how, or other systems or controls by which either party’s existing or future products, services, applications and methods of operations or doing business are developed, conducted or operated, and all information or materials derived therefrom or based thereon; (ii) Information designated as confidential in writing, whether by letter or an appropriate proprietary stamp or legend, prior to or at the time such information is disclosed; (iii) Information disclosed orally or visually, or in writing without an appropriate letter, proprietary stamp or legend, if it would be apparent to a reasonable person, familiar with either party’s business and the industry in which it operates, that such information is of a confidential or proprietary nature; (iv) Information related to the existence or content of the parties’ current communications, discussions, evaluations or negotiations in connection with a potential Engagement; and (v) Information of an OPEX-proprietary nature related to OPEX products and / or systems, including but not limited to schematics, electrical / block diagrams, operational / functional descriptions, user manuals, or service manuals. 3. LIMITATION ON OBLIGATIONS. The obligations of confidentiality assumed by the parties pursuant to this Agreement shall not apply to the extent the Receiving Party can demonstrate, by clear and convincing evidence, that such information: (i) is part of the public domain without any breach of this Agreement by the Receiving Party; (ii) was disclosed to it by a third party who is not required to maintain its confidentiality; (iii) was independently developed by the Receiving Party; or (iv) is the subject of a written agreement whereby either party consents to the disclosure of such Confidential Information by the Receiving Party on a non-confidential basis. 4. DUTY OF NON-DISCLOSURE AND SECURITY PRECAUTIONS. (a) The Receiving Party shall not use Confidential Information of the Disclosing Party for any purpose other than the limited purposes of the Engagement. The Receiving Party shall hold the Disclosing Party’s Confidential Information in confidence, and shall not disclose such Confidential Information to any persons other than those directors, officers, employees, agents, accountants and advisors of the Receiving Party and/or its affiliates (“Representatives”) who have a business-related need to have access to such Confidential Information in furtherance of the limited purposes of this Agreement and who have been apprised of, and agree to maintain, the confidential nature of such information in accordance with the terms of this Agreement. The Receiving Party shall be responsible for the breach of this Agreement by any of its Representatives. (b) The Receiving Party shall institute and/or maintain such procedures as are reasonably required to maintain the confidentiality of the Confidential Information, and shall apply at least the same level of care as it employs to protect its own confidential information of like nature. If the Receiving Party becomes aware of any actual or Confidentiality and Non-Disclosure Agreement Page 2 of 3 threatened breach of this Agreement (including any threatened or actual unauthorized use or disclosure of any Confidential Information), or in the event of any loss of, or inability to account for, Confidential Information previously received, the Receiving Party shall promptly notify the Disclosing Party and will reasonably cooperate with the Disclosing Party’s efforts to seek appropriate injunctive relief or otherwise to prevent or curtail such threatened or actual breach, or to recover its Confidential Information. (c) The Receiving Party shall ensure that all copyright or other proprietary notice or indication of confidentiality contained on or included in any item of Confidential Information shall be reproduced by the Receiving Party on any reproduction, modification or translation of such Confidential Information. If requested by the Disclosing Party, the Receiving Party shall make a reasonable effort to add a proprietary notice or indication of confidentiality to any tangible materials within its possession that contain Confidential Information of the D…

Text truncated - open the document above for the full version.

Contains FCC ID: VDM2048910 Contains IC: 7175A-2048910 Model: 2048910 OPEX® Corporation This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Non-Specific EMC Report Shell Rev. May 2014 Client: Opex Corporation, Model: 2048910 Page 1 of 111 EMISSIONS TEST REPORT Report Number: 102037004BOX-001c Project Number: G101718120 Report Issue Date: 06/16/2015 Product Designation: 2048910 Standards: CFR47 Part 15 Subpart C 15.247 (2014) CFR47 Part 15 Subpart B (2014) IC RSS-210 Issue 8 December 2010 Annex 8 IC RSS-Gen Issue 4 November 2014 IC ICES-003 Issue 5 August 2012 IC RSS-102 Issue 4 March 2010 updated December 2010 Tested by: Client: Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 U.S.A Opex Corporation 305 Commerce Drive Moorestown, NJ 08057 U.S.A Report prepared by Report reviewed by Kouma Sinn / Staff Engineer, EMC Vathana Ven / Staff Engineer, EMC Intertek Report Number: 102037004BOX-001c Issued: 06/16/2015 Non-Specific EMC Report Shell Rev. May 2014 Page 2 of 111 Client: Opex Corporation, Model: 2048910 1 Introduction and Conclusion The tests indicated in section 2.0 were performed on the product constructed as described in section 3.0. The remaining test sections are the verbatim text from the actual data sheets used during the investigation. These test sections include the test name, the specified test Method, a list of the actual Test Equipment Used, documentation Photos, Results and raw Data. No additions, deviations, or exclusions have been made from the standard(s) unless specifically noted. Based on the results of our investigation, we have concluded the product tested complies with the requirements of the standard(s) indicated. The results obtained in this test report pertain only to the item(s) tested. 2 Test Summary Section Test full name Result 3 Client Information -- 4 Description of Equipment Under Test -- 5 System Setup and Method -- 6 Maximum Peak Output Power, Human RF Exposure, & Duty Cycle CFR47 FCC Part 15 Subpart C (2014), Section 15.247 (b)(3) IC RSS-210 Issue 8 December 2010, A8.4 (4) IC RSS-102 Issue 4 March 2010 updated December 2010 Pass 7 Transmitter Radiated Spurious Emissions CFR47 FCC Part 15 Subpart C(2014), Section 15.247 (d) IC RSS-210 Issue 8 December 2010, A8.5 Pass 8 6 dB Bandwidth & 99% Power Bandwidth CFR47 FCC Part 15 Subpart C (2014), Section 15.247 (a)(2) IC RSS-210 Issue 8 December 2010, A8.2 (a) Pass 9 Power Spectral Density CFR47 FCC Part 15 Subpart C (2014), Section 15.247 (e) IC RSS-210 Issue 8 December 2010, A8.2 (b) Pass 10 Band-edge Compliance CFR47 FCC Part 15 Subpart C (2014), Section 15.247 (d) IC RSS-210 Issue 8 December 2010, A8.5 Pass 11 Digital Devices Radiated Spurious Emissions CFR47 FCC Part 15:2013 Subpart B Section 15.109 IC ICES-003 Issue 5 August 2012 Pass -- Receiver Radiated Spurious Emissions CFR47 FCC Part 15 Subpart B (2014), Section 15.109 IC RSS-Gen Issue 4 November 2014, Section 7 Exempt, above 960 MHz 12 AC Mains Conducted Emissions CFR47 FCC Part 15 Subpart B (2014), Section 15.207 IC RSS-Gen Issue 4 November 2014, 8.8 (Table 3) Pass 13 Revision History -- Intertek Report Number: 102037004BOX-001c Issued: 06/16/2015 Non-Specific EMC Report Shell Rev. May 2014 Page 3 of 111 Client: Opex Corporation, Model: 2048910 3 Client Information This EUT was tested at the request of: Company: Opex Corporation 305 Commerce Drive Moorestown, NJ 08057 U.S.A Contact: Mr. Michael Powell Telephone: (856) 727-1100 ext. 2267 Email: [email protected] 4 Description of Equipment Under Test Equipment Under Test Description Manufacturer Model Number Serial Number iBot-New Antennae V2 Opex Corporation 2048910 BOX1503021541-001 Receive Date: 07/11/2014 & 03/02/2015 Received Condition: Good Type: Production Description of Equipment Under Test (provided by client) The Opex iBOT is a small radio controlled robotic vehicle which runs in a track system as part of a larger automated sorting machine. It uses Zigbee, 0-QPSK Modulation operates at frequency range of 2405- 2480 MHz with a detachable antenna. Equipment Under Test Power Configuration Rated Voltage Rated Current Rated Frequency Number of Phases 100-240 VAC 1.3 A 50/60 Hz 1 Operating modes of the EUT: No. Descriptions of EUT Exercising 1 The iBOT was connected to a power supply which was powered by 120VAC. Opex Incorporated provided test commands to enable constant transmission at the maximum duty cycle that will be used in normal operation. Tests were performed on the high, middle, and low channels at maximum output power and in receive mode. Software used by the EUT: No. Descriptions of EUT Exercising 1 Hyperterminal through RS232 Intertek Report Number: 102037004BOX-001c Issued: 06/16/2015 Non-Specific EMC Report Shell Rev. May 2014 Page 4 of 111 Client: Opex Corporation, Model: 2048910 5 System Setup and Method Cables Qty Description Length (m) Shielding Ferrites Termination 1 AC Mains 2 None Yes AC Mains Support Equipment Description Manufacturer Model Number Serial Number Laptop* Dell P/N: PU982AW#ABA CNU6101PBW *Notes: The laptop was used to program the device then disconnected during testing. 5.1 Method: Configuration as required by ANSI C 63.4:2009, FCC Part 15 Subpart C (2014) Section 15.247, RSS-210…

Text truncated - open the document above for the full version.

Radiated Emissions Test Setup Antenna Port Conducted Test Setup