VFB-CT6540ARI6475TV Auxiliary Equipment

BROADCAST MICROWAVE SERVICES CT6540ARINC Reference Guide The picture is just for illustration and may differ from components supplied This document and the information contained in it is the property of Broadcast Microwave Services Inc. and may be the subject of patents pending and granted. It must not be used for commercial purposes nor copied, disclosed, reproduced, stored in a retrieval system or transmitted in any form or by any means (electronic, mechanical, photocopying, recording or otherwise), whether in whole or in part, without prior written agreement issued by BMS. Copyright © 2009 Broadcast Microwave Services, Inc. All rights reserved. Broadcast Microwave Services Europe GmbH Schwalbacherstraße 12 65321 Heidenrod, Germany Tel: +49 (6124) 7239 00 Fax: +49 (6124) 7239 29 E-Mail: [email protected] Internet: www.bms-inc.com Broadcast Microwave Services, Inc. 12367 Crosthwaite Circle, Dock 10 Poway, CA 92064 Tel: +1 (858) 391-3050 • Toll-free (US): 800-669-9667 Fax: +1 (858) 391-3049 Email: [email protected] Internet: www.bms-inc.com A Contents Contents 1 About This Reference Guide .................................................................1 1.1 Read this first .............................................................................1 1.2 Versions of this Reference Guide...............................................3 1.3 Designation and P/N ..................................................................3 2 Safety Warnings .....................................................................................4 2.1 Registered and General Trademarks .........................................4 2.2 EMC Compliance .......................................................................5 2.3 Compliance ................................................................................5 2.4 C-Tick Marking ...........................................................................5 2.5 CE Marking.................................................................................5 2.6 FCC Marking ..............................................................................5 2.7 RTCA/DO-160 ............................................................................5 3 Installing the Transmitter ......................................................................6 3.1 ARINC Mounting Plate ...............................................................7 3.2 Mounting Instructions .................................................................8 4 Dismounting the Transmitter ..............................................................11 5 Controlling the System ........................................................................12 6 Technical Specifications .....................................................................16 6.1 CE Marking...............................................................................16 6.2 FCC Marking ............................................................................16 6.3 C-Tick Marking .........................................................................17 6.4 Safety .......................................................................................17 6.5 Signal Parameters....................................................................18 6.6 Connectors Transmitter............................................................19 6.7 Connectors Control Panel ........................................................21 6.8 Cabling and Connectors Overview ...........................................22 6.9 Cable DC for ARINC Control Panel..........................................23 6.10 Cable CT6540ARINC (CONTROL) to ARINC Control Panel ...23 6.11 Cable Actuator to ARINC Control Panel...................................24 6.12 Programming Cable for ARINC Control Panel .........................24 B Contents 7 Warranty................................................................................................25 8 Glossary ................................................................................................27 9 Index ......................................................................................................31 10 Contact Information .............................................................................33 10.1 Customer Support ....................................................................33 10.2 Training Courses ......................................................................33 10.3 Claims ......................................................................................33 C List of Figures List of Figures Figure 1: Ventilation Openings ...........................................................................7 Figure 2: Mounting Plate Overview ....................................................................7 Figure 3: Retainer Locations...............................................................................8 Figure 4: Fixing the Transmitter .........................................................................8 Figure 5: Locking the Transmitter ......................................................................8 Figure 6: Mounted Transmitter ...........................................................................9 Figure 7: CT6540ARINC Connector Panel .........................................................9 Figure 8: Control panel connectors (with actuator control).........................10 Figure 9: Control panel connector (without actuator control) .......................10 Figure 10: Control panel with actuator switch ................................................12 Figure 11: Control panel without actuator switch...........................................12 Figure 12: Cabling and Connectors Overview ................................................22 Figure 13: DC cabling for ARINC Control Panel (PT06SE-12-4S) ..................23 Figure 14: CT6540ARINC to ARINC Control Panel cabling ............................23 Figure 15: Actuator to Control Panel C…

Text truncated - open the document above for the full version.

CONFIDENTIALITY REQUEST Rev. 1.0 Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Dear Sir/Madam: Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, Broadcast Microwave Service Europe GmbH (BMS Europe) requests confidentiality for the following products: FCC ID Number Product Title/Model VFB-CT6540ARI-6475 CT6540ARINC For the product stated above, we request that the following information be held confidential: 1. Schematics and BOM submitted as Equipment Authorization Electronic Filing attachment: "11_2535_000_schematics”. 2. Block diagram submitted as Equipment Authorization Electronic Filing attachment: “11_2535_000_BlockDiagram.pdf”. 3. Tune-up procedure and partlist submitted as “11_2535_000_PartList_TuneUpInfo.pdf” The above exhibits contain BMS Europe trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our mobile handset. This material is not customarily available to the general public and we request that it be withheld from public inspection. If you have any questions, please feel free to contact me at the address shown below. Signature of authorized person: Rainer Horn Sincerely, Name: Rainer Horn Company: Broadcast Microwave Services Europe GmbH Address: Schwalbacher Str.12, D-65321 Heidenrod Kemel Phone: +49 06124 7239 15 Email: [email protected]

Broadcast Microwave Services Europe GmbH Schwalbacher Str. 12 D-65321 Heidenrod-Kemel 29.07.2010Date: Name: C.Rothe Zeichnung Nr.: CT6540ARINC - 11.2535.000External Photo 1 Broadcast Microwave Services Europe GmbH Schwalbacher Str. 12 D-65321 Heidenrod-Kemel 29.07.2010Date: Name: C.Rothe Zeichnung Nr.: CT6540ARINC - 11.2535.000External Photo 2

CETECOM ICT Services GmbH Test report no.: 1-2107-01-04/10 2010-11-09 Page 75 of 80 External photographs of the EUT Photo No. 1 CETECOM ICT Services GmbH Test report no.: 1-2107-01-04/10 2010-11-09 Page 76 of 80 Photo No. 2 CETECOM ICT Services GmbH Test report no.: 1-2107-01-04/10 2010-11-09 Page 77 of 80 Photo No. 3 CETECOM ICT Services GmbH Test report no.: 1-2107-01-04/10 2010-11-09 Page 78 of 80 Photo No. 4 CETECOM ICT Services GmbH Test report no.: 1-2107-01-04/10 2010-11-09 Page 79 of 80 Photo No. 5 Photo No. 6 CETECOM ICT Services GmbH Test report no.: 1-2107-01-04/10 2010-11-09 Page 80 of 80 Photo No. 7

Broadcast Microwave Services Europe GmbH Schwalbacher Str. 12 D-65321 Heidenrod-Kemel 27.07.2010Date: Name: C.Rothe Zeichnung Nr.: CT6540ARINC - 11.2535.000Labelling Position Type/FCC labelposition

Broadcast Microwave Services Europe GmbH Schwalbacher Str. 12 D-65321 Heidenrod-Kemel 02.08.2010Date: Name: C.Rothe Zeichnung Nr.: CT6540ARINC - 11.2535.000Internal Photo 1 Broadcast Microwave Services Europe GmbH Schwalbacher Str. 12 D-65321 Heidenrod-Kemel 02.08.2010Date: Name: C.Rothe Zeichnung Nr.: CT6540ARINC - 11.2535.000Internal Photo 2

Broadcast Microwave Services Europe GmbH Operational Description CT6540ARINC 11.2535.000 Release 1v0 09.07.10/CR Broadcast Microwave Services Europe GmbH General Information on D-ENG (Digital Electronic News Gathering) The introduction of the DVB standard established the basis for digital broadcast video transmission making efficient use of the available bandwidth. Powerful compression algorithms allow a reduction in the amount of data to be transferred, while maintaining the high quality standards for video and audio signals used in broadcasting applications. New modulation techniques and error correction algorithms ensure a secure signal transmission even when the transmission conditions are poor. The DVB-T standard was established for terrestrial digital TV broadcasting, in particular considering the difficult conditions of radio transmission. The highly efficient OFDM multicarrier modulation procedure enables transmission without interference even under multipath propagation conditions occurring with non-directional transmission or reception. Practical experience soon has proved that the DVB-T standard guarantees ruggedness of transmission to an extent even allowing mobile reception. Increasing miniaturization, in particular of MPEG encoders and OFDM modulators, enables using the DVB-T standard for mobile portable transmission systems. Previous analog FM systems were adversely affected by signal reflections directly resulting in video and audio interferences. Such effects do not occur when the digital ENG system (D- ENG) is deployed. Even mobile transmission from moving vehicles or the use of omni- directional antennas on the transmitting or receiving side does not impair the picture or sound quality at all, opening a completely new range of applications in TV production and news gathering. Brief Description The transmitter CT6540ARINC allows using any SDI or HD-SDI camera with analogue audio input in a wireless environment. HD-SDI is an industrial standard. The video is taken from the camera by an (HD)-SDI-Interface (Encoder board). Analogue Audio from the camera is converted to digital data and packed with the SDI video data to an ASI format. Before modulation processing the packets are restamped and filled up to a constant data rate with stuff packets. The modulator is a COFDM modulator related to EN 300744 (ASI Modulator board 20.1492.011). The profile is 2k. The input stage auto detects the incoming data rate. OFDM (Orthogonal Frequency Division Multiplex) Modulation The digital data signal for wireless transmission is processed by the OFDM Modulator and following IQ Modulator. The OFDM modulation procedure has a major impact on the transmission properties and was specifically developed for terrestrial radio transmission. The transmitter follows the DVB-T standard (only at a higher frequency). The 2k mode is choosen for this kind of transmitters in 8MHz bandwidth. Details please find in ETS 300 744. Broadcast Microwave Services Europe GmbH This digital signal is converted in the next stage to analogue differential IQ values (two individual paths with 90° phase shift). The IQ-modulator (20.1448.011) converts the analogue baseband information direct into the RF domain at 6.425-6.525 GHz. The frequency is controlled by a PLL. The output power is around 1mW (0dBm). A power amplifier boost this signal to 5W/10W (37/40 dBm). Crestfactor and Output Power Due to the high efficient digital modulation within COFDM (ETS 300 744) there is a reasonable difference between average and peak power of the device. This so called Crest Factor is a statistical phenomenon. The transmitter has no clipping mechanism which limits (and corrupts) the outgoing signal. Typical assumption is a Crest-Factor of 10-12 dB at a probability of 10E-4. Several application notes explain this in detail, for example 7TS02_2D.pdf from Rhode&Schwarz. In all our datasheets the average power is given. This is measured with a thermal measurement head and a power meter. The average power is the only value which could be measured without any statistical influence and allows comparing systems. RF Connector The RF output signal of the Low-Power Amplifier is fed out at the N(f) connector on the transmitter front. The CT6540ARINC provides RF output of about 5W/10W (+37dBm/40dBm). Connecting Signal Sources The Video signal supplied by the camera has to be applied to the SDI BNC(f) connector of the transmitter. The Audio signal supplied by the camera has to be applied to the Audio in Amphenol 91 569783 35P connector of the transmitter. Connecting the RF Output An omni directional antenna with N(m) cable can be connected at the RF out socket. Linear Power Amplifier The linear power amplifier amplifies the output signal of the Modulator to an output of about 5W (+37 dBm) / 10W (+40) dBm). The output port is located on top of the device. The power amplifier has an ALC which guarantees constant output level. The energy is transmitted by an antenna to the corresponding receiver . Broadcast Microwave Services Europe GmbH Connecting the 28VDC Supply Voltage 28VDC; 12Amin.; P < 350W User interface With the HCP50 control panel or an RS232 Terminal you can change frequency or pre defined presets, output power, scrambling, Modulation, Video input. Technical Specifications Frequency 6425 – 6525 MHz Video Input HDSDI - BNC(f); CVBS – BNC(f) Audio Input 1x Analogue audio pair in (Line or Mic Level) – Amphenol 91 569783 35P Modulator COFDM, ETS 300744, 2k carriers Bandwidth: 8 MHz QPSK,16 QAM,64 QAM RF Output Power 5/10 W Power Input 28 VDC Power Consumption <350W Operating Conditions Ambient temperature -10°C to +50°C Dimensions over all (W x D x H) 216 mm x 124 mm x 250 mm Weight 5.5 kg approx The CT6540ARINC 11.2535.000 can be set from 6425MHz up to 6525MHz. in steps of 1MHz with a signal bandwidth of 6, 7 or 8 MHz. 6425 F[MHz] 6525 setup in steps of 1MHz 6426 6427 6, 7 or 8MHz

CETECOM ICT Services GmbH Untertürkheimer Straße 6-10 D-66117 Saarbrücken Phone: +49 (0) 681-598-0 Fax: -9075 RSC-Laboratory 2010-11-09 Page 1 of 80 Accredited testing-laboratory DAR registration number: DGA-PL-176/94-D1 Recognized by the Federal Communications Commission Anechoic chamber registration no.: 90462 (FCC) Anechoic chamber registration no.: 3462C-1 (IC) Certification ID: DE 0001 Accreditation ID: DE 0002 Accredited Bluetooth ® Test Facility (BQTF) The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Cetecom ICT is under license Test report no. : 1-2107-01-04/10 Type identification : CT6540ARINC6475 Applicant : Broadcast Microwave Services GmbH&Co.KG FCC ID : VFB-CT6540ARI6475 IC ID : 7191A-CT6540F6475 Test standards : FCC CFR 47 Part 74 IC SRSP-306.4 / 306.5 CETECOM ICT Services GmbH Test report no.: 1-2107-01-04/10 2010-11-09 Page 2 of 80 Table of contents 1 General information.................................................................................................. 3 1.1 Notes ...................................................................................................................................................................3 1.2 Testing laboratory ...............................................................................................................................................4 1.3 Details of applicant .............................................................................................................................................4 1.4 Application details ..............................................................................................................................................4 2 Technical tests.......................................................................................................... 5 2.1 Details of manufacturer.......................................................................................................................................5 2.1.1 Test item......................................................................................................................................................5 2.1.2 EUT operating modes..................................................................................................................................6 2.1.3 Nominal conditions for testing ....................................................................................................................6 3 Summary of measurement results and list of all performed test cases .......................... 7 4 RF measurement testing ............................................................................................ 8 4.1 Description of test set-up ....................................................................................................................................8 4.1.1 Radiated measurements...............................................................................................................................8 4.1.2 Conducted measurements............................................................................................................................9 4.2 Referenced documents ......................................................................................................................................10 4.3 Additional comments ........................................................................................................................................10 4.4 RF output power (conducted) §2.1046 / § 74.636(a) ........................................................................................11 4.5 RF output power (radiated) §2.1046 / § 74.636(a) ............................................................................................17 4.6 Occupied bandwidth §2.1049 / §74.637 (g) ......................................................................................................18 4.7 Emission mask §2.1051 / §74.637(a)(2) ...........................................................................................................33 4.8 Spurious emissions (conducted) §2.1051 / §74.637(a)(2) .................................................................................47 4.9 Band-edge compliance §2.1051 / §74.637(a)(2) ...............................................................................................54 4.10 Spurious emissions (radiated) §2.1051 / §74.637(a)(2) ................................................................................63 4.11 Frequency tolerance §2.1055 / §74.661 ........................................................................................................66 4.12 MPE calculation ............................................................................................................................................67 5 Test equipment and ancillaries used for tests ........................................................... 68 6 Photographs of the test setup................................................................................... 69 7 Internal photographs of the EUT ............................................................................. 70 External photographs of the EUT .................................................................................. 75 CETECOM ICT Services GmbH Test report no.: 1-2107-01-04/10 2010-11-09 Page 3 of 80 1 General information 1.1 Notes The test results of this test report relate exclusively to the test item specified in 3.1.1. The CETECOM ICT Services GmbH does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the CETECOM ICT Services GmbH. Test laboratory manager: 2010-11-09 Karsten Geraldy Da…

Text truncated - open the document above for the full version.

CETECOM ICT Services GmbH Test report no.: 1-2107-01-04/10 2010-11-09 Page 69 of 80 6 Photographs of the test setup Photo No. 1 Photo No. 2: