VG8TC934DYYMMicrowave Oven

Microwave Drawer Model: TC934D3TK Read these instructions carefully before using your microwave oven, and keep it carefully. If you follow the instructions, your oven will provide you with many years of good service. SAVE THESE INSTRUCTIONS CAREFULLY PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY (a) Do not attempt to operate this oven with the door open since open door operation can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks. (b) Do not place any object between the oven front face and the door or allows soil or cleaner residue to accumulate on sealing surfaces. (c) Do not operate the oven if it is damaged. It is particularly important that the oven door close properly and that there is no damage to the: (1) DOOR (bent) (2) HINGES AND LATCHES (broken or loosened) (3) DOOR SEALS AND SEALING SURFACES 2 (d) The oven should not be adjusted or repaired by anyone except properly qualified service personnel. Specifications Model TC934D3TK Rated Voltage/Frequency 120VAC 60Hz Microwave Input 1500 W Microwave Output 900 W Convection 1500 W IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances basic safety precautions should be followed, including the following: WARNING - To reduce the risk of burns, electric shock, fire, injury to persons or exposure to excessive microwave energy: 1. Read all instructions before using the appliance. 2. Read and follow the specific: "PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY" found on page 2. 3. This appliance must be grounded. Connect only to properly grounded outlet. See "GROUNDING INSTRUCTIONS" found on page 5. 4. Install or locate this appliance only in accordance with the provided installation instructions. 5. Some products such as whole eggs and sealed containers - for example, closed glassjars - are able to explode and should not be heated in this oven. 6. Use this appliance only for its intended use as described in the manual. Do not usecorrosive chemicals or vapors in this appliance. This type of oven is specifically designed to heat, cook or dry food. It is not designed for industrial or laboratory use. 7. HOT CONTENTS CAN CAUSE SEVERE BURNS. DO NOT ALLOW CHILDREN TO USE THE MICROWAVE. Use caution when removing hot items. 8. Do not operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped. 9. This appliance should be serviced only by qualified service personnel. Contact nearest authorized service facility for examination, repair, or adjustment. 10. Do not cover or block any openings on the appliance. 3 11. Do not store this appliance outdoors. Do not use this product near water - for example, near a kitchen sink, in a wet basement, near a swimming pool, or similar location. 12. Do not immerse cord or plug in water.13. Keep cord away from heated surface. 14. Do not let cord hang over edge of table or counter. 15. When cleaning surfaces of door and oven that comes together on closing the door,use only mild, nonabrasive soaps, or detergent applied with a sponge or soft cloth. 16. To reduce the risk of fire in the oven cavity: 1). Do not overcook food. Carefully attend appliance when paper, plastic, or other combustible materials are placed inside the oven to facilitate cooking. 2). Remove wire twist-ties from paper or plastic bag before placing bag in oven. 3). If material inside of the oven ignite, keep oven door closed, turn oven off, and disconnect the power cord, or shut off power at the fuse or circuit breaker panel. 4). Do not use the cavity for storage purposes. Do not leave paper products, cooking utensils, or food in the cavity when not in use. 17. Liquids, such as water, coffee, or tea are able to be overheated beyond the boiling point without appearing to be boiling. Visible bubbling or boiling when the container is removed from the microwave oven is not always present. THIS COULD RESULT IN VERY HOT LIQUID SUDDENLY BOILING OVER WHEN THE CONTAINER IS DISTURBED OR A SPOON OR OTHER UTENSIL IS INSERTED INTO THE LIQUID. To reduce the risk of injury to persons: 1) Do not overheat the liquid. 2) Stir the liquid both before and halfway through heating it. 3) Do not use straight-sided containers with narrow necks. 4) After heating, allow the container to stand in the microwave oven for a short time before removing the container. 5) Use extreme care when inserting a spoon or other utensil into the container. 18. Do not operate any heating or cooking appliance beneath the appliance. (Exception: A microwave oven investigated for use above another heating appliance.) 19. Do not mount unit over or near any portion of heating or cooking appliance. (Exception: A microwave oven investigated for use above another heating appliance.) 20. Do not mount over sink. 21. Do not store anything directly on top of the appliance surface when the appliance is in operation. 22. Oversized food or oversized metal utensils should not be inserted in a microwave/ toaster oven as they may create a fire or risk of electric shock. 23. Do not clean with metal scouring pads. Pieces can burn off the pad and touch electrical parts involving a risk of electric shock. 24. Do not use paper products when appliance is operated in the toaster mode. 25. Do not store any materials, other than manufacturer's recommended accessories, in this oven when not in use. 4 26. Do not cover racks or any other part of the oven with metal foil. This will cause over heating of the oven. SAVE THESE INSTRUCTIONS HOUSEHOLD USE ONLY (NOT FOR COMMERCIAL USE) GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. WARN…

Text truncated - open the document above for the full version.

ArentFox Schiff LLP 1717 K Street, NW Washington, DC 20006 202.857.6000MAIN 202.857.6395FAX afslaw.com Jeffrey E. Rummel Partner and Communications & Technology Practice Leader 202.715.8479DIRECT [email protected] U.S. Agent Designation for Serviceof Process (Applicant and U.S. Agent are Separate Parties) TO: Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name:ArentFox Schiff LLP Contact Name:Jeffrey Rummel Street Address:1717 K St., nw City/Province/Zip:Washington, D.C. 20006 Telephone No: (202)715-8479 Email:[email protected] FRN #: 0021243860 This letter is to confirm that we(“ArentFox Schiff LLP”) have accepted the responsibility to act asthe Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date:4/4/2023 Signed by (Printed Name/Title):Jeffrey Rummel The Applicantacknowledges that they must maintain an agentfor no less than one year after terminatingall marketing and importation ORthe conclusion of any Commission- related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent informationabove changes. 022423-17 Rev 6 Applicant Company name: Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd. Grantee Code: VG8 FRN: 0019079995 Contact Name: Jilin Ye Street Address : No.6, Yong An Road, Beijiao, Shunde City/Province/Zip: Foshan, Guangdong, China Telephone No: +86-0757-26339595 Email: [email protected] om Applicant Signature: Date:2023/3/28 Signed by (Printed Name/Title): Jilin Ye

GUANGDONG MIDEA KITCHEN APPLIANCES MANUFACTURING CO., LTD. Covered Equipment Certification Attestation Letter 11/10/2025 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: VG8TC934DYYM Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “ covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipm ent for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List , the applicant should include an explanation on why the equipment is not “covered” equipment. Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti- virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Signed: Printed name: Ye Jilin Title: Engineer Company Name: Guangdong Midea Kitchen Appliances Manufac turing Co., Ltd. Date: 11/10/2025

GUANGDONG MIDEA KITCHEN APPLIANCES MANUFACTURING CO., LTD. Request for Confidentiality Date: November 10, 2025 Subject: Confidentiality Request for: FCC ID: VG8TC934DYYM Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests t hat a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit ☐Short Term☒Permanent Block Diagrams ☐Short Term External Photos ☐Short Term☐Permanent Internal Photos ☐Short Term☒Permanent Operation Description/Theory of Operation ☐Short Term☐Permanent Parts List & Placement/BOM ☐Short Term☐Permanent Tune-Up Procedure ☐Short Term☒Permanent Schematics ☐Short Term Test Setup Photos ☐Short Term☐Permanent User’s Manual ___Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd_____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality : The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of (specify number of days not to exceed 180) days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify Nemko in the event information regarding the product or the product is made available to the public before the requested period has expired. Nemko will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By: Ye Jilin (Signature/Title) (Print name)

GUANGDONG MIDEA KITCHEN APPLIANCES MANUFACTURING CO., LTD. ___________________________________________________________________________________________________ Model Difference Declaration Date: November 10, 2025 Subject: Model difference declaration for FCC ID: VG8TC934DYYM We, Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd, apply FCC certificate for Our product Microwave Oven. TC934D##, TC934D***, TC934D##-SHNA, TC934D***-SHNA, TC934D##-SH0D, TC934D***- SH0D, MMD30AF4BST model designations as follow: T: Touch type keypad; C: Microwave oven + Convection function; 934: “9” indicates the microwave output power is 900W, “34” indicates cavity capacity is 34 liters; D: indicates the design No.; ##/***: “#” “*” may be 0-9, A-Z or blank, indicates different appearance; S: Stainless Cavity; H: Humidity; N: 30 inches width; A: indicates the voltage of the United States, 0: 24 inches, D: UL&CUL microwave oven. All the above-mentioned models are identical to the model of TC934D3MF-SHNA except for model name, trade mark and appearance. Model of TC934D3MF-SHNA was selected for final testing. Sincerely, By: _ Ye Jilin _ (Signature) (Print name)

Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25111128-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 37 of 48 8. Photos of the EUT Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25111128-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 38 of 48 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25111128-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 39 of 48

FCC Label: FCC Label Location:

Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25111128-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 40 of 48 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25111128-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 41 of 48 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25111128-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 42 of 48 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25111128-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 43 of 48 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25111128-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 44 of 48 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25111128-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 45 of 48 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25111128-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 46 of 48 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25111128-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 47 of 48 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25111128-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 48 of 48 -----------End Report----------

Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25111128-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 1 of 48 FCC PART18 TEST REPORT Applicant:Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd Address of Applicant : No.6, Yong An Road, Beijiao, Shunde, Foshan, Guangdong, China Manufacturer:Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd Address of Manufacturer : No.6, Yong An Road, Beijiao, Shunde, Foshan, Guangdong, China Equipment under Test :Microwave Oven Trade Name:Midea Model No.: TC934D##, TC934D***, TC934D##-SHNA, TC934D***-SHNA, TC934D##-SH0D, TC934D***-SH0D, MMD30AF4BST Model Tested:TC934D3MF-SHNA FCC ID:VG8TC934DYYM Test Standard(s): FCC Rules and Regulations Part 18 FCC Rules and Regulations Part 15 Subpart B FCC/OST MP-5:1986 Report No.:DDT-RE25111128-1E01 Issue Date:2025/12/04 Issued By: Guangdong Dongdian Testing Service Co., Ltd. Unit 2, Building 1, No. 17, Zongbu 2nd Road, Songshan Lake Park, Dongguan, Guangdong, China, 523808 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25111128-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 2 of 48 Table of Contents 1.Summary of Test Results .............................................................................................6 2.General Test Information..............................................................................................7 2.1.Description of EUT .......................................................................................................7 2.2.Accessories of EUT......................................................................................................8 2.3.Assistant equipment used for test ................................................................................8 2.4.Block diagram EUT configuration for test.....................................................................8 2.5.Decision of final test mode ...........................................................................................8 2.6.Deviations of test standard...........................................................................................8 2.7.Test environment conditions ........................................................................................9 2.8.Test laboratory .............................................................................................................9 2.9.Measurement uncertainty...........................................................................................10 3.AC Power Port Conducted Emission..........................................................................11 3.1.Test equipment...........................................................................................................11 3.2.Block diagram of test setup ........................................................................................11 3.3.Limits ..........................................................................................................................12 3.4.Test procedure ...........................................................................................................13 3.5.Test result...................................................................................................................13 3.6.Test data ....................................................................................................................14 3.7.Test photo ..................................................................................................................18 4.Radiated Emissions Test............................................................................................19 4.1.Test equipment...........................................................................................................19 4.2.Block diagram of test setup ........................................................................................20 4.3.Limits ..........................................................................................................................24 4.4.Test procedure ...........................................................................................................25 4.5.Test result...................................................................................................................25 4.6.Test data ....................................................................................................................26 4.7.Test photo ..................................................................................................................32 5.Operating frequency Test...........................................................................................33 5.1.Test equipment...........................................................................................................33 5.2.Limits ..........................................................................................................................33 5.3.Test procedure ...........................................................................................................34 5.4.Test result...................................................................................................................34 6.Radiation Hazard Test................................................................................................35 6.1.Test equipment...........................................................................................................35 6.2.Limits ..........................................................................................................................35 6.3.Test procedure ...........................................................................................................35 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25111128-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 3 of 48 6.4.Test result................................................................................................................…

Text truncated - open the document above for the full version.

Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25111128-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 1 of 48 FCC PART18 TEST REPORT Applicant:Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd Address of Applicant : No.6, Yong An Road, Beijiao, Shunde, Foshan, Guangdong, China Manufacturer:Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd Address of Manufacturer : No.6, Yong An Road, Beijiao, Shunde, Foshan, Guangdong, China Equipment under Test :Microwave Oven Trade Name:Midea Model No.: TC934D##, TC934D***, TC934D##-SHNA, TC934D***-SHNA, TC934D##-SH0D, TC934D***-SH0D, MMD30AF4BST Model Tested:TC934D3MF-SHNA FCC ID:VG8TC934DYYM Test Standard(s): FCC Rules and Regulations Part 18 FCC Rules and Regulations Part 15 Subpart B FCC/OST MP-5:1986 Report No.:DDT-RE25111128-1E01 Issue Date:2025/12/04 Issued By: Guangdong Dongdian Testing Service Co., Ltd. Unit 2, Building 1, No. 17, Zongbu 2nd Road, Songshan Lake Park, Dongguan, Guangdong, China, 523808 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25111128-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 2 of 48 Table of Contents 1.Summary of Test Results .............................................................................................6 2.General Test Information..............................................................................................7 2.1.Description of EUT .......................................................................................................7 2.2.Accessories of EUT......................................................................................................8 2.3.Assistant equipment used for test ................................................................................8 2.4.Block diagram EUT configuration for test.....................................................................8 2.5.Decision of final test mode ...........................................................................................8 2.6.Deviations of test standard...........................................................................................8 2.7.Test environment conditions ........................................................................................9 2.8.Test laboratory .............................................................................................................9 2.9.Measurement uncertainty...........................................................................................10 3.AC Power Port Conducted Emission..........................................................................11 3.1.Test equipment...........................................................................................................11 3.2.Block diagram of test setup ........................................................................................11 3.3.Limits ..........................................................................................................................12 3.4.Test procedure ...........................................................................................................13 3.5.Test result...................................................................................................................13 3.6.Test data ....................................................................................................................14 3.7.Test photo ..................................................................................................................18 4.Radiated Emissions Test............................................................................................19 4.1.Test equipment...........................................................................................................19 4.2.Block diagram of test setup ........................................................................................20 4.3.Limits ..........................................................................................................................24 4.4.Test procedure ...........................................................................................................25 4.5.Test result...................................................................................................................25 4.6.Test data ....................................................................................................................26 4.7.Test photo ..................................................................................................................32 5.Operating frequency Test...........................................................................................33 5.1.Test equipment...........................................................................................................33 5.2.Limits ..........................................................................................................................33 5.3.Test procedure ...........................................................................................................34 5.4.Test result...................................................................................................................34 6.Radiation Hazard Test................................................................................................35 6.1.Test equipment...........................................................................................................35 6.2.Limits ..........................................................................................................................35 6.3.Test procedure ...........................................................................................................35 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25111128-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 3 of 48 6.4.Test result................................................................................................................…

Text truncated - open the document above for the full version.

Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25111128-1E01 Test photo / / / /