VG8TJ018GXXMicrowave Oven

Read i ns tr uc ti ons before us e Installation and User Manual CAUTION: Read the instructions before using the appliance. – Original, GBR TJ018GS7-SV0E0A TJ018G5ST-SV0E0A TJ018G5ST-SV0B0A Commercial High Speed Oven Translation of the original instructions WARNING: To avoid scalding, do not use loaded containers with liquids or cooking goods which becomes fluid by heating in higher levels than those which can be easily observed. In the event of an accident or breakdown, the following operating methods should be followed to prevent unsafe actions: Firstly, remain calm and avoid panicking. Secondly, immediately stop the operation or activity that caused the problem. Thirdly, assess the situation and if possible, take appropriate measures such as turning off the equipment. When handling spreading hot food stuff, it's important to use proper personal protection equipment. This may include heat-resistant gloves to protect your hands from burns, and aprons to prevent spills from staining your clothing. Also, safety goggles can safeguard your eyes from splashes. WARNING: Possible slippery floor adjacent to the appliance! 7KH$ZHLJKWHGHPLVVLRQVRXQGSUHVVXUHOHYHOLV”G% $ WARNING: Appliances must be disconnected from their power supply during cleaning or maintenance and when replacing parts. Any repairs shall be carried out by competent persons. WARNING:$VXSSRUWLVQHHGHGVRWKDWWKHZRUNLQJKHLJKWRIWKHDSSOLDQFHLVEHWZHHQDQG PP7KLVDSSOLDQFHLVQRWLQWHQGHGIRUXVHE\SHUVRQVZLWKUHGXFHGSK\VLFDOVHQVRU\RUPHQWDO capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. This appliance incorporates an earth connection for functional purposes only. The removal of the plug has to be such that an operator can check from any of the points to which he has access that the plug remains removed. IMPORTANT Customer documentation ƒ The c us to mer documen tat ion i s pa rt o f th e microwave combi na tion o ven . ƒ Keep the cus tomer do cumen tation man ua ls han dy at al l times so that you can loo k up any r equi red inf ormati on . ƒ Keep t he cus tomer documentation man uals f or the entire life of th e appl ian ce. ƒ Caref ul ly r ead t he Instal lation a nd User Manual be fore using, h andlin g, and working o n t his appl i- an ce. ƒ If you t rans fer the microwave combi na tion oven to a new o wner, mak e sure to gi ve t he n ew owner the c us tomer documen tat ion man ua ls as well. 3 Contents 1 General information 10 1.1 EC Declaration of Conformity 1.2 1.3 Important Information 1.4 Identifying your 1.5 1.6 About this Installation and User Manual 2 Design and function For your safety 2.1 2.2 Intended use of your Commercial High Speed Oven 2.3 2.4 Summary of hazards 2.5 Hazards and safety precautions when moving the appliance 2.6 Hazards and safety precautions when setting up the appliance 2.7 Hazards and safety precautions during installing 2.8 Hazards and safety precautions when preparing appliance for use 2.9 Hazards and safety precautions during operation 2.10 Hazards and safety precautions during cleaning Hazards and safety precautions when taking the appliance out of service Safety device 2.11 Requirements to be met by personnel and working positions 2.12 Personal protective equipment s Moving the appliance Working safely with the appliance Moving the appliance to the installation location Setting up the appliance 4.1 Safe working when setting up the appliance 4.2 Requirements for the installation location 4.3 4.4 Un Sealing instructions packing th e appliance Installation 5.1 Safe working during electrical installation 5.2 Planning the electrical installation .35 Electrical installation .45 Installation supplement requirements Preparing the appliance for use 6.1 Safe working when preparing the appliance for use 16 3 31 33 3.1 3.2 4 5 6 42 Operation instruction Start-up Preheating 7 7.1 Automatic Recipe Operation 7.2 7.3 Settings Function7.4 Shutdown & clean7.5 Chef Customization 8Cleaning instruction Daily cleaning tasks 8.1 Items required for cleaning8.3 Cleaning chemicals8.2 8.5Cleaning instructions 8.4Safe working when cleaning 46 40 37 Commercial High Speed Oven Design and function of the Commercial High Speed Oven 4 Contents 9Attached accessories instruction Attached accessories 9.1 HSO accessories guide 9.2 10Warranty information and contacting customer service 53 51 11Taking the appliance out of oper ation and disposal Safe working when taking the appliance out of operation11.1 Taking the appliance out of operation and disposal11.2 54 12Troubleshooting56 5 ADDENDUM If the apparatus is not maintained in a good state of cleanliness, its surface could be degraded and affect the lifespan of the apparatus and l ead to a dangerous situation. PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY  D 'RQRWDWWHPSWWRRSHUDWHWKLVRYHQZLWKWKHGRRURSHQVLQFHWKLVFDQUHVXOWLQ harmful exposure to microwave energy. It is important not to break or tamper with the safety interlocks.  E 'RQRWSODFHDQ\REMHFWEHWZHHQWKHRYHQIURQWIDFHDQGWKHGRRURUDOORZVRLO or cleaner residue to accumulate on sealing surfaces.  F :$51,1*,IWKHGRRURUGRRUVHDOVDUHGDPDJHGWKHRYHQPXVWQRWEHRSHUDWHG until it has been repaired by a competent person. 6 IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire, electric shock, injury to persons or exposure to excessive microwave oven energy when using your appliance, follow basic precautions, including the following: 5HDGDQGIROORZWKHVSHFLILF35(&$87,21672$92,'3266,%/((;32685( 72(;&(66,9(0,&52:$9((1(5*< 2. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. 3. Keep the appliance and its cord out of reach of children less than 8 years. 4. If the supply cord is damaged, i…

Text truncated - open the document above for the full version.

ArentFox Schiff LLP 1717 K Street, NW Washington, DC 20006 202.857.6000MAIN 202.857.6395FAX afslaw.com Jeffrey E. Rummel Partner and Communications & Technology Practice Leader 202.715.8479DIRECT [email protected] U.S. Agent Designation for Serviceof Process (Applicant and U.S. Agent are Separate Parties) TO: Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name:ArentFox Schiff LLP Contact Name:Jeffrey Rummel Street Address:1717 K St., nw City/Province/Zip:Washington, D.C. 20006 Telephone No: (202)715-8479 Email:[email protected] FRN #: 0021243860 This letter is to confirm that we(“ArentFox Schiff LLP”) have accepted the responsibility to act asthe Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date:4/4/2023 Signed by (Printed Name/Title):Jeffrey Rummel The Applicantacknowledges that they must maintain an agentfor no less than one year after terminatingall marketing and importation ORthe conclusion of any Commission- related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent informationabove changes. 022423-17 Rev 6 Applicant Company name: Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd. Grantee Code: VG8 FRN: 0019079995 Contact Name: Jilin Ye Street Address : No.6, Yong An Road, Beijiao, Shunde City/Province/Zip: Foshan, Guangdong, China Telephone No: +86-0757-26339595 Email: [email protected] om Applicant Signature: Date:2023/3/28 Signed by (Printed Name/Title): Jilin Ye

GUANGDONG MIDEA KITCHEN APPLIANCES MANUFACTURING CO., LTD. Covered Equipment Certification Attestation Letter 11/24/2025 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: VG8TJ018GXX Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd. (“the applicant”) certifies that the equipment for whic h authorization is sought is not “ covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipmen t for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List , the applicant should include an explanation on why the equipment is not “covered” equipment. Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti- virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Signed: Printed name: Ye Jilin Title: Engineer Company Name: Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd. Date: 11/24/2025

GUANGDONG MIDEA KITCHEN APPLIANCES MANUFACTURING CO., LTD. Request for Confidentiality Date: November 24, 2025 Subject: Confidentiality Request for: FCC ID: VG8TJ018GXX Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests t hat a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit ☐Short Term☒Permanent Block Diagrams ☐Short Term External Photos ☐Short Term☐Permanent Internal Photos ☐Short Term☒Permanent Operation Description/Theory of Operation ☐Short Term☐Permanent Parts List & Placement/BOM ☐Short Term☐Permanent Tune-Up Procedure ☐Short Term☒Permanent Schematics ☐Short Term Test Setup Photos ☐Short Term☐Permanent User’s Manual ___Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd_____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of (specify number of days not to exceed 180) days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify Nemko in the event information regarding the product or the product is made available to the public before the requested period has expired. Nemko will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By: Ye Jilin (Signature/Title) (Print name)

GUANGDONG MIDEA KITCHEN APPLIANCES MANUFACTURING CO., LTD. ___________________________________________________________________________________________________ Model Difference Declaration Date: November 24, 2025 Subject: Model difference declaration for FCC ID: VG8TJ018GXX We, Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd, apply FCC certificate for Our product Microwave Oven. TJ018G##-SV0N0A, TJ018G***-SV0N0A model designations as follow: T: Touch type keypad; J: Indicates upper and lower hot air convection function; 0: Indicates power code; 18: Indicates cavity capacity is 18 liters; G: Indicates the design No.; ## or ***: “#” “*” = 0-9, A -Z or blank, indicates different appearance; SV0N0A: "S" indicates stainless steel Cavity; "V0N0" indicates the design No., "A" indicates the voltage of the United States. All the above-mentioned models are identical to the model of TJ018G5ST-SV0N0A except for model name, trade mark and appearance. Model of TJ018G5ST-SV0N0A was selected for final testing. Sincerely, By: _ Ye Jilin _ (Signature) (Print name)

Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25112505-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 38 of 49 8. Photos of the EUT Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25112505-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 39 of 49 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25112505-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 40 of 49

FCC Label: FCC Label Location:

Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25112505-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 41 of 49 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25112505-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 42 of 49 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25112505-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 43 of 49 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25112505-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 44 of 49 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25112505-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 45 of 49 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25112505-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 46 of 49 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25112505-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 47 of 49 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25112505-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 48 of 49 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25112505-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 49 of 49 -----------End Report----------

Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25112505-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 1 of 49 FCC PART18 TEST REPORT Applicant:Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd Address of Applicant : No.6, Yong An Road, Beijiao, Shunde, Foshan, Guangdong, China Manufacturer:Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd Address of Manufacturer : No.6, Yong An Road, Beijiao, Shunde, Foshan, Guangdong, China Equipment under Test :Microwave Oven Trade Name:Midea Model No.:TJ018G##-SV0N0A, TJ018G***-SV0N0A Model Tested:TJ018G5ST-SV0N0A FCC ID:VG8TJ018GXX Test Standard(s): FCC Rules and Regulations Part 18 FCC Rules and Regulations Part 15 Subpart B FCC/OST MP-5:1986 Report No.:DDT-RE25112505-1E01 Issue Date:2025/12/12 Issued By: Guangdong Dongdian Testing Service Co., Ltd. Unit 2, Building 1, No. 17, Zongbu 2nd Road, Songshan Lake Park, Dongguan, Guangdong, China, 523808 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25112505-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 2 of 49 Table of Contents 1.Summary of Test Results .............................................................................................6 2.General Test Information..............................................................................................7 2.1.Description of EUT .......................................................................................................7 2.2.Accessories of EUT......................................................................................................8 2.3.Assistant equipment used for test ................................................................................8 2.4.Block diagram EUT configuration for test.....................................................................8 2.5.Decision of final test mode ...........................................................................................8 2.6.Deviations of test standard...........................................................................................9 2.7.Test environment conditions ........................................................................................9 2.8.Test laboratory .............................................................................................................9 2.9.Measurement uncertainty...........................................................................................10 3.AC Power Port Conducted Emission..........................................................................11 3.1.Test equipment...........................................................................................................11 3.2.Block diagram of test setup ........................................................................................11 3.3.Limits ..........................................................................................................................12 3.4.Test procedure ...........................................................................................................13 3.5.Test result...................................................................................................................13 3.6.Test data ....................................................................................................................14 3.7.Test photo ..................................................................................................................18 4.Radiated Emissions Test............................................................................................19 4.1.Test equipment...........................................................................................................19 4.2.Block diagram of test setup ........................................................................................20 4.3.Limits ..........................................................................................................................24 4.4.Test procedure ...........................................................................................................25 4.5.Test result...................................................................................................................25 4.6.Test data ....................................................................................................................26 4.7.Test photo ..................................................................................................................32 5.Operating frequency Test...........................................................................................33 5.1.Test equipment...........................................................................................................33 5.2.Limits ..........................................................................................................................33 5.3.Test procedure ...........................................................................................................34 5.4.Test result...................................................................................................................34 6.Radiation Hazard Test................................................................................................35 6.1.Test equipment...........................................................................................................35 6.2.Limits ..........................................................................................................................35 6.3.Test procedure ...........................................................................................................35 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25112505-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 3 of 49 6.4.Test result...................................................................................................................35 6.5.Test photo ........................................…

Text truncated - open the document above for the full version.

Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25112505-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 1 of 49 FCC PART18 TEST REPORT Applicant:Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd Address of Applicant : No.6, Yong An Road, Beijiao, Shunde, Foshan, Guangdong, China Manufacturer:Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd Address of Manufacturer : No.6, Yong An Road, Beijiao, Shunde, Foshan, Guangdong, China Equipment under Test :Microwave Oven Trade Name:Midea Model No.:TJ018G##-SV0N0A, TJ018G***-SV0N0A Model Tested:TJ018G5ST-SV0N0A FCC ID:VG8TJ018GXX Test Standard(s): FCC Rules and Regulations Part 18 FCC Rules and Regulations Part 15 Subpart B FCC/OST MP-5:1986 Report No.:DDT-RE25112505-1E01 Issue Date:2025/12/12 Issued By: Guangdong Dongdian Testing Service Co., Ltd. Unit 2, Building 1, No. 17, Zongbu 2nd Road, Songshan Lake Park, Dongguan, Guangdong, China, 523808 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25112505-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 2 of 49 Table of Contents 1.Summary of Test Results .............................................................................................6 2.General Test Information..............................................................................................7 2.1.Description of EUT .......................................................................................................7 2.2.Accessories of EUT......................................................................................................8 2.3.Assistant equipment used for test ................................................................................8 2.4.Block diagram EUT configuration for test.....................................................................8 2.5.Decision of final test mode ...........................................................................................8 2.6.Deviations of test standard...........................................................................................9 2.7.Test environment conditions ........................................................................................9 2.8.Test laboratory .............................................................................................................9 2.9.Measurement uncertainty...........................................................................................10 3.AC Power Port Conducted Emission..........................................................................11 3.1.Test equipment...........................................................................................................11 3.2.Block diagram of test setup ........................................................................................11 3.3.Limits ..........................................................................................................................12 3.4.Test procedure ...........................................................................................................13 3.5.Test result...................................................................................................................13 3.6.Test data ....................................................................................................................14 3.7.Test photo ..................................................................................................................18 4.Radiated Emissions Test............................................................................................19 4.1.Test equipment...........................................................................................................19 4.2.Block diagram of test setup ........................................................................................20 4.3.Limits ..........................................................................................................................24 4.4.Test procedure ...........................................................................................................25 4.5.Test result...................................................................................................................25 4.6.Test data ....................................................................................................................26 4.7.Test photo ..................................................................................................................32 5.Operating frequency Test...........................................................................................33 5.1.Test equipment...........................................................................................................33 5.2.Limits ..........................................................................................................................33 5.3.Test procedure ...........................................................................................................34 5.4.Test result...................................................................................................................34 6.Radiation Hazard Test................................................................................................35 6.1.Test equipment...........................................................................................................35 6.2.Limits ..........................................................................................................................35 6.3.Test procedure ...........................................................................................................35 Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25112505-1E01 TRF No.: RT-4-E-01-001 EMC test report Ver. 1.0 Page 3 of 49 6.4.Test result...................................................................................................................35 6.5.Test photo ........................................…

Text truncated - open the document above for the full version.

Guangdong Dongdian Testing Service Co., Ltd. Report No.: DDT-RE25112505-1E01 Test photo / / / /