VIXALQ100LED Desk Lamp with Wireless Charging

LED DESK LAMP WITH WIRELESS CHARGING User’s Guide Getting Started Step 1: Plug In 1. Plug the included power adapter into the power jack on the back of the lamp. 2. Plug the other end of this cable into a working power outlet. BATTERY BACKUP Your clock has a pre-installed battery backup that will keep the time in case power is interrupted (like by a power outage, for example). To start using the battery backup, pull the activation tab above the battery door on the back of the lamp. The protective film covering the battery will come of with the tab and the battery will be activated. If you notice that battery backup is no longer working, simply replace the CR2032 coin-cell battery in the battery compartment on the back of the lamp. Use a coin to turn the battery door and unlock it. Then remove the door and access the CR2032 battery. Lamp, back panel Step 2: Unfold and turn on the lamp This lamp has 2 articulating arms for complete flexibility in angle and placement. Unfold the lamp completely and experiment with both arms until you find the position and angle you prefer. To turn on the lamp: Press on the base of the lamp. Step 2: Set the Time and Date When you first plug it in, the lamp’s clock display shows 12:00. 1. Press on the back of the lamp. 2. Press and on back of the lamp to adjust the hour. Press to set the hour and move to the minutes. 3. Press and to adjust the minutes. Press to set the minutes and move to the year. Lamp, back panel 4. Press and to adjust the year. Press to set the year and move to the date. 5. Press and to adjust the date. Press to finish setting the time and date. Note: By default, the clock uses the 12-hour format (for example, 5:00 pm instead of 17:00). To switch between 12- and 24-hour format, press . Everyday Use Setting the Alarm 1. Press on the back of the lamp to display the alarm time. 2. Press on the back of the lamp to adjust the alarm time. 3. Press and on back of the lamp to adjust the alarm hour. Press to set the hour and move to the minutes. 4. Press and to adjust the alarm minutes. Press to set the minutes and move to the snooze time. 5. Press and to adjust the amount of alarm delay for snooze. Lamp, back panel Press to set the snooze time and move to the alarm sound/ music. 6. Press and to select the sound/music you want to use for the alarm. Press to select it and finish setting the alarm. To turn the alarm on/off: Press on the back of the lamp to display the alarm time. Then press and on back of the lamp to turn on the alarm and/or snooze function. • One press turns on the alarm. • Two presses turns on the alarm and snooze function (alarm sounds for one minute, then snoozes). • Three presses turns off alarm and snooze. Note: The alarm sounds for 1 minute when activated. Setting the Display Brightness The clock display defaults to its highest brightness setting when you first plug the lamp in. To adjust display brightness: Press on the back of the lamp. Each press goes to the next setting—minimum, medium, and maximum. Using the Lamp The lamp offers 5 brightness levels and 3 color temperature settings. To turn on the lamp: Press on the base of the lamp. To adjust the lamp’s brightness: Press and on the base of the lamp. To adjust the lamp’s color temperature: Press on the base of the lamp. Each press goes to the next temperature setting (cool, warm, and neutral). Charging your Device Charging indicator IMPORTANT: Before you try to charge your device, make sure it is compatible with wireless charging. If your device has a metal case, remove it before you put the device on the charger. 1. Place your wireless charging-compatible device directly onto the charging pad on base of the lamp. Refer to the placement illustration here as a guide. Lamp, base The charging indicator on the base of the lamp turns red while your device is charging. It turns green when your device has finished charging. Check your device’s screen to see the progress of charging. You can remove your device at any time during charging. Important: If the charging indicator light starts blinking, there’s something interfering with the charging. Make sure there are no objects between your phone and the charging pad. You might need to remove your phone’s case to charge wirelessly. 2. When your device is completely charged, remove it from the charging pad. Note: The lamp must be plugged in to provide wireless charging. Tour of the Wireless Charging Alarm Clock Display Time/alarm display shows the current time. Press on the lamp base to display the alarm time. MONTH DATE DAY display shows the current month, day, and day of the week. Temperature display shows the current indoor temperature. Press on the back of the lamp to switch between Celsius and Fahrenheit. Base Wireless charging pad and indicator lets you charge compatible devices wirelessly when the lamp is using AC power. The indicator turns solid red while your device is charging and turns green when your device is charged. The charging indicator blinks when there is a problem charging. turns the lamp on and off. cycles through the lamp’s color temperature settings (cool, warm, and neutral). and cycles through the lamp’s 5 brightness settings. Wireless charging pad Charging indicator Back cycles through the 3 display brightness settings. switches between time and alarm time display. enters time/date set or alarm set modes. and increases or decreases the flashing value when setting time, date, or alarm. Activates the alarm and/or snooze when the alarm time is displayed. switches between 12- and 24-hour time when the time is displayed. switches between Celsius and Fahrenheit temperature display when the time is displayed. Backup battery compartment houses the backup battery so the display keeps time even if there’s a power outage. Power jack (not shown) plugs into the provided charging adapter to power the lamp. Backup battery compartment ALQ100 IB 00www.Acoustic-Research.com MONTHDATEDAY

IMPORTANT SAFETY INSTRUCTIONS PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be observed during handling and use. • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments/accessories specified by the manufacturer. • Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. • Unplug this apparatus during lightning storms or when unused for long periods of time. • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. ADDITIONAL SAFETY INFORMATION • The AC/DC adapter supplied with this product is intended to be correctly oriented in a vertical or floor mount position. • Do not use unauthorized chargers or power adapters. Use only chargers or power adapters that came with your product or that is listed in the user’s guide. • Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. • Always leave sufficient space around the product for ventilation. Do not place product in or on a bed, rug, in a bookcase or cabinet that may prevent air flow through vent openings. • Do not place lighted candles, cigarettes, cigars, etc. on the product. • Care should be taken so that objects do not fall into the product. • Do not attempt to disassemble the cabinet. This product does not contain customer serviceable components. • The marking information is located at the bottom of apparatus. • To be completely disconnect the power input, the AC/DC adaptor of apparatus shall be disconnected from the mains. • AC/DC adaptor is a disconnect device. The AC/DC adaptor should not be obstructed OR should be easily accessed during intended use. • The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc. • No naked flame sources such as lighted candled should be placed on the apparatus. • Attention should be drawn to the environmental aspects of battery disposal. • The use of apparatus in moderate climates. Important battery precautions WARNING Chemical Burn Hazard. Keep batteries away from children. This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. The cells must be disposed of properly, including keeping them away from children. Even used cells may cause injury. WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like. Ecology Help protect the environment - we recommend that you dispose of used batteries by putting them into specially designed receptacles. ] Portable Cart Warning English ALQ100 Safety 00 FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a WPC device, pursuant to Part 18 of the FCC Rules. Note: This equipment has been tested and found to comply with the limits for a Class B digital device and a wireless power charger, pursuant to part 15 and part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the d…

Text truncated - open the document above for the full version.

Date: Aug 18, 2020 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: VIXALQ100 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matter s. Any an d all acts carried out by the agent on our behalf shall have the same effect as acts o f our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Voxx Accessories Corp. This authorization is valid until further written notice from the applicant. Print Name: Paul Tinaphong Title: VP engineering Signature: On behalf of Company: Voxx Accessories Corp. Telephone: (317)218-7301 E-mail: [email protected]

To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Regarding: Confidentiality Request regarding application for FCC ID: VIXALQ100 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Print Name: Paul Tinaphong Title: VP engineering Signature: On behalf of Company: Voxx Accessories Corp. Telephone: (317)218-7301 E-mail: [email protected]

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Voxx Accessories Corp. Address 3502 Woodview Trace, Suite 220, Indianapolis, Indiana, IN 46268, United States Grantee Code VIX FCC ID VIXALQ100 Authorized Contact Name Paul Tinaphong Contact Email [email protected] Contact Phone (317)218-7301 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: Aug 18, 2020 Print Name: Paul Tinaphong Title: Senior V.P. *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Cover Letter-Wireless Charger Approval Date: 2020-08-18 Gentlemen: There’s a Wireless Charging Speaker that would like to have your authorization as an Inductive wireless power transfer applications approval. The specific product as below, Wireless Charging Speaker, with its designed features and specified description, meets special requirements for KDB 680106 D01 section 5.2 requirements. Company: Voxx Accessories Corp. Product Name: LED Desk Lamp with Wireless Charging Model Number: ALQ100 FCC ID: VIXALQ100 KDB 680106 D01 Section 5.2 Requirements Product Technical Specification Result a)Power transfer frequency is less that 1 MHz 110.42 - 164.42 kHz Complied b)Output power from each primary coil is less than or equal to 15 watts. 5 watts c)The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils Complied d)Client device is placed directly in contact with the transmitter. Complied e)Mobile exposure conditions onlyFor inductive applications where the primary does not physically attach to the client, and it is intended for desktop use, the desktop guidance in KDB 680106 D01 may be applied Complied f)The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Please refer to RF exposure report Complied Sinc erely, Print Name: Paul Tinaphong Title: VP engineering Signature: On behalf of Company: Voxx Accessories Corp. Telephone: (317)218-7301 E-mail: [email protected] Complied

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 6 External Photos for SZEM2008007828CR FCC ID: VIXALQ100 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 6 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 6

LED Desk Lamp with Wireless Charging Model:ALQ100 Input:12.0V Wireless Charging Output:5V 1A FCC ID:VIXALQ100 IC:21578-ALQ100 Made in China This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-005(B)/NMB-005(B). 1.5A

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 8 Internal Photos for SZEM2008007828CR FCC ID: VIXALQ100 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 8 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 7 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 8 of 8 ANTENNA

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800782803 Page: 1 of 8 Keny Xu EMC Laboratory Manager Human Exposure Report Application No.: SZEM2008007828CR Applicant: Voxx Accessories Corp. Address of Applicant: 3502 Woodview Trace, Suite 220, Indianapolis, Indiana 46268 United States Manufacturer: Voxx Accessories Corp. Address of Manufacturer: 3502 Woodview Trace, Suite 220, Indianapolis, Indiana 46268 United States Factory: Shenzhen Feihe Electronics Co., Ltd Address of Factory: 2/F, 3/F and West Side of 4/F, Bldg. 2, Hongfa Innovative Park, Lezhujiao, Jiuwei, Hangcheng Avenue, Bao'an District, Shenzhen, China Equipment Under Test (EUT): EUT Name: LED Desk Lamp with Wireless Charging Model No.: ALQ100 Trade Mark: AR (Acoustic Research) FCC ID: VIXALQ100 Standards: 47 CFR PART 1, Subpart I, Section 1.1310 Date of Receipt: 2020-08-12 Date of Test: 2020-08-19 to 2020-08-21 Date of Issue: 2020-08-27 Test Result : Pass* * In the configuration tested, the EUT complied with the standards specified above SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800782803 Page: 2 of 8 Revision Record Version Chapter Date Modifier Remark 01 2020-08-27 Original Authorized for issue by: Peter Geng /Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800782803 Page: 3 of 8 1 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 1 CONTENTS ................................................................................................................................................ 3 2 GENERAL INFORMATION ........................................................................................................................ 4 2.1 DETAILS OF E.U.T. ................................................................................................................................... 4 2.2 DESCRIPTION OF SUPPORT UNITS ............................................................................................................. 4 2.3 TEST LOCATION ........................................................................................................................................ 5 2.4 TEST FACILITY .......................................................................................................................................... 5 2.5 DEVIATION FROM STANDARDS ................................................................................................................... 5 2.6 ABNORMALITIES FROM STANDARD CONDITIONS.......................................................................................... 5 3 EQUIPMENTS USED DURING TEST ........................................................................................................ 6 4 TEST RESULTS ......................................................................................................................................... 7 4.1 RF EXPOSURE TEST ................................................................................................................................. 7 4.1.1 E.U.T. Operation ............................................................................................................................ 7 Operating Environment: .............................................................................................................................. 7 EUT Operation: ........................................................................................................................................... 7 4.1.2 Measurement Data......................................................................................................................... 8 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800782803 Page: 4 of 8 2 General Information 2.1 Details of E.U.T. Power supply: AC/DC adapter information, MODEL: TY1200150A1mn INPUT: AC 100-240V, 50/60Hz, 0.8A OUTPUT: DC 12V, 1.5A Cable: DC cable: 180cm, unshielded Operation frequency: 110.42kHz to 164.42kHz Modulation type: Load modulation Antenna type: Coil antenna 2.2 Description of Support Units Description Manufacturer Model No. Serial No. SAMSUNG Galaxy S8 SAMSUNG SM-G9500 R28J9140LPB SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800782803 Page: 5 of 8 2.3 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch E&E Lab, No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong,China 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 2.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C. 2.5 Deviation from S…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800782802 Page: 1 of 28 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZEM2008007828CR Applicant: Voxx Accessories Corp. Address of Applicant: 3502 Woodview Trace, Suite 220, Indianapolis, Indiana 46268 United States Manufacturer: Voxx Accessories Corp. Address of Manufacturer: 3502 Woodview Trace, Suite 220, Indianapolis, Indiana 46268 United States Factory: Shenzhen Feihe Electronics Co., Ltd Address of Factory: 2/F, 3/F and West Side of 4/F, Bldg. 2, Hongfa Innovative Park, Lezhujiao, Jiuwei, Hangcheng Avenue, Bao'an District, Shenzhen, China Equipment Under Test (EUT): EUT Name: LED Desk Lamp with Wireless Charging Model No.: ALQ100 Trade Mark: AR (Acoustic Research) FCC ID: VIXALQ100 Standard(s) : 47 CFR Part 15, Subpart C Date of Receipt: 2020-08-12 Date of Test: 2020-08-19 to 2020-08-21 Date of Issue: 2020-08-27 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800782802 Page: 2 of 28 Revision Record Version Chapter Date Modifier Remark 01 2020-08-27 Original Authorized for issue by: Peter Geng /Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800782802 Page: 3 of 28 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass 20dB Bandwidth 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.9.2 47 CFR Part 15, Subpart C 15.215 Pass Restricted Bands 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 Pass Radiated Emissions (9kHz-30MHz) 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.4 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Emissions (30MHz-1GHz) 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800782802 Page: 4 of 28 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ....................................................................................................................................... 3 3 CONTENTS ................................................................................................................................................ 4 4 GENERAL INFORMATION ........................................................................................................................ 5 4.1 DETAILS OF E.U.T. ........................................................................................…

Text truncated - open the document above for the full version.