VIXHPTWS10AWireless Earbuds

The case for storing your earbuds also charges them. For best performance, we recommend you charge the case fully before using your earbuds. Insert the USB-C charging cable into the charging jack on the bottom of the case. Plug the other end of the charging cable into a USB power source (like a computer or a USB charger). The indicator light on the bottom of the case flashes red while case is charging. The light turns solid red when the case is fully charged. 1. Charge the case2. Turn on the earbuds3. Pair + Connect Choose Jensen TWS10 from the pairing options on your smartphone. (If it’s not in the list, choose “Scan” from your phone’s Bluetooth menu.) The earbuds announce “Connected” when the process is complete. Enable Bluetooth on your smartphone or other device. Wi-Fi Bluetooth Bluetooth Settings VPN Settings Wi-Fi Setting s 8:45P M Note: The process of enabling Bluetooth and connecting varies from device to device. See your device’s owners manual for more information and specific instructions. Unplug the case when it’s charged. To turn on your earbuds: Open the top of the case and take the earbuds out. The earbuds automatically turn on. The earbud indicator lights flash red and blue, and the earbuds announce “Power on.” Note: If the earbuds do not automatically turn on when you take them out of the case, press and hold the back of each earbud as shown here to turn it on manually. Bluetooth Wireless Connection Tips • Make sure the Bluetooth capability of your device is turned on. • The earbuds’ Bluetooth wireless connection works up to a range of roughly 33 feet (10 meters). This range may vary, however, based on other factors, such as room layout, wall material, obstacles, your device’s Bluetooth performance, etc. If you’re having problems connecting to the earbuds, move closer to your phone. • Make sure your device supports audio transfer A2DP. • If your device asks you for a password to connect, use “0000”. To manually pair the earbuds Your earbuds always automatically attempt to reconnect to the last connected device. If you want to pair to a different device, try turning off Bluetooth on the last connected device. Then follow the directions for pairing and connecting with a new device. Listening to music To play/pause music: Press the back of either earbud. To increase volume: Double press the back of the right earbud. The earbud beeps and volume increases. To decrease volume: Double press the back of the left earbud. The earbud beeps and volume decreases. To go to the next song: Triple press the back of the right earbud. To go to the previous song: Triple press the back of the left earbud. Using your phone’s intelligent assistant To access your phone’s intelligent assistant: Press and hold the back of either earbud until you hear a beep, then release. IMPORTANT: Not all phones support playback control and phone answer/end control. Check your phone’s user manual for more information if you’re having trouble with these functions. quick start guide HPTWS10 QSG 04 Using the earbuds Charging and storing your earbuds To recharge your earbuds: Put them back in their case. They turn off automatically when you put them in their case. IMPORTANT: If the case has run out of charge, the earbuds do not turn off or disconnect automatically. Turn the earbuds off manually (see below) and recharge the case. To manually turn off both earbuds: Press and hold the back of either earbud for 4 seconds. wireless earbuds Answering/ending phone calls Your earbuds have built-in microphones, so you can use them for phone calls. Your phone will ring through the earbuds when you’re receiving a call (or the earbuds will announce “You have an incoming call”). To answer or end a phone call: Press the back of either earbud. To decline a phone call: Press and hold the back of either earbud. To switch between calls: Press the back of either earbud during a call. To reject an incoming call: Press and hold the back of either earbud. Unpack Make sure you have the following items in your wireless earbuds package: • Wireless earbuds charging/storage case • Wireless earbuds (inside the case) • USB-C charging cable Go to the next page to get started! Tour of the earbuds and case Earbud speaker Earbud microphone Multi-function button (for calls, music playback, turning off manually, etc.) Case indicator light Earbud indicator light Case power button Case charging port Case top To end the current call and switch to the other call: Double press the back of either earbud.

English Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be observed during handling and use. • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. ADDITIONAL SAFETY INFORMATION • Do not use unauthorized chargers or power adapters. Use only chargers that came with your product or that is listed in the user’s guide. • Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. • Do not attempt to disassemble the cabinet. This product does not contain customer serviceable components. Important battery information Warning: Your product contains a battery and charging system which is designed to work in temperatures that do not exceed 50°C (122°F). Leaving this product in a closed automobile or the trunk of an automobile where temperatures may exceed 50°C may result in permanent battery damage, fire, or explosion. Please remove your product from the automobile when you exit, do not place your product in the trunk of your automobile, and do not leave your product in any location where temperatures may exceed 50°C. This product contains non-removeable Lithium Ion rechargeable batteries. Ecology Your product must be disposed of properly according to local laws and regulations. Because this product contains a battery, the product must be disposed of separately from the household waste. Precautions for the unit • Do not use the unit immediately after transportation from a cold place to a warm place; condensation problems may result. • Do not store the unit near fire, places with high temperature or in direct sunlight. Exposure to direct sunlight or extreme heat (such as inside a parked car) may cause damage or malfunction. • Clean the unit with a soft cloth or a damp chamois leather. Never use solvents. • The unit must only be opened by qualified personnel. Headset safety To use a headset safely, please keep the following in mind: • Do not play your headset at a high volume. Hearing experts advise against continuous extended play. • If you experience ringing in your ears, turn down the volume or stop using the headset. • Do not use a headset while driving a motorized vehicle or riding a bike. It may cause a traffic hazard and is illegal in many areas. • Even if your headset is an open-air type designed to let you hear outside sounds, don’t turn up the volume so high that can’t hear sounds around you. • Never operate heavy machinery while listening to or wearing your headphones Warning Except in case of emergency, VOXX Accessories Corporation recommends you do not use these headphones or headsets (headphones plus microphone) as aviation communication equipment as they are not engineered for many environmental conditions common in commercial or non-commercial aircraft (including, but not limited to: altitude, temperature, noise conditions, unpressurized aircraft, ect) resulting in possible interference to critical communications. Listen Responsibly To avoid hearing damage, make sure that the volume on your music player is turned down before connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume until you reach a comfortable listening level. Noise levels are measured in decibels (dB), exposure to any noise at or above 85 dB can cause gradual hearing loss. Monitor your use; hearing loss is a function of loudness versus time. The louder it is, the less time you can be exposed to it. The softer it is, the more time you can listen to it. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by VOXX Accessories Corporation is under license. Other trademarks and trade names are those of their respective owners. FCC/Industry of Canada Information Changes or modifications not expressly approved by VOXX Accessories Corporation could void the user’s authority to operate the equipment. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Supplier’s Declaration of Conformity Trade Name: Jensen Model: HPTWS10 Responsible Party: Voxx Accessories Corp. Address: 3502 Woodview Trace, Suite 220, Indianapolis, IN 46268 Telephone: 1-317-810-4880 (No technical/product support is available via this number. This phone number is for regulatory matters only.) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. FCC ID: VIXHPTWS10A IC: 21578-HPTWS10A HVIN: HPTWS10AL, HPTWS10AR IC Radiation Exposure Statement: This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada Regulatory Information CAN ICES-3 (B)/NMB-3 (B) Avis d’Industrie Canada CAN ICES-3 (B)/NMB-3 (B) 90-Day Limited Warranty Voxx Accessories Cor…

Text truncated - open the document above for the full version.

A A

Date: 10/20/2022 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: VIXHPTWS10A To whom it may concern: We, the undersigned, hereby authorize Compliance Certification Services (Kunshan) Inc to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Voxx Accessories Corp. This authorization is valid until further written notice from the applicant. Sincerely, Print Name: Paul Tinaphong Title: Senior V.P. Signature: On behalf of Company: Voxx Accessories Corp. Telephone: (317) 2187301 E-mail: [email protected]

To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Regarding: Confidentiality Request regarding application for FCC ID: VIXHPTWS10A LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Print Name: Paul Tinaphong Title: Senior V.P. Signature: On behalf of Company: Voxx Accessories Corp. Telephone: (317) 2187301 E-mail: [email protected]

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Voxx Accessories Corp. Address 3502 Woodview Trace Suite 220 Indianapolis Indiana 46268 United States Grantee Code VIX FCC ID VIXHPTWS10A Authorized Contact Name Paul Tinaphong Contact Email [email protected] Contact Phone (317) 2187301 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 10/20/2022 Print Name: Paul Tinaphong Title: Senior V.P. *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 1 of 6 Appendix External Photos for FYCR2210000407AT FCC ID: VIXHPTWS10A Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 2 of 6 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 3 of 6 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 4 of 6 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 5 of 6 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 6 of 6 - End of the Appendix -

Label placement To Federal Communication Commission Equipment Authorization Branch 7 435 Oakland Mills Road Columbia, MID 21046 For the following product, Product name: Wireless Earbuds Model Number: HPTWS10 FCC ID: VIXHPTWS10A The FCC ID is not affixed on the earbud itself, but described in the user manual and the package due to below reason: The earbud is too small to put the FCC ID on it. Print Name: Paul Tinaphong Title: Senior V.P. Signature: On behalf of Company: Voxx Accessories Corp. Telephone: (317)2187301 E-mail: [email protected]

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 1 of 8 Appendix Internal Photos for FYCR2210000407AT FCC ID: VIXHPTWS10A Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 2 of 8 EUT Constructional Details (EUT Photos) Left earbuds Antenna Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 3 of 8 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 4 of 8 Right earbuds Antenna Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 5 of 8 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 6 of 8 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 7 of 8 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 8 of 8 - End of the Appendix -

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR221000040704 Page: 1 of 11 Winkey Wang EMC Technical Manager RF EXPOSURE EVALUATION REPORT Application No.: FYCR2210000407AT Applicant: Voxx Accessories Corp. Address of Applicant: 3502 Woodview Trace Suite 220, Indianapolis, Indiana 46268 United States Manufacturer: Voxx Accessories Corp. Address of Manufacturer: 3502 Woodview Trace Suite 220, Indianapolis, Indiana 46268 United States Factory: Jingwah Ballet Digital Technology Co., Ltd. Address of Factory: 3rd Floor, Building A1, Iron Tower Industrial Park, Hedi Road, Shang Village, Gong Ming Town, Guang Ming New District, Shenzhen, Guangdong, China Equipment Under Test (EUT): EUT Name: Wireless Earbuds Model No.: HPTWS10 Trade Mark: Jensen FCC ID: VIXHPTWS10A Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2022-10-19 Date of Evaluation: 2022-10-28 to 2022-10-31 Date of Issue: 2022-11-03 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR221000040704 Page: 2 of 11 Revision Record Version Chapter Date Modifier Remark 01 2022-11-03 Original Authorized for issue by: Tree Zhan/Project Engineer Winkey Wang/Reviewer Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR221000040704 Page: 3 of 11 2 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Contents ............................................................................................................................................. 3 3 General Information............................................................................................................................ 4 3.1 General Description of E.U.T. ....................................................................................................... 4 3.2 Details of E.U.T. ........................................................................................................................... 4 3.3 Separation Distance ..................................................................................................................... 5 3.4 Test Location ............................................................................................................................... 6 3.5 Test Facility .................................................................................................................................. 6 3.6 Deviation from Standards ............................................................................................................. 6 3.7 Abnormalities from Standard Conditions ....................................................................................... 6 4 FCC Radiofrequency radiation exposure limits ................................................................................ 7 4.1 Blanket 1 mW Blanket Exemption ................................................................................................. 7 4.2 MPE-based Exemption ................................................................................................................. 7 4.3 SAR-based Exemption ................................................................................................................. 8 5 Measurement and Calculation ..........................................................................................................11 5.1 Maximum transmit power ............................................................................................................11 5.2 RF Exposure Calculation .............................................................................................................11 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR221000040704 Page: 4 of 11 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power Supply: Left earbuds: Li-Ion Polymer Battery 3.7V 30mAh (Charge by travel case) Right earbuds: Li-Ion Polymer Battery 3.7V 30mAh (Charge by travel case) Travel case with backup battery: Li-Ion Polymer Battery 3.7V 300mAh (Charged by Type-C port). Cable(s): USB Cable 34cm Unshielded For BT: Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.3 Dual mode Modulation Type: GFSK, pi/4DQPSK Number of Channels: 79 Channel Spacing: 1MHz Spectrum Spread Technology: Frequency Hopping Spread Spectrum(FHSS) Antenna Type: Chip Antenna Antenna Gain: 1.24dBi For BLE: Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.3 Dual mode Modulation Type: GFSK Data Rate: 1M/bit Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: Chip Antenna Antenna Gain: 1.24dBi Remark: The information in this section is provided by the applicant or manufacturer, CCS is not liable to the accuracy, suitability, reliability or/and integrity of the information. Remark: Only the left earbuds was tested, the electrical circuit design, PCB layout, components used, internal wiring and functions were identical for left earbuds and right earbuds. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR221000040704 Page: 5 of 11 3.3 Separation Distance Minimum test separation distance: 5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. Compliance Certification Services (Kunshan) Inc. Shenzhen B…

Text truncated - open the document above for the full version.

2.4GHz3216ChipAntenna: RANT3216F245C03 Application: WLAN,802.11b/g,Bluetooth,WLAN, etc... Features SMD,highreliability,ultraImpact,Omni- directional... Partnumber Information RANT3216 (A)(B) F (C) 245 (D) C (E) 03 (F) (A)ProductType (B)SizeCode (C)Material ChipAntenna 3.2x1.6mm(±0.2mm) HighKmaterial 2.4~2.5GHz (D)Frequency (E)Feedingmode (F)Antennatype PIFA&Single Feeding Type=03 ElectricalSpecification WorkingFrequencyRange Bandwidth 2400~2500MHz 120MHz(Min.) 1.24dBi(Typ.) 50Ohm PeakGain Impedance Returnloss10dB (Min) PolarizationLinear AzimuthBeamwidth OperationTemperature( °C ) ResistancetoSoldering Heats Omni-directional -40~85 °C 10sec.(@ 280°C) Ni/Au (Leadless) Termination Thespecificationisdefinedon EVB. DimensionandTerminal Configuration Dimension(mm) No. 1 TerminalName Feeding/GNG GND/Feeding L W T 3.20 ± 0.20 1.60±0.20 0.45±0.20 2 咏成國際科技有限公司 電話: TEL: RAINInternationalTechnologyCo., Ltd. 2.4GHz3216ChipAntenna: RANT3216F245C03 EvaluationBoard Reference 长条板 PCB 推荐 圆板 AntennaLayoutReference Dimension Unit:mm ElectricalCharacteristics ReturnLoss& Radiation ReturnLoss S11(dB) Frequency(MHz) 2400 2450 2500 -10.50 -30.62 -11.47 2.4GHz3216ChipAntenna: RANT3216F245C03 Radiation 2400MHz 2450MHz 2500MHz Z X Y 2400MHz 82.52% 2450MHz 85.26% 2500MHz 83.01%Efficiency PeakGain Directivity 1.15dBi 1.89dBi 1.24dBi 1.97dBi 1.19dBi 1.91dBi 2.4GHz3216ChipAntenna: RANT3216F245C03 TapingSpecifications ReelandTaping Specification ReelSpecification TYPESIZE 5K/Reel ABCD 32167” 9.0±0.5 60±213.5±0.5178±2 TappingSpecification PackagingTypeABWEFGHTψDP PaperType3216 1.90±0.23.50±0.28.0±0.21.75±0.13.5±0.054.0±0.102.0±0.050.75±0.11.50±0.1 4.0±0.1 00000 0 2.4GHz3216ChipAntenna: RANT3216F245C03 ReliabilityTable Requirements CeramicType Remark (Reference) TestItem Electrical Procedure Fulfilltheelectrical specification UserSpec. Characterization Thermal Shock 1.Preconditioning:NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 10750±10°C/1hr,thenkeepfor24±1hrsat roomtemp. 2.Initialmeasure:Spec:referInitialspec. 3.Rapidchangeoftemperaturetest: -30°Cto+85°C;100cycles; 15minutesatLowercategory temperature; 15minutesatUppercategory temperature. Temperature Cycling 1.Initialmeasure:Spec:referInitialspec. 2.100Cycles(-30°Cto+85°C),SoakMode=1(2 Cycle/hours). 3.Measurementat24±2Hoursaftertestcondition. NoVisibleDamage. Fulfilltheelectrical specification. JESD22 JA104 HighTemperature Exposure 1.Initialmeasure:Spec:refer Initialspec. 2.Unpowered;500hours@T=+85°C. 3.Measurementat24±2hours aftertest. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 108 LowTemperature Storage 1.Initialmeasure:Spec:refer Initialspec. 2.Unpowered:500hours@T=-30°C. 3.Measurementat24±2hours aftertest. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 108 Solderability (SMDBottomSide) Dippingmethod: a.Temperature:235± 5°C b.Dippingtime:3±0.5s Thesoldershouldcover over95%ofthecritical areaofbottomside. IEC60384-21/22 4.10 SolderingHeat Resistance (RSH) Preheatingtemperature:150± 10°C. Preheatingtime:1~2min. Soldertemperature:260±5°C. Dippingtime:5±0.5s NoVisibleDamage.IEC60384-21/22 4.10 Vibration5g'sfor20min.,12cycleseachof3orientations Note:Use8"X5"PCB.031"thick7securepointson, onelong sideand2securepointsatcornersofoppositesides. Parts mountedwithin2"fromanysecurepoint.Testfrom10- 2000 Hz. NoVisibleDamage.MIL-STD-202 Method204 Mechanical Shock Threeshocksineachdirectionshallbeappliedalongthe three mutuallyperpendicularaxesofthetestspecimen(18 shocks) Peakvalue:1,500g’s NoVisibleDamage.MIL-STD-202 Method213 Duration:0.5ms Velocitychange:15.4ft/s Waveform:Half-sine Humidity Bias 1.Humidity:85%R.H.,Temperature:85± 2°C. 2.Time:500±24hours. 3.Measurementat24±2hrsafter testcondition. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 Method106 2.4GHz3216ChipAntenna: RANT3216F245C01 _ Board Flex (SMD) 1.Mountingmethod:NoVisibleDamage.AEC-Q200 005IR-Reflow.PCBSize(L:100×W:40×T:1.6mm) 2.Applytheloadindirectionofthearrowuntilbending reaches 2mm. AdhesionForceof1.8Kgfor60 seconds. NoVisibleDamageAEC-Q200 006Magnificationof20Xor greatermaybeemployed forinspectionofthe mechanicalintegrityofthe devicebodyterminalsand body/terminaljunction. Physical Dimension Anyapplicablemethodusingx10magnification, micrometers, calipers,gauges,contourprojectors,orothermeasuring equipment,capableofdeterminingtheactualspecimen dimensions. Inaccordancewith specification. JESD22 JB100 RevisionHistory RevisionDateContent 1 2 2019/03/01 2020/02/22 NewDatasheet Add2Dradiation characteristic

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR221000040703 Page: 1 of 58 Winkey Wang EMC Technical Manager TEST REPORT Application No.: FYCR2210000407AT Applicant: Voxx Accessories Corp. Address of Applicant: 3502 Woodview Trace Suite 220, Indianapolis, Indiana 46268 United States Manufacturer: Voxx Accessories Corp. Address of Manufacturer: 3502 Woodview Trace Suite 220, Indianapolis, Indiana 46268 United States Factory: Jingwah Ballet Digital Technology Co., Ltd. Address of Factory: 3rd Floor, Building A1, Iron Tower Industrial Park, Hedi Road, Shang Village, Gong Ming Town, Guang Ming New District, Shenzhen, Guangdong, China Equipment Under Test (EUT): EUT Name: Wireless Earbuds Model No.: HPTWS10 Trade Mark: Jensen FCC ID: VIXHPTWS10A Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2022-10-19 Date of Test: 2022-10-28 to 2022-10-31 Date of Issue: 2022-11-03 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR221000040703 Page: 2 of 58 Revision Record Version Chapter Date Modifier Remark 01 2022-11-03 Original Authorized for issu…

Text truncated - open the document above for the full version.