VIXJWLKBM12.4G Wireless Keyboard

IMPORTANT INFORMATION for Jensen JWLKBM Important Battery Precautions • Any battery may present a risk of fire, explosion, or chemical burn if abused. Do not try to charge a battery that is not intended to be recharged, do not incinerate, and do not puncture. • Non-rechargeable batteries , such as alkaline batteries, may leak if left in your product for a long period of time. Remove the batteries from the product if you are not going to use it for a month or more. • If your product uses more than one battery, do not mix types and make sure they are inserted correctly. Mixing types or inserting incorrectly may cause them to leak. • Discard any leaky or deformed battery immediately. They may cause skin burns or other personal injury. • Please help to protect the environment by recycling or disposing of batteries according to federal, state, and local regulations. • Do not mix old and new batteries • Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cad, Ni-MH, etc.) batteries. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by VOXX Accessories Corporation could void the user’s authority to operate the equipment. RF Exposure Warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada Regulatory Information This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s) Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. IC Radiation Exposure Statement: This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments. The transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device operates on a no-interference, no-protection basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio licence is required. For further details, consult Innovation, Science and Economic Development Canada’s Client Procedures Circular CPC-2-1-28, Voluntary Licensing of Licence-Exempt Wireless Microphones in the TV Bands. Industry Canada Regulatory Information: CAN ICES-3 (B)/NMB-3 (B) Avis d’Industrie Canada: CAN ICES-3 (B)/NMB-3 (B) HVINs: JWLKBM0, JWLKBM1, JWLKBM2 INFORMATIONS IMPORTANTES pour Jensen JWLKBM Précautions importantes relatives aux piles • Toute pile peut présenter un risque d’incendie, d’explosion ou de brûlure chimique en cas de traitements inappropriés. Ne pas essayer de charger une pile qui n’est pas conçue pour être rechargée, ne pas l’incinérer et ne pas la percer. • Les piles non rechargeables, par exemple les piles alcalines, peuvent fuir si on les laisse dans un appareil pendant une longue période. Enlever les piles du produit s’il n’est pas utilisé durant un mois ou plus. • Si le produit fonctionne avec plusieurs piles, ne pas mélanger différents types de piles, et veiller à les insérer correctement. Mélanger les piles ou les insérer incorrectement peut provoquer des fuites. • Jeter immédiatement toute pile présentant des fuites ou toute pile déformée. Ces piles peuvent provoquer des brûlures ou d’autres types de blessures. • Protéger l’environnement en recyclant ou en éliminant les piles conformément aux réglementations provinciales et locales. • Ne pas mélanger des piles neuves avec des piles anciennes. • Ne pas mélanger des piles alcalines, standard (carbone-zinc) ou rechargeables (cadmium-nickel). Déclaration de la FCC Cet appareil est conforme à la partie 15 du règlement de la FCC. Son fonctionnement est soumis aux deux conditions suivantes : 1) Cet appareil ne doit pas provoquer de brouillage préjudiciable, et 2) cet appareil doit accepter tout brouillage reçu, y compris le brouillage susceptible de provoquer un fonctionnement indésirable. Remarque : Cet équipement a été soumis à des essais et a été déclaré conforme aux limites stipulées pour un appareil numérique de classe B, conformément aux spécifications de la partie 15 du règlement de la FCC. Ces limites ont pour but d’assurer une protection raisonnable contre le brouillage nuisible dans une installation résidentielle. Cet équipement produit, utilise et peut émettre de l’énergie en radio fréquence et, s’il n’est pas installé et utilisé conformément aux directives, il peut causer un brouillage nuisible d…

Text truncated - open the document above for the full version.

Date: Sept. 14, 2022 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR ( 2.4G Wireless Keyboard / JWLKBM1 /FCC ID: VIXJWLKBM1 ) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the ( Block Diagrams, Schematics, Operational Descriptions ) required to be submitted with this application be permanently withheld from public review. The above documents are company proprietary information that could never get into the possession of your competition. Please contact me if there is any information you may need. Sincerely, Signature: Name: Paul Tinaphong Applicant: Voxx Accessories Corp. Address: 3502 Woodview Trace, Suite 220, Indianapolis, Indiana United States TEL: ( 317 ) 2187301

Date: Sept 13, 2022 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Eurofins Electrical Testing Service (Shenzhen) Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Name: Paul Tinaphong Applicant: Voxx Accessories Corp. Address: 3502 Woodview Trace, Suite 220, Indianapolis, Indiana United States TEL: (317) 2187301

HVIN: JWLKBM1 Input: 1 x 1.5V AAA battery FCC ID: VIXJWLKBM1 IC: 21578-JWLKBM1 Made in China 60MM This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 136MM HVIN: JWLKBM1 Input: 1 x 1.5V AAA battery FCC ID: VIXJWLKBM1 IC: 21578-JWLKBM1 Made in China 438MM 30MM 尺寸：438*136*24MM This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 贴纸： 字体Arial 25AA39GN 25AA39GN 黑底白字

AntennaSpecification Specifications Summary ITEMSPEC. ModelNameIBM2.4GHz CenterFrequency2402MHz-2.10dBi 2441MHz-1.78dBi 2480MHz-1.52dBi MAX.GAIN-1.52dBi PolarizationHorizontal AzimuthBeamPatternOmni-directional Impedance50Ω AntennaLength31.5cm AntennaPhoto&Length PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn Manufacturer：Voxx Accessories Corp. 1.Mainantenna:2402MHz 1.1Horizontal 1.2Vertical 2.Mainantenna:2441MHz 2.1Horizontal PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn 2.2Vertica . 3.Mainantenna:2480MHz 3.1Horizontal PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn 3.2Vertical 4.Result CenterFrequencyMaximumAntGain 2402MHzH-2.10dBi V-5.02dBi 2441MHzH-1.78dBi V-5.80dBi 2480MHzH-1.52dBi V-4.52dBi PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn

Test Report No.: EFGX22080247-IE-01-E02 Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. 1st Floor, Building 2, Chungu, Meisheng Huigu Science and Technology Park, No. 83 Dabao Road, Bao'an District, Shenzhen. P.R.China. Telephone: +86-755-82911867, Fax : +86-755-82910749 Page 1 of 28 EUROFINS ELECTRICAL TESTING SERVICE (SHENZHEN) CO., LTD. RADIO TEST - REPORT FCC& Compliance Test Report for Product name: 2.4G Wireless Keyboard Model name: JWLKBM1 FCC ID: VIXJWLKBM1 IC: 21578-JWLKBM1 Test Report Number: EFGX22080247-IE-01-E02 Test Report No.: EFGX22080247-IE-01-E02 Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. 1st Floor, Building 2, Chungu, Meisheng Huigu Science and Technology Park, No. 83 Dabao Road, Bao'an District, Shenzhen. P.R.China. Telephone: +86-755-82911867, Fax : +86-755-82910749 Page 2 of 28 1 General Information 3 1.1 Notes 3 1.2 Testing laboratory 4 1.3 Details of applicant 4 1.4 Details of manufacturer 4 1.5 Application details 5 1.6 Test item 5 1.7 Test standards 5 2 Technical test 6 2.1 Summary of test results 6 2.2 Test environment 6 2.3 Measurement uncertainty 6 2.4 Test mode 7 2.5 Test equipment utilized 8 2.6 Auxiliary Equipment Used during Test: 8 2.7 Test software information: 8 2.8 Test setup 9 2.9 Test results 11 3 Technical requirement and result 12 3.1 20 dB bandwidth 12 3.2 99% Occupied Bandwidth 15 3.3 Radiated emission 18 Test Report No.: EFGX22080247-IE-01-E02 Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. 1st Floor, Building 2, Chungu, Meisheng Huigu Science and Technology Park, No. 83 Dabao Road, Bao'an District, Shenzhen. P.R.China. Telephone: +86-755-82911867, Fax : +86-755-82910749 Page 3 of 28 1 General Information 1.1 Notes The results of this test report relate exclusively to the item tested as specified in chapter “Description of test item” and are not transferable to any other test items. Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. is not responsible for any generalisations and conclusions drawn from this report. Any modification of the test item can lead to invalidity of test results and this test report may therefore be not applicable to the modified test item. The test report may only be reproduced or published in full. Reproducing or publishing extracts of the report requires the prior written approval of the Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. This document is subject to the General Terms and Conditions and the Testing and Certification System of Eurofins Electrical Testing Service (Shenzhen) Co., Ltd., available on request or accessible at www.eurofins.com. Operator: 2022-09-19 Bruce Zheng / Project Engineer Date Eurofins-Lab. Name / Title Signature Technical responsibility for area of testing: 2022-09-19 Albert Xu / Lab Manager Date Eurofins Name / Title Signature Test Report No.: EFGX22080247-IE-01-E02 Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. 1st Floor, Building 2, Chungu, Meisheng Huigu Science and Technology Park, No. 83 Dabao Road, Bao'an District, Shenzhen. P.R.China. Telephone: +86-755-82911867, Fax : +86-755-82910749 Page 4 of 28 1.2 Testing laboratory Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. 1st Floor, Building 2, Chungu, Meisheng Huigu Science and Technology Park, No. 83 Dabao Road, Bao'an District, Shenzhen. P.R.China. Telephone : +86-755-82911867 Fax : +86-755-82910749 The Laboratory has passed the Accreditation by the American Association for Laboratory Accrediation (A2LA). The Accreditation number is 5376.01 The Laboratory has been listed by industry Canada to perform electromagnetic emission measurements, The CAB identifier is CN0088 1.3 Details of applicant Name : Voxx Accessories Corp. Address : 3502 Woodview Trace, Suite 220, Indianapolis, Indiana United States Telephone : ./. Fax : ./. 1.4 Details of manufacturer Name : Voxx Accessories Corp. Address : 3502 Woodview Trace, Suite 220, Indianapolis, Indiana United States Telephone : ./. Fax : ./. Test Report No.: EFGX22080247-IE-01-E02 Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. 1st Floor, Building 2, Chungu, Meisheng Huigu Science and Technology Park, No. 83 Dabao Road, Bao'an District, Shenzhen. P.R.China. Telephone: +86-755-82911867, Fax : +86-755-82910749 Page 5 of 28 1.5 Application details Date of receipt of application : 2022-08-18 Date of receipt of test item : 2022-08-18 Date of test : 2022-08-18 to 2022-09-02 Date of issue : 2022-09-19 1.6 Test item Product type : 2.4G Wireless Keyboard Model name : JWLKBM1 Brand : Jensen Serial number : ./. Ratings : 1.5Vdc supplied by 1*1.5Vdc type ”AAA” batteries Test voltage : 1.5Vdc FCC ID : VIXJWLKBM1 IC : 21578-JWLKBM1 Hardware Version : V1.0 Software / Firmware Version : V1.0 PMN : 2.4G Wireless Keyboard HVIN : JWLKBM1 Additional information : ./. RadioTechnical data Frequency range : 2402MHz – 2480MHz Radio Tech. : 2.4G SRD Frequency channel : 40 Modulation : GFSK Antenna type : PCB antenna Antenna gain : -1.52 dBi Note： The above sample(s) and sample information was/were submitted and identified on behalf of the applicant. Eurofins assures objectivity and impartiality of the test, and fulfills the obligation of confidentiality for applicant’s commercial information and technical documents. 1.7 Test standards Test Standards FCC Part 15 Subpart C PART 15 - RADIO FREQUENCY DEVICES Subpart C - Intentional Radiators RSS-210 Issue 10 December 2019 RSS-210 — Licence-Exempt Radio Apparatus: Category I Equipment Test Method 1: ANSI C63.4-2014, American National Standard for Methods of Measurement of Radio-Noise Emis- sions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. 2: ANSI C63.10-2013, American National Standard for Testing Unlicensed Wireless Devices. Test Report No.: EFGX22080247-IE-01-E02 Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. 1st Floor, Building 2, Chungu, Meisheng Huigu Science and Technology Park, No. 83 Dabao Road, Bao'an District, Shenzhen. P.R.China. Telep…

Text truncated - open the document above for the full version.