VIXPNP80Wireless Soothing Projector

POWER/PAIR BT LIGHT PROJECTOR TIMER SOUNDS ON Unpack (1) Soothing Projector (1) Power adapter Getting Started 1. PLUG IN The Project Nursery Soothing Projector offers 2 options for power: • power adapter • 3 AAA batteries (not included) Everyday use USING BLUETOOTH To turn the projector on and off: Press and hold the on the front of the projector. To play music from your phone on the projector: Make sure the projector is on and its BT indicator is solid blue (if it isn’t, give a quick press to the button). Then start playing music on your phone. To play/pause music: Press the button on the projector or use the playback controls on your phone. To control volume: Use the – and + buttons on the projector or the volume controls on your phone. To turn built-in sounds on: Make sure the projector is on (press and hold if it’s not), then press the SOUNDS ON button. To cycle through these sounds: Press the SOUNDS ON button again. Each press goes to a different selection. To adjust the volume: Press the – or + button. Soothing Projector, back Soothing Projector, bottom Remove the battery door and insert 3 AAA batteries (not included) into the battery compartment. (Match the polarity signs on the inside of the compartment!) Place the battery door back on the bottom of the Soothing Projector. Screw the battery door latch back into place to lock the door. To use the power adapter: Plug the power adapter into the DC IN 6V jack on the back of the Soothing Projector. Plug the other end of the power adapter into a working outlet or surge protector. Battery door Door latch screw IMPORTANT: NEVER place the Soothing Projector or cords of any kind inside the crib. NEVER place the Soothing Projector or cords within reach of children. THIS IS NOT A TOY. Soothing Projector, front POWER/PAIR BT LIGHT PROJECTOR TIMER SOUNDS ON POWER/PAIR BT LIGHT PROJECTOR TIMER SOUNDS ON To switch to Bluetooth: Press the button To turn off all sounds: Press and hold the button to turn the soother/projector off. Note: If you hear a vibrating noise when you’re playing sounds, it might be the battery compartment door on the bottom of the projector. Check to make sure the battery door is completely closed and its latch is securely screwed in. 3. PAIR WITH YOUR PHONE Make sure your phone’s Bluetooth is turned on. Then open its Bluetooth menu and choose “Project Nursery PNP80” from the list of available devices. After a few seconds, the speaker announces “Device connected” and the BT indicator turns solid blue. Notes: When you turn it on, the PNP80 tries to reconnect with the last device it was connected to. If you’d like to pair to a new device instead, give a quick double- press to the . The speaker announces “Pairing,” and the BT indicator starts blinking rapidly. The PNP80 is ready to pair to your new device! The process of enabling Bluetooth and connecting varies from device to device. See your device’s owners manual for more information and specific instructions. POWER/PAIR BT LIGHT PROJECTOR TIMER SOUNDS ON POWER/PAIR BT LIGHT PROJECTOR TIMER SOUNDS ON POWER/PAIR BT LIGHT PROJECTOR TIMER SOUNDS ON 2. TURN ON Press and hold the button on the front of the projector to turn it on. The speaker plays the power on sound. After a few seconds, BT indicator starts flashing rapidly and the speaker announces “Pairing.” To use batteries: Use a flathead screwdriver (not included) to unlatch the battery door on the bottom of the Soothing Projector. POWER/PAIR BT LIGHT PROJECTOR TIMER SOUNDS ON POWER/PAIR BT LIGHT PROJECTOR TIMER SOUNDS ON POWER/PAIR BT LIGHT PROJECTOR TIMER SOUNDS ON Bluetooth Wireless Connection Tips • Make sure the Bluetooth capability of your device is turned on. • The Bluetooth wireless connection works up to a range of roughly 33 feet (10 meters). This range may vary, however, based on other factors, such as room layout, wall material, obstacles, your device’s Bluetooth performance, etc. If you’re having problems connecting to this speaker, move closer to it. • If your device asks you for a password to connect, use “0000”. PLAYING THE BUILT-IN SOUNDS The Project Nursery Soothing Projector offers a variety of built-in soothing lullabies and nature sounds, as well as white noise, to calm baby. Quick Start Guide Questions? Just call 1-844-393-7338 or visit ProjectNursery.com ©2022 Voxx Accessories Corp. 3502 Woodview Trace, Suite 220 Indianapolis, IN 46268 PNP80 QSG 00 Soothing Projector, top CHANGING THE PROJECTOR IMAGES The Project Nursery Soothing Projector offers three sets of images: colors/shapes (for newborns), sealife, and transportation. To change to a different image set: Make sure the projector is off. Gently twist the door on the top of the projector to unlatch it. Then lift the door off. On the bottom of the projector door, there’s a white image wheel with the three sets of images. Grab the outside edges of the wheel and gently rotate them to the left or right until you feel a click. (If you can’t go in one direction, try the other direction). Each click is a different image set. Hold the projector door up to a light to see which set you’re on. When you’ve found the one you want, place the projector door back on top of the projector and twist it back into place. Image wheel (on the underside of the projector door) POWER/PAIR BT LIGHT PROJECTOR TIMER SOUNDS ON Soothing Projector, front POWER/PAIR BT LIGHT PROJECTOR TIMER SOUNDS ON USING THE LIGHT The front of the Soothing Projector offers soft area illumination in three levels of brightness, to complement the projector lighting. To turn the light on: Make sure the projector is on (press and hold if it’s not). Press the (LIGHT) button on the front of the projector. To adjust or turn off the light: Press the LIGHT button repeatedly to cycle through the settings (high, medium, low, and off). USING THE TIMER The timer shuts the projector, light, and sound off automatically after 1 hour. To set the timer: Press the (TIMER) button on the front of the projector. The i…

Text truncated - open the document above for the full version.

IMPORTANT INFORMATION for Project Nursery PNP80 RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Clean only with dry cloth. 6. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 9. Unplug this apparatus during lightning storms or when unused for long periods of time. 10. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Care and Maintenance • Always use a soft cloth to clean the speaker and transmitter. Never use any product containing alcohol or other solvents as they may damage the surface. • Use caution when plugging the power transformers in an AC outlet to avoid the risk of electric shock. • If the speaker are used outside on a deck or patio, make sure you take them indoors in the event of a rainstorm to prevent possible damage. • Do not operate or store the system in extreme temperatures (below 32ºF/0ºC and above 122ºF/50ºC). For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall be easily accessible. The power unit for this device should be plugged in so that it stays vertical or lies flat. The apparatus shall not be exposed to dripping or splashing or placed near objects filled with liquids. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by VOXX Accessories Corporation could void the user’s authority to operate the equipment. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Supplier’s Declaration of Conformity 47 CFR § 2.1077 Compliance Information Unique Identifier Trade Name: Project Nursery, Model No.: PNP80 PNP80 Safety-Warranty 00 Product Information Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. These numbers are located on the product. Model No.: _____________________________________________________________________ Purchase Date: _________________________________________________________________ Dealer/Address/Phone: __________________________________________________________ 12 Month Limited Warranty Voxx Accessories Corporation (the “Company”) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company’s option) without charge for parts and repair labor. To obtain repair or replacement within the terms of the warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to an approved warranty station. For the location of the nearest warranty station to you, call toll-free to our control office: 1-800-645-4994. This Warranty is not transferable and does not cover product purchased, serviced or used outside the United States or Canada. The warranty does not extend to the elimination of externally generated static, noise, or loss of range or audio/video quality due to external factors, to costs incurred for the installation, removal or reinstallation of the product, or to damage to digital media devices or memory. The warranty does not apply to any product or part thereof which, in the opinion of the company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident or exposure to moisture. This warranty does not apply to damage caused by an AC adapter not provided w…

Text truncated - open the document above for the full version.

Date: 05/16/2022 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: VIXPNP80 To whom it may concern: We, the undersigned, hereby authorize Compliance Certification Services (Kunshan) Inc and Kidd Yang in Compliance Certification Services (Kunshan) Inc to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Voxx Accessories Corp. This authorization is valid until further written notice from the applicant. Sincerely, Print Name: Paul Tinaphong Title: Senior V.P. Signature: On behalf of Company: Voxx Accessories Corp. Telephone: (317) 2187301 E-mail: [email protected]

To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Regarding: Confidentiality Request regarding application for FCC ID: VIXPNP80 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Print Name: Paul Tinaphong Title: Senior V.P. Signature: On behalf of Company: Voxx Accessories Corp. Telephone: (317) 2187301 E-mail: [email protected]

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 1 of 6 External Photos for FYCR2205000167AT FCC ID: VIXPNP80 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 2 of 6 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 3 of 6 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 4 of 6 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 5 of 6 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 6 of 6

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 1 of 6 Internal Photos for FYCR2205000167AT FCC ID: VIXPNP80 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 2 of 6 EUT Constructional Details (EUT Photos) Antenna Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 3 of 6 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 4 of 6 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 5 of 6 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 6 of 6

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220500016703 Page: 1 of 10 Kidd Yang EMC Laboratory Manager 1 Cover Page RF Exposure Report Application No.: FYCR2205000167AT Applicant: Voxx Accessories Corp. Address of Applicant: 3502 Woodview Trace Suite 220, Indianapolis, Indiana 46268 United States Manufacturer: Voxx Accessories Corp. Address of Manufacturer: 3502 Woodview Trace Suite 220, Indianapolis, Indiana 46268 United States Factory: Smart Glory Electronics (ShenZhen) Co., Ltd Address of Factory: Building Four, No.63, Zhangqi Road, Qiping Village, Daping Community, Guanlan Street, Longhua New District, Shenzhen Equipment Under Test (EUT): EUT Name: Wireless Soothing Projector Model No.: PNP80 Trade mark: Project Nursery FCC ID: VIXPNP80 Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2022-05-13 Date of Test: 2022-05-17 to 2022-05-24 Date of Issue: 2022-05-26 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220500016703 Page: 2 of 10 Revision Record Version Chapter Date Modifier Remark 01 2022-05-26 Original Authorized for issue by: Tree Zhan/Project Engineer Winkey Wang/Reviewer Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220500016703 Page: 3 of 10 2 Contents Page 1 COVER PAGE .................................................................................................................................... 1 2 CONTENTS ........................................................................................................................................ 3 3 GENERAL INFORMATION ................................................................................................................ 4 3.1 GENERAL DESCRIPTION OF E.U.T. ................................................................................................ 4 3.2 DETAILS OF E.U.T. ....................................................................................................................... 4 3.3 SEPARATION DISTANCE ................................................................................................................ 4 3.4 TEST LOCATION ............................................................................................................................ 5 3.5 TEST FACILITY .............................................................................................................................. 5 4 FCC RADIOFREQUENCY RADIATION EXPOSURE LIMITS .......................................................... 6 4.1 BLANKET 1 MW BLANKET EXEMPTION ........................................................................................... 6 4.2 MPE-BASED EXEMPTION .............................................................................................................. 6 4.3 SAR-BASED EXEMPTION ............................................................................................................... 7 5 MEASUREMENT AND CALCULATION .......................................................................................... 10 5.1 MAXIMUM TRANSMIT POWER ....................................................................................................... 10 5.2 RF EXPOSURE CALCULATION ...................................................................................................... 10 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220500016703 Page: 4 of 10 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power Supply: AC adapter: Model: NLA030060W1A6 Input: 100-240V 50/60Hz 0.2A Max. Output: 6V 300mA or 3 x 1.5V AAA batteries. Cable(s): DC cable 180cm unshielded Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.2 Classic Modulation Type: GFSK, pi/4DQPSK, 8DPSK Number of Channels: 79 Channel Spacing: 1MHz Spectrum Spread Technology: Frequency Hopping Spread Spectrum(FHSS) Antenna Type: PCB Antenna Antenna Gain: 0dBi 3.3 Separation Distance Minimum test separation distance: 5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220500016703 Page: 5 of 10 3.4 Test Location All tests were performed at: Compliance Certification Services（Kunshan）Inc. Shenzhen branch. Fuyong lab. Xinlong TechnoPark,Fengtang Road, Fuyong Subdistrict, Bao’an, Shenzhen, China Tel: +86 755 8866 3988 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 6606.01) Compliance Certification Services（Kunshan）Inc. Shenzhen branch is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 6606.01. • FCC –Designation Number: CN1322 Compliance Certification Services（Kunshan）Inc. Shenzhen branch has been recognized as an accredited testing laboratory. Designation Number: CN1322. Test Firm Registration Number: 718073 • Innovation, Science and Economic Development Canada Compliance Certification Services（Kunshan）Inc. Shenzhen branch has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0129. IC#: 28189. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220500016703 Page: 6 of 10 4 FCC Radiofrequency radiation exposure limits Test exemptions apply for devices used in general population/uncontrolled exposure environments, according to the SAR-based, or MPE-based exemption thresholds. 4.1 Blank…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220500016702 Page: 1 of 105 Kidd Yang EMC Laboratory Manager TEST REPORT Application No.: FYCR2205000167AT Applicant: Voxx Accessories Corp. Address of Applicant: 3502 Woodview Trace Suite 220, Indianapolis, Indiana 46268 United States Manufacturer: Voxx Accessories Corp. Address of Manufacturer: 3502 Woodview Trace Suite 220, Indianapolis, Indiana 46268 United States Factory: Smart Glory Electronics (ShenZhen) Co., Ltd Address of Factory: Building Four, No.63, Zhangqi Road, Qiping Village, Daping Community, Guanlan Street, Longhua New District, Shenzhen Equipment Under Test (EUT): EUT Name: Wireless Soothing Projector Model No.: PNP80 Trade Mark: Project Nursery FCC ID: VIXPNP80 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2022-05-13 Date of Test: 2022-05-17 to 2022-05-24 Date of Issue: 2022-05-26 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220500016702 Page: 2 of 105 Revision Record Version Chapter Date Modifier Remark 01 2022-05-26 Original Authorized for issue by: Tree Zhan/Project Engineer Winkey Wang/Reviewer Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220500016702 Page: 3 of 105 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence N/A 47 CFR Part 15, Subpart C 15.247(a)(1),(g),(h) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Peak Output Power ANSI C63.10 (2013) Section 7.8.5 47 CFR Part 15, Subpart C 15.247(b)(1) Pass 20dB Bandwidth ANSI C63.10 (2013) Section 7.8.7 47 CFR Part 15, Subpart C 15.247(a)(1) Pass Carrier Frequencies Separation ANSI C63.10 (2013) Section 7.8.2 47 CFR Part 15, Subpart C 15.247a(1) Pass Hopping Channel Number ANSI C63.10 (2013) Section 7.8.3 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Dwell Time ANSI C63.10 (2013) Section 7.8.4 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 7.8.6 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 7.8.8 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220500016702 Page: 4 of 105 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ....................................................................................................................................... 3 3 CONTENTS ................................................................................................................................................ 4 4 GENERAL INFORMATION ........................................................................................................................ 6 4.1 DETAILS OF E.U.T. ............................................................................................................................... 6 4.2 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 6 4.3 MEASUREMENT UNCERTAINTY .............................................................................................................. 6 4.4 TEST LOCATION .................................................................................................................................... 7 4.5 TEST FACILITY ...................................................................................................................................... 7 4.6 DEVIATION FROM STANDARDS ............................................................................................................... 7 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................... 7 5 EQUIPMENT LIST ...................................................................................................................................... 8 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................... 13 6.1 ANTENNA REQUIREMENT .................................................................................................................... 13 6.1.1 Test Requirement: ....................................................................................................................... 13 6.1.2 Conclusion ................................................................................................................................... 13 6.2 OTHER REQUIREMENTS FREQUENCY HOPPING SPREAD SPECTRUM SYSTEM HOPPING SEQUENCE ........ 14 6.2.1 Test Requirement: ....................................................................................................................... 14 6.2.2 Conclusion ................................................................................................................................... 14 7 RADIO SPECTRUM MATTER TEST RESULTS ...................................................................................…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 1 of 3 Appendix Photographs of Test Setup for FYCR2205000167AT FCC ID: VIXPNP80 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 2 of 3 Test Setup Photos Conducted Emissions at AC Power Line (150kHz-30MHz) Radiated Spurious Emissions Below 1GHz Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 3 of 3 Radiated Spurious Emissions Above 1GHz