VIXSP901Portable Bluetooth Speaker

Q U I C K S T A R T G U I D E Bluetooth wireless is a quick and easy way to connect a smartphone to a speaker or a headset. There are basically two steps to making Bluetooth work. PAIRING: The two devices get to know each other. CONNECTING: The two devices do something together (like play music). “Hi. I’m a phone.” This guide takes you through the steps to get started. Getting to know Bluetooth “Hi phone. I’m a speaker.” 1 Make sure the following items came in this package. Step 1: Unpack Your speaker AC adapter Audio cable 2 Step 2: Charge Before you start using the HEX TL speaker for the first time, it’s a good idea to charge it completely. To charge the speaker: Plug the included AC adapter into the DC IN jack on the back of the speaker. Plug the other end of the AC adapter into a wall outlet. Speaker back The BATTERY indicator on the top of the speaker is red while the speaker is charging. It turns green when the speaker is fully charged. Note: You can use the speaker while it’s charging. 3 BATTERYSTATUS Step 3: Turn on Press the button on top of the speaker to turn it on. The speaker gives an audio signal and the STATUS indicator light on top of the speaker starts blinking. BATTERYSTATUS BATTERYSTATUS Speaker top If this is the first time you’re using the speaker, it automatically goes to Bluetooth pairing mode to set up with your smartphone. 4 Enable Bluetooth on your smartphone or other device. Step 4: Pair + Connect If you’ve previously paired your phone or other Bluetooth device with this speaker, the speaker will automatically attempt to reconnect to that device when you switch the speaker on. If you want to pair to a new device, press and hold the PAIR button on the speaker until the speaker gives an audio signal. Wi-Fi Bluetooth Bluetooth Settings VPN Settings Wi-Fi Setting s 8:45P M Make sure the STATUS light on the top of the speaker is blinking rapidly. (If it isn’t, press and hold the PAIR button until the speaker gives an audio signal.) BATTERYSTATUS BATTERYSTATUS Speaker top 5 Bluetooth Wireless Connection Tips • Make sure the Bluetooth capability of your device is turned on. • Make sure there’s nothing plugged into the speaker’s AUX IN jack when you’re trying to use Bluetooth. • The Bluetooth wireless connection works up to a range of roughly 33 feet (10 meters). This range may vary, however, based on other factors, such as room layout, wall material, obstacles, your device’s Bluetooth performance, etc. If you’re having problems connecting to this speaker, move closer to it. • Make sure your device supports audio transfer A2DP. • If your device asks you for a password to connect, use “0000”. Choose 808 Hex TL from the pairing options on your smartphone. (If it’s not in the list, choose “Scan” from your phone’s Bluetooth menu.) Headset 808 Hex TL Computer 8:45P M Bluetoot h devices The speaker gives an audio signal when it’s finished pairing and connecting to your smartphone. The STATUS indicator on the top of the speaker turns solid blue. Note: The process of enabling Bluetooth and connecting varies from device to device. See your device’s owners manual for more information and specific instructions. 6 To adjust the volume of your audio: Use the — and + buttons on top of the speaker. You can also use the volume controls on your phone. Set your device’s volume for music to 75%. Note: This is to make sure the sound from the speaker isn’t too loud when you start streaming. Start playing music or other audio on your device. Within seconds, the speaker starts streaming the audio wirelessly via Bluetooth. Step 5: Play music 8 :45P M Now playin g Media volume 8 :45P M BATTERYSTATUS BATTERYSTATUS Speaker top Notes: When you reach the speaker’s maximum volume, the STATUS indicator blinks when you press the + button. If you notice sound distorting even at low volumes, turn the volume down on your phone. 7 Use the audio cable included with this speaker to connect the audio output from your device to the AUX IN audio input on the speaker’s back panel. The speaker automatically switches to the AUX IN audio. To listen to Bluetooth audio again, unplug the cable from the speaker’s AUX IN jack. Using the AUX IN input Speaker back 8 Tour of the speaker Top of the speaker BATTERYSTATUS PAIR button puts the speaker into pairing mode to connect to a new Bluetooth device, like a smartphone. — and + adjust the volume of the speaker. turns the speaker on and off. STATUS light shows the Bluetooth pairing and connection status of the speaker: • fast blinking while pairing • slow blinking while reconnecting • solid blue when connected via Bluetooth • solid white when AUX IN jack is in use • off when the speaker’s off. 9 Back of the speaker AUX IN jack lets you connect an audio device directly to the speaker using the provided audio cable. DC IN jack connects to the provided power adapter to plug the speaker into a power outlet. BATTERY light shows the charging status of the speaker: red when charging, green when fully charged. For more information about your new HEX TL speaker, see the User Guide. If you have any questions about this product, visit 808Audio.com or call our toll-free help line at 1-800-732-6866. SP901 QSG 01 Important Information for 808 Audio SP901 RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Clean only with dry cloth. 6. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where t…

Text truncated - open the document above for the full version.

FILE NAME: APPROVED BY: DRAWN BY: DELYL MATERIAL/THICKNESS: DATE: 2015-01-14 DATE: DWG.NO: SHEET 1 1 OF 1 MODEL: BS1480 PART NO: REV: A1 TITLE: CHECKED BY: LMT DATE CHG.BY PART NO DESCRIPTION ECN NO REVISION REVISION RECORD BLOCK DIAGRAM OF BS1480 AAI Acoustic Arc International Ltd. DATE: BLOCK DIAGRAM OF BS1480 1.PART1: RF Preamplifier, mixing, IF amplifier,Demodulation FUNCTIONAL DESCRIPTION 2.PART2: Line Input And U5 Bluetooth Input U2 Switch Function and Volume Control 5.PART5: DC 14V1A U101 Charging module and 8XAA Battery Power Supply AAi-E-BL-A-0323 U5 Bluetooth PART1 PART2 PART3 ANT PART4 3.PART3: U4 PAM8006A AUDIO AMPLIFIER IC 4.PART4: DC BATTERY INPUT POWER SUPPLY AMP_VDD U1,3,7 Manostat 9V,3.9V,3.6V U4 PAM8006A U6 2314 3.5mm Line_IN XZ2107 Q4 SHUT_DOWN 7809_9.0V U7 DC14V1A POWER BATTEERY PART5 2.400-2.483GHz XZ3303_3.9V U1 CLK DATA SUPPLY HR6912 U101 11.1V 2000mAH U2 MCU XZ1803_3.6V U3 7.6V D2 D5 PART6 CH PWR_EN BAT_IN VDD VDD VBB LIN_AMP 6.PART6: MCU Control Part ZTA 16MHz LED1-A BLUE LED1-B WHITE VOL+ VOL- PAIR POWER LEDR RED LEDG GREEN 3.6V DC14V The Block Diagram

180

INTERTEK TESTING SERVICE Report: 14101209HKG-001 FCC ID: VIXSP901 Equipment Photographs Model: SP901 (External) IC: 342H-SP901 INTERTEK TESTING SERVICE Report: 14101209HKG-001 FCC ID: VIXSP901 Equipment Photographs Model : SP901 (External) IC: 342H-SP901

808-SP901BK(BS1480) Bluetooth speaker rating label 808-SP901WH(BS1480) Bluetooth speaker rating label P/N: 95-09-BS1480-02 Portable bluetooth speaker rating label Note: Size: 40*40mm Print: Gray font,White ground,back glue. Unit: mm Tolerance: +/-0.5mm Scale: 1:1 P/N: 95-09-BS1480-01 Portable bluetooth speaker rating label Note: Size: 40*40mm Print: White font,Blackground,back glue. Unit: mm Tolerance: +/-0.5mm Scale: 1:1 On
speaker
bottom On
speaker
bottom Model: SP901 Power Source: 14 1A FCC ID: VIXSP901 IC: 342H-SP901 Portable Bluetooth speaker BC CAN ICES-3 (B)/NMB-3 (B) Model: SP901 Power Source: 14V 1A Portable Bluetooth speaker FCC ID: VIXSP901 IC: 342H-SP901 BC CAN ICES-3 (B)/NMB-3 (B) Model: SP901 Power Source: 14V 1A Portable Bluetooth speaker FCC ID: VIXSP901 IC: 342H-SP901 BC CAN ICES-3 (B)/NMB-3 (B) Model: SP901 Power Source: 14 1A FCC ID: VIXSP901 IC: 342H-SP901 Portable Bluetooth speaker BC CAN ICES-3 (B)/NMB-3 (B)

INTERTEK TESTING SERVICE Report: 14101209HKG-001 Equipment Photographs Model : SP901 (Internal) FCC ID: VIXSP901 IC: 342H-SP901 INTERTEK TESTING SERVICE Report: 14101209HKG-001 Equipment Photographs Model : SP901 (Internal) FCC ID: VIXSP901 IC: 342H-SP901 INTERTEK TESTING SERVICE Report: 14101209HKG-001 Equipment Photographs Model : SP901 (Internal) FCC ID: VIXSP901 IC: 342H-SP901 INTERTEK TESTING SERVICE Report: 14101209HKG-001 Equipment Photographs Model : SP901 (Internal) FCC ID: VIXSP901 IC: 342H-SP901 INTERTEK TESTING SERVICE Report: 14101209HKG-001 Equipment Photographs Model : SP901 (Internal) FCC ID: VIXSP901 IC: 342H-SP901 INTERTEK TESTING SERVICE Report: 14101209HKG-001 Equipment Photographs Model : SP901 (Internal) FCC ID: VIXSP901 IC: 342H-SP901

Technical Description The brief circuit description is listed as below: 1) U5 acts as 2.4GHz RF Module (BS851). 2) U2 acts as MCU (SN8P2722). 3) U1 and U3 act Voltage Regulators (XZ3303, XZ1803). 4) U4 acts as Audio Amplifier (PAM8006A). 5) U101 acts as Battery Charger (HR6912). 6) U6 acts as Audio Processor (2314). 7) X1 acts as a Crystal for U5. Antenna Type: Internal antenna Antenna Gain: 0dBi Nominal rated field strength: 96.7 dBμV/m at 3m Maximum allowed field strength of production tolerance: +/- 3dB

Analysis Report The Equipment Under Test (EUT) is a 2.4GHz Bluetooth 3.0 transceiver speaker. The EUT is power by an AC Adapter (Model: K15S140100U; Input 100-240V, 50/60Hz, 0.5A; Output: 14.0V, 1.0A) and also contains an 11.1V rechargeable battery. The Bluetooth module in the EUT is operating in the frequency range from 2402MHz to 2480MHz (79 channels with 1MHz channel spacing). After pairing, the audio signal can be fed to the speaker. Also there is an Aux in for audio input. Antenna Type: Internal antenna Antenna Gain: 0dBi Nominal rated field strength: 96.7 dBμV/m at 3m Maximum allowed field strength of production tolerance: +/- 3dB According to the KDB 447498: Based on the Maximum allowed field strength of production tolerance was 99.7dBμV/m at 3m in frequency 2.4GHz, thus; The EIRP = [(FS*D) ^2*1000 / 30] = 2.80mW Conducted power = Radiated Power (EIRP) – Antenna Gain So; Conducted Power =2.80mW. The power density at 20cm = 2.80 *1.00/ 4πR 2 = 0.00056 mWcm-2 In the frequency range of 1,500 - 100,000MHz, the MPE limit is 1.0 mWcm -2 for general population and uncontrolled exposure. As the measured power density at 20cm from the transmitter is lower than the MPE limit, the compliance to the MPE limit can be ensured by indicating the minimum 20cm separation between the transmitter's radiating structures and body of the user or nearby persons. The following RF exposure statement is proposed to be included in the user manual: RF Exposure Warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End- users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.”

PART NO. REVISION ECN NO. DESCRIPTION APPR.BY DATE CHG BY REVISION RECORD MATERIAL/THICKNESS: DRAWING BY: CHECKED BY: APPROVED BY: DATE: DATE: DATE: PART NO: DWG NO.: MODEL : REV: FILE NAME: A1 1 OF 2 SHEET: TITLE: BOARD1 BS1480(808Rechargeable) AAi Acoustic Arc International Ltd. SCHEMATIC OF BS1480 AAI-E-SC-A-0325 FR4 / 1.0mm 20150109 DELYL BAT+ BAT- DET IN GND R- LED+ G- 3V6 WHITE CH LMT ECN A1 CHg: R56 R52 R6 R11 R21 ADd: D2 D5 R95 * * * * * * * 150005 DEl :R1 D4 2314 Q12 MMBT3904 R11 6.8M R13 220K C5 0.1UF Q13 MMBT3904 R21 6.8M R22 220K C32 0.1UF D9 D10 R32 220K Q14 MMBT3904 R35 1.5M C16 682pf R38 180K 3 TREB_L 4 TREB_R 5 RIN 6 ROUT 7 LOUD_R 8 RIN4 9 RIN3 10 RIN2 11 RIN1 12 LOUD_L 13 LIN4 14 LIN3 2 AGND 1 VDD 15 LIN2 16 LIN1 17 LIN 18 LOUT 19 BIN_L 20 BOUT_L 21 BIN_R 22 BOUT_R 23 OUT_R 24 OUT_L 25 DGND 26 DATA 27 CLK 28 REF U6 R4 10K R5 10K R6 12K R7 10K C29 100nF C31 100nF C33 100nF R8 5.6K C30 2.7nF + C34 22UF C37 100nF C38 100nF C39 100nF C42 2.7nF R9 5.6K C21 105 C7 105 4 P0.3RST 5 P0.4 6 P0.5 7 P0.6 8 P0.7 9 P5.0 10 P5.1 3 P0.2 2 P0.1 1 VSS 11 P5.2 12 P5.3 13 P5.4 14 P4.0 15 P4.1 16 P4.2 17 P4.3 18 P4.4 19 P0.0 20 VDD U2 SN8P2722 C27 2.2UF C46 105 C47 2.2UF C48 2.2UF C53 105 C55 105 C58 105 C59 105 C9 105 C10 2.2UF C1 10UF C3 10uF/10V C6 0.1uF R43 47K R04 100R Q1 MMBT3904 R16 100K R76 15K R77 10K R19 10K C19 0.1uF C22 10uF 2 GND 3 EN 1 VIN 5 VOUT 4 BP U3 C40 0.1uF R26 1K R61 100K R62 100K R65 4K7 C67 0.1uF 1 S 2 S 3 S 4 G 8 D 7 D 6 D 5 D Q4 XZ2107 Q8 MMBT3904 R52 4.7k R56 18k 2 VIN 3 VOUT 1 GND U7 HT7590 C44 10uF/10V C45 10uF/10V C12 104 C13 104 D8 1N4148 D3 1N4148 C11 104 1 2 SW1 1 2 SW2 V+ 1 2 SW3 V- 1 3 2 BLUE 6 5 4 3 2 1 7 8 9 10 JK1 R1-1 10K + C4 470UF/10V + C14 470UF/10V C18 10uF/10V C24 0.1uF C36 0.1uF C25 10uF 2 GND 3 EN 1 VIN 5 VOUT 4 BP U1 C43 0.1uF 11 MICN1 12 MIC_BIAS 13 NP 14 NP 15 RST_N 16 ADAP_IN 17 VDD_IO 10 MICP1 9 GND 8 CODEC_VO 7 SPKL 6 AOHPM 5 NP 4 P04 3 P00 2 P30 1 P20 34 GND 33 BT_RF 32 P23 31 P15 30 HCI_RXD 29 HCI_TXD 28 P05 27 P16 26 P22 25 LED2 24 LED1 23 MFB 22 BK_OUT 21 GND 20 P03 19 SYS_PWR 18 BAT_IN U5 ZYM_BS851 1 P1 1 P2 1 P3 1 P4 1 P5 1 P6 G D S Q15 XZ2101 C17 106 Q19 MMBT3904 R39 10K R40 2k2 1 2 PAIR R-1 10K D1 DZ551 + C15 220uF/16V G D S Q2 XZ2103 R20 10K C91 1UF C96 104 C97 105 C2 472 C23 472 C86 1UF R27 10R C87 105 C85 105 R33 NC C90 105 R36 10K C98 105 C35 104 R37 0R R49 56K R51 10K L6 10uH,6X8,2.6A L8 10uH,6X8,2.6A SPKL WOOFER E5 1000uF/25V R2 NC Q3 NC C41 101 C50 101 C52 101 SPKH WOOFER C26 4.7uF/10V L2 260mH,6X8,>1.5A R41 NC C8 NC R34 10K C20 NC R25 10K C28 105 1 NC 2 RINN 3 RINP 4 MUTE 5 AVDD 6 LINP 7 LINN 8 NC 9 PGNDL 10 PVCCL 11 LOUTN 12 BSLN 13 BSLP 14 LOUTP 15 PVCCL 16 PGNDL 17 NC 18 PL 19 V2P5 20 AGND 21 VCLAMP 22 AVCC 23 SD 24 NC 25 PGNDR 26 PVCCR 27 ROUTP 28 BSRP 29 BSRN 30 ROUTN 31 PVCCR 32 PGNDR U4 PAM8006A C49 4.7uF/10V Q6 MMBT3906 Q7 MMBT3904 R46 133K C51 105 C56 106 C57 1UF C60 NC R44 100K R3 10K R10 1K R24 100K R94 0R D2 4148 D5 4148 R95 200R AUX_DET 3V6 3V6 PA_EN PWR_EN CH AUX_DET CLK DATA CLK DATA RST 9V LINE_IN_DET PAUSE BAT_DET MFB AM-MUTE LED1 EN LED1OUT LED2OUT PWR_EN PA_EN VBB BAT_DET PWR_BTN 7.6V 9V 3V6 LINE-IN-DET 3V6 3V6 7.6V 3V9 PAUSE BT_MUTE MFB LED1 BT3.3V BT3.3V BT3.3V 3V9 3V6 LED2 DC_SD AM-MUTE LIN-AMP VBB VBB AVCC VBB LIN-AMP LED2 EN 7.6V GREEN RED L R BAT+ BAT- LIEN-IN-DET LINE-IN GND R- G+ G- 3.6V MATERIAL/THICKNESS: DRAWING BY: CHECKED BY: APPROVED BY: DATE: DATE: DATE: PART NO: DWG NO.: MODEL : REV: FILE NAME: A1 2 OF 2 SHEET: TITLE: BS1480(808Rechargeable) AAi Acoustic Arc International Ltd. SCHEMATIC OF BS1480 AAI-E-SC-A-0325 FR4 / 1.0mm 20150109 DELYL CH HR6912A LMT 150uH/2A * * * * * PART NO. REVISION ECN NO. DESCRIPTION APPR.BY DATE CHG BY REVISION RECORD ECN A1 CHg: R106 R107 R108 ADd : C001 C002 C003 150005 C105 10uF/10V LED102 J101 LED101 R111 75k R105 17.4K1% L101 4.7UH/2A D103 XZ551 R108 0R25 C101 1uF + C103 220uF/25V D101 SR240 1 TIM 2 RS 3 BAT 4 NTC 8 IN 7 LX 6 STAT 5 CEL U101 R109 5.1K R112 56K C102 10uF R107 0R036 Q5 XZ2102 C304 47P C324 47P L301OR L303OR C362 220p R310 2.2K C306 33nF R320 3.3K C305 2.2uF C301 2.2uF C366 0R R353 NC R354 NC C368 33P R357 0R R358 0 R R359 15K R360 15K C361 2.2uF R301 200K 9 10 11 12 15 8 14 13 18 17 16 JK3 AUDIO-SW PHONEJACK STEREO 6 5 4 3 2 1 7 8 9 10 JK1-1 2 1 J3 BAT_3 R68 0R22 R73 1K R74 100K Q16 MMBT3904 R78 0R091 R79 100K R80 4K7 C025 0.1uF S D G Q22 2101 NTC 10k R106 2.2k1% R14 62K R18 22K D102 SS34 R100 10k L102 L103 33UH/1.5A C001 472 C002 472 C003 472 L R 3V6 LINE_IN_DET LINE_IN_DET LEDR- LED+ LEDG- 3.6V 3V6 CH CH 55 44 33 22 11 D D C C B B A A P12 RF_TP GNDP04P00VDD_IO P13 AOHPMSPKL MFB HCI_RXDGNDHCI_TXDP05 BT_RF LED2P23P15 P20P30RST_NADAP_IN LED1HCI_TXD SPKL P16 P03 P30 RTX P04 P01 P22P05 XO_P P20 VCOM LED2 XO_N P24 AOHPM HCI_RXD P00 MICP1MICN1 RF BT_RF LED1MFBBK_OUTGNDP03SYS_PWRBAT_IN MIC_BIAS BK_LX P13 MICP1MICN1MIC_BIAS P23P15 RST_N P12 EAN P16P22 VDD_IO VDD_IO SYS_PWR 1V8 BAT_IN ADAP_IN BK_OUT 1V8 BK_OUT SYS_PWR CODEC_VO VDD_IO VDD_IO VDD_IO CODEC_VO CODEC_VO 1V8 TitleSize Document Number Rev Date: Sheet of REV1.0 B 11 TitleSize Document Number Rev Date: Sheet of REV1.0 B 11 TitleSize Document Number Rev Date: Sheet of REV1.0 B 11 EEPROM24C32 PIN DEFINATION MYBM85SPK02 U2U2 A0 1 A1 2 A2 3 GND 4 SDA 5 SCL 6 WP 7 VCC 8 C11 1u/10V C11 1u/10V C1810u/10VC1810u/10V C4 1u/10V C4 1u/10V C1010u/10VC1010u/10V C19 0.1u/16V C19 0.1u/16V C51p/50VC51p/50V R2 NP-0402 R2 NP-0402 C7 10p/50V C7 10p/50V R61RR61R 1 2 L1 1.8nH L1 1.8nH X1X4P-16MHZX1X4P-16MHZ 41 32 R10R10 12 C3NP-0402C3NP-0402 IS1685SIS1685S AOHPM 1 AOHPL 2 VDDA 3 MIC_P1 5 MIC_N1 6 MIC_BIAS 7 VDD_IO 8 RST_N 11 3V1_O 15 3V1_IN 17 ADAP_IN 18 SAR_AVDD 20 SYS_PWR 21 BK_VDD 22 BK_LX 23 XO_N 36 XO_P 35 VDD_IO 34 HCI_RXD 32 HCI_TXD 31 P2_4 28 LED2 27 LED1 26 MFB 25 BK_OUT 24 GND 49 VDDAO 48 EAN 47 VDD_IO 46 P0_0 44 P2_0 43 P0_3 41 P0_1 40 RTX 39 RX_CLASS1 38 VCC_RF 37 BAT_IN 19 VCOM 4 P1_2 12 P1_3 13 1V8 14 P1_6 33 P0_5 30 P2_3 9 P1_5 10 P0_4 45 CODEC_VO 16 P3_0 42 P2_2 29 R51KR51K 12 R81KR81K 12 C17 1u/10V …

Text truncated - open the document above for the full version.

- Intertek's standard Terms and Conditions can be obtained at our website http://www.intertek.com/terms/. - The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. - This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com TEST REPORT Report No.: 14101209HKG-001 Voxx Accessories Corp. Application For Certification (Original Grant) (FCC ID: VIXSP901) Transceiver Prepared and Checked by: Approved by: Signed On File Leung Sung Tak, Andy Assistant Engineer Wong Kwok Yeung, Kenneth Lead Engineer Date: February 17, 2015 INTERTEK TESTING SERVICES Report No.: 14101209HKG-001 i FCC ID: VIXSP901 GENERAL INFORMATION Grantee: Voxx Accessories Corp. Grantee Address: 3502 Woodview Trace, suite 220, Indianapolis, Indiana 46268, United States. Contact Person: Milan Phillabaum Tel: 317-218-7296 Fax: 317-569-0284 e-mail: N/A Manufacturer: Shenghai Electronics (Shenzhen) Ltd Manufacturer Address: Block 17&18, Hui Ming Ying Industry, YanChuan, SongGang, Baoan Country, Shenzhen 518105, China. Brand Name: 808 Model: SP901 Type of EUT: Transceiver Description of EUT: Portable Bluetooth Speaker Serial Number: N/A FCC ID: VIXSP901 Date of Sample Submitted: October 31, 2014 Date of Test: October 31, 2014 to February 04, 2015 Report No.: 14101209HKG-001 Report Date: February 17, 2015 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% INTERTEK TESTING SERVICES Report No.: 14101209HKG-001 ii FCC ID: VIXSP901 SUMMARY OF TEST RESULT TEST SPECIFICATION REFERENCE RESULTS Transmitter Power Line Conducted Emissions 15.207 Pass Radiated Emission Radiated Emission on the Bandedge 15.249 15.209 Pass Radiated Emission in Restricted Bands 15.205 Pass The equipment under test is found to be complying with the following standards: FCC Part 15, October 1, 2013 Edition Note: 1. The EUT uses a permanently attached antenna which, in accordance to section 15.203, is considered sufficient to comply with the pervisions of this section. 2. Pursuant to FCC part 15 Section 15.215(c), the 20 dB bandwidth of the emission was contained within the frequency band designated (mentioned as above) which the EUT operated. The effects, if any, from frequency sweeping, frequency hopping, other modulation techniques and frequency stability over excepted variations in temperature and supply voltage were considered. INTERTEK TESTING SERVICES Report No.: 14101209HKG-001 iii FCC ID: VIXSP901 Table of Contents 1.0 General Description.........................................................................................1 1.1 Product Description ........................................................................................1 1.2 Related Submittal(s) Grants............................................................................1 1.3 Test Methodology ...........................................................................................1 1.4 Test Facility ....................................................................................................1 2.0 System Test Configuration ..............................................................................2 2.1 Justification.....................................................................................................2 2.2 EUT Exercising Software................................................................................3 2.3 Special Accessories .......................................................................................3 2.4 Measurement Uncertainty...............................................................................3 2.5 Support Equipment List and Description.........................................................3 3.0 Emission Results .............................................................................................4 3.1 Field Strength Calculation...............................................................................4 3.2 Radiated Emission Configuration Photograph ................................................5 3.3 Radiated Emission Data .................................................................................5 3.4 Conducted Emission Configuration Photograph .............................................5 3.5 Conducted Emission Data ..............................................................................5 4.0 Equipment Photographs ................................................................................12 5.0 Product Labelling ...........................................................................................12 6.0 Technical Specifications ...............................................................................12 7.0 Instruction Manual .........................................................................................12 8.0 Miscellaneous Information ............................................................................13 8.1 Radiated Emission on the Bandedge......................…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICE Report No: 14101209HKG-001 Configuration Photographs Worst-Case Radiated Emissions (Front View) Model : SP901 FCC ID: VIXSP901 IC: 342H-SP901 INTERTEK TESTING SERVICE Report No: 14101209HKG-001 Configuration Photographs Worst-Case Radiated Emissions (Back View) Model : SP901 FCC ID: VIXSP901 IC: 342H-SP901

INTERTEK TESTING SERVICE Report No: 14101209HKG-001 FCC ID: VIXSP901 IC: 342H-SP901 Configuration Photographs Worst-Case Line-Conducted Emissions (Front View) Model: SP901 INTERTEK TESTING SERVICE Report No: 14101209HKG-001 FCC ID: VIXSP901 IC: 342H-SP901 Configuration Photographs Worst-Case Line-Conducted Emissions (Side View) Model: SP901 INTERTEK TESTING SERVICE Report No: 14101209HKG-001 FCC ID: VIXSP901 IC: 342H-SP901 Configuration Photographs Worst-Case Line-Conducted Emissions (Side View) Model: SP901