VIXSPKA04Bluetooth Microphone

Important Information for Singsation SPKA04 RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Clean only with dry cloth. 6. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 9. Unplug this apparatus during lightning storms or when unused for long periods of time. 10. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Care and Maintenance • Always use a soft cloth to clean the speaker and transmitter. Never use any product containing alcohol or other solvents as they may damage the surface. • Use caution when plugging the power transformers in an AC outlet to avoid the risk of electric shock. • If the speaker are used outside on a deck or patio, make sure you take them indoors in the event of a rainstorm to prevent possible damage. • Do not operate or store the system in extreme temperatures (below 32ºF/0ºC and above 122ºF/50ºC). Ecology Your product must be disposed of properly according to local laws and regulations. Because this product contains a rechargeable battery, the product must be disposed of separately from the household waste. For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall be easily accessible. The power unit for this device should be plugged in so that it stays vertical or lies flat. The apparatus shall not be exposed to dripping or splashing or placed near objects filled with liquids. This product contains a non-removeable Lithium Ion rechargeable battery. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by VOXX Accessories Corporation could void the user’s authority to operate the equipment. 90-Day Limited Warranty Voxx Accessories Corporation (the “Company”) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company’s option) without charge for parts and repair labor. To obtain repair or replacement within the terms of the warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to an approved warranty station. For the location of the nearest warranty station to you, call toll-free to our control office: 1-800-645-4994. This Warranty is not transferable and does not cover product purchased, serviced or used outside the United States or Canada. The warranty does not extend to the elimination of externally generated static or noise, to costs incurred for the installation, removal or reinstallation of the product. The warranty does not apply to any product or part thereof which, in the opinion of the company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident or exposure to moisture. This warranty does not apply to damage caused by an AC adapter not provided with the product, or by leaving non-rechargeable batteries in the product while plugged into an AC outlet. THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO DURATION OF THIS WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER, INCLUDING ANY IMPLIED WARRANTY, MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM THE DATE OF ORIGINAL PU…

Text truncated - open the document above for the full version.

QUICK START GUIDE Instructions en français ...................7 Instrucciones en español ................14 SPKA04 NA QSG 00 SOLO ALL -IN-ONE KARAOKE SYSTEM PRO 2 Make sure the following items came in this package. Step 1: Unpack Singsation Solo Pro Karaoke System + Wireless Speaker Micro-USB charging cable Before you start using the Singsation Solo Pro for the first time, it’s a good idea to charge it completely. Front Step 2: Charge To charge the Singsation Solo: Plug the included micro-USB charging cable into the charging jack on the underside of the Singsation Solo Pro’s control panel. Plug the other end of the USB charging cable into a power source, like a computer or a USB charging adapter. The charging indicator on the front of the Singsation Solo Pro is red while the speaker is charging. It turns off when the Singsation Solo Pro is fully charged. 3 Step 3: Turn on Press and hold the POWER/PAIR button until the Singsation Solo Pro plays its startup sound. Then release it. The POWER/PAIR light starts blinking. After a few seconds, the Singsation Solo Pro goes to Bluetooth pairing mode to set up with your smartphone. Enable Bluetooth on your smartphone or other device. Step 4: Pair + Connect Wi-Fi Bluetooth Bluetooth Settings VPN Settings Wi-Fi Settings 8:45PM Make sure the POWER/ PAIR light on the front of the Singsation Solo Pro is blinking. (If it isn’t, give a short double- press on the POWER/PAIR button. The POWER/PAIR light starts blinking.) Continues on the next page... Front Front 4 If you’ve previously paired your phone or other Bluetooth device with the Singsation Solo, it will automatically attempt to reconnect to that device when you switch it on. If you want to pair to a new device, give a short double-press to the POWER/PAIR button. The Singsation Solo announces “Pairing” and the POWER/PAIR button starts blinking. Choose Singsation Solo PRO from the pairing options on your smartphone. (If it’s not in the list, choose “Scan” from your phone’s Bluetooth menu.) The Singsation Solo Pro announces “Device Connected” when it’s finished pairing and connecting to your smartphone. The POWER/PAIR light turns solid blue. Note: The process of enabling Bluetooth and connecting varies from device to device. See your device’s owners manual for more information and specific instructions. Bluetooth Wireless Connection Tips • Make sure the Bluetooth capability of your device is turned on. • The Bluetooth wireless connection works up to a range of roughly 33 feet (10 meters). This range may vary, however, based on other factors, such as room layout, wall material, obstacles, your device’s Bluetooth performance, etc. If you’re having problems connecting to this speaker, move closer to it. • If your device asks you for a password to connect, use “0000”. 5 Make sure the Singsation Solo Pro is on. (Press and hold the POWER/ PAIR button on the front of the Singsation Solo if it isn’t.) Start playing music on your Bluetooth device and sing along! To adjust the volume of your voice: Use the VOLUME + and — buttons on the front of the Singsation Solo Pro. To adjust the volume of the music: Use the volume controls on your Bluetooth device. To adjust voice echo: use the ECHO slider on the front of the Singsation Solo Pro. Step 5: Sing along! Front 6 Tour of the Singsation Solo Pro POWER/PAIR button turns the Singsation Solo Pro on/off (press and hold until you hear the startup/ shut-down sound), and puts the Singsation Solo Pro into pairing mode (short double-press when on). POWER/PAIR indicator shows the Bluetooth status: • blinking blue while pairing or reconnecting • solid blue when paired • off when the Singsation Solo Pro is off. ECHO adjusts the echo effect on your voice. VOLUME + and — buttons adjust the volume of your voice. (Adjust the volume of your music from your phone.) Charging indicator turns red while the Singsation Solo Pro is charging. It turns off when it’s charged. Charging jack (underside of the control panel) connects to the provided USB charging cable to plug the Singsation Solo Pro into a power source or adapter. Charging jack POWER/PAIR indicator Charging indicator

Date: 2020-7-23 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: VIXSPKA04 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Voxx Accessories Corp. This authorization is valid until further written notice from the applicant. Print Name: Paul Tinaphong Title: VP engineering Signature: On behalf of Company: Voxx Accessories Corp. Telephone: (317) 218-7301 E-mail: [email protected]

Date: 2020-7-23 To: Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Regarding: Confidentiality Request regarding application for FCC ID: VIXSPKA04 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Print Name: Paul Tinaphong Title: VP engineering Signature: On behalf of Company: Voxx Accessories Corp. Telephone: (317) 218-7301 E-mail: [email protected]

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Voxx Accessories Corp. Address 3502 Woodview Trace, Suite 220 Indianapolis Indiana 46268 United States Grantee Code VIX FCC ID VIXSPKA04 Authorized Contact Name Paul Tinaphong Contact Email [email protected] Contact Phone (317)218-7301 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 2020-7-23 Print Name: Paul Tinaphong Title: VP engineering *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 5 External Photos for SZEM2007006419CR FCC ID: VIXSPKA04 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 5 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 5

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation. Rating A20070(GP-A250 Model: SPKA04 Input: 5V 1A FCC ID: VIXSPKA04 IC: 21578-SPKA04 Made in China 6X15 GP laser date code(laser) SPKA04 CAN ICES-3 (B)/NMB-3 (B) laser

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 5 Internal Photos for SZEM2007006419CR FCC ID: VIXSPKA04 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 5 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 5

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200700641903 Page: 1 of 7 Keny Xu EMC Laboratory Manager 1 Cover page SAR Evaluation Report Application No.: SZEM2007006419CR Applicant: Voxx Accessories Corp. Address of Applicant: 3502 Woodview Trace suite 220 Indianapolis Indiana 46268 United States Manufacturer: Voxx Accessories Corp. Address of Manufacturer: 3502 Woodview Trace suite 220 Indianapolis Indiana 46268 United States Factory: Shenzhen Great Power Innovation and Technology Enterprise Co., Ltd Address of Factory: No. 331, No. 335, Guiyue Road, Dafu Community, Guanlan Street, Longhua District, Shenzhen, China Equipment Under Test (EUT): EUT Name: Bluetooth Microphone Model No.: SPKA04 Trade mark: Singsation FCC ID: VIXSPKA04 Standards: 47 CFR Part 1.1307 47 CFR Part 2.1093 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2020-07-14 Date of Test: 2020-07-27 to 2020-07-29 Date of Issue: 2020-07-29 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200700641903 Page: 2 of 7 2 Version Revision Record Version Chapter Date Modifier Remark 01 2020-07-29 Original Authorized for issue by: Bill/Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200700641903 Page: 3 of 7 3 Contents Page 1 COVER PAGE ........................................................................................................................................ 1 2 VERSION ................................................................................................................................................ 2 3 CONTENTS ............................................................................................................................................ 3 4 GENERAL INFORMATION ..................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 4 4.2 TEST LOCATION ................................................................................................................................ 5 4.3 TEST FACILITY .................................................................................................................................. 5 4.4 DEVIATION FROM STANDARDS ............................................................................................................ 6 4.5 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................... 6 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER .......................................................................... 6 5 SAR EVALUATION ................................................................................................................................. 7 5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ........................................................................................ 7 5.1.1 Standard Requirement ................................................................................................................ 7 5.1.2 Limits .......................................................................................................................................... 7 5.1.3 EUT RF Exposure ....................................................................................................................... 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200700641903 Page: 4 of 7 4 General Information 4.1 General Description of EUT Power Supply: Rechargeable battery:DC 3.7V 1500mAh (Charging by USB) Bluetooth Version: V5.0 Operation Frequency: 2402MHz to 2480MHz Number of Channels: 79 Modulation Type: GFSK, Pi/4DQPSK Channel Spacing: 1MHz Data rate: 1Mbit/s Spectrum Spread Technology: Frequency Hopping Spread Spectrum(FHSS) Antenna Type: PIFA Antenna Gain: -0.58dBi Hardware Version: V00 Software version： V1.0 Test software & version： FCCAssist & V1.0 S/N: 3X29GP FVIN version: V2.6.3 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200700641903 Page: 5 of 7 4.2 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. 4.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200700641903 Page: 6 of 7 4.4 Deviation from Standards None. 4.5 Abnormalities …

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 3 Setup Photos for SZEM2007006419CR FCC ID: VIXSPKA04 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 3 1 Photographs 1.1 Conducted Test Setup SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 3 1.2 Radiated Spurious Emissions Test Setup Below 1GHz Above 1GHz