VIXSPKA30QKaraoke System with Bluetooth

Important Information for Singsation Model SPKA30Q CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. WARNING: Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Care and Maintenance • Always use a soft cloth to clean the speaker and transmitter. Never use any product containing alcohol or other solvents as they may damage the surface. • Use caution when plugging the power transformers in an AC outlet to avoid the risk of electric shock. • If the speaker is used outside on a deck or patio, make sure you take it indoors in the event of a rainstorm to prevent possible damage. The apparatus shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus. No naked flame sources, such as lighted candles, should be placed on the apparatus. WARNING: The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain readily operable. Do not install this equipment in a confined space such as a book case or similar unit. The ventilation should not be impeded by covering the ventilation openings with Items such as newspaper, table-cloths, curtains etc. Care is required with the use of this apparatus in moderate climates. See marking on the back of the product. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by VOXX Accessories Corporation could void the user’s authority to operate the equipment. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Supplier’s Declaration of Conformity 47 CFR § 2.1077 Compliance Information Unique Identifier Trade Name: Singsation, Model No.: SPKA30Q Responsible Party VOXX Accessories Corporation 3502 Woodview Trace, Suite 220, Indianapolis, IN 46268 https://www.singsationkaraoke.com/ Industry Canada Regulatory Information This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s) Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Industry Canada Regulatory Information Avis d’Industrie Canada CAN ICES-3 (B)/NMB-3 (B) CAN ICES-3 (B)/NMB-3 (B) IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Cet équipement est conforme aux limites d’exposition aux radiations I…

Text truncated - open the document above for the full version.

QUICK START GUIDE Instructions en français .......................................9 Instrucciones en español ....................................17 2 Press and hold the POWER button on the front of the Singsation Classic to turn it on. The Singsation Classic plays its startup sound and the BLUETOOTH indicator starts blinking slowly. Note: If you didn’t hear the startup sound, make sure the MASTER VOLUME knob is turned up! Step 2: Plug in Step 3: Turn on Step 1: Unpack Make sure the following items came in this package: • Singsation Classic Karaoke System + Wireless Speaker • Microphone • AC Adapter Attach one end of the AC adapter to the DC IN jack on the back of the Singsation Classic. Plug the other end of the adapter into a working outlet or surge protector. Front After 15–30 seconds, the Singsation Classic announces “Pairing” and goes to Bluetooth pairing mode to set up with your Bluetooth device. The BLUETOOTH indicator starts blinking faster. 3 Enable Bluetooth on your smartphone or other Bluetooth device. Step 4: Pair + Connect Wi-Fi Bluetooth Bluetooth Settings VPN Settings Wi-Fi Settings 8:45PM Make sure the BLUTOOTH indicator on the front of the Singsation Classic is blinking rapidly. (If it isn’t, give a short double-press on the PAIR button. The Singsation Classic announces “Pairing.”) Front If you’ve previously paired your phone or other Bluetooth device with the Singsation Classic, it will automatically attempt to reconnect to that device when you switch it on. If you want to pair to a new device, give a short double-press to the PAIR button. The Singsation Classic announces “Pairing” and the BLUETOOTH indicator starts blinking. Choose Singsation Classic from the pairing options on your Bluetooth device. (If it’s not in the list, choose “Scan” from your device’s Bluetooth menu.) The Singsation Classic announces “Device Connected” when it’s finished pairing and connecting to your Bluetooth device. The BLUETOOTH indicator turns solid blue. Note: The process of enabling Bluetooth and connecting varies from device to device. See your device’s owners manual for more information and specific instructions. Bluetooth Wireless Connection Tips • Make sure the Bluetooth capability of your device is turned on. • Make sure there’s nothing plugged into the Singsation Classic’s AUX IN jack when you’re trying to use Bluetooth. • The Bluetooth wireless connection works up to a range of roughly 33 feet (10 meters). This range may vary, however, based on other factors, such as room layout, wall material, obstacles, your device’s Bluetooth performance, etc. If you’re having problems connecting to the speaker, move closer to it. • If your device asks you for a password to connect, use “0000”. 4 Step 5: Sing along! The Singsation Classic comes with a microphone you can use to sing along or make announcements! To sing along: Plug the provided microphone into the MIC 1 IN jack on the front of the Singsation Classic. Start playing music on your Bluetooth device and start singing! Front To adjust the volume of your voice: Use the MIC 1 VOLUME knob on the Singsation Classic. To adjust the volume of your music: Use the volume controls on your Bluetooth device. To adjust the volume of everything: Use the MASTER VOLUME knob on the Singsation Classic. To use a second mic: Plug a second mic (not included) into the MIC 2 IN jack on the front of the Singsation Classic. Use the MIC 2 VOLUME knob to control its volume. Fun with Voice Effects and Echo To change voice effects: Press the VOICE FX button. Keep pressing to try all the effects! To add an echo to your voice: Press the ECHO button. The echo effect has three levels—low, mid, max. Press the ECHO button repeatedly to increase the effect. The fourth press turns the effect off. 5 Using Dynamic Lighting The LIGHTING button on front of the Singsation Classic gives you control over the Classic’s built-in dynamic lighting. Press the LIGHTING button to cycle through the multiple lighting modes: Party 1 and 2: The light changes colors to the beat of the music (1) or mic (2). Dance 1 and 2: The light pulses and changes color to the beat of your music (1) or mic (2). Chill: The light gradually intensifies and diminishes and changes color. Breathe: The light gradually intensifies and diminishes on a single color. Press the COLOR button to change colors. Still: The light stays on. Press the COLOR button to select a color. Disco: The light slowly goes through all the colors. Rave: The light goes through the colors at lightning speed. Press the COLOR button to change colors. Off: The last press turns the lighting o ff. Front 6 Tour of the Singsation Classic 7 BLUETOOTH indicator shows the Bluetooth status of the Singsation Classic (solid is connected; fast flashing means pairing, and slow flashing means not connected). AUX indicator illuminates when an audio source is plugged into the auxiliary input on the back of the Singsation Classic. POWER button turns the speaker on and off. It also starts or pauses playback of Bluetooth audio. MASTER VOLUME dial adjusts the Singsation Classic’s volume. LIGHTING button controls the speaker’s multi-mode lighting. Press to cycle through the light modes. PAIR button re-connects to the last Bluetooth source (single press) or starts the Bluetooth pairing process (double press). COLOR button changes the color of the light in light modes where you can select color. ECHO button adds an echo effect to your voice. The echo effect has three levels— low, mid, max. Press the ECHO button repeatedly to increase the effect. The fourth press turns the effect off. VOICE FX button cycles through the available voice effects. MIC 1 VOLUME and MIC 2 VOLUME dials adjust the volume of MIC 1 IN and MIC 2 IN. MIC 1 IN and MIC 2 IN jacks let you connect up to two microphones (including the provided mic) to use with the speaker, for karaoke or announcements. AUX IN jack (back, not shown) lets you connect to an external audio device with a 3.5mm audio cabl…

Text truncated - open the document above for the full version.

Date: 2020-9-01 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: VIXSPKA30Q To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Voxx Accessories Corp. This authorization is valid until further written notice from the applicant. Print Name: Paul Tinaphong Title: VP engineering Signature: On behalf of Company: Voxx Accessories Corp. Telephone: (317) 218-7301 E-mail: [email protected]

Date: 2020-9-01 To: Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Regarding: Confidentiality Request regarding application for FCC ID: VIXSPKA30Q LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Print Name: Paul Tinaphong Title: VP engineering Signature: On behalf of Company: Voxx Accessories Corp. Telephone: (317)218-7301 E-mail: [email protected]

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Voxx Accessories Corp. Address 3502 Woodview Trace, Suite 220, Indianapolis, Indiana 46268, United States Grantee Code VIX FCC ID VIXSPKA30Q Authorized Contact Name Paul Tinaphong Contact Email [email protected] Contact Phone (317)218-7301 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 2020-9-01 Print Name: Paul Tinaphong Title: VP engineering *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 7 External Photos for SZEM2008008500CR FCC ID: VIXSPKA30Q SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 7 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 7 of 7

A20090 SPKA30Q Rating Made in China CAN ICES-3 (B)/NMB-3 (B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. SN Label 28*5mm Embossed (Tooling insert) Model: SPKA30Q Input: 15V 1A FCC ID: VIXSPKA30Q IC: 21578-SPKA30Q Karaoke System with Bluetooth

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 6 Internal Photos for SZEM2008008500CR FCC ID: VIXSPKA30Q SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 6 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 6

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800850003 Page: 1 of 6 Keny Xu EMC Laboratory Manager 1 Cover page SAR Evaluation Report Application No.: SZEM2008008500CR Applicant: Voxx Accessories Corp Address of Applicant: 3502 Woodview Trace, Suite 220, Indianapolis, IN 46268 Manufacturer: Voxx Accessories Corp Address of Manufacturer: 3502 Woodview Trace, Suite 220, Indianapolis, IN 46268 Factory: Shenzhen Great Power Innovation and Technology Enterprise Co., Ltd Address of Factory: No. 331, No. 335, Guiyue Road, Dafu Community, Guanlan Street, Longhua District, Shenzhen, China Equipment Under Test (EUT): EUT Name: Karaoke System with Bluetooth Model No.: SPKA30Q Trade mark: SINGSATION FCC ID: VIXSPKA30Q Standards: 47 CFR Part 1.1307 47 CFR Part 2.1093 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2020-08-27 Date of Test: 2020-08-27 to 2020-09-03 Date of Issue: 2020-09-05 Test Result : Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800850003 Page: 2 of 6 2 Version Revision Record Version Chapter Date Modifier Remark 01 2020-09-05 Original Authorized for issue by: Bill Chen/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800850003 Page: 3 of 6 3 Contents Page 1 COVER PAGE .............................................................................................................................................. 1 2 VERSION ...................................................................................................................................................... 2 3 CONTENTS .................................................................................................................................................. 3 4 GENERAL INFORMATION .......................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF EUT ............................................................................................................. 4 4.2 TEST LOCATION ...................................................................................................................................... 5 4.3 TEST FACILITY ........................................................................................................................................ 5 4.4 DEVIATION FROM STANDARDS ................................................................................................................. 5 4.5 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................... 5 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER ............................................................................. 5 5 SAR EVALUATION ...................................................................................................................................... 6 5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ............................................................................................ 6 5.1.1 Standard Requirement ..................................................................................................................... 6 5.1.2 Limits ................................................................................................................................................ 6 5.1.3 EUT RF Exposure ............................................................................................................................ 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800850003 Page: 4 of 6 4 General Information 4.1 General Description of EUT Power adapter: AC adapter: Model:K15V150100U Input:AC 100-240V 50/60Hz 0.45A Output:DC 15.0V 1.0A Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.0 Classic Spectrum Spread Technology: Frequency Hopping Spread Spectrum(FHSS) Modulation Type: GFSK, Pi/4DQPSK, 8DPSK Number of Channels: 79 Channel Spacing: 1MHz Antenna Type: PCB Antenna Gain: 0dBi SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800850003 Page: 5 of 6 4.2 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. 4.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C. 4.4 Deviation from Standards None. 4.5 Abnormalities from Standard Conditions None. 4.6 Other Information Requested by the Customer None. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch R…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800850002 Page: 1 of 88 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZEM2008008500CR Applicant: Voxx Accessories Corp Address of Applicant: 3502 Woodview Trace, Suite 220, Indianapolis, IN 46268 Manufacturer: Voxx Accessories Corp Address of Manufacturer: 3502 Woodview Trace, Suite 220, Indianapolis, IN 46268 Factory: Shenzhen Great Power Innovation and Technology Enterprise Co., Ltd Address of Factory: No. 331, No. 335, Guiyue Road, Dafu Community, Guanlan Street, Longhua District, Shenzhen, China Equipment Under Test (EUT): EUT Name: Karaoke System with Bluetooth Model No.: SPKA30Q Trade Mark: SINGSATION FCC ID: VIXSPKA30Q Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2020-08-27 Date of Test: 2020-08-27 to 2020-09-03 Date of Issue: 2020-09-05 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800850002 Page: 2 of 88 Revision Record Version Chapter Date Modifier Remark 01 2020-09-05 Original Authorized for issue by: Bill Chen/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800850002 Page: 3 of 88 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.247(a)(1),(g),(h) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.5 47 CFR Part 15, Subpart C 15.247(b)(1) Pass 20dB Bandwidth 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.7 47 CFR Part 15, Subpart C 15.247(a)(1) Pass Carrier Frequencies Separation 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.2 47 CFR Part 15, Subpart C 15.247a(1) Pass Hopping Channel Number 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.3 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Dwell Time 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.4 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.6 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.8 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Emission Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800850002 Page: 4 of 88 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ....................................................................................................................................... 3 3 CONTENTS ................................................................................................................................................ 4 4 GENERAL INFORMATION ........................................................................................................................ 6 4.1 DETAILS OF E.U.T. ............................................................................................................................... 6 4.2 CABLE ................................................................................................................................................. 7 4.3 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 7 4.4 MEASUREMENT UNCERTAINTY .............................................................................................................. 7 4.5 TEST LOCATION .................................................................................................................................... 8 4.6 TEST FACILITY .........................................................................…

Text truncated - open the document above for the full version.