VL5-PF302BLUE ROCK-USB PORT

User Manual Model Name: PF302 General Speaker Setup & Pairing: ‐ Select a BT 2.0 or above device (mobile phone or music player) for pairing. ‐ Turn on the Main Power Switch of PF302 at the back. Remark: Make sure your PF302 has been fully charged. ‐ Activate your BT device to the searching mode (new device searching). ‐ Press and hold “Stand-by or Phone & Phone” key at the side of PF302 till the flashing of BLUE/RED LED, PF302 will have 3mins (searchable time) for your BT device to pair with. ‐ <<Plastoform PF302>> will be displayed in your BT device. Please select it for pairing. “0000” is the pairing code if necessary. ‐ PF302 will stop flashing & with a sound effect to specify it is paired with the BT device. Remark: Pairing steps are for 1 st time connection, simple steps could be done by either PF302 or your BT device in future use. ‐ Double check with your BT device to see PF302 is connected. Remark: PF302 will also stop flashing with another sound effect to specify pairing failure after the 3mins. Repeat from the activation of your BT device to try again the pairing with PF302. Connection & Operation (Music) Instruction: ‐ Turn on the Main Power Switch of PF302 at the back. ‐ To Power up the unit: Press “Stand-by or Phone” key at the side of PF302 till BLUE LED is on Remark: Make sure PF302 has been fully charged & the Main Power Switch is on ‐ Turn on your BT device and select the connection w/ <<Plastoform PF302>> ‐ Play & Pause Music: Press “Stand-by or Phone” key at the side ‐ To play Next song: Press “>>|” key at the side ‐ To play Previous song: Press “|<<” key at the side ‐ To Fast Forward: Press & hold “>>|” key at the side ‐ To Rewind: Press & hold “|<<” key at the side ‐ To adjust the Volume: Adjust the volume level either in PF302 or your BT device ‐ To Power down the unit: Press the Stand-by or Phone key at the side of PF302 till BLUE LED is off Remark: If HFP/HSP is available in your BT mobile ONLY (No A2DP), such as iPhone 2G, PF302 could perform as a speaker phone. Operation (Speaker Phone) Instruction: ‐ To Answer a call: Press Any Key at the side ‐ To Reject a call: Press & hold “Stand-by or Phone” key at the side ‐ To Hang-up a call: Press “Stand-by or Phone” key at the side ‐ To Switch the call in between PF302 & mobile: Press & hold “Stand-by or Phone” key at the side ‐ To Answer Call Waiting (3 rd Party): Double Press “Stand-by or Phone” key at the side ‐ To Toggle in between 3 rd Party/Original call: Double Press “Stand-by or Phone” key at the side ‐ To Redial Last Calling number: Double Press “Stand-by or Phone” key at the side Remark: PF302 could perform as a speaker phone, ONLY HFP/HSP is available in your BT mobile, Battery Recharge & Firmware Upgrade Instruction: ‐ PF302 could be recharged in any status by USB power (thru the provided USB cable from PC; or from USB adaptor “Not included”) ‐ PF302 firmware upgrade is available thru USB cable from PC LED indicator (on the Speaker): ‐ LED Off – Power OFF ‐ BLUE LED ON – Power ON ‐ Flashing of BLUE/RED LED – Pairing mode ‐ RED LED ON – Low Battery Level ‐ Flashing of RED LED – Almost No Power ‐ Flashing of BLUE LED – Battery is Recharging Remark: No LED indication if Main Power Switch-off at the back Specification: ‐ Total 6W output (3W / Channel) ‐ Full-range (35mm) driver / Channel + Passive Radiator ‐ Distortion <= 10 % ‐ S/N ratio:>75dB@1W ‐ Frequency Response: 200Hz – 15k Hz ‐ Li—polymer Batt: 1150mAh ‐ Playtime: 5hours in 80% Volume ‐ Recharging Time: 3hours ‐ (Optional) Power Adaptor: 5VDC @ 500mA Compatibility (Bluetooth device) ‐ BT 2.0 or above device with A2DP/AVRCP/ HFP/ HSP Trouble Shooting: Sound not Clear or no sound ‐ Please check PF302 or BT device Volume Level Playing Music Not Transfer from BT device to PF302 ‐ Make sure your BT device has A2DP ‐ Check if both devices are connected ‐ Restart PF302 for auto-connecting with your BT device LED No Power ‐ Make sure PF302 Main Switch is ON ‐ Make sure PF302 is charged. Sound is Too small / too much distortion ‐ Adjust the volume level of PF302 or BT device Phone call Not Answer by PF302 ‐ Make sure your mobile has HSP/HFP ‐ Check if both devices are connected ‐ Restart PF302 for auto-connecting with your BT device No Music Resume after hanging up a call ‐ Press play to resume music No Music Control by PF302 ‐ Make sure your BT device has AVRCP This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between t…

Text truncated - open the document above for the full version.

Plastoform Industries Ltd. FCC ID: VL5-PF302 POWER OF ATTORNEY March 23, 2010 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, Plastoform Industries Ltd. hereby authorize Most Technology Service Co., Ltd. (Terry YANG/ Manager) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Most Technology Service Co., Ltd. (Terry YANG/ Manager) on our behalf shall have the same effect as acts of our own. This authorization expires on May 28, 2010. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Plastoform Industries Ltd. are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Name: Winny Mark Title: Manager Date: March 23, 2010

FRONT VIEW OF SAMPLE BACK VIEW OF SAMPLE LEFT VIEW OF SAMPLE RIGHT VIEW OF SAMPLE TOP VIEW OF SAMPLE BOTTOM VIEW OF SAMPLE PHOTO OF POWER SUPPLY PHOTO OF USB CABLE

INTERNAL PHOTO OF SAMPLE – 1 INTERNAL PHOTO OF SAMPLE – 2 INTERNAL PHOTO OF SAMPLE – 3 INTERNAL PHOTO OF SAMPLE – 4 INTERNAL PHOTO OF SAMPLE – 5 INTERNAL PHOTO OF SAMPLE – 6 INTERNAL PHOTO OF SAMPLE – 7

Operatrion Description of the Bluetooth Speaker PF302 1. BTP501 is a module for Bluetooth 2.4GHz. 16Mbit of internal Flash memory.When used with CSR Bluetooth stack. It provides a fully compliant Bluetooth system to V2.1+ECR of the specification for data and voice. 2. U1 use for charging Li-ion battery(3.7V) , input USB DC5V. 3. U4 is Class D amplifier, used for drive the speaker. 4. U3 is OP. Used for analog audio amplifier. 5. U5 is LDO (3.3V) power supply Bluetooth module. 6. U2 is used for step up DC to DC(3.7V to 5V). Power supply U3,U4 and U6. 7. Q1,Q2,Q3,Q4 is used for power switch, Q1 controlle L-in to mute,Q2 controlle power suplly MIC,Q3 and Q4 controlle power LED. PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn

Tune Up Description Product Blue Rock Trade Name N/A Model Number PF302 Power Supply DC 5.0 V by USB Port or by Adapter Frequency Range 2402 MHz -2480MHz Modulation Type FHSS Channel Number 79 Channel Spacing 1 MHz Temperature Range -20°C ~ 55°C

12345678 A B C D 87654321 D C B A Title NumberRevisionSize A3 Date:29-Jan-2010Sheet of File:D:\hong.file\PF302\pcb\PF302.DDBDrawn By: IN-L- R2a 1k C2a 203 C3a 203 R3a 10k C1a 1uF IN-L- R1b 4.3k R2b 1k C2b 203 C3b 203 R3b 10k C1b 1uF IN-R+ R1a 4.3k L1a 300R 100M L2a 300R 100M L2b 300R 100M L1b 300R 100M C2 10uF C1 1uF C5 104 C3 10uF C4 1uF C6 1uF C10a 221 C8a 101 C9a 221 C10b 221 C8b 101 C9b 221 -OUT_L +OUT_L +OUT_R -OUT_R LI-ION 3.7V L2 600R 100M L3a 600R 100M L3b 600R 100M C7a 101 C7b 101 A 1 B 2 C 3 D 4 E 5 J2 PHONEJACK STEREO SW C4a 333 C4b 333 COMP 1 FB 2 /SHDN 3 GND 4 LX 5 IN 6 FREQ 7 SS 8 U2 AP2624 L1 10uH C11 10uF R3 137k R4 43k C12 104 C13 104 D2 SS24 C9 104 C10 10uF C15 102 C14 333 C16 47pF R2 120k +5V +5V +5V +5V +5V VIN 1 /FAST 6 /EN 4 GND 5 /ISET 7 /CHG 3 /PPR 2 BAT 8 U1 SC34671 C7 105 R1 5.23k C8 2.2uF C2310uF R20 200k 1% R21 100k 1% S2 PRE S3 NEXT S5 VOL+ S4 VOL- 3.3V 3.3V R16 47k R17 47k R18 47k R19 47k L3 6.8uH C33 NC S1 ON/OFF R14 47k R12 47k R13 47k R15 47k D4 4148 C22 NC EN V+ 1 D- 2 GND 4 SG 5 D+ 3 J1 USB BAT BAT BAT BAT 5 6 7 U3B 2308 C13a 101 R8a 10k R6a 5.1k R7a 5.1k C11a 10uF C12a 10uF R9a10k 1/2Vcc R6 10k R7 10k 1/2Vcc C17 10uF IN-L+ IN-L+ IN-R- IN-R+ IN-R- IN-L 3 2 1 U3A 2308 C13b 101 R8b 10k R6b 5.1k R7b 5.1k C11b 10uF C12b 10uF R9b 10k 1/2Vcc IN-R PIO3 4 8 U3C 2308 C19 10uF C18 105 BAT POWER AMP BLUETOOTH R28 100 PIO4 BAT R29 10k C20 104 PIO4 Q1 2712 1 ANT 2 2 1 1 3 3 SW1 POWER ON/OFF Y0 1 Y2 2 Y 3 Y3 4 Y1 5 INH 6 VEE 7 VSS 8 B 9 A 10 X3 11 X0 12 X 13 X1 14 X2 15 VDD 16 U6 UTC4052 C32 104 C14a 105 C14b 105 C15a 105 C15b105 IN-R IN-L PIO2 PIO2 R8 680 CE1 220uF 10V Vin 1 Vss 2 Vout 5 EN 3 NC 4 U5 XC6204 EN MIC- PIO2 123456789101112 CON2 IN-L- IN-R+ IN-L+ IN-R- MIC+ 3.3V BAT C30 223 C29 102 P 1 N 2 MIC1 MIC-2 C21 223 R25 1k R26 1k C28 331 R23 2.2k R24 1k C24 105 R22 10k 3.3V C25 10uF C26 104 C27 7pF PIO0 D5 4148 Q2 2712 PIO0 12345678910 CON3 PIO1PIO5PIO6PIO7 ON/OFF2 BAT R27 100k 3.3V PIO3PIO0 MIC- MIC+ PIO2 123456789101112 CON1 IN-L- IN-R+ IN-L+ IN-R- 3.3V BAT MIC- MIC+ 123456789 101112 CON5 123456789101112 CON6 ON/OFF1 PIO1 PIO5 PIO6 PIO7 ON/OFF1 ON/OFF2 ON/OFF1 ON/OFF2 12345678910 CON4 PIO1PIO5PIO6PIO7 BAT ON/OFF1ON/OFF2 3.3V 3.3V EN EN AMP SD AMP SD R31 170k D1 4148 D3 4148 EN R30 330k R4a 24k R4b 24k R34 1k R10 2.2k 2 2 1 1 3 3 LED2 2 2 1 1 3 3 LED1 S6 ON/OFF -OUT_L 1 +OUT_L 4 INL 8 VDC 10 MUTE 6 SHDN 19 NC 9 Volume 11 NC 12 NC 16 PGND 22 PVCC 20 PGND 23 NC 13 VREF 14 NC 15 INR 17 -OUT_R 24 +OUT_R 21 PGND 3 PGND 2 PVCC 5 GND 18 VDD 7 U4 PAM8603 +5V Q3 2712 R35 47k Q4 2712 R36 47k SPK L- 1 SPK L+ 2 SPK R- 3 SPK R+ 4 GND 5 MIC L+ 6 MIC L- 7 MIC R+ 8 MIC R- 9 1.8V 10 PCM-IN 11 PCM-SYNC 12 PCM-CLK 13 PCM-OUT 14 AIO0 15 AIO1 16 GND 18 3.3V 19 USB D+ 20 USB D- 21 RTS 22 CTS 23 TX 24 RX 25 RESE 26 PIO15 17 PIO4 28 PIO5 29 PIO6 30 PIO7 31 MOSI 32 CSB 33 CLK 34 MISO 35 PIO10 36 PIO11 37 PIO3 38 PIO2 39 PIO1 40 PIO0 41 PIO8 42 PIO9 43 GND 44 GND 45 ANT 46 GND 47 BT1 PF-BTP501 D+ D- D+ D- R33 24 R5 24 D+ D- D+ D- C34 104 C35 10uF L4 600R 100M L5 600R 100M L6 600R 100M L7 600R 100M C36 104 L8 600R 100M L9 600R 100M L10 600R 100M OP OP OP BAT PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn

PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn

FCC 47 CFR PART 15 SUBPART B TEST REPORT For Applicant : Plastoform Industries Ltd. Address : Unit 6A-12, 15/F Mita Center, 552-566 Castle Peak Road, Kwai Chuang, N.T., Hong Kong Product Name : Blue Rock Model Name : PF302, BT010 Brand Name : N/A FCC ID : VL5-PF302 Report No. : MOST/STS100109F2 Date of Issue : March 24, 2010 Issued by :Most Technology Service Co., Ltd. Address : No.5, 2nd Langshan Road, North District, Hi-tech Industrial Park, Nanshan, Shenzhen, Guangdong, China Tel : 86-755-8617 0306 Fax : 86-755-8617 0310 The report consists 30 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by MOST. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. FCC ID: VL5-PF302 Report No.: MOST/STS100109F2 Page 2 of 30 TABLE OF CONTENTS 1．VERIFICATION OF CONFORMITY .............................................................................................................. 3 2. GENERAL INFORMATION ............................................................................................................................ 4 2.1 PRODUCT INFORMATION .......................................................................................................................... 4 2.2 OBJECTIVE ................................................................................................................................................. 4 2.3 TEST STANDARDS AND RESULTS ............................................................................................................ 4 2.4 ENVIRONMENTAL CONDITIONS ............................................................................................................... 5 2.5 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 3. TEST METHODOLOGY ................................................................................................................................. 6 3. 1TEST FACILITY............................................................................................................................................ 6 3.2 GENERAL TEST PROCEDURES ................................................................................................................ 6 3.3 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS..................................................................... 7 4 SETUP OF EQUIPMENT UNDER TEST ........................................................................................................ 8 4.1 SETUP CONFIGURATION OF EUT............................................................................................................. 8 4.2 SUPPORT EQUIPMENT.............................................................................................................................. 8 4. 3 TEST EQUIPMENT LIST ............................................................................................................................ 9 5. 47 CFR PART 15B REQUIREMENTS ....................................................................................................... 10 5.1 GENERAL INFORMATION......................................................................................................................... 10 6. LINE CONDUCTED EMISSION TEST .......................................................................................................11 6.1. LIMITS OF LINE CONDUCTED EMISSION TEST ....................................................................................11 6.2. BLOCK DIAGRAM OF TEST SETUP.........................................................................................................11 6.3. PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST ............................................... 12 6.4. FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST ............................................................. 12 6.5. TEST RESULT OF LINE CONDUCTED EMISSION TEST ....................................................................... 13 7. RADIATED EMISSION TEST .................................................................................................................... 15 7.1. LIMITS OF RADIATED DISTURBANCES AT 3M DISTANCES FOR CLASS B ........................................ 15 7.2 TEST DESCRIPTION................................................................................................................................. 15 7.3 TEST RESULT ........................................................................................................................................... 17 APPENDIX 1 .................................................................................................................................................... 18 PHOTOGRAPHS OF TEST SETUP................................................................................................................. 18 APPENDIX 2 .................................................................................................................................................... 20 PHOTOGRAPHS OF EUT ............................................................................................................. .................. 20 FCC ID: VL5-PF302 Report No.: MOST/STS100109F2 Page 3 of 34 1．VERIFICATION OF CONFORMITY Equipment Under Test: Blue Rock Brand Name: N/A Model Number: PF302 Series Number: BT010 Model Difference description: Only the market name is different FCC ID： VL5-PF302 Plastoform Industries Ltd. Applicant: Unit 6A-12, 15/F Mita Center, 552-566 Castle Peak Road, Kwai Chuang, N.T., Hong Kong Plastoform Industries Ltd. Manufacturer: Building No.16,19,21,28,29, B zone, The 1 st Industrial Zone, Gonghe Community, Shajing Street,…

Text truncated - open the document above for the full version.

FCC 47 CFR PART 15 SUBPART C TEST REPORT For Applicant : Plastoform Industries Ltd. Address : Unit 6A-12, 15/F Mita Center, 552-566 Castle Peak Road, Kwai Chuang, N.T., Hong Kong Product Name : Blue Rock Model Name : PF302, BT010 Brand Name : N/A FCC ID : VL5-PF302 Report No. : MOST/STS100109F1 Date of Issue : March 24, 2010 Issued by :Most Technology Service Co., Ltd. Address : No.5, 2nd Langshan Road, North District, Hi-tech Industrial Park, Nanshan, Shenzhen, Guangdong, China Tel : 86-755-8617 0306 Fax : 86-755-8617 0310 The report consists 35 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by MOST. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. FCC ID: VL5-PF302 Report No.: MOST/STS100109F1 Page 2 of 35 TABLE OF CONTENTS 1．VERIFICATION OF CONFORMITY .............................................................................................................. 3 2. GENERAL INFORMATION ............................................................................................................................ 4 2.1 Product Information ...................................................................................................................................... 4 2.2 Objective ...................................................................................................................................................... 5 2.3 Test Standards and Results .......................................................................................................................... 5 2.4 Environmental Conditions............................................................................................................................. 5 3. TEST FACILITY.............................................................................................................................................. 6 3.1TEST FACILITY............................................................................................................................................. 6 3.2 GENERAL TEST PROCEDURES ................................................................................................................ 6 3.3 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS..................................................................... 7 4. SETUP OF EQUIPMENT UNDER TEST ....................................................................................................... 8 4.1 SUPPORT EQUIPMENT.............................................................................................................................. 8 4.2 TEST EQUIPMENT LIST ............................................................................................................................. 9 5. 47 CFR Part 15C 15.249 Requirements....................................................................................................... 10 5.1 Spurious Emission Test .............................................................................................................................. 10 5.1.1 Requirement............................................................................................................................................ 10 5.1.2 Test Description ........................................................................................................................................11 5.1.3 Test Description ....................................................................................................................................... 12 5.1.4 Test Result............................................................................................................................................... 13 5.2 Band Edge ................................................................................................................................................. 19 5.2.1 Requirement............................................................................................................................................ 19 5.2.2 Test Description ....................................................................................................................................... 19 5.2.3Test Result................................................................................................................................................ 19 5.3 Power Line Conducted Emission Test ........................................................................................................ 21 5.3.1 Limits of Line Conducted Emission Test .................................................................................................. 21 5.3.2 BLOCK DIAGRAM OF TEST SETUP...................................................................................................... 21 5.3.3 PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST ............................................. 22 5.3.4 FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST ........................................................... 22 5.3.5 TEST RESULT OF LINE CONDUCTED EMISSION TEST ..................................................................... 23 APPENDIX 1 .................................................................................................................................................... 25 PHOTOGRAPHS OF TEST SETUP................................................................................................................. 25 APPENDIX 2 .................................................................................................................................................... 27 PHOTOGRAPHS OF EUT ..................................................................................................................…

Text truncated - open the document above for the full version.

RADIATED EMISSION TEST CONDUCTED EMISSION TEST