VQ7TM20-B-QQNFC Reader/Writer Module

TM20-B/QQ GL Solutions Inc. JAPAN NFC Reader/Writer Product Specification Ver1.00 Model:TM20-B/QQ Automatic Recognition Business Division JUNE 2020 Technology Headquarters Approved by Checked by Prepared by TM20-B/QQ GL Solutions Inc. JAPAN Request All rights reserved. No part of this document may be copied or reproduced without the expressed written permission of GL Solutions Inc. Japan. The contents of this document are subject to future changes. We have made eery effort to ensure the contents of this document . However, please contact us if you find any unclear points, errors or omissions. Please contact us by the fax number shown elow. Please note that we should not be held liable for results from your operating the product. FAX:+81-3(3862)5255 TM20-B/QQ GL Solutions Inc. JAPAN Change historiy Section Date Ver. Change description 1 JUN 28,2020 1.00 Prepared the first edition. TM20-B/QQ GL Solutions Inc. JAPAN Contents Overview ···································································· 1 General Specifications ······················································· 2 Names and functions of each part ············································· 3 3.1. Front Side ································································ 3 3.2. Back Side ································································· 3 Functional descriptions ······················································ 4 4.1. Configuration diagram ······················································ 4 Connection with external control device ······································ 5 5.1. Connector(CN1) to connect external control device ·························· 5 5.2. I/O Interface ····························································· 5 Handling precautions ························································· 6 12. External appearance ························································· 9 TM20-B/QQ GL solutions Inc. JAPAN Overview The NFC Reader/Writer “TM20-B/QQ”(hereinafer called “this equipment” or “Reader/Writer”) is a reader/writer to read the serial number(alled “tag ID” unless otherwise specified) of an ISO15693 tag or card (called “tag”) and read and write data in the tag. ・Extaernal control equipment such as a PC can control this equipment via RS-232C. ・It is reader/writer to read and write data in a tag within the access area of the antenna built into this equipment. Features of thes equipment include ・Compact and lightweigh, equipment-integrated (antenna- integrated) type. ・Compactible with IcodeSLIX tags. ・The power supply voltage is DC5V±10% input. ・Connected to an external control device by serial communication (RS-232C). ・Lead free ad RoHS Directivecompliant. For details of the communication specifications between tis equipment and an exernal control device, please refer to the “NFC Reader/Writer Communication Specification. TM20-B/QQ GL solutions Inc. JAPAN General Specifications Item Specification Unit Rated input voltage DC5V±10% V Power supply noise 13.56MHz for sinusoidal components, not containing the harmonic components - Maximum consumption current 250(RF ON) mA Average consumption current (reference value) 50(RF OFF) mA Operationg frequency 13.56 MHz Modulation method ASK - Access distance(Note1) 25 mm Operating temperature ange 0 – 50 °C Operating humidity range 30 – 85 (Non-condensing) %RH Storage temperature range -20 – 75 (Non-condensing) °C Storage humidity range 5 – 95 (Non-condensing) %RH Outside dimensions 40(W)x35(D)x13(H) mm Interface RS-232C - Communication speed 9600 bps Connection connector For external control device:S4B-EH - [note] Measurement is performed using the ICODE SLIX tag in an environment of normal temperature and bumidiy. For an electromagnetic field near 13.56MHz, the distance is redusec if the nise increases. TM20-B/QQ GL solutions Inc. JAPAN Names and functions of each part 3.1. Front Side 1)Shielding case 1)Shielding case Covers to protect an electronic circuit 3.2. Back Side 2)Connector for external control 3)Antenna substrate 2)Connector for external control device Connector to connect an external control device 3)Antenna substrate Antenna part to communicate with a tag Do not touch it with bare hands TM20-B/QQ GL solutions Inc. JAPAN Functional descriptions 4.1. Configuration diagram This specification is applied To external control device Power input(DC5V±10%) Antenna part RF part Control part (Setting storage) Serial I/F CN1 TM20-B/QQ GL solutions Inc. JAPAN Connection with external control device 5.1. Connector(CN1) to connect external control device 1)Connection with external control device CN1 use connector;S4B-EH(manufactured by JST) Terminal No. Signal name I/O Function 1 VCC - Power 2 TxD O Transmitted data from Reader/Writer 3 RxD I Received data from Reader/Writer 4 GND - Ground 5.2. I/O Interface 1)RS-232C CN1 2 TxD 3 RxD Max232 equivalent Reader/Writer Slave station RS-232C DC5V±10% External control device DC power supply Control station TM20-B/QQ GL solutions Inc. JAPAN Handling precautions When using the Reader/Writer and a card, please note the precautions shown below. Make sure to follow them since misuse may cause an abnormal operation, leading to a product failure. Please note that we shall not be held liable for any incidental damage that occurs to the recorded contents of the Reader/Writer due to its failure, malfunction or defect. Before use Please describe the follon items in the Instruction Manual or Delivery Specification, etc., for the deviCe with this Reader/Writer built in: 1) This device includes the communication equipment which uses a radio fiequency of 13.56. MHz, 3 generally available ISM bandwidth. Therefore, interference may occur depending on the use application or place. In order to reduce the effect due to this interference, it is requested to mutually perform an advanced check before introducing this device. Please pay special attention to use in such an environment since it may affect radio as…

Text truncated - open the document above for the full version.

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name GL Solutions Inc. Address Tokyo Kabankaikan Bldg., 4-16-3 Kuramae, Taito-ku Grantee Code VQ7 FCC ID VQ7TM20-B-QQ Authorized Contact Name Yasushi Noguchi Contact Email [email protected] Contact Phone +81-3(3862)6600 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: July 9, 2020 Print Name: Yasushi Noguchi Title: R&D Section *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Date: July 9, 2020 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: VQ7TM20-B-QQ To whom it may concern: We, the undersigned, hereby authorize SGS Taiwan Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with << GL Solutions Inc. >>. This authorization is valid until further written notice from the applicant. Name (Printed): Yasushi Noguchi Title: R&D Section Signature: On behalf of Company: GL Solutions Inc. Telephone: +81-3-3862-6600

To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: GL Solutions Inc. Tokyo Kabankaikan Bldg., 4-16-3 Kuramae, Taito-ku Tokyo, 111-0051 Japan Regarding: Confidentiality Request regarding application for FCC ID VQ7TM20-B-QQ LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Parts List The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Signature: Yasushi Noguchi (on file with the FCC associated with the Grantee Code) R&D Sectionr GL Solutions Inc.

Cover Letter-Modular Approval FCC ID: VQ7TM20-B-QQ Date: August 13, 2020 Gentlemen: There’s a NFC Reader/Writer Module that would like to have your authorization as a modular approval. The specific product as below, NFC Reader/Writer Module with its designed features and specified description, meets special requirements for Full modular approval on FCC KDB996369 by cross-reference list below. Company: GL Solutions Inc. Product Name: NFC Reader/Writer Module Model Number: TM20-B/QQ FCC ID: VQ7TM20-B-QQ Requirement of FCC KDB996369 Comply（Y/N） 1. The modular transmitter must have its own RF shielding. Y The EUT provides the RF shielding. See EUT photo. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. Y The EUT has its buffered modulation. Please see the Schematic Diagram. 3. The modular transmitter must have its own power supply regulation. Y The EUT has its own power supply regulation, please see the Schematic Diagram. 4. The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. Y The EUT meets the FCC antenna requirements. The EUT is designed with permanently attached antenna. Please see the photo of EUT in the exhibition. 5. The modular transmitter must be tested in a stand‐alone configuration, i.e., the module must not be inside another device Y The EUT was tested with a test board, Please see test report and setup photo during testing. 6. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: VQ7TM20-B-QQ or “Contains FCC ID: VQ7TM20-B-QQ” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. Y Please see exhibition label sample for the FCC ID of this module. And also in the exhibition Users manual, there are instructions give to the OEM on how to label the end product. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. Y The EUT is compliant with all applicable FCC rules. Details instructions for maintaining compliance are given in the User Manual. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating Y The EUT complies with RF exposure requirement. under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Thank you. Sincerely, By: __________________________ Yasushi Noguchi (Signature 1 ) (Print name) Title: R&D Section On behalf of: GL Solutions Inc. (Company Name) Telephone: +81-3-3862-6600

EUT Photo No.:E2-2020-60044-P Page: 1 of 3 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90 天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible athttp://www.sgs.com.tw/Terms-and-Conditionsand for electronic format documents, subject to Terms and Conditions for Electronic Documents athttp://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnifica- tion and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司t (886-2) 2299-3279f (886-2) 2298-0488www.tw.sgs.com Member of SGS Group EXTERNAL PHOTOGRAPHS OF EUT Front View of EUT Back View of EUT EUT Photo No.:E2-2020-60044-P Page: 2 of 3 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90 天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible athttp://www.sgs.com.tw/Terms-and-Conditionsand for electronic format documents, subject to Terms and Conditions for Electronic Documents athttp://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnifica- tion and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司t (886-2) 2299-3279f (886-2) 2298-0488www.tw.sgs.com Member of SGS Group Side View of EUT – 1 Side View of EUT – 2 EUT Photo No.:E2-2020-60044-P Page: 3 of 3 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90 天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible athttp://www.sgs.com.tw/Terms-and-Conditionsand for electronic format documents, subject to Terms and Conditions for Electronic Documents athttp://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnifica- tion and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司t (886-2) 2299-3279f (886-2) 2298-0488www.tw.sgs.com Member of SGS Group Side View of EUT – 3 Side View of EUT – 4

Label & Location Front Side The device designed for style aesthetics with a specific label area and has no enough space to have the statement of Part 15.9(a) affixed on the product. Hence the statement of Part 15.9(a) is placed in user’s manual.

EUT Photo No.:E2-2020-60044-P Page: 1 of 2 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90 天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible athttp://www.sgs.com.tw/Terms-and-Conditionsand for electronic format documents, subject to Terms and Conditions for Electronic Documents athttp://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnifica- tion and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司t (886-2) 2299-3279f (886-2) 2298-0488www.tw.sgs.com Member of SGS Group INTERNAL PHOTOGRAPHS OF EUT Open View of EUT – 1 Internal View of EUT – 1 EUT Photo No.:E2-2020-60044-P Page: 2 of 2 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90 天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible athttp://www.sgs.com.tw/Terms-and-Conditionsand for electronic format documents, subject to Terms and Conditions for Electronic Documents athttp://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnifica- tion and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司t (886-2) 2299-3279f (886-2) 2298-0488www.tw.sgs.com Member of SGS Group RF IC Antenna

Report No: E2/2020/60044 Page: 1 of 33 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90 天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible athttp://www.sgs.com.tw/Terms-and-Conditionsand for electronic format documents, subject to Terms and Conditions for Electronic Documents athttp://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134 號 台灣檢驗科技股份有限公司t (886-2) 2299-3279f (886-2) 2298-0488www.sgs.com.tw Member of SGS Group ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT Applicant: GL Solutions Inc. 16-3 Kuramae 4-chome,Taito-ku,Tokyo,111-0051 JAPAN Product Name: NFC Reader/Writer Module Brand Name: GL Solutions Model No.: TM20-B/QQ Model Difference: N/A Report Number: E2/2020/60044 FCC ID VQ7TM20-B-QQ IC: 10795A-TM20BQQ FCC Rule Part Part 15.225 IC Rule: RSS-210 issue 10 Annex B B.6 Dec. 2019 Issue Date: Aug. 13, 2020 Date of Test: Jun. 23, 2020 ~ Jul. 10, 2020 Date of EUT Received: Jun. 23, 2020 We hereby certify that: The above equipment was tested by SGS Taiwan Ltd.Central RF Lab.The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10:2013 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits. The test results of this report relate only to the tested sample identified in this report. Approved By: Jazz Huang / Asst. Supervisor Report No: E2/2020/60044 Page: 2 of 33 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90 天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible athttp://www.sgs.com.tw/Terms-and-Conditionsand for electronic format documents, subject to Terms and Conditions for Electronic Documents athttp://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134 號 台灣檢驗科技股份有限公司t (886-2) 2299-3279f (886-2) 2298-0488www.sgs.com.tw Member of SGS Group Revision History Report NumberRevisionDescriptionIssue DateRemark E2/2020/60044Rev.00Original.Aug. 13, 2020 Revised By: Stefanie Yu Note: 1、Disclaimer Antenna information is provided by the applicant, test results of this report are applicable to the sample EUT received. Report No: E2/2020/60044 Page: 3 of 33 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90 天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible athttp://www.sgs.com.tw/Terms-and-Conditionsand for electronic format documents, subject to Terms and Conditions for Electronic Documents athttp://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134 號 台灣…

Text truncated - open the document above for the full version.