VW3FAST4350WIRELESS XDSL ROUTER

Safety and Certifications Ref : 253584089 09/01/2014 1 Important Information about the Sagemcom FAST4350: Installation and Safe Usage Instructions: 1. Place the VDSL router in a vertical orientation on a flat surface. 2. Connect the manufacturer supplied AC to DC power adapter. The FAST4350 router requires the use of a 12 VDC, 2000 mA power adapter. Only use a manufacturer supplied and approved power adapter. 3. Connect the FAST4350 to the AC Mains in accordance with the installation instructions in this booklet, and the markings on the identification label (voltage, current, and frequency of electricity network). 4. Connect the Ethernet cable (provided) to one of the RJ45 ports on the VDSL Router labeled "LAN1", "LAN2", "LAN3", or "LAN4". Then connect the other end of the Ethernet Cable to the Ethernet port of a computer. Repeat as necessary for the other available Ethernet ports. 5. For an Ethernet WAN configuration, connect the RJ45 port labeled “WAN” to the connection provided by your ISP. 6. For a VDSL configuration, connect the provided DSL Cable to the port on the VDSL Router labeled "DSL". Connect the other end of the DSL Cable to a standard Phone Jack. CAUTION: To reduce the risk of fire, always and only use a UL Listed or CSA Certified Telecommunication Line Cord (DSL cable) with a minimum wire gauge of 26AWG (0.4 mm dia. minimum, or 0.129 mm² minimum) or larger (e.g., 24AWG). When using this device, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons including the following: 1. Do not use this product near water and avoid contact with moisture. For example, do not use near a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Care should be taken so that liquids are not spilled on this equipment. 2. This equipment is for indoor use only, do not place or install in an outdoor location. 3. Never insert objects into the vents of this equipment as this can result in the risk of electrical shock or fire. 4. This equipment should only be operated from the type of power supply (Voltage and Current) indicated on the marking label. 5. Do not overload wall outlets or extension cords. Doing so can result in the risk of fire or electrical shock. 6. Avoid blocking any vent openings or exhaust exits on this equipment. Do not place equipment in a built-in installation such as a cabinet that may impede the flow of air through the ventilation openings. 7. The equipment should be situated away from heat sources such as radiators, heat registers, stoves, or other heat producing appliances and equipment. 8. Care should be taken to ensure that the power cord is routed, so it is not likely to be walked on or pinched by items placed upon or next to it. 9. Unplug this equipment before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning only. 10. This equipment is not user serviceable and is to be serviced by qualified personnel only. Do not disassemble this equipment. If service is required, disconnect all power and phones lines from the equipment and consult qualified service personnel. 11. To disconnect this equipment from AC power, unplug the power supply from the AC wall socket. 12. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 13. Do not use the telephone to report a gas leak in the vicinity of the leak. 14. Connect only to in house equipment (SELV interface). Save these Instructions! Safety and Certifications Ref : 253584089 09/01/2014 2 Industry Canada Statements This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. This product meets the applicable Industry Canada technical specifications/Le présent matériel est conforme aux spécifications techniques applicables d’Industrie Canada. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local Telecommunications Company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate. The Ringer Equivalence Number is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five. The REN of this device is 0.1B. L’indice d’équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de terminaux qui peuvent être raccordés à une interface téléphonique. La terminaison d’une interface peut consister en une combinaison quelconque de dispositifs, à la seule condition que la somme d’indices d’équivalence de la sonnerie de tous les dispositifs n’excède pas 5. Le REN de ce dispositif est 0.1B. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference rec…

Text truncated - open the document above for the full version.

=aGeMCOM Federal Communications Commission 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCCID:VVV3FAST4350 Product name: VVIRELESS XDSL ROUTER To whom it may concern: Date: 2014/1/30 We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization of model FAST4350 to the FCC Ru les and Regulations. International Certification Corp. Address Na me Job Title e-mail No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Hsiang, Tao Yuan Hsein 333, Taiwan (R.O.C.) Gary Chang Manager [email protected] .tw We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a deniai to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 835(a). This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Applicant Address Signature Name and Job Title. E-mail Tel. Sagemcom SAS SAGEMCOM SAS 250 Route de l'Empereur RUEIL MALMAISON CEDEX France 92848 Jacques LE ROUX 1 R&D General Methods Department Manager [email protected] +33 1 57 61 25 72 Siège social: 250, route de l'Empereur-92848 RUEIL-MALMAISON CEDEX-FRANCE Tél +33(0)157 6110 00-Fax: +33 (0)157 6110 01 SAS. au capotai del 58 29189S f-440 294 SIO RCS Nanterre www.sagemcom.com

=aGeMCOM Confidentiality Request Letter Federal Communications Commission Authorization and Evaluation Division FCC ID : VW3FAST4350 Permanent Confidentiality Request Date: 2014/1/30 Pursuant to Sections 0.457 and 0.459 of the Commission's Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: 1. Black Diagram 2. Schematics 3. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and ali accompanying documentation will not be made before the date of the Grant for this application Sincerely, Applicant's company name Applicant's company address Signature Job Title and Dept. E-mail Tel. Sagemcom SAS SAGEMCOM SAS 250 Route de l'Empereur RUEIL MALMAISON CEDEX France 92848 Jacques LE ROUX 1 R&D General Methods Department Manager [email protected] +33 1 57 61 25 72 Siège social: 250, route de l ' Empereur-92848 RUEIL-MALMAISON CEDEX-FRANCE Tél+ 33(0)1 57 61 10 00 · Fax: + 33 (0)1 57 61 10 01 S.A. S. au capital de 158 2918 95 f · 440 294 510 RCS Nanterre www.sagemcom.com

=aGeMCOM Subject: Ad Hoc Mode Function Declaration FCCID:VVV3FAST4350 To Whom it may concern, Rueil-Malmaison, on January 30, 2014 We, SAGEMCOM SAS, declare that the deviee does not support any non-US channels and country code selection in ali the operational mode(s) for the following product. Regards, Applicant Address Signature Name and Job Title. E-mail Tel. Sagemcom SAS SAGEMCOM SAS 250 Route de l'Empereur RUEIL MALMAISON CEDEX France 92848 Jacques LE ROUX 1 R&D General Methods Department Manager [email protected] +33 157 61 25 72 Siège social: 250, route de l'Empereur-92848 RUEIL-MALMAISON CEDEX-FRANCE Wl +33(0)1 57 6110 00-Fax: +33 (0)1 57 6110 01 5.A.5. au capo,.l de 158 291895 €-440 294 510 RC5 Nanterre www.sagemcom.com

=aGeMCOM Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: FCC Application for FCC ID: VW3FAST4350 To Whom it may concern, Rueil-Malmaison, on January 30, 2014 We, the undersigned, would like to declare that the composite portion catagorized as computer peripheral has been authorized under the Declaration of Conformity procedures, which the report issued from International Certification Corp.(report number: FD3D1310) Applicant Address Signature Name and Job Title E-mail Tel. Sagemcom SAS SAGEMCOM SAS 250 Route de l'Empereur RUEIL MALMAISON CEDEX France 92848 Jacques LE ROUX/ R&D General Methods Department Manager [email protected] +33 1 57 61 25 72 Siège social: 250, route de l'Empereur-92848 RUEIL-MALMAISON CEDEX-FRANCE Tél+ 33(0)1 57 61 10 00-Fax: +33 (0)1 57 61 10 01 S.A.S. au cap1tal de 158 291 895 € • ltltO 294 510 RCS Nanterre www.sagemcom.com

Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 1 OF 9 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 Photographs of EUT Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 2 OF 9 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 3 OF 9 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 Adapter Model No.: NBS24120200VU Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 4 OF 9 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 5 OF 9 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 RJ-45 Cable (1.8M) Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 6 OF 9 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 RJ-45 Cable (1.83M) Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 7 OF 9 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 RJ-11 Cable (1.83M) Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 8 OF 9 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 RJ-11 Cable (2.0M) Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 9 OF 9 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973

3000401800 1 1 R40 000 07 LB 21-08-2013 LANNI 14-11-2013 1/1 ETIQUETTE IDENTIFICATION 77x56- Fast 4350 BC PRODUCT LABEL 77x56 - Fast 4350 BC Cet article sera conforme aux spécifications environnementales Sagem, dont la Dir ective Européenne 2002/95/EC (RoHS) This article will be compliant with Sagem environmental specifications, including European Dir ective 2002/95/EC (RoHS) 2 A B 253562398 Test ed To Comply W ith FCC Standards REN: 0.1BUS: NS3DL01B FAST4350 FCC I D: VW3 FAST4350 This devic e complies wit h Part 15 of the F CC Rules. Operat ion is subject to the f ollowing t wo condit ions: (1) This devic e may not caus e harmf ul int erf erenc e, and (2) This dev ice mus t accept any int erf erence rec eived, including int erf erence t hat may cause undes ired operat ion. E308616 S/N: NQ1000101000001 P/N: 2222222222222 @MAC: 00:00:00:00:00:00 Rating: 12V 2.0A P/N: 253562546 Model : FAST4350 This product meet s the applicable I ndust ry Canada technic al spec ificat ions Le pres ent mat eriel est conf orme aux s pec ifications t echniques applicables d’I ndustrie Canada IC: 9140A -FAST4350 CAN ICES-3 (B)/NMB-3(B) Home Hub 1000 Wi-Fi Network Name (SSID) : XXXXXXX Wi-Fi Network Password (WPA2) : XXXXXXXX : L=22 x H=2,7 mm Etiquette adhésive plastifiée ; conforme aux directives de la norme CE / Plasticized adhesive Label; compliant with the directives of the standard CE N° 1 : CODE 39, H=5mm min. N° 13 : CODE 39, H=5mm min. N° 52 : CODE 39, H=5mm min. Respecter une Marge de 2mm à chaque bord de l’étiquette / Respect a Margin of 2mm in every edge of the label N° : 52 N° : 13 N° : 1 56 ± . 0 2 77±0.2 2 2 2 2 135° r=2 Label Location

Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 1 OF 18 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 Photographs of EUT Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 2 OF 18 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 3 OF 18 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 4 OF 18 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 5 OF 18 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 6 OF 18 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 7 OF 18 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 8 OF 18 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 9 OF 18 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 10 OF 18 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 11 OF 18 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 12 OF 18 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 13 OF 18 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 14 OF 18 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 15 OF 18 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 16 OF 18 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 17 OF 18 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973 Report No.: 3D1310 SPORTON International Inc. PAGE NUMBER : 18 OF 18 TEL : 886-3-327-3456 ISSUED DATE : Mar. 06, 2014 FAX : 886-3-327-0973

Report No.: FA3D1310 Report Format Version: 01 Page No. : i of ii FCC ID : VW3FAST4350 Issued Date : Mar. 06, 2014 Table of Contents 1. MAXIMUM PERMISSIBLE EXPOSURE.................................................................................................................... 1 1.1. Applicable Standard ..........................................................................................................................................................................1 1.2. MPE Calculation Method ....................................................................................................................................................................1 1.3. Calculated Result and Limit................................................................................................................................................................2 Report No.: FA3D1310 Report Format Version: 01 Page No. : ii of ii FCC ID : VW3FAST4350 Issued Date : Mar. 06, 2014 History of This Assessment Report REPORT NO. VERSION DESCRIPTION ISSUED DATE FA3D1310 Rev. 01 Initial issue of report Mar. 06, 2014 Report No.: FA3D1310 Report Format Version: 01 Page No. : 1 of 2 FCC ID : VW3FAST4350 Issued Date : Mar. 06, 2014 1. MAXIMUM PERMISSIBLE EXPOSURE 1.1. Applicable Standard Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device. (A) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz ; *Plane-wave equivalent power density 1.2. MPE Calculation Method E (V/m) ＝ d GP30 Power Density: Pd (W/m²) ＝ 377 2 E E ＝ Electric field (V/m) P ＝ Peak RF output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance between radiator and human body (m) The formula can be changed to Pd ＝ 2 377 30 d GP   From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Report No.: FA3D1310 Report Format Version: 01 Page No. : 2 of 2 FCC ID : VW3FAST4350 Issued Date : Mar. 06, 2014 1.3. Calculated Result and Limit Antenna Type : PCB Antenna Max Conducted Power for IEEE 802.11g: 28.64 dBm Antenna Gain (dBi) Antenna Gain (numeric) Average Output Power (dBm) Average Output Power (mW) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 3.77 2.3823 28.6355 730.3759 0.346335 1 Complies

SPORTON International Inc. No. 52, Hwa Ya 1st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. Ph: 886-3-327-3456 / FAX: 886-3-327-0973 / www.sporton.com.tw Report Format Version: 01 FCC RADIO TEST REPORT Applicant’s company SAGEMCOM SAS Applicant Address 250 Route de l'Empereur RUEIL MALMAISON CEDEX France 92848 FCC ID VW3FAST4350 Product Name WIRELESS XDSL ROUTER Brand Name SAGEMCOM Model No. FAST4350 Test Rule 47 CFR FCC Part 15 Subpart C § 15.247 Test Freq. Range 2400 ~ 2483.5MHz Received Date Dec. 13, 2013 Final Test Date Feb. 12, 2014 Submission Type Original Equipment Statement Test result included in this report is for the IEEE 802.11n and IEEE 802.11b/g part of the product. The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. The measurements and test results shown in this test report were made in accordance with the procedures and found in compliance with the limit given in ANSI C63.10-2009, 47 CFR FCC Part 15 Subpart C, KDB 558074 D01 v03r01 and KDB 662911 D01 v02r01. The test equipment used to perform the test is calibrated and traceable to NML/ROC. Report No.: FR3D1310 Report Format Version: 01 Page No. : i of ii FCC ID: VW3FAST4350 Issued Date : Mar. 06, 2014 Table of Contents 1. CERTIFICATE OF COMPLIANCE ......................................................................................................................... 1 2. SUMMARY OF THE TEST RESULT .......................................................................................................................... 2 3. GENERAL INFORMATION .................................................................................................................................. 3 3.1. Product Details....................................................................................................................................................................................3 3.2. Accessories .........................................................................................................................................................................................4 3.3. Table for Filed Antenna.......................................................................................................................................................................5 3.4. Table for Carrier Frequencies .............................................................................................................................................................5 3.5. Table for Test Modes ...........................................................................................................................................................................6 3.6. Table for Testing Locations..................................................................................................................................................................7 3.7. Table for Supporting Units ...................................................................................................................................................................7 3.8. Table for Parameters of Test Software Setting .....................................................................................................................................8 3.9. EUT Operation during Test ...................................................................................................................................................................8 3.10. Duty Cycle ..........................................................................................................................................................................................9 3.11. Test Configurations ...........................................................................................................................................................................11 4. TEST RESULT ................................................................................................................................................... 12 4.1. AC Power Line Conducted Emissions Measurement.........................................................................................................................12 4.2. Maximum Conducted Output Power Measurement .........................................................................................................................17 4.3. Power Spectral Density Measurement ..............................................................................................................................................20 4.4. 6dB Spectrum Bandwidth Measurement ..........................................................................................................................................30 4.5. Radiated Emissions Measurement ....................................................................................................................................................35 4.6. Emissions Measurement ....................................................................................................................................................................54 4.7. Antenna Requirements .....................................................................................................................................................................72 5. LIST OF MEASURING EQUIPMENTS ................................................................................................................... 73 6. MEASUREMENT UNCERTAINTY.......................................................................................................................... 75 APPENDIX A. TEST PHOTOS ........................................................................................................................ A1 ~ A5 Report No.: FR3D1310 Report Format Version: 01 Page No. : ii of i…

Text truncated - open the document above for the full version.

Report No.: FR3D1310 FCC ID: VW3FAST4350 Page No. : A1 of A5 Appendix A. Test Photos Report No.: FR3D1310 FCC ID: VW3FAST4350 Page No. : A2 of A5 1. Photographs of Conducted Emissions Test Configuration FRONT VIEW REAR VIEW Report No.: FR3D1310 FCC ID: VW3FAST4350 Page No. : A3 of A5 2. Photographs of Radiated Emissions Test Configuration Test Configuration: 9kHz ~30MHz FRONT VIEW REAR VIEW Report No.: FR3D1310 FCC ID: VW3FAST4350 Page No. : A4 of A5 Test Configuration: 30MHz~1GHz FRONT VIEW REAR VIEW Report No.: FR3D1310 FCC ID: VW3FAST4350 Page No. : A5 of A5 Test Configuration: Above 1GHz FRONT VIEW REAR VIEW