VWUY6600BLINC POD; MODEL: Y6600

Bluetooth stereo headset user guide Bluetooth Introduction: The Bluetooth headset is a portable headset solution based on Bluetooth wireless technology. Bluetooth wireless technology is a short-range radio communication technology intended to replace the cables connecting electronic devices. The technology uses a globally available frequency range intended to ensure communication compatibility worldwide. Caution: Listening at full volume to music or voice through a headset may damage your hearing. BlueToothHeadSet Control Buttons and Display Screen: BUTTON_MFB Multifunction Button BUTTON_VOL+ Volume Increase BUTTON_VOL- Volume Decrease BUTTON_MP3_Preview MP3 Preview----preview MP3 BUTTON_MP3_Next MP3 Next----Pause MP3 playing/Next MP3 In this Bluetooth headset design, the three buttons above were integrate to a Control Button. Middle is Multifunction Button(BUTTON_MFB), which can be use to control several headset functions. You can turn the Control Button to adjust speaker volume(BUTTON_VOL+/-), more detail as follow, you can turn deasil to increase volume , also you can turn anticlockwise to decrease volume. Bluetooth headset supports profiles and functions: Hands-Free Profile(HFP), HeadSet Profile(HSP), Advanced Audio Distribution Profile(A2DP), Audio/charger socket LED LIGHT Control Button mp3/ preview MP3 next Bluetooth Intercom function,FM radio. To use your headset, your phone or music device should support the following Bluetooth profiles: Profile Description HFP(Hands-freeProfile ) Providing a wireless means for both remote control of the Mobile Phone by the Hands-Free device and voice connections between the Mobile Phone and the Hands-Free device. A2DP (Advanced Audio Distribution Profile) AVRCP Stereo music streaming. MP3 CONTROL Bluetooth Interference Issues: The quality of Bluetooth transmission may also be affected by the position of your music device. Should you experience choppy or distorted audio, move the position of your music device or phone to a different location until the signal improves. Getting started: Before you can use your headset, you should first: Charge the headset battery. Connect Audio Plug Pair the headset with a device, for example, a mobile phone. Charging: The headset comes with a built-in rechargeable battery. We recommend that you charge the battery before using the headset for the first time. Connect the charger to the device. The charging time is about 2 hours.During charging,Red LED is on. When the battery is fully charged, Red LED is off. When you using the headset, if you hear a cadent tone, and Red LED is flashed , battery needs recharging. To charge, please use the handle on Charging Port Rubber Cover gently pull out the Cover, Expose the Charging Port and Plug the Charger Plug into the BlueTooth headset’s Charging Port. At this time Red LED is on when the battery is charging. As Figure2 shown. Connect Audio plug: Connect Audio plug is the same as the charger. Figure 2 To turn the headset on: Press and hold the Multifunction Button(BUTTON_MFB) for approximately 2 seconds until you hear a short low tone followed by a short high tone. Blue LED is flashed. When turned on, the headset automatically establishes handsfree phone and streaming music connections with the last connected Bluetooth devices (phone and/or music devices). To turn the headset off: Press and hold the Multifunction Button(BUTTON_MFB) for about 5 seconds until will hear a short high tone followed by a short low tone. To pairing the headset with a phone: Before using the headset,you should pair the headset to your mobile phone. The phone enter the searching BlueDevice mode and with the headset turned off, press and hold the Multifunction Button(BUTTON_MFB) for about 5 seconds until Blue led and Red led is flashed aterntively. Operate the phone to discover and connect the headset. The headset passkey is 0000. If pairing success. Pairing, done only once. Each time you use your headphones, it will be automatically connected to your phone. Note:Before enter pairing mode,please make sure other BlueDevices are closed. Charging Port Charging Port Rubber Cover Charging Plug Using the headset Listening to music: Your headset allows you to listen to stereo music from your Bluetooth streaming music source. Note: When placing or receiving calls, music playing from a Bluetooth music source is automatically paused. When the call is finished, music playing is resumed. STOP/PAUSE music: Press and hold MP3 Button 2 second when MP3 is playing. RESTART music: Press and hold MP3 Next Button 2 second if MP3 is paused using MP3 Button. SELECT PRVIEW music: Press MP3 preview button. SELECT NEXT music: Press MP3 next button To answer a call using the call handling button: When the headset rings, and display Call number ,press the Multifunction Button(BUTTON_MFB) to answer the incoming call . Terminate call: Press the Multifunction Button(BUTTON_MFB) to terminate call. To reject a call: When the headset rings, press and hold the Multifunction Button(BUTTON_MFB) until you hear a long beep. Note: this function valid only if your phone support Hands-Free Profile. Vo i c e D i a l : If headset in idle time, press and hold the Multifunction Button(BUTTON_MFB) until you hear a long beep,then release. Adjusting Volume: To increase speaker volume, turn the Control Button deasil once can increase a volume level , repeatedly, until you reach the desired volume level. To decrease speaker volume, turn the Control Button anticlockwise once can decrease a volume level , repeatedly, until you reach the desired volume level. You can adjust the headset speaker volume during a call, or the ring volume when you are not engaged in a call. Figure 4 To transfer the sound to the phone: During a call using your headset, press and hold the Multifunction Button(BUTTON_MFB)for about 2 seconds.If your headset work with HeadSetProfile, you just need turn down your headset. Transferring sound from phone to headset: If you make a cal…

Text truncated - open the document above for the full version.

PHOTOGRAPHS OF THE EUT ALL VIEW OF SAMP TOP VIEW OF SAMPLE BOTTOM VIEW OF SAMPLE LEFT VIEW OF SAMPLE RIGHT VIEW OF SAMPLE FRONT VIEW OF SAMPLE BACK VEIW OF SAMPLE

FCC ID Label FCC ID: VWUY6600 This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference that is received, including any interference that may cause undesired operation.

FCC ID Label Location

INTERNAL PHOTO OF SAMPLE – 1 INTERNAL PHOTO OF SAMPLE – 2 INTERNAL PHOTO OF SAMPLE – 3 INTERNAL PHOTO OF SAMPLE – 4

Radio Frequency (RF) Tr a n s m i t ter The internal PA has a maximum output power of +8dBm with level control 8dB from amplitude control. This is applied into Class1, Class2/3 radios without external RF PA, if you want a larger output power for Class 1 appication, the external PA can be used, The transmitter features IQ direct conversion to minimize the frequency drift, And it can be excess 30dB power rang with temperature compensation machine. Each frequency is used equally on the average by the transmitter Receiver The LNA can be operated with TR-combined mode for single port application. The image frequency for LOW-IF architecture. The ADC is utilized to sample input analogue wave to convert into digital for de-modulator analysis. Before the ADC, a channel filter has been integrated into receiver channel that can reduce the external component count and increase the anti-interence capacity. For avoiding temperature variation issues, a temperature sensor with temperature calibration is utilized into bias current and gain control of LNA, Mixers and RF AMP.

Shanghai Hehui Safety Products Manufacture Co.,Ltd 012345 6 7 4 3 Encoder SR111-MT-9KQ-0.5-004 YONGJIA ELECTRONIC PCS 1 self-perchase J2 Polymer Battery AEC502035 GUANGZHOU GUOGUANG PCS 1 self - perchase Virtual Parts name Supplier Units mark level the bom for bluetooth headset Y6600 Amount Polymer Battery AEC502035 GUANGZHOU GUOGUANG PCS 1 self perchase 5 3 12 PIN 12PIN HEADER 1.27mm,12Pin FH1.27*3.4 1*12P KUNSHANG WEIFEN G PCS 1 self-perchase J1 6 3 PCB Lead-free LY610 PCS 1 self-perchase 7 4 mini 8pin usb USB miniusb 8pin(smt-1) PCS 1 HOMEMADE U13 8 4 SWITCH SWITCH TD-26EA GAOTE ELECTRONIC PCS 2 self-perchase S1,S2 SAGA GAO S H A N G H A I TIN G M AO ZHEJIANG WANZHENG 10 4 AMP AMP MSOP、Lead-free HWD2190MM ETC PCS 2 self-perchase U2,U11 11 4 CHARGE IC CHARGE IC TSOT-23-5,Lead-free TP4054 TUOWEI PCS 1 self-pe rchase U17 CM2831GPIM25 CHAMPION MICROELECTRONIC CORPORATION CM2838GPIM25 CHAMPION PCS LDO U6,U8 self-perchase 300mA COMS LDO WITH ENABLE、Lead-free PCS LDO 9 YD-Y6600-3 4 MAIN PCB four-layer，Gold，1mm、Lead-free PCB 1 self-perchase 2 4 12 PT5108E23E-30 HUARUIXIWEI 13 4 SWITCHING Diode Bav70 SOT23、Lead-free BAV70LT1 ONSEMI PCS 1 self-pe rchase U3 14 4 FERRITE FERRITE Lead-free HMD950T-T SOSHIN PCS 1 self-perchase U22 15 4 Switch Switch SC-70,Lead-free AS179-92 ALPHA PCS 2 self-perchase U 7,U18 Crystal Crystal 26MHz Y1 SMD - XTAL Crystal Crystal 26MHz Y1 SMD XTAL 16 4 RF AMP QFN20,Lead-free T7024 ATMEL PCS 1 self-perchase U14 RFANT5220110A0T WALSIN LA5220P2450_A04 ZHEJIANG ZHENGYUAN RES RES 0402、1K、1/16W、1%、Lead-free RC0402FR-071K0L PHYCOMP PCS 1 self- perchase R7 19 4 RES RES 0402、1.8K、1/16W、1%、Lead-free RC0402FR-071K8L PHYCOMP PCS 1 self-perchase R6 2.4GHz、Lead-free PCS 1 self-perchase U10 4 17 ANT ANT 21 4 RES RES 0402、10K、 1/16W、5%、Lead-free RC0402JR-0710KL PHYCOMP PCS s r40 self-perchase R3 52 4 0010001GJB02 RES RES 0402、0、 1/16W、5%、Lead-free RC0402JR-070RL PHYCOMP PCS 7 self-perchase R11,R30, R42,R43,R44,R47, C15 22 4 RES RES 0402 20 K 1 / 16 W 5 % Ld f RC0402JR 0720KL PHYCOMP PCS 11 lf h R9,R15,R19,R20, R23 , R24 , R28 , R32 , 22 4 RES RES 0402 、 20 K 、 1 / 16 W 、 5 % 、 L ea d - f ree RC0402JR - 0720KL PHYCOMP PCS 11 se lf -perc h ase ,,,, R38, R39,R40, 23 4 RES RES 0402、47K、 1/16W、5%、Lead-free RC0402JR-0747KL PHYCOMP PCS 1 1 self-perchase R10,R13,R14,R17,R18,R27,R29,R31,R33,R3 6, R37, 24 4 RES RES 0402、4.7K、1/16W、5%、Lead-free RC0402JR-074K7L PHYCOMP PCS 2 self-perchase R2,R12 25 4 RES RES 0402、150K、1/16W、5%、Lead-free RC0402JR-07150KL PHYCOMP PCS 1 self-perchase R53 26 4 RES RES 0402 100 K 1 / 16 W 5 % Lead - free RC0402JR - 07100KL PHYCOMP PCS 4 self - perchase R1 R22 R34 R35 26 4 RES RES 0402 、 100 K 、 1 / 16 W 、 5 % 、 Lead free RC0402JR 07100KL PHYCOMP PCS 4 self perchase R1 , R22 , R34 , R35 27 4 RES RES 0402、220K、1/16W、1%、Lead-free RC0402FR-07220KL PHYCOMP PCS 1 self-perchase R21 RC0402JR-071ML PHYCOMP MCR01MZPJ105 ROHM 29 4 CAP CAP 0402、0.5PF、50V、±0.25PF、Lead-free、(HF) C1005C0G1H0R5C TDK PCS 2 self-perchase L1,C16 30 4 CAP CAP 0402、1PF、50V、±0.05PF、Lead-free、(HF) NP00402HTTD1J Koa PCS 1 self-perchase C71 32 4 CAP CAP 0402、2.7PF、50V、5%、Lead-free、(HF) NP00402HTTD2R7J Koa PCS 2 self-perchase C69 R16 self-perchase 1 PCS 0402、1M、 1/16W、5%、Lead-free 4 RES RES 28 34 4 CAP CAP 0402、10PF、50V、5%、Lead-free、(HF) NP00402HTTD10J Koa PCS 6 se lf-perchase C14,C17,C77,C78, C88,C89 35 4 CAP CAP 0402、56PF、50V、5%、Lead-free、(HF) NP00402HTTD56J Koa PCS 1 se lf-perchase C46 36 4 CAP CAP 0402、100PF、50V、5%、Lead-free、(HF) NP00402HTTD100J Koa PCS 6 self-perchase C70,C72,C76,C79, C83,C87 37 4 IND IND 0402、1.2NH、±0.1NH、 Lead-free、(HF) KL731ETTP1N2B Koa PCS 1 s elf-perchase L6 38 4 IND IND 0402、18NH、2%、 Lead-free、(HF) KL731ETTP18G Koa PCS 2 self-pe rchase L2,L5 C1005C0G1H150J TDK GRM1555C1H150JZ01D MURATA 0402、15PF、50V、C0G、±5%、 Lead-free C50,C54,C74,C75 self-perchase PCS 4 39 4 CAP CAP 40 4 CAP CAP 0402、1NF、50V、COG、±5%、Lead-free NP00402HTTD102J Koa PCS 6 se lf-perchase C11,C13,C20,C47, C51,C55, 41 4 CAP CAP 0402、47PF、50V、C0G、±5% 、Lead-free C1005C0G1H470J TDK PCS 1 s elf-perchase C6 42 4 CAP CAP 0402、100NF、10V、X5R、±10%、Lead-free C1005X5R1A104K TDK PCS 6 self-perchase C4,C5,C25,C26,C9, C18, 43 4 CAP CAP 0603、1UF、16V、Y5V、 +80,-20%、Lead-free C1608Y5V1C105Z TDK P CS 7 self-perchase C1,C7,C8,C10,C19, C22,C27 44 4 CAP CAP 0603,2u2、6.3V、X5R, +/- 20%,(Lead-free) GRM155R60J225ME1 5D Murata PCS 2 self-perchase C12,C21 45 4 CAP CAP 0603,4U7、6.3V、X5R, +/- 10%,(Lead-free) GRM188R60J475KE1 9D Murata PCS 2 self-perchase C2,C3 46 4 Module PCBA BC5 52PIN PB-BCM-07 SET 1 HOMEMADE U1 47 48 3 12PIN 12PIN HEADER PH1.27*2.0 1*12P KUNSHANG WEIFENG PCS 1 self-perch ase J1 36 4 RES RES 0402、4.7K、1/16W、5%、Lead-free RC0402JR-074K7L PHYCOMP PCS 2 self-perchase R1,R2 37 4 RES RES 0402、100、 1/16W、5%、Lead-free RC0402JR-07100RL PHYCOMP PCS 2 self-perchase R3,R4 38 4 NPN Transistor NPN NPN;SOT-23、Lead-free PMBT3904 PHILIPS PCS 2 self-pe rchase Q1,Q2 39 4 LED_RED LED_RED 0603、RED、WATER CLEAR 、 HightLight SS-190URC-762 NI NGBO SHENGPU PCS 1 self-perchase D1 40 4 LED_BLUE LED_BLUE 0603、BLUE、WATER CLEAR、 HightLight SS-190SBC-06G NINGBO SHENGPU PCS 1 self-perchase D2 1 0 1 0 21 9 1 299Y63000100 MIC,Earphone MINUSB Plug(6PIN) SET 1 self-perchase 10 1 R4202Y6300001 Shell ABS Shanghai Hehui PCS 1 self-perchase 11 1 R4202Y6300002 dhll ABS Sh hiHhi PCS 1 lf h 11 1 R4202Y6300002 d own s h e ll ABS Sh ang h a i H e h u i PCS 1 se lf -perc h ase 13 1 R4202Y6300003 USB rubber TPU Shanghai Hehui PCS 1 self-perchase 1 LCD Lens PC Shanghai Hehui PCS 1 self-perchase 23 1 R4202Y6300005 Control button ABS Shanghai Hehui PCS 1 self-perchase 1 Connect button ABS Shanghai Hehui PCS 1 self-perchase 24 1 R4202Y6300006 decorative pieces Shanghai Hehui PCS 1 self-perchase Electroforming 1 Seal buttons NR yuyao longyuan PCS 0-type rubber seals A0069G GB3452.1-92 yuyao longyuan PCS 2 self-per chase 35 1 411180060131 screw ST1.8×9 Cross Slot,black ningbo weili PCS 3 sel f-perchase 35 1 411140060131 screw ST1.4×5Cross Slot,black ningbo weili PCS 1 self -perchase Sold…

Text truncated - open the document above for the full version.

OET Bulletin 65 (MPE) Test Report For Blinc pod Model Name: Y6600 Brand Name: N/A FCC ID: VWUY6600 Report No.: AGC10430911GZ01-3E7 Date of Issue: Nov.20, 2009 Prepared For Shanghai Hehui Safety Products Manufacture Co., Ltd. 8 Fengjin road, Xidu Industrial Zone, Fengxian District, Shanghai, 201401 TEL: 021-5743 6661 FAX: 021-5743 5112 Prepared By Attestation of Global Compliance Co., Ltd. 2F., No.2 Building, Huafeng No.1 Technical Industrial Park, Sanwei, Xixiang, Baoan District, Shenzhen TEL: 86-755-2908 1966 FAX: 86-755-2600 8484 Report No.:AGC10430911GZ01-3E7 Page 1 of 7 TABALE OF CONTENTS TABALE OF CONTENTS .................................................................................................................................. 1 1. TEST RESULT CERTIFICATION ................................................................................................................. 2 2. TECHNICAL INFORMATION....................................................................................................................... 3 2.1 EUT DESCRIPTION ..................................................................................................................................... 3 3. RF EXPOSURE MEASUREMENT .............................................................................................................. 4 3.1 INTRODUCTION .......................................................................................................................................... 4 3.2 FCC LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE(MPE) .............................................................. 5 4. CLASSIFICATION OF THE ASSESSMENT METHODS ............................................................................... 6 Report No.: AGC10430911SZ01-3E7 Page 2 of 7 1. TEST RESULT CERTIFICATION Applicant Name: Shanghai Hehui Safety Products Manufacture Co., Ltd. Address: 8 Fengjin road, Xidu Industrial Zone, Fengxian District, Shanghai, 201401 Manufacturer Name: Shanghai Hehui Safety Products Manufacture Co., Ltd. Address: 8 Fengjin road, Xidu Industrial Zone, Fengxian District, Shanghai, 201401 Brand Name: N/A Equipment Under Test: Blinc pod Model Number: Y6600 Test Standard OET Bulletin 65 (Edition 97-01) Supplement C (Edition 01-01) File Number: AGC10430911GZ01-3E7 Date of Test: Nov.20, 2009 We (AGC), Shenzhen Attestation of Global Compliance Science & Technology Co., Ltd. for compliance with the requirements set forth in the European Standard OET Bulletin 65 (Edition 97-01) Supplement C (Edition 01-01) The results of testing in this report apply to the product/system which was tested only. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Checked By: Jekey Zhang Nov.20, 2009 Authorized By: King Zhang Nov.20, 2009 Report No.: AGC10430911SZ01-3E7 Page 3 of 7 2. TECHNICAL INFORMATION Note: the following data is based on the information by the applicant. 2.1 EUT DESCRIPTION Product Blinc pod Brand / Model Name N/A Support Channels CH 00 – CH 78 Modulation GFSK Antenna Type Integrated Antenna Power Supply DC5.50V (Supplied By Adapter) Channels Frequency CH 00 2.402GHZ CH 78 2.480GHZ Channel Space = 1MHz Note: 1. The EUT is Bluetooth Handset. The EUT provides Bluetooth wireless interface operating at 2.4G ISM band (2400MHZ-2483MHZ). The EUT use (GFSK) modulation. 2. Please refer to Appendix for the photographs of the EUT. For more details, please refer to the User’s manual of the EUT. Report No.: AGC10430911SZ01-3E7 Page 4 of 7 3. RF EXPOSURE MEASUREMENT 3.1 INTRODUCTION Human exposure to RF emissions from mobile devices (47 CFR §2.1091) may be evaluated based on the MPE limits adopted by the FCC for electric and magnetic field strength and/or power density, as appropriate, since exposures are assumed to occur at distances of 2.5 cm or more from persons. The 1992 ANSI/IEEE standard (See Listed limit table) specifies a minimum separation distance of 1cm for performing reliable field measurements to determine adherence to MPE limits. If the minimum separation distance between a transmitter and nearby persons is more than 2.5 cm under normal operating conditions, compliance with MPE limits may be determined at such distance from the transmitter. When applicable, operation instructions and prominent warning labels may be used to alert the exposed persons to maintain a specified distance from the transmitter or to limit their exposure durations and usage conditions to ensure compliance. Report No.: AGC10430911SZ01-3E7 Page 5 of 7 3.2 FCC LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE(MPE) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE Frequency Range (MHz) E-field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Time |E| 2 , |H| 2 or S (Minutes) 0.3 -- 1.34 614 1.63 (100)* 30 1.34 -- 30 824/f 2.19/f (180/f 2 )* 30 30 -- 300 27.5 0.073 0.2 30 300 -- 1500 -- -- f/1500 30 1500 -- 100,000 -- -- 1.0 30 *Note: 1. f=Frequency in MHz * Plane-wave Equivalent Power Density 2. The averaging time for General Population/Uncontrolled exposure to fixed transmitters is not applicable for mobile and portable transmitters. See 47 CFR §§2.1091 and 2.1093 on source-based time-averaging requirements for mobile and portable transmitters. Report No.: AGC10430911SZ01-3E7 Page 6 of 7 4. CLASSIFICATION OF THE ASSESSMENT METHODS The antenna of the product, under normal use condition is at least 2.5 cm away from thebody of the user. Warning statement to the user for keeping at least 1cm separation distance and the prohibition of operating to a person has been printed on the user’smanual. So, this product under normal use is located on electromagnetic far field betweenthe human body. S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna MPE Calculated Values for Blinc p…

Text truncated - open the document above for the full version.

<Drawn By> <Checked By> <QC By> <Released By> <Drawn Date> <Checked Date> <QC Date> <Release Date> <Company Name> <Title> <Code>C<Drawing Number><Revision> <Scale>11 REV:SIZE:CODE: DRAWN:DATED: DATED:CHECKED: QUALITY CONTROL:DATED: DATED:RELEASED: COMPANY: TITLE: DRAWING NO: SHEET: OFSCALE: REVISION RECORD APPROVED:ECO NO:LTRDATE: 123456 D C B A C D B A 1 24 3 Y1 SMD-XTAL L1 RF_N K1 RF_P H2 AUX_DAC A1 VSS_AUDIO D3 VSS_AUDIO B4 VSS_DIG C4 VSS_DIG C12 VSS_DIG C13 VSS_DIG C14 VSS_DIG H3 VSS_DIG L13 VSS_DIG N4 VSS_DIG N8 VSS_DIG N13 VSS_DIG J2 VSS_RADIO K2 VSS_RADIO L2 VSS_RADIO K3 VSS_LO L3 VSS_LO P2 VSS_ANA B12 BAT_N R3 SUBS C3 VSS J3 VSS M3 VSS F6 VSS F7 VSS F8 VSS F9 VSS F10 VSS G6 VSS G7 VSS G8 VSS G9 VSS G10 VSS H6 VSS H7 VSS H8 VSS H9 VSS H10 VSS R1 XTAL_IN R2 XTAL_OUT D14 LED[1] D13 LED[0] M15 PIO[15] J15 PIO[14] K14 PIO[13] K13 PIO[12] L14 PIO[11] M13 PIO[10] M14 PIO[9] J14 PIO[8] J13 PIO[7] H15 PIO[6] H14 PIO[5] H13 PIO[4] F3 PIO[3] G3 PIO[2] F2 PIO[1] F1 PIO[0] F14 PCM_SYNC G15 PCM_IN F15 PCM_OUT F13 PCM_CLK E14 SPI_CLK D15 SPI_MISO E13 SPI_MOSI E15 SPI_CS# P13 USB_DN P14 USB_DP N14 UART_RX N15 UART_TX P15 UART_CTS R15 UART_RTS R4 AIO[0] N3 AIO[1] P3 LO_REF G14 TEST_EN G13 RST# R14 VDD_USB L15 VDD_PADS R8 VDD_MEM B9 VDD_MEM A8 VDD_MEM A4 VDD_MEM G1 VDD_PIO A2 VDD_AUDIO A15 VREGIN_H M2 VREGENABLE_L B14 VREGENABLE_H B13 BAT_P A12 VDD_CHG A14 VDD_SMP_CORE A13 LX N2 VREGIN_L P1 VDD_ANA C15 VDD_CORE K15 VDD_CORE M1 VDD_RADIO N1 VDD_LO B2 MIC_B_P C1 MIC_A_N C2 MIC_A_P D2 SPKR_B_N D1 SPKR_B_P E2 SPKR_A_N E1 SPKR_A_P E3 AU_REF A5 D[15] C5 D[14] B6 D[13] A7 D[12] C7 D[11] C8 D[10] B10 D[9] A11 D[8] B5 D[7] A6 D[6] C6 D[5] B7 D[4] B8 D[3] A9 D[2] C10 D[1] B11 D[0] N12 A[20] P8 A[19] N9 A[18] R10 A[17] P9 A[16] R5 A[15] P5 A[14] N5 A[13] R6 A[12] P6 A[11] N6 A[10] R7 A[9] P7 A[8] P10 A[7] N10 A[6] R11 A[5] P11 A[4] N11 A[3] R12 A[2] P12 A[1] C9 A[0] N7 WE# A10 CS# C11 OE# R9 FLASH_RP# P4 N/C G2 N/C H1 N/C J1 N/C K10 VSS K9 VSS K8 VSS K7 VSS K6 VSS J10 VSS J9 VSS J8 VSS J7 VSS J6 VSS B1 MIC_B_N B3 MIC_BIAS R13 VDD_MEN B15 VREGOUT_H A3 VREGIN_AUDIO U1 BC57687B_1 E1 A0 D1 A1 C1 A2 A1 A3 B1 A4 D2 A5 C2 A6 A2 A7 B5 A8 A5 A9 C5 A10 D5 A11 B6 A12 A6 A13 C6 A14 D6 A15 E6 A16 B2 A17 C3 A18 D4 A19 D3 NC A4 WE# F1 CE# G1 OE# B4 RESET# F6 BYTE# G4 VCC E2 DQ0 H2 DQ1 E3 DQ2 H3 DQ3 H4 DQ4 E4 DQ5 H5 DQ6 E5 DQ7 F2 DQ8 G2 DQ9 F3 DQ10 G3 DQ11 F4 DQ12 G5 DQ13 F5 DQ14 G6 DQ15A_1 A3 RY/BY# B3 NC C4 NC H1 VSS H6 VSS U2 S29AL016D 5 GND 8 GND 7 GND 3 NC 1 UNBAL 2 DC 4 BAL 6 BAL U3 DBF81F104 C1 15PF C2 2U2 C5 2U2 C6 2U2 C7 2U2 C8 10N C9 10N R1 2R2 R2 2R2 L1 22UH C3 10N C10 4u7 1 VBUS 1 VDD_BAT 1 ANT C4 15PF 1 2 L2 L-18NH-0402 15NH 1 AUX_DAC C11 10N C12 47NF 1 SPKR_A_P 1 SPKR_A_N 1 SPKR_B_P 1 SPKR_B_N C13 100NF C14 100NF C15 100NF C16 100NF C17 1UF R4 2K2 R5 2K2 1 2 L3 L-18NH-0402 15NH 1 2 L4 L-18NH-0402 15NH C18 15PF C19 15PF 1 MIC1 1 MIC2 1 AGND C20 10N 1 AIO_1 1 AIO_0 1 UART_RTS 1 UART_CTS 1 UART_TX 1 UART_RX 1 USB_DP 1 USB_DN 1 SPI_CSB 1 SPI_MOSI 1 SPI_MISO 1 SPI_CLK 1 PIO_0 1 PIO_1 1 PIO_2 1 PIO_3 1 PIO_4 1 PIO_5 1 PIO_6 1 PIO_7 1 PIO_8 1 PIO_9 1 PIO_10 1 PIO_11 1 PIO_12 1 PIO_13 1 PIO_14 1 PIO_15 1 LED[1] 1 LED[0] C21 6p8 C22 18PF 1 AGND2 1 +3V3 1 GND2 1 GND3 1 GND4 1 GND5 1 GND6 1 GND7 1 GND8 1 GND9 HANPAN 1 BIAS1 1 BIAS2-EN 1 1V8 +1V5+1V8 +1V8+1V5_AUDIO+3V3+3V3+3V3+3V3 +1V5 A[00:19] A00 A01 A02 A03 A04 A05 A06 A07 A08 A09 A10 A11 A12 A13 A14 A15 A16 A17 A18 A00A01A02A03A04A05A06A07A08A09A10A11A12A13A14A15A16A17A18 D[00:15] D00 D01 D02 D03 D04 D05 D06 D07 D08 D09 D10 D11 D12 D13 D14 D15 D00D01D02D03D04D05D06D07D08D09D10D11D12D13D14D15 +3V3 +3V3 AGNDAGNDAGND AGNDAGNDAGND AGND AGND AGND AGND AGND AGND AGND AGND AGND AGND AGND AGND A19 A19 +3V3 +3V3 +1V8 <Drawn By> <Checked By> <QC By> <Released By> <Drawn Date> <Checked Date> <QC Date> <Release Date> <Company Name> <Title> <Code>A2<Drawing Number><Revision> <Scale>12 REV:SIZE:CODE: DRAWN:DATED: DATED:CHECKED: QUALITY CONTROL:DATED: DATED:RELEASED: COMPANY: TITLE: DRAWING NO: SHEET: OFSCALE: REVISION RECORD A B C D DATE: 123456 D C B A LTRECO NO:APPROVED: 1 GND 2 RF 3 GND 4 PIO_0 5 PIO_1 6 AGND 7 SPKR_B_P 8 SPKR_B_N 9 SPKR_A_P 10 SPKR_A_N 11 MIC1 12 MIC2 13 AGND 14 PIO_7 15 PIO_5 16 VBUS 17 PIO_4 18 GND 19 LED[1] 20 LED[0] 21 VDD_BAT 22 GND 23 SPI_MISO 24 SPI_CLK 25 SPI_CSB 26 SPI_MOSI 27 GND 28 PIO_6 29 PIO_8 30 PIO_14 31 +3V3 32 PIO_13 33 PIO_9 34 GND 35 UART_TX 36 UART_RX 37 GND 38 PIO_15 39 PIO_11 40 PIO_12 41 PIO_10 42 GND 43 USB_DP 44 USB_DN 45 UART_CTS 46 UART_RTS 47 AIO_O 48 AIO_1 49 GND 50 PIO_2 51 PIO_3 52 AUX_DAC U1 BC5 1 IN 5 OUT 4 ADJ 2 GND 3 EN U6 CM2831 C9 100NF C10 1UF C11 1NF C12 2U2 R12 4.7K R13 47K R14 47K D5 R15 20K R16 1M R17 47K R18 47K R19 20k R20 20k R21 220K1% R22 100K C15 0 1 2 L1 0.5P C16 0.5PF U10 SPI_MOSI SPI_CSB SPI_CLK SPI_MISO V33 7 NC 6 NC 4 D 5 E 3 C 2 COM 1 A J2 ANJIANXIN1 GND1 1 2 R25 2K2 1 2 R26 2K2 1 2 3 4 5 6 7 8 9 10 11 12 J1 CON12 1 2 R8 470 1 CATHODE 2 ANODE U4 LED0603 VBATT GND 1 2 3 4 5 6 7 8 9 10 11 12 13 14 U13 USB-1 U3 1 2 R34 100K 1 2 R35 100K R36 47K R37 47K R38 20k R39 20k 1 2 S1 1 2 S2 1 2 R40 20k 1 2 R41 470 1 CATHODE 2 ANODE U5 LED0603 RX TX 1 CHARGE 2 GND 3 BAT 4 VCC 5 PROG U17 TP4054 D8 R1 100K C1 1UF R2 4K7 R3 10K R43 0 R53 150K 1 2 R4 20K 1 2 R5 2K2 R9 20k R1047K R11 0 C2 4U7F C25100NF C26100NF 4 IN- 2 BYPASS 1 SHUTDOWN/ 5 VO1 8 VO2 6 VDD 7 GND 3 IN+ U2 HWD2190 C27 1UF R23 20k R2747K R28 20k R29 47K R30 0 C3 4U7F C4100NF C5 100NF 4 IN- 2 BYPASS 1 SHUTDOWN/ 5 VO1 8 VO2 6 VDD 7 GND 3 IN+ U11 HWD2190 C7 1UF R32 20k R33 47K C8 1UF 1 2 R42 0 1 2 R44 0 C22 1UF 1 2 R45 20k 1 2 R46 20k 1 2 R47 0 1 2 R48 0 1 2 R49 0 MIC1 AGND VBATT EN V33 AUDIO_OUT_N_LT AUDIO_OUT_P_LT AUDIO_OUT_N_RT AUDIO_OUT_P_RT PIO9 PIO3 EN ON_OFF AIO0 VBATT KEY2KEY1 PIO5PIO4 PIO3 PIO9 PIO11 PIO5 PIO4 V33 AGND AIO0 AUX_DAC RF_IN RF_OUT KEY2 KEY2 ON_OFFVBATT KEY1 VBATT PIO_1 PIO_0 PIO8 SCL SDA V33 V33 PIO13 PIO12 PIO15 PIO12 PIO15 GND V33 PIO13 SDA SCL GND AUDIO_LEFT AUDIO_RIGHT VBATT VBATT GND VBUS VBUS MIC1 AGND OUTL- OUTL+ OUTR- OUTR+ PIO10PIO2 …

Text truncated - open the document above for the full version.

FCC Part 15 TEST REPORT For Blinc pod Model Name: Y6600 Brand Name: N/A FCC ID: VWUY6600 Report No.: AGC10430911GZ01-3E6 Date of Issue: Nov.20, 2009 Prepared For Shanghai Hehui Safety Products Manufacture Co., Ltd. 8 Fengjin road, Xidu Industrial Zone, Fengxian District, Shanghai, 201401 TEL: 021-5743 6661 FAX: 021-5743 5112 Prepared By Attestation of Global Compliance Co., Ltd. 2F., No.2 Building, Huafeng No.1 Technical Industrial Park, Sanwei, Xixiang, Baoan District, Shenzhen TEL: 86-755-2908 1966 FAX: 86-755-2600 8484 Report No.:AGC10430911GZ01-3E6 Page 1 of 48 VERIFICATION OF COMPLIANCE Applicant: Shanghai Hehui Safety Products Manufacture Co., Ltd. Address 8 Fengjin road, Xidu Industrial Zone, Fengxian District, Shanghai, 201401 Product Description: Blinc pod Brand Name: N/A Model Number: Y6600 FCC ID VWUY6600 Report Number: AGC10430911GZ01-3E6 Date of Test: Nov.15, 2009-Nov.20, 2009 WE HEREBY CERTIFY THAT: The above equipment was tested by Shenzhen Attestation of Global Compliance Science & Technology Co., Ltd. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2009) and the energy emitted by the sample EUT tested as described in this report is in compliance with radiated emission limits of FCC Rules Part 15.247. Checked By: Jekey Zhang Nov.20, 2009 Authorized By King Zhang Nov.20, 2009 Report No.:AGC10430911GZ01-3E6 Page 2 of 48 TABLE OF CONTENTS 1.GENERAL INFORMATION .................................................................................................. 4 1.1 PRODUCT DESCRIPTION............................................................................................................. 4 1.2 RELATED SUBMITTAL(S) / GRANT (S) ......................................................................................... 4 1.3 TEST METHODOLOGY ................................................................................................................ 4 1.4 TEST FACILITY........................................................................................................................... 4 1.5 SPECIAL ACCESSORIES ............................................................................................................. 4 1.6 EQUIPMENT MODIFICATIONS ...................................................................................................... 4 2. SYSTEM TEST CONFIGURATION ..................................................................................... 5 2.1 CONFIGURATION OF TESTED SYSTEM .................................................................................................. 5 2.2 E QUIPMENT USED IN TESTED SYSTEM ................................................................................................. 5 3. SUMMARY OF TEST RESULTS ........................................................................................ 6 4. DESCRIPTION OF TEST MODES ...................................................................................... 6 5. CONDUCTION EMISSIONS ............................................................................................... 7 5.1 MEASUREMENT PROCEDURE: ............................................................................................................... 7 5.2 T EST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ...................................................................... 7 5.3 M EASUREMENT EQUIPMENT USED: ...................................................................................................... 7 5.4 L IMITS AND MEASUREMENT RESULT: ................................................................................................... 8 5.5 TEST RESULT OF LINE CONDUCTED EMISSION TEST ............................................................................. 9 6. MAXIMUM OUTPUT POWER ........................................................................................... 11 6.1 MEASUREMENT PROCEDURE: .................................................................................................................. 11 6.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ......................................................................... 11 6.3 MEASUREMENT EQUIPMENT USED: ....................................................…

Text truncated - open the document above for the full version.