VYT-LP2396KOutdoor 2.4GHz Wireless AP/CPE/Bridge

1 LP-2396K Outdoor 2.4GHz Wireless AP/CPE/Bridge User Manual 2 Table of Contents 1. Introduction ......................................................................................................................................... 3 1.1 Product Introduction ................................................................................................................ 4 1.2 Package Content ..................................................................................................................... 5 1.3 Product Features ..................................................................................................................... 6 1.4 Application ............................................................................................................................... 6 1.4.1 Wireless ISP (WISP) Mode .......................................................................................... 6 1.4.2 Bridge Mode ................................................................................................................. 7 1.5 Product Outline Introduction .................................................................................................... 8 1.5.1 Front view ..................................................................................................................... 8 1.5.2 Back view ..................................................................................................................... 8 1.5.3 LED Indication .............................................................................................................. 9 1.5.4 I/O Interface ................................................................................................................ 10 1.5.5 Mounting Options ....................................................................................................... 11 2. Hardware Installation ....................................................................................................................... 12 2.1 Connection overview ............................................................................................................. 12 2.2 Installation Steps ................................................................................................................... 12 2.3 IP Surveillance ....................................................................................................................... 14 3. Software Configuration .................................................................................................................... 15 3.1 System Requirements ........................................................................................................... 15 3.2 Easy Installation ..................................................................................................................... 15 3.3 Get started with LP-2396K .................................................................................................... 16 4. Software Features ............................................................................................................................ 17 4.1 Operation Mode ..................................................................................................................... 17 4.1.1 Access Point ............................................................................................................... 17 4.1.2 Client .......................................................................................................................... 25 4.1.3 WDS Access Point ..................................................................................................... 33 4.1.4 WDS Client ................................................................................................................. 41 4.1.5 AP Router ................................................................................................................... 49 4.1.6 Wireless ISP ............................................................................................................... 64 4.2 System Configuration ............................................................................................................ 80 4.2.1 Device IP Settings ...................................................................................................... 80 4.2.2 Time Settings .............................................................................................................. 81 4.2.3 Password Settings...................................................................................................... 82 4.2.4 System Management ................................................................................................. 83 4.2.5 Ping Watchdog ........................................................................................................... 84 4.2.6 Firmware Upgrade...................................................................................................... 85 4.2.7 Save and Restore ....................................................................................................... 85 4.2.8 Factory Default ........................................................................................................... 86 4.2.9 Reboot ........................................................................................................................ 86 4.2.10 Schedule Reboot ...................................................................................................... 87 4.3 Tools ....................................................................................................................................... 88 4.3.1 Network Ping .............................................................................................................. 88 4.3.2 Network Traceroute .................................................................................................... 89 4.4 Device Status ...................................…

Text truncated - open the document above for the full version.

Loopcomm Technology,.Inc. 6F., No.236, Bo'ai St., Shulin Dist., New Taipei City 23845 Taiwan Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Date: November 12, 2014 To whom it may concern: We, the undersigned, hereby authorize Worldwide Testing Services (Taiwan) Co., Ltd to act on our behalf in all matters relating to applications for equipment authorization FCC ID:VYT-LP2396K including the signing of all documents related to these matters. Any and all acts carried out by Worldwide Testing Services (Taiwan) Co., Ltd on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Name: Jane Lee Title: Sales VP Company: Loopcomm Technology,.Inc. .

Loopcomm Technology, Ltd. 6F., No. 236, Bo'ai St., Shulin Dist., New Taipei City 23845 Taiwan Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Date: 2015-03-24 Request for Confidentiality Company name: Loopcomm Technology,.Inc. FCC ID:VYT-LP2396K FCC Part 15 Certification To whom it may concern: In accordance with 0.459 of CFR 47, Loopcomm Technology,.Inc. hereby requests confidentiality of all Block Diagrams, Schematics, Operational Description attachments for the subject application. These documents contain detailed system and equipment description and related information about the product which Loopcomm Technology,.Inc. considers to be proprietary, confidential and a custom design and otherwise would not release to the general public. Since the design is a basis from which future technological products will evolve, Loopcomm Technology,.Inc. considers that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Title: Sales VP Company: Loopcomm Technology,.Inc.

Registration number: W6M21409-14505-FCC FCC ID: VYT-LP2396K Worldwide Testing Services(Taiwan) Co., Ltd. Appendix Page 2 of 25 External Photos Registration number: W6M21409-14505-FCC FCC ID: VYT-LP2396K Worldwide Testing Services(Taiwan) Co., Ltd. Appendix Page 3 of 25 Registration number: W6M21409-14505-FCC FCC ID: VYT-LP2396K Worldwide Testing Services(Taiwan) Co., Ltd. Appendix Page 4 of 25 Registration number: W6M21409-14505-FCC FCC ID: VYT-LP2396K Worldwide Testing Services(Taiwan) Co., Ltd. Appendix Page 5 of 25 Registration number: W6M21409-14505-FCC FCC ID: VYT-LP2396K Worldwide Testing Services(Taiwan) Co., Ltd. Appendix Page 6 of 25 Registration number: W6M21409-14505-FCC FCC ID: VYT-LP2396K Worldwide Testing Services(Taiwan) Co., Ltd. Appendix Page 7 of 25 Registration number: W6M21409-14505-FCC FCC ID: VYT-LP2396K Worldwide Testing Services(Taiwan) Co., Ltd. Appendix Page 8 of 25 Registration number: W6M21409-14505-FCC FCC ID: VYT-LP2396K Worldwide Testing Services(Taiwan) Co., Ltd. Appendix Page 9 of 25 Registration number: W6M21409-14505-FCC FCC ID: VYT-LP2396K Worldwide Testing Services(Taiwan) Co., Ltd. Appendix Page 10 of 25

Registration number: W6M21409-14505-FCC FCC ID: VYT-LP2396K Worldwide Testing Services(Taiwan) Co., Ltd. Appendix Page 11 of 25 Internal Photos Registration number: W6M21409-14505-FCC FCC ID: VYT-LP2396K Worldwide Testing Services(Taiwan) Co., Ltd. Appendix Page 12 of 25 Registration number: W6M21409-14505-FCC FCC ID: VYT-LP2396K Worldwide Testing Services(Taiwan) Co., Ltd. Appendix Page 13 of 25 Registration number: W6M21409-14505-FCC FCC ID: VYT-LP2396K Worldwide Testing Services(Taiwan) Co., Ltd. Appendix Page 14 of 25

Loopcomm Technology,.Inc. 6F., No.236, Bo'ai St., Shulin Dist., New Taipei City 23845 Taiwan Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Applicant’s declaration concerning RF Radiation Exposure We hereby indicate that the product Product description: Outdoor 2.4GHz Wireless AP/CPE/Bridge Model No: LP-2396K The equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The integral antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within the host device. A safety statement concerning minimum separation distances from enclosure of the Product : Outdoor 2.4GHz Wireless AP/CPE/Bridge will be integrated in the user’s manual to provide end-users with transmitter operating conditions for satisfying RF exposure compliance. The appropriate information can be drawn from the test report no: W6M21409-14505-C-1 and the accompanying calculations. Company: Loopcomm Technology,.Inc. Address: 6F., No.236, Bo'ai St., Shulin Dist., New Taipei City 23845 Taiwan Date: 2014/11/12 Registration number: W6M21409-14505-C-1 FCC ID: VYT-LP2396K Worldwide Testing Services(Taiwan) Co., Ltd. Page 26 of 72 3.2 Equivalent isotropic radiated power FCC Rule: 15.247(b)(3) For systems using digital modulation in the 2.4 GHz – 2.4835 GHz bands: 1 Watt. The conducted output power limit specified in paragraph (b) of this section is based on the use of antennas with directional gains that do not exceed 6dBi. Except as shown in paragraph (c) of this section, if transmitting antennas of directional gain greater than 6 dBi are used, the conducted output power from the intentional radiator shall be reduced below the stated values in paragraphs (b)(1), (b)(2), and (b)(3) of this section, as appropriate, by the amount in dB that the directional gain of the antenna exceeds 6 dBi. Test equipment used: ETSTW-RE 055 3.3 RF Exposure Compliance Requirements Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.25 m normally can be maintained between the user and the device. 3.3.1 MPE Calculation Method Registration number: W6M21409-14505-C-1 FCC ID: VYT-LP2396K Worldwide Testing Services(Taiwan) Co., Ltd. Page 27 of 72 E ＝ Electric field (V/m) P ＝ output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance between radiator and human body (m) The formula can be changed to Frequency Max output power (W) Antenna Gain Power Density(S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 802.11n(40MHz) (2422MHz) 0.2148 15.01 0.87 1.0 Complies From the peak EUT RF output power, the minimum mobile separation distance, d=0.25 m, as well as the gain of the used antenna, the RF power density can be obtained. Registration number: W6M21409-14505-C-1 FCC ID: VYT-LP2396K Worldwide Testing Services(Taiwan) Co., Ltd. Page 28 of 72 3.4 Transmitter Radiated Emissions in Restricted Bands FCC Rules: 15.247 (c), 15.205, 15.209, 15.35 Radiated emission measurements were performed from 30 MHz to 26500 MHz. For radiated emission tests, the analyzer setting was as followings: Frequency ≦ 1 GHz, RBW:100 kHz, VBW: 100 kHz (Peak measurements) Frequency ＞1 GHz, RBW: 1 MHz, VBW: 1 MHz (Peak measurements) Frequency ＞1 GHz , RBW:1 MHz , VBW: 10 Hz (Average measurements) Limits. For frequencies below 1GHz: Frequency of Emission (MHz) Field strength (microvolts/meter) Field Strength (dB microvolts/meter) 30 - 88 10040.0 88 - 216 15043.5 216 - 960 20046.0 Above 50054.0 For frequencies above 1GHz (Average measurements). Guidance on Measurement of Digit Transmission Systems: “If the emission is pulsed, modify the unit for continuous operation, use the setting shown above, then correct the reading by subtracting the peak-average correction factor, derived from the appropriate duty cycle calculation.” The correction factor, based on the total channel dwell time in a 100 ms period, may be mathematically applied to a measurement made with an average detector, to further reduce the value. Duty cycle correction = 20 log (dwell time/ 100ms) Note: No duty cycle correction was added to the reading of this EUT. Explanation: see attached diagrams in Appendix.

of Applicant: Loopcomm Technology,.Inc. Address: 6F., No. 236, Bo'ai St., Shulin Dist., New Taipei City 23845 Taiwan Tested and Prepared by Worldwide Testing Services (Taiwan) Co., Ltd. FCC Registration No.: 930600 Industry Canada filed test laboratory Reg. No. IC 5679A-1 A2LA Accredited No.: 2732.01 Report No.: W6M21409-14505-C-1 6F, NO. 58, LANE 188, RUEY-KUANG RD., NEIHU TAIPEI 114, TAIWAN, R.O.C. TEL: 886-2-66068877 FAX: 886-2-66068879 E-mail: [email protected] FCC PART 15 SUBPART C TEST REPORT for Outdoor 2.4GHz Wireless AP/CPE/Bridge Model No.: LP-2396K FCC ID: VYT-LP2396K Registration number: W6M21409-14505-C-1 FCC ID: VYT-LP2396K Worldwide Testing Services(Taiwan) Co., Ltd. Page 1 of 72 TABLE OF CONTENTS 1 GENERAL INFORMATION ..........................................................................................................2 1.1 N OTES..........................................................................................................................................2 1.2 TESTING LABORATORY................................................................................................................3 1.2.1 Location ..............................................................................................................................3 1.2.2 Details of accreditation status ............................................................................................3 1.3 DETAILS OF APPROVAL HOLDER...................................................................................................3 1.4 A PPLICATION DETAILS.................................................................................................................4 1.5 G ENERAL INFORMATION OF TEST ITEM........................................................................................4 1.6 T EST STANDARDS.........................................................................................................................6 2 TECHNICAL TEST .........................................................................................................................7 2.1 SUMMARY OF TEST RESULTS........................................................................................................7 2.2 TEST ENVIRONMENT....................................................................................................................7 2.3 TEST EQUIPMENT LIST.................................................................................................................8 2.4 GENERAL TEST PROCEDURE......................................................................................................10 3 TEST RESULTS (ENCLOSURE) ................................................................................................12 3.1 P EAK OUTPUT POWER (TRANSMITTER) ......................................................................................13 3.2 EQUIVALENT ISOTROPIC RADIATED POWER................................................................................26 3.3 RF EXPOSURE COMPLIANCE REQUIREMENTS............................................................................26 3.3.1 MPE CALCULATION METHOD...............................................................................................26 3.4 TRANSMITTER RADIATED EMISSIONS IN RESTRICTED BANDS....................................................28 3.5 S PURIOUS EMISSIONS (TX) .........................................................................................................29 3.6 RADIATED EMISSION ON THE BAND EDGE..................................................................................32 3.7 MINIMUM 6 DB BANDWIDTH.....................................................................................................41 3.8 P EAK POWER SPECTRAL DENSITY.............................................................................................54 3.9 RADIATED EMISSION FROM DIGITAL PART................................................................................67 3.9 P OWER LINE CONDUCTED EMISSION.........................................................................................68 A PPENDIX..............................................................................................................................................72 Registration number: W6M21409-14505-C-1 FCC ID: VYT-LP2396K Worldwide Testing Services(Taiwan) Co., Ltd. Page 2 of 72 1 General Information 1.1 Notes The purpose of conformity testing is to increase the probability of adherence to the essential requirements or conformity specifications, as appropriate. The complexity of the technical specifications, however, means that full and thorough testing is impractical for both technical and economic reasons. Furthermore, there is no guarantee that a test sample which has passed all the relevant tests conforms to a specification. Neither is there any guarantee that such a test sample will interwork with other genuinely open systems. The existence of the tests nevertheless provides the confidence that the test sample possesses the qualities as maintained and that is performance generally conforms to representative cases of communications equipment. The test results of this test report relate exclusively to the item tested as specified in 1.5. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the Worldwide Testing Services(Taiwan) Co., Ltd. Specific Conditions: Usage of the hereunder tested device in combination with other integrated or external antennas requires at least additional output power measurements, spurious emission measurements, conducted emission measurements (AC supply lines) and radio frequency exposure evaluations for each individual configuration performed, for certification by FCC. The test sample is able to work according IEEE 802.11 b/g/n. This report is related to FCC Part 15 C (DSSS and OFDM device). Tester: February 16, 2015 Kent…

Text truncated - open the document above for the full version.

Registration number: W6M21409-14505-FCC FCC ID: VYT-LP2396K Worldwide Testing Services(Taiwan) Co., Ltd. Appendix Page 22 of 25 Set Up Photo of Radiated Emission EMI Below 1GHz Registration number: W6M21409-14505-FCC FCC ID: VYT-LP2396K Worldwide Testing Services(Taiwan) Co., Ltd. Appendix Page 23 of 25 Above 1GHz Registration number: W6M21409-14505-FCC FCC ID: VYT-LP2396K Worldwide Testing Services(Taiwan) Co., Ltd. Appendix Page 24 of 25 RF Registration number: W6M21409-14505-FCC FCC ID: VYT-LP2396K Worldwide Testing Services(Taiwan) Co., Ltd. Appendix Page 25 of 25 Set Up Photo of Conducted Emission