W2Y-SLI2CPM6Electronic Furniture Lock

Content Page General system description / Operating description .......................................................2 Safety precautions / Care & maintenance / Technical specifications ..............................3 System components & package contents ........................................................................4 Dimensions ......................................................................................................................5 Getting started & changing battery .................................................................................6 Emergency power supply / Installing the bolt protector .................................................7 Mounting the locking system ..........................................................................................8 Structure of the keypad TA03 ..........................................................................................9 Bolt end position scan function / Factory settings / Opening & closing in Free Code mode ............................................................................................................10 Switching to Fixed Code mode / Opening & Closing in Fixed Code mode .....................11 User changes the Fixed Code / Switching to Free Code mode ......................................12 Changing the master code .............................................................................................13 Changing the emergency opening code ........................................................................14 Emergency opening / Reset to factory settings .............................................................15 Automatic locking in Fixed Code mode .........................................................................16 Automatic opening in Free Code mode .........................................................................17 Activation and deactivation of acoustis signals / Configuration of M410 TA03 PRO with NFC app .................................................................................................................18 Battery warning .............................................................................................................19 Firmware update / Disposal ..........................................................................................20 www.lehmann-locks.com Operating Instructions GB M410 Keypad lock (M410 TA03 / M410 TA03 pro) BDA M410 TA03 / M410 TA03 pro / 2023-12-07 (GB) BDA M410 TA03 / M410 TA03 pro / 2023-12-07 (GB) 2 GENERAL SYSTEM DESCRIPTION The M410 TA03 / M410 TA03 pro (keypad) locking system is a furniture lock with a motor-driven locking bolt intended for use in the home and office. The lock M410 TA03 pro can be configured either manually or with the LEHMANN Config app on a smartphone. This manual gives you information in order to install and operate the locking system correctly. Keep the operating instructions in an easily accessible place. Using the locking system in applications for which it is not intended may result in irreparable damage to it and render any claims null and void. Wording and graphics have been prepared for you with care. However, no liability will be assumed for any mistakes that may have occurred. The scope of items included by the manufacturer in the system as well as technical specifications are subject to change without notice. These instructions must not be reproduced in any way (print, photocopy, etc.) either in whole or in part without written consent from LEHMANN Vertriebsgesellschaft mbH & Co. KG. IMPORTANT: Only install the locking system when it is unlocked. For the correct mechanical connection of the locking system to your furniture, please refer to the installation instructions of your furniture manufacturer. Perform all programming operations and functional checks when the cabinet door is open. In the event of a malfunction, you thus have access to all system components. OPERATING DESCRIPTION The electronic locking system provides you with a convenient means of locking and unlocking your furniture electronically. The system has two operating modes. Operating mode 1: Free Code The user selects his own individual code (3 to 10 digits) for opening and closing the lock. In this mode, the code memory is deleted again as soon as the user opens his cabinet. This means that the next user can select his new individual code. Operating mode 2: Fixed Code The user can only open and close the lock with a fixed preset code (3 to 10 digits). FCC Comliance Statemant This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution! Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are deåsigned to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult …

Text truncated - open the document above for the full version.

Content Page General system description / Operating description .......................................................2 Safety precautions / Care & maintenance / Technical specifications ..............................3 System components & package contents ........................................................................4 Dimensions ......................................................................................................................5 Getting started & changing batteries / Emergency power supply ...................................6 Installing the locking system... .........................................................................................7 Structure of the keypad TA03 / Bolt end position scan function .....................................9 Factory settings / Opening & closing in Free Code mode. .............................................10 Switching to Fixed Code mode / Opening and closing in Fixed Code mode ..................11 User changes the Fixed Code / Switching to Free Code mode ......................................12 Changing the master code .............................................................................................13 Changing the emergency opening code ........................................................................14 Emergency opening / Reset to factory settings .............................................................15 Automatic locking in Fixed Code mode... ......................................................................16 Automatic opening in Free Code mode .........................................................................17 Activation and deactivation of acoustic signals / Configuration of M610 TA03 pro with NFC-App ................................................................................................................18 Battery warning .............................................................................................................19 Firmware update / Disposal ..........................................................................................20 www.lehmann-locks.com Operating Instructions GB Locker lock M610 with keypad (M610 TA03 / M610 TA03 pro) BDA M610 TA03 / M610 TA03 pro / 2023-12-07 (GB) BDA M610 TA03 / M610 TA03 pro / 2023-12-07 (GB) 2 GENERAL SYSTEM DESCRIPTION The M610 TA03 / M610 TA03 pro (keypad) locking system is a locker lock with a motor-driven locking bolt intended for use in the home and office. The lock M610 TA03 pro can be configured either manually or with the LEHMANN Config app on a smartphone. This manual gives you information in order to install and operate the locking system correctly. Keep the operating instructions in an easily accessible place. Using the locking system in applications for which it is not intended may result in irreparable damage to it and render any claims null and void. Wording and graphics have been prepared for you with care. However, no liability will be assumed for any mistakes that may have occurred. The scope of items included by the manufacturer in the system as well as technical specifications are subject to change without notice. These instructions must not be reproduced in any way (print, photocopy, etc.) either in whole or in part without written consent from LEHMANN Vertriebsgesellschaft mbH & Co. KG. IMPORTANT: Only install the locking system when it is unlocked. For the correct mechanical connection of the locking system to your locker, please refer to the installation instructions of your locker manufacturer. Perform all programming operations and functional checks when the locker door is open. In the event of a malfunction, you thus have access to all system components. OPERATING DESCRIPTION The electronic locking system provides you with a convenient means of locking and unlocking your locker electroni- cally. The system has two operating modes. Operating mode 1: Free Code The user selects his own individual code (3 to 10 digits) for opening and closing the lock. In this mode, the code memory is deleted again as soon as the user opens his locker. This means that the next user can select his new individual code. Operating mode 2: Fixed Code The user can only open and close the lock with a fixed preset code (3 to 10 digits). FCC Comliance Statemant This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution! Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are deåsigned to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. BDA M610 TA03 / M610 TA03 pro / 2023-12-07 (GB) 3 Power supplyBattery type: 2 x CR123A Operating temperature-5 °C to +60 °C Storage temparature-25 °C to +70 °C Type designationLoc…

Text truncated - open the document above for the full version.

Long/Short-term Confidentiality Request To: Federal Communications Commission 02-MAY-2024 7435 Oakland Mills Road Columbia, MD 21046 USA FCC ID: W2Y-SLI2CPM6 To Whom It May Concerns, Pursuant to sections 0.457(d) and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the Grantee hereby requests long-term confidential treatment of information accompanying this application as outlined below: ☒ Schematics ☒ Parts List ☒ Block Diagram ☐ Tune-Up Info ☒ Operational Description In addition, the Grantee requests the following exhibits contained in this application to be temporarily (short-term confidentiality) withheld from the public disclosure ☐ for an initial period of days ☐ until: ☒ not applicable ☐ External Photos ☐ Test Setup Photos ☐ Internal Photos ☐ Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457(d), disclosure of this application and all accompanying documentation will not be made before the date of the GRANT for this application. If you have any questions, please feel free to contact me. Yours sincerely, RECD Assistant and authorized agent

External Photos (Variant) M610 TA pro (All photos provided by Grantee) Top Side – M610 TA pro Bottom Side with cover – M610 TA pro

Lable Location Information

Lable Location Information (Variant) M610 TA pro

Annex C: Internal Photos Examiner:Sebastian KREHSReport Number: F231927E1 Date of issue: 02.05.2024Order Number: 23-111927page 1 of 5 Keypad TA03 – cabinet opened Keypad TA03 – PCB and keypad, view 1 Annex C: Internal Photos Examiner:Sebastian KREHSReport Number: F231927E1 Date of issue: 02.05.2024Order Number: 23-111927page 2 of 5 Keypad TA03 – PCB and keypad, view 2 Lock M410 TA pro – cabinet opened Annex C: Internal Photos Examiner:Sebastian KREHSReport Number: F231927E1 Date of issue: 02.05.2024Order Number: 23-111927page 3 of 5 Lock M410 TA pro – PCB 1, view 1 Lock M410 TA pro – PCB 1, view 2 Annex C: Internal Photos Examiner:Sebastian KREHSReport Number: F231927E1 Date of issue: 02.05.2024Order Number: 23-111927page 4 of 5 Lock M410 TA pro – PCB 2, view 1 Lock M410 TA pro – PCB 2, view 2 Annex C: Internal Photos Examiner:Sebastian KREHSReport Number: F231927E1 Date of issue: 02.05.2024Order Number: 23-111927page 5 of 5 Lock M410 TA03 pro – PCB 3

Internal Photos (Variant) M610 TA pro (All photos provided by Grantee)

Königswinkel 10 32825 Blomberg, Germany Phone: +49 (0) 52 35 / 95 00-0 Fax: +49 (0) 52 35 / 95 00-10 [email protected] www.phoenix-testlab.de Test Report Report Number: F231927E1 Equipment under Test (EUT): Keypad TA03 with lock M410 TA pro Applicant: Martin Lehmann GmbH & Co. KG Manufacturer: Martin Lehmann GmbH & Co. KG Examiner: Sebastian KREHS Report Number: F231927E1 Date of Issue: 02.05.2024 Order Number: 23-111927 Page 2 of 15 References [1] ANSI C63.4:2014 American National Standard for Methods of Measuring of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. [2] FCC 47 CFR Part 2: General Rules and Regulations [3] FCC 47 CFR Part 15: Radio Frequency Devices (Subpart B) [4] ICES-003 Issue 7: (October 2020) Spectrum Management and Telecommunications. Interference-Causing Equipment Standard. Information Technology Equipment (Including Digital Apparatus) —Limits and Methods of Measurement Examiner: Sebastian KREHS Report Number: F231927E1 Date of Issue: 02.05.2024 Order Number: 23-111927 Page 3 of 15 Test Result The requirements of the tests performed as shown in the overview (clause 4) were fulfilled by the equipment under test. The complete test results are presented in the following. “Passed” indicates that the equipment under test conforms with the relevant limits of the testing standard without taking any measurement uncertainty into account as stated in clause 10.2.8.2 of ANSI C63.4 (2014). However, the measurement uncertainty is calculated and shown in this test report. T h i s t e s t r e p o r t i s o n l y v a l i d i n i t s o r i g i n a l f o r m. Any reproduction of its contents in extracts without written permission of the accredited test laboratory PHOENIX TESTLAB GmbH is prohibited. The test results herein refer only to the tested sample. PHOENIX TESTLAB GmbH is not responsible for any generalisations or conclusions drawn from these test results concerning further samples. Any modification of the tested samples is prohibited and leads to the invalidity of this test report. Each page necessarily contains the PHOENIX TESTLAB Logo and the TEST REPORT NUMBER. Tested and written by: Signature Reviewed and approved by: Signature Examiner: Sebastian KREHS Report Number: F231927E1 Date of Issue: 02.05.2024 Order Number: 23-111927 Page 4 of 15 Contents: Page Identification ................................................................................................................................. 5 1.1 Applicant ................................................................................................................................................... 5 1.2 Manufacturer ............................................................................................................................................ 5 1.3 Test Laboratory ........................................................................................................................................ 5 1.4 EUT (Equipment under Test) ................................................................................................................... 6 1.5 Technical Data of Equipment ................................................................................................................... 7 1.6 Dates ........................................................................................................................................................ 7 Operational States ........................................................................................................................ 8 Additional Information ................................................................................................................... 8 Overview ....................................................................................................................................... 9 Results........................................................................................................................................ 10 5.1 Test setups ............................................................................................................................................. 10 5.1.1 Radiated: 30 MHz to 1 GHz ........................................................................................................... 10 5.1.1.1 Preliminary and final measurement 30 MHz to 1 GHz 10 5.2 Radiated emissions ................................................................................................................................ 12 5.2.1 Test setup (Maximum unwanted emissions) ................................................................................. 12 5.2.2 Test method (Maximum unwanted emissions) .............................................................................. 12 5.2.3 Test results (Maximum unwanted emissions) ............................................................................... 12 5.2.3.1 Preliminary and final measurement result 30 MHz to 1 GHz 12 Measurement Uncertainties ........................................................................................................ 14 Test Equipment used for Tests ................................................................................................... 14 Test site Verification .................................................................................................................... 14 Report History ............................................................................................................................. 15 List of Annexes ........................................................................................................................... 15 Examiner: Sebastian KREHS Report Number: F231927E1 Date of Issue: 02.05.2024 Order Number: 23-111927 Page 5 of 15 Identification 1.1 Applicant Name: Martin Lehmann GmbH & Co. KG Address: Uphauser Weg 82, 32429 Minden Country: Germany Name for contact purposes: - Phone: 0571-…

Text truncated - open the document above for the full version.

Annex A Test setup photos Examiner:Sebastian KREHSReport Number: F231927E1 Date of issue: 02.05.2024Order Number: 23-111927page 1 of 1 Test setup semi-anechoic chamber M276, 30 MHz – 1 GHz