WFZSCND902H1235FilmScan35 II-Professional-2.4

FilmScan35 Professional -Patent pending- User Manual Version 1.01 April 2010 Index I. Unpack FilmScan35 Professional Scanner.............................2 II. Install film into the film holder.............................................3 III. Quick Start..........................................................................7 IV. Operation Guide................................................................12 V. Specification......................................................................37 -1- I. Unpack FilmScan35 Professional FilmScan35 Professional Negative/Slide Film Holder User Manual USB power core USB/Video cable Roll Film Holder Clean brush Note  We strongly suggest using a clean, dry, non-alcohol cotton swab to clean the glass surface periodically to produce a clear image during operation.  Clean dust from FilmScanner back light, to use the clean brush to wipe the dust.  Dust or dirt from the negative, slide films and cover trays may affect the scanned image quality, please make sure the materials are cleaned before inserting into the scanner.  Please find recommend, processional purger from photo store to clean the dust on films if any to avoid damaging the only one copy of old films. -2- II. Install film into the film holder ● Install the Slide into holder 1. Open the slide holder as illustrated 2. Put slide into positive slide slot 3. Close the film holder ● Install the Negative Film into holder 1. Open the film holder as illustrated -3- 2. Install film into negative film slot 3. Close the film holder ● Install the Roll Film into holder: 1. Take out the roll film holder from package 2. Insert roll film into film slot 3. Pull out the roll film in another side -4- Note  To avoid mirror image, follow the serial numbers (from left to right) on top of film when install negative film into holder  If the image is upside down [see fig.2], the image can be corrected by Flip function in hard key of device before capture, or enter playback edit menu after capture [see fig.3 and fig.4]. -5- Figure 1 Figure 2 ● Press hard key on top of device in live view Figure 3 ● Playback mode menu Figure 4 -6- <Up> then <Down> button to perform Flip (Flip hard key) Flip III. Quick Start -7- Right/+ button Film Slot OK button SD card Slot Left/- button Power button USB port TV out jack Power status LED 1. Put Film onto the film cartridge 2. Insert the film cartridge into FilmScan35 Professional -8- 3. Connect USB cable to FilmScan35 Professional 4. Turn on Device by power button -9- 5. Press OK button to capture the image 6. Follow the menu on display for scanning -10- 7. After finished the capture, take out the SD card which stored capture images 8. Or read picture from PC by MSDC mode -11- IV. Operation Guide Home: Main menu ● Capture: capture mode (default) ● Playback: playback mode ● Film Type: define the film type which loaded in cartridge ● USB mode: MSDC (Mass Storage Device Class) mode ● Setting: TV out and format option 1. Capture After welcome page, above menu will remains for 5 sec. User can press up/down button for desired menu. Or system will auto enter Capture mode if there is no action during this 5 second period. -12- Capture Playback Film Type USB mode Setting Capture 1.1 Capture: <Up>/<Down> (Hard Key) ● Press <Up> button to enter Mirror/Flip adjustment (see Chapter 1.2) ● Press <Down> button to enter Brightness/Color adjustment (see Chapter 1.3) -13- <Up> Right/Up <Down> Left/Down <Up> <Down> <OK> Go Next button 1.2 Capture: <Up>/<Down> - Mirror/Flip (Hard Key) ● Press <Up> button to change image left to right ● Press <Down> button to upside down image -14- <Up> Right/Up <Down> Left/Down <Up> <Down> <OK> Go Back to 1.1Capture button 1.3 Capture: <Up>/<Down> - Brightness/Color (Hard Key) ● Press <Up> button to enter Brightness adjustment (See Chapter 1.4) ● Press <Down> button to enter Color adjustment (See Chapter 1.5) -15- <Up> Right/Up <Down> Left/Down <Up> <Down> <OK> Go Back to 1.1Capture button 1.4 Capture: <Up>/<Down> - Brightness (Hard Key) ● Press <Up> button to increase Brightness with ranges of -3 to 3 ● Press <Down> button to decrease Brightness with ranges of -3 to 3 -16- <Up> Right/Up <Down> Left/Down <Up> <Down> <OK> Go Back to 1.1Capture button 1.5 Capture: <Up>/<Down> - Color Red (Hard Key) ● Press <Up> button to increase red color with ranges of -3 to 3 ● Press <Down> button to decrease red color with ranges of -3 to 3 -17- <Up> Right/Up <Down> Left/Down <Up> <Down> <OK> Go Next to Color Green button 1.6 Capture: <Up>/<Down> - Color Green (Hard Key) ● Press <Up> button to increase green color with ranges of -3 to 3 ● Press <Down> button to decrease green color with ranges of -3 to 3 -18- <Up> Right/Up <Down> Left/Down <Up> <Down> <OK> Go Next to Color Blue button 1.7 Capture: <Up>/<Down> - Color Blue (Hard Key) ● Press <Up> button to increase blue color with ranges of -3 to 3 ● Press <Down> button to decrease blue color with ranges of -3 to 3 -19- <Up> Right/Up <Down> Left/Down <Up> <Down> <OK> Go Back to 1.1Capture button 1.8 Capture mode Once enter capture mode, there will be a red indicator on left top corner to indicate it is in live view mode. When the film cartridge is inserted into the scanner slot, the image always shows the positive image according to previous defined Film Type (after power on. the Film Type is default to negative film). Reconfirm the film position through the display before press OK button. 1.9 Capture: Edit Menu ● Save: save captured image ● Rotate +90: continue rotate +90 degrees ● Rotate -90: continue rotate -90 degrees (this is for adjusting the user who took the portrait picture) ● Cancel: cancel any editing with this image ● Home: Back to main menu -20- Live view indicator (flashing at 0.5sec rate) Save Rotate +90 Cancel Rotate -90 Home Selected image 1.10 Live View -> Capture/Edit Menu Live View Capture/Edit Menu OK OK Once press OK button in live view, the edit menu will be appeared. When user press OK button again, …

Text truncated - open the document above for the full version.

Rev. 1/1/03 EU3C Company Limited Unit7, 8/F., Austin Tower, 22-26 Austin Avenue, Tsim Sha Tsui, Kowloon, Hong Kong Tel: 852-2302-4811 Fax: 852-2302-4911 Date: December 23, 2010 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: WFZSCND902H1235 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Schematics (file: SCND902H1235_Schem.pdf) Block Diagram (file: SCND902H1235_BlkDia.pdf) Operation Description (file: SCND902H1235_OpDes.pdf) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ________________ Letty Lee

FCC TEST REPORT Report No. : FV0O0901 APPENDIX A. Photographs of EUT FOR SPORTON International Inc. PAGE NUMBER : A1 OF A1 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A2 OF A2 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A3 OF A3 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A4 OF A4 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A5 OF A5 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A6 OF A6 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A7 OF A7 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A8 OF A8 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255

FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A9 OF A9 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A10 OF A10 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A11 OF A11 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A12 OF A12 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A13 OF A13 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A14 OF A14 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A15 OF A15 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A16 OF A16 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A17 OF A17 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A18 OF A18 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A19 OF A19 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A20 OF A20 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A21 OF A21 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A22 OF A22 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A23 OF A23 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A24 OF A24 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A25 OF A25 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. PAGE NUMBER : A26 OF A26 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255

FCC TEST REPORT Report No. : FV0O0901 SPOR T ON International Inc. TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT for 47 CFR FCC Rules and Regulations Part 15 Subpart B, Class B Digital Equipment : FilmScan35 II-Professional-2.4 Model No. : SCND902H1235 FCC ID : WFZSCND902H1235 Filing Type : Certification Applicant : EU3C Company Limited Unit7, 8/F., Austin Tower, 22-26 Austin Avenue, Tsim Sha Tsui, Kowloon, Hong Kong  The test result refers exclusively to the test presented test model / sample.  Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full.  Certificate or Test Report must not be used by the applicant to claim the product in this test report endorsement by TAF. SPORTON International Inc. 6F, No.106, Sec. 1, Hsin Tai Wu Rd., Hsi Chih, Taipei Hsien, Taiwan, R.O.C. FCC TEST REPORT Report No. : FV0O0901 SPOR T ON International Inc. FCC ID : WFZSCND902H1235 TEL : 886-2-2696-2468 Page No. : i FAX : 886-2-2696-2255 Issued Date : Dec. 06, 2010 Table of Contents History of this test report....................................................................................................................................ii CERTIFICATE OF COMPLIANCE........................................................................................................................1 1. General Description of Equipment under Test.............................................................................................2 1.1. Applicant..........................................................................................................................................................................................2 1.2. Manufacturer...................................................................................................................................................................................2 1.3. Basic Description of Equipment under Test....................................................................................................................................2 1.4. Feature of Equipment under Test ...................................................................................................................................................2 2. Test Configuration of Equipment under Test...............................................................................................3 2.1. Test Manner....................................................................................................................................................................................3 2.2. Description of Test System.............................................................................................................................................................3 2.3. Connection Diagram of Test System..............................................................................................................................................5 3. Test Software...................................................................................................................................................6 4. General Information of Test............................................................................................................................7 4.1. Test Facility.....................................................................................................................................................................................7 4.2. Test Voltage....................................................................................................................................................................................7 4.3. Standard for Methods of Measurement...........................................................................................................................................7 4.4. Test in Compliance with..................................................................................................................................................................7 4.5. Frequency Range Investigated.......................................................................................................................................................7 4.6. Test Distance..................................................................................................................................................................................7 5. Test of Conducted Powerline.........................................................................................................................8 5.1. Major Measuring Instruments..........................................................................................................................................................8 5.2. Test Procedures..............................................................................................................................................................................8 5.3. Typical Test Setup Layout of Conducted Powerline.......................................................................................................................9 5.4. Test Result of AC Powerline Conducted Emission.......................................................................................................................10 6. Test of Radiated Emission............................................................................................................................12 6.1. Major Measuring Instruments........................................................................................................................................................12 6.2. Test Procedures............................................................................................................................................................................13 6.3. Typical Test Setup Layout of Radiated Emission.......................................................................…

Text truncated - open the document above for the full version.

FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. FCC ID : N/A TEL : 886-2-2696-2468 Page No. : 1/3 FAX : 886-2-2696-2255 Issued Date : Dec. 06, 2010 1.1 Photographs of Conducted Powerline Test Configuration  The photographs show the configuration that generates the maximum emission. FRONT VIEW REAR VIEW FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. FCC ID : N/A TEL : 886-2-2696-2468 Page No. : 2/3 FAX : 886-2-2696-2255 Issued Date : Dec. 06, 2010 SIDE VIEW FCC TEST REPORT Report No. : FV0O0901 SPORTON International Inc. FCC ID : N/A TEL : 886-2-2696-2468 Page No. : 3/3 FAX : 886-2-2696-2255 Issued Date : Dec. 06, 2010 1.2 Photographs of Radiated Emission Test Configuration  The photographs show the configuration that generates the maximum emission. FRONT VIEW REAR VIEW