WIYV1P35001POS Terminal

CASTLES TECHNOLOGY VEGA1000 POS Terminal Book 2 User Manual V1P 3.5 Confidential Version 1.1 Mar 2025 CRT-V1-02-02-V1.1-CE-CB Castles Technology Co., Ltd. 6F, No. 207-5, Sec. 3, Beixin Rd., Xindian District, New Taipei City 23143, Taiwan R.O.C. http://www.castech.com.tw Castles Technology Co., Ltd. Confidential • All Right Reserved.Pg. 2 WARNING No part of this publication may be reproduced, transmitted, stored in a retrieval system, nor translated into any human or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Castles Technology Co., Ltd. All trademarks mentioned are proprietary of their respective owners. Castles Technology Co., Ltd. Confidential • All Right Reserved.Pg. 3 Revision History Version Date Descriptions 1.0 Oct 17, 2024 Initial creation. 1.1 Mar 11, 2025 Modify cover page, warning page, CH1. Add CH3. Castles Technology Co., Ltd. Confidential • All Right Reserved.Pg. 4 Contents 1. Introduction ...................................................................................................................... 5 2. Hardware Setup ............................................................................................................... 6 2.1. Parts of the Terminal ............................................................................................... 6 2.2. Inserting the SAM Card ........................................................................................... 9 3. Appendix ........................................................................................................................ 10 3.1. IEC 62368-1 .......................................................................................................... 10 Castles Technology Co., Ltd. Confidential • All Right Reserved.Pg. 5 1. Introduction This document provides a guideline on operating and configuring Castles VEGA1000 terminal. The scope of this document includes setting up the terminal, basic operation, application life cycle, and some advance features. Regulatory instruction of usage  Before using the terminal, please check has it been disassembled, modified, or showed abnormal situation. If yes, please do not use.  Please stay away from strong electromagnetic waves. (Example) Microwave ovens, magnets, shoplifting prevention devices, high-voltage wires, automatic doors, communication antennas, etc.  Condensation can occur when moving from a cold place to a warm place. If condensation occurs, do not use the unit until the connected water droplets evaporate.  Static electricity may occur in some places (such as where you use a carpet).  Please do not leave it in the sun for a long time.  Please operate the unit carefully as it is a precision instrument. Do not apply impact, drop or heavy objects on top of the unit  Do not attach dust, oil, etc. to a part of the power terminal. Also, please do not scratch.  The equipment is only suitable for mounting wall at height≦2m.  This product is not intended for use by children and is not suitable for environments accessible to children. Install and operate this product out of reach of children. Castles Technology Co., Ltd. Confidential • All Right Reserved.Pg. 6 2. Hardware Setup 2.1. Parts of the Terminal Front 1. Front Camera 2. LCD Display (Color TFT) 3. Contactless Card Landing Zone 4. Private Shield 5. Keypad 6. Smart Card Reader 7. Magnetic Stripe Reader V1P 1 2 3 4 5 6 7 Castles Technology Co., Ltd. Confidential • All Right Reserved.Pg. 7 Rear 8. Back Cover 9. Product Label 10. Cable Releasing Hole 11. Anti-theft Lock 12. RJ50 Cable 13. SAM Card Slot*2 WARNING Do not unplug the RJ50 cable directly. Please insert a paper clip into the cable releasing hole to unplug the RJ50 cable. 8 9 10 11 1213 Castles Technology Co., Ltd. Confidential • All Right Reserved.Pg. 8 Left 14. Magnetic Stripe Reader Bottom Top 15. Smart Card Reader 16. RJ50 Cable 14 15 16 Castles Technology Co., Ltd. Confidential • All Right Reserved.Pg. 71 2.2. Inserting the SAM Card Step 1: Remove the back cover. Step 2: Insert SAM card into the desired slot. (SAM 2 is on the upper layer.) SAM 1 & 2: Gold contact at upper side of card and facing down. Step 3: Reverse the operation of step 1 to install the back cover. SAM2 SAM1 Castles Technology Co., Ltd. Confidential • All Right Reserved.Pg. 71 3. Appendix 3.1. UL/IEC 62368-1  Warning: Power cord shall be connected to a socket-outlet with earthing connection.  Warning: Risk of explosion if battery is replaced by an incorrect type. Dispose of expended battery in accordance with local disposal regulations.  Warning This product is intended to be supplied by a Listed Power Adapter "L.P.S." (Or "Limited Power Source") and is rated at 5 Vdc, 2 A min., Tma = 50 degrees C.  Attention: le cordon d'alimentation doit être branché sur une prise secteur avec mise à la terre.  Attention: Risque d'explosion si la batterie est remplacée par une de type incorrect É liminer la pile usagée conformément à la réglementation locale en vigueur.  Attention: Le produit est destiné à être alimenté par un adaptateur secteur répertorié « L.P.S. » (ou "Source d'alimentation limitée") et est évalué à 5 Vdc, 2 A min., Tma = 50 degrés C. Castles Technology Co., Ltd. Confidential • All Right Reserved.Pg. 71 3.2. FCC Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can …

Text truncated - open the document above for the full version.

Covered list attestation FCC application letter Kiwa Page 1 of 2 RF_755_03 06-06-2024 Certification Application Attestation Statements CASTLES TECHNOLOGY CO., LTD. 6F., NO.207-5, SEC.3, BEIXIN RD., XINDIAN DIST, NEW TAIPEI CITY 231030, TAIWAN (R.O.C.) Subject: FCC ID: WIYV1P35001 To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) CASTLES TECHNOLOGY CO., LTD. certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) CASTLES TECHNOLOGY CO., LTD. certifies that, as of the date of the filing of this application, the applicant - is / - is not (3) identified on the Covered List as an entity producing “covered” equipment. Date: 2026/01/13 City: New Taipei City Name (2) : Evelyn Chen Function: Project Manager of Product Certification Team Telephone number: +886-2-8913-1771 Email address: [email protected] Signature: 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . (2): For FCC it must be the Grantee Code “owner” or the authorized agent. (3): double click on the appropriate box and select ‘’checked” then “OK”

RF_160_06 Declaration of Authorisation Date of issue 13-08-2025 Declaration of Authorization We Name: CASTLES TECHNOLOGY CO., LTD. Address: 6F, NO. 207-5, SEC. 3, BEIXIN RD., XINDIAN DISTRICT City: NEW TAIPEI CITY . Country: TAIWAN (R. O. C.). Declare that: Name Representative of agent: Chenz Ker Agent Company name: MRT Technology (Taiwan) Co., Ltd Address: No. 38, Fuxing Second Rd., Guishan Dist., City: Taoyuan Country Taiwan is authorized to apply for Certification of the following product(s): Product description: POS Terminal . Type designation: V1P 3.5, V1P-BK  Trademark: CASTLES TECHNOLOGY  FCC ID: WIYV1P35001 IC: 27350-V1P35001 on our behalf. Date: 2026/01/13.. City: NEW TAIPEI CITY .. Name: Evelyn Chen.. Function: Project Manager of Product Certification Team Signature: .

Declaration letter Dear Sir, For our business issue and marketing requirement, we would like to list different model number on the FCC and IC reports, as following: FCC ID: WIYV1P35001 IC: 27350-V1P35001 Model No.: V1P 3.5, V1P-BK Model Difference: Only the sensor of the product is different, the RF hardware are identical. Model Layout Ethernet Front Camera V1P 3.5 Same With With V1P-BK Same W/O W/O Name: Evelyn Chen.. Function: Project Manager of Product Certification Team Signature: .

Report No.: 2601TW8701-UE 1 of 6 External Photograph (1) EUT Photo (V1P 3.5) (2) EUT Photo (V1P 3.5) Report No.: 2601TW8701-UE 2 of 6 (3) EUT Photo (V1P 3.5) (4) EUT Photo (V1P 3.5) Report No.: 2601TW8701-UE 3 of 6 (5) EUT Photo (V1P 3.5) (6) EUT Photo (V1P 3.5) Report No.: 2601TW8701-UE 4 of 6 (7) EUT Photo (V1P-BK) (8) EUT Photo (V1P-BK) Report No.: 2601TW8701-UE 5 of 6 (9) EUT Photo (V1P-BK) (10) EUT Photo (V1P-BK) Report No.: 2601TW8701-UE 6 of 6 (11) EUT Photo (V1P-BK) (12) EUT Photo (V1P-BK)

V1P 3.5, V1P-BK-Lable Location FCC ID:WIYV1P35001 IC: 27350-V1P35001

Report No.: 2601TW8701-UI 1 of 9 Internal Photograph (1) EUT Photo (V1P 3.5) (2) EUT Photo (V1P 3.5) Report No.: 2601TW8701-UI 2 of 9 (3) EUT Photo (V1P 3.5) (4) EUT Photo (V1P 3.5) Report No.: 2601TW8701-UI 3 of 9 (5) EUT Photo (V1P 3.5) (6) EUT Photo (V1P 3.5) Report No.: 2601TW8701-UI 4 of 9 (7) EUT Photo (V1P 3.5) (8) EUT Photo (V1P 3.5) Report No.: 2601TW8701-UI 5 of 9 (9) EUT Photo (V1P 3.5) (10) EUT Photo (V1P-BK) Report No.: 2601TW8701-UI 6 of 9 (11) EUT Photo (V1P-BK) (12) EUT Photo (V1P-BK) Report No.: 2601TW8701-UI 7 of 9 (13) EUT Photo (V1P-BK) (14) EUT Photo (V1P-BK) Report No.: 2601TW8701-UI 8 of 9 (15) EUT Photo (V1P-BK) (16) EUT Photo (V1P-BK) Report No.: 2601TW8701-UI 9 of 9 (17) EUT Photo (V1P-BK)

MRT Technology (Taiwan) Co., Ltd Report No.: 2601TW8701-U3 Phone: +886-3-3288388 Report Version: 1.0 Web: www.mrt-cert.com Issue Date: 2026-01-30 Page Number: 1 of 13 RF Exposure Evaluation Declaration FCC ID : WIYV1P35001 IC : 27350-V1P35001 Applicant : CASTLES TECHNOLOGY CO., LTD. Application Type : Certification Product : POS Terminal Model No. : V1P 3.5 Series Model No. : V1P-BK Trademark : FCC Rule Part(s) Part 2.1091 RSS-102 issue6 Received Date : January 5, 2026 Tested By : ( Owen Tsai ) Reviewed By : ( Paddy Chen ) Approved By : ( Chenz Ker) The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standards through the calibration of the equipment and evaluated measurement uncertainty herein. The test report shall not be reproduced except in full without the written approval of MRT Technology (Taiwan) Co., Ltd. Report No.: 2601TW8701-U3 Page Number: 2 of 13 Revision History Report No. Version Description Issue Date Note 2601TW8701-U3 1.0 Original Report 2026-01-30 Report No.: 2601TW8701-U3 Page Number: 3 of 13 CONTENTS Description Page 1. INTRODUCTION ................................................................................................................... 5 1.1. Scope ........................................................................................................................ 5 1.2. MRT Test Location .................................................................................................... 5 2. PRODUCT INFORMATION ................................................................................................... 6 2.1. Feature of Equipment under Test .............................................................................. 6 3. RF Exposure Evaluation ..................................................................................................... 7 3.1. FCC Limits ................................................................................................................. 7 3.2. MPE Exemptions ....................................................................................................... 8 3.3. IC Limits ................................................................................................................... 11 3.4. Extemption Limits for Routine Evaluation .................................................................. 11 3.5. Field reference level (FRL) evaluation ......................................................................12 3.6. Test Result of RF Exposure Evaluation .....................................................................13 Report No.: 2601TW8701-U3 Page Number: 4 of 13 General Information Applicant CASTLES TECHNOLOGY CO., LTD. Applicant Address 6F, NO. 207-5, SEC. 3, BEIXIN RD., XINDIAN DISTRICT, NEW TAIPEI CITY 231030, TAIWAN (R. O. C.) Manufacturer CASTLES TECHNOLOGY CO., LTD. Manufacturer Address 6F, NO. 207-5, SEC. 3, BEIXIN RD., XINDIAN DISTRICT, NEW TAIPEI CITY 231030, TAIWAN (R. O. C.) Test Site MRT Technology (Taiwan) Co., Ltd Test Site Address No. 38, Fuxing Second Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C) MRT FCC Registration No. 291082 MRT IC Registration No. 21723 Test Device Serial No. N/A Production Pre-Production Engineering Test Facility / Accreditations 1. MRT facility is a FCC registered (Reg. No. 291082) test facility with the site description report on file and is designated by the FCC as an Accredited Test Firm. 2. MRT facility is an IC registered (MRT Reg. No. 21723) test laboratory with the site description on file at Industry Canada. 3. MRT Lab is accredited to ISO 17025 by the Taiwan Accreditation Foundation (TAF Cert. No. 3261) in EMC, Telecommunications and Radio testing for FCC (Designation Number: TW3261), Industry Canada, EU and TELEC Rules. Report No.: 2601TW8701-U3 Page Number: 5 of 13 1. INTRODUCTION 1.1. Scope Measurement and determination of electromagnetic emissions (EMC) of radio frequency devices including intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal Communications Commission and the Innovation, Science and Economic Development Canada and Certification and Engineering Bureau. 1.2. MRT Test Location The map below shows the location of the MRT LABORATORY, its proximity to the Taoyuan City. These measurement tests were conducted at the MRT Technology (Taiwan) Co., Ltd. Facility located at No.38, Fuxing 2nd Rd., Guishan Dist., Taoyuan City 33377, Taiwan (R.O.C). Report No.: 2601TW8701-U3 Page Number: 6 of 13 2. PRODUCT INFORMATION 2.1. Feature of Equipment under Test Note: 1. Model Difference can refer as below, the other hardware was the same. (declared by the manufacturer) 2. The test was performed base on V1P 3.5. Product Name POS Terminal Model No. V1P 3.5 Series Model No. V1P-BK NFC Specification 13.56MHz Modulation ASK Antenna Type Loop Antenna Model Appearance Layout Ethernet Front-Camera V1P 3.5 Same Same With With V1P-BK Same Same W/O W/O Report No.: 2601TW8701-U3 Page Number: 7 of 13 3. RF Exposure Evaluation 3.1. FCC Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits For Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 0.3-3.0 614 1.63 *(100) ≤6 3.0-30 1842/f 4.89/f *(900/f 2 ) <6 30-300 61.4 0.163 1.0 <6 300-1,500 -- -- f/300 <6 1,500-100,000 -- -- 5 <6 (B) Limits for General Population/ Uncontrolled Exposures 0.3-1.34 614 1.63 *(100) <30 1.34-30 824/f 2.19/f *(180/f 2 ) <30 30-300 27.5 0.073 0.2 <30 300-1,500 -- -- f/1500 <30 1,500-100,000 -- -- 1.0 <30 f= frequency in MHz. * = Plane-wave equivalent power density. Report No.: 2601TW8701-U3 Page Number: 8 of 13 3.2. MPE E…

Text truncated - open the document above for the full version.

MRT Technology (Taiwan) Co., Ltd Report No.: 2601TW8701-U2 Phone: +886-3-3288388 Report Version: 1.0 Fax: +886-3-3288918 Issue Date: 2026-01-30 Web: www.mrt-cert.com Page Number: 1 of 44 FCC ID : WIYV1P35001 IC : 27350-V1P35001 APPLICANT : CASTLES TECHNOLOGY CO., LTD. Application Type : Certification Product : POS Terminal Model No. : V1P 3.5 Series Model No. : V1P-BK Trademark : FCC Classification : (DXX) Part 15 Low Power Communication Device Transmitter FCC Rule Part(s) : Part 15.225 ISED Standard : RSS-210 Issue 10 Test Procedure(s) : ANSI C63.10-2020+Cor 1-2023+C63.10a-2024 + Errata to C63.10a-2024 Received Date : January 5, 2026 Test Date : January 7, 2026~ January 13, 2026 MEASUREMENT REPORT Tested By : ( Kaunaz Lee ) Reviewed By : ( Paddy Chen ) Approved By : ( Chenz Ker) The test results only relate to the tested sample. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.10. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Taiwan) Co., Ltd. Report No.: 2601TW8701-U2 Page Number: 2 of 44 Revision History Report No. Version Description Issue Date Note 2601TW8701-U2 1.0 Original Report 2026-01-30 Report No.: 2601TW8701-U2 Page Number: 3 of 44 CONTENTS Description Page 1. INTRODUCTION ......................................................................................................................6 1.1. Scope ............................................................................................................................ 6 1.2. MRT Test Location ......................................................................................................... 6 2. PRODUCT INFORMATION ......................................................................................................7 2.1. Equipment Description .................................................................................................. 7 2.2. Test Mode ...................................................................................................................... 8 2.3. Test Software ................................................................................................................. 8 2.4. Test Configuration.......................................................................................................... 8 2.5. Test System Details ....................................................................................................... 9 2.6. EMI Suppression Device(s)/Modifications ...................................................................... 9 2.7. Labeling Requirements .................................................................................................. 9 3. DESCRIPTION of TEST ......................................................................................................... 10 3.1. Evaluation Procedure .................................................................................................. 10 3.2. AC Line Conducted Emissions .................................................................................... 10 3.3. Radiated Emissions ..................................................................................................... 11 4. ANTENNA REQUIREMENTS ................................................................................................. 12 5. TEST EQUIPMENT CALIBRATION DATE ............................................................................. 13 6. MEASUREMENT UNCERTAINTY.......................................................................................... 14 7. TEST RESULT ....................................................................................................................... 15 7.1. Summary ..................................................................................................................... 15 7.2. Field Strength of Fundamental Emissions Measurement ............................................. 16 7.2.1. Test Limit ................................................................................................................. 16 7.2.2. Test Procedure used ................................................................................................ 16 7.2.3. Test Setup ............................................................................................................... 17 7.2.4. Test Result ............................................................................................................... 18 7.3. Radiated Spurious Emissions Measurement ............................................................... 20 7.3.1. Test Limit ................................................................................................................. 20 7.3.2. Test Procedure Used ............................................................................................... 20 7.3.3. Test Setup ............................................................................................................... 22 7.3.4. Test Result ............................................................................................................... 23 7.4. 20dB Bandwidth Measurement .................................................................................... 35 7.4.1. Test Limit ................................................................................................................. 35 7.4.2. Test Procedure Used ............................................................................................... 35 Report No.: 2601TW8701-U2 Page Number: 4 of 44 7.4.3. Test Setting .............................................................................................................. 35 7.4.4. Test Setup ..................................................................................…

Text truncated - open the document above for the full version.

Report No.: 2601TW8701-UT 1 of 2 RF Test Photograph Description: Front View of Conducted Emission Test Setup Description: Back View of Conducted Emission Test Setup Report No.: 2601TW8701-UT 2 of 2 Description: Radiated Emission Test Setup for below 30MHz Description: Radiated Emission Test Setup for above 30MHz