WNN-BTA100001Bluetooth Transceiver

Copyright © 2011 Russound ® All rights reserved. All trademarks are property of their respective owners. Russound is not responsible for typographical errors or omissions. Specifications subject to change without notice. BTA-1 Inline Bluetooth Local Source Module for A-BUS® Systems Preliminary TUV Manual Russound, Inc. 5 Forbes Rd., Newmarket, NH 03857, USA tel 603.659.5170 • fax 603.659.5388 www.russound.com technical support: 866.888.7466 e-mail: [email protected] 28-1370 10/26/11 A-BUS is a registered trademark of LeisureTech Electronics Pty Ltd Australia This product may be covered by one or more of the following pat- ents: US #7,181,023, #6,389,139; EP #1004222, AU #739808, NZ #502982, Mexico #241196, Canada #CA2301062 Safety Instructions 1. Read Instructions - All the safety and operating instructions should be read before the equipment is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the equipment in the operating instructions should be adhered to. 4. Follow Instructions - Follow all operating and user instructions. 5. Water and Moisture - The equipment should not be used near water; for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. 6. Mounting - The equipment should be mounted or secured as recommended by the manufacturer. 7. Heat - The equipment should be situated away from heat sources such as radiators, heat registers, stoves, or other equipment (including amplifiers) that produce heat. 8. Power Sources - The product should be connected to a power supply only of the type described in the operating instructions or as marked on the equipment. 9. Grounding or Polarization - Precaution should be taken so that the grounding or polarization means of the product is not defeated. 10. Avoid spills and foreign objects. Ensure liquids and objects don’t get into the product enclosure through any openings. 11. Damage Requiring Service - The equipment should be serviced by qualified service personnel when: the power supply cord or the plug has been damaged; objects have fallen, liquid has been spilled into the equipment; the equipment has been exposed to rain; the equipment does not appear to operate normally; or the equipment has been dropped or the enclosure is damaged. 12. Servicing - The user should not attempt to service the equipment beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel. 13. Care – From time to time you should wipe any dust accumulation from the equipment with a soft dry cloth. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of or more of the following measures: reorient or relocate the receiving antenna; increase the separation between the equipment and receiver; connect the equipment into an outlet on a circuit different from that to which the receiver is connected, or consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Cet appareil numérique de la classe B est conforme à la norme NMB- 003 du Canada. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une communication satisfaisante. Specifications BTA-1 Inline Bluetooth Local Source Module Power requirements: supplied by A-BUS hub via CAT-5 Frequency: 2402 to 2483.5 MHz CAT-5 connection: RJ-45 (T568A standard) Dimensions: 68mm x 57mm x 23mm (W x D x H) Weight: 3.1 ounces Max cable length: Inline device (Maintain 150’ total maximum length CAT-5 between A-BUS hub and A-BUS keypad) Overview The BTA-1 Bluetooth Module is an A-BUS compatible Local Source Module that enables the use of a portable media player, smartphone, or other B…

Text truncated - open the document above for the full version.

TUV Rheinland 336 Initiative Dr., Rochester, NY 14624 FCC ID: WNN-BTA100001 Tel: (585) 426-5555, Fax: (585) 568-8338 IC ID: 7950A-BTA10001 External Photos Figure 1: Front TUV Rheinland 336 Initiative Dr., Rochester, NY 14624 FCC ID: WNN-BTA100001 Tel: (585) 426-5555, Fax: (585) 568-8338 IC ID: 7950A-BTA10001 Figure 2: Back

TUV Rheinland 336 Initiative Dr., Rochester, NY 14624 FCC ID: WNN-BTA100001 Tel: (585) 426-5555, Fax: (585) 568-8338 IC ID: 7950A-BTA10001 Label Location Figure 1: Label Location

TUV Rheinland 336 Initiative Dr., Rochester, NY 14624 FCC ID: WNN-BTA100001 Tel: (585) 426-5555, Fax: (585) 568-8338 IC ID: 7950A-BTA10001 Internal Photos Figure 1: Internal View Note: The antenna is shown on the right hand side of the PC board TUV Rheinland 336 Initiative Dr., Rochester, NY 14624 FCC ID: WNN-BTA100001 Tel: (585) 426-5555, Fax: (585) 568-8338 IC ID: 7950A-BTA10001 Figure 2: Internal View – Back side of board

FCCID: WNN-BTA100001 ICID: 7950A-BTA100001 Report No.: 31153106.001 Russound BTA-1 Page 1 of 48 The test results contained in this report refer exclusively to the product(s) presented for testing. No liability may be assumed for models or products not referred to herein. This test report may not be published or duplicated in part without permission of the testing body. This test report by itself does not constitute authorization for the use of any TUV Rheinland test mark. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. TUV Rheinland of North America, Inc., 762 Park Avenue, Youngsville, NC 27596-9470, Tel: 919-554-3668, Fax: 919-554-3542 QF09B040 Revision 0 Electromagnetic Compatibility Test Report Prepared in accordance with FCC Part 15C, RSS-210 Issue 8, ANSI C63.10:2009 On ABUS Bluetooth Transceiver BTA-1 Russound 5 Forbes Road Newmarket, NH 03857 Prepared by: TUV Rheinland of North America, Inc. FCCID: WNN-BTA100001 ICID: 7950A-BTA100001 Report No.: 31153106.001 Russound BTA-1 Page 2 of 48 The test results contained in this report refer exclusively to the product(s) presented for testing. No liability may be assumed for models or products not referred to herein. This test report may not be published or duplicated in part without permission of the testing body. This test report by itself does not constitute authorization for the use of any TUV Rheinland test mark. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. TUV Rheinland of North America, Inc., 762 Park Avenue, Youngsville, NC 27596-9470, Tel: 919-554-3668, Fax: 919-554-3542 QF09B040 Revision 0 FCCID: WNN-BTA100001 ICID: 7950A-BTA100001 Report No.: 31153106.001 Russound BTA-1 Page 3 of 48 The test results contained in this report refer exclusively to the product(s) presented for testing. No liability may be assumed for models or products not referred to herein. This test report may not be published or duplicated in part without permission of the testing body. This test report by itself does not constitute authorization for the use of any TUV Rheinland test mark. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. TUV Rheinland of North America, Inc., 762 Park Avenue, Youngsville, NC 27596-9470, Tel: 919-554-3668, Fax: 919-554-3542 QF09B040 Revision 0 Client: Russound 5 Forbes Road Newmarket, NH 03857 John Cronk 603-292-0433 / 603-659-5388 [email protected] Identification: ABUS Bluetooth Transceiver Serial No.: 09152430012345 Test item: BTA-1 Date tested: 11/30/2011 Testing location: TUV Rheinland of North America 762 Park Avenue Youngsville, NC 27596-9470 U.S.A. Tel: (919) 554-3668 Fax: (919) 554-3542 Test specification: Emissions: FCC Part 15, Subpart C, RSS-210 Issue 8: FCC Part 15.207(a) and RSS-210 FCC Parts 15.205, 15.209, 15.215(c), RSS-210 FCC Part 15.247(a)(1) and RSS-210 A1.3, FCC Part 15.247 and RSS-210 Annex 8, FCC Part 15.247(a)(1) and RSS-210, Section A8.1 and Section A1.1.3, FCC Part 15.247(a)(1) and RSS-210 A8.1(c), FCC Part 15.247(b)(2) and RSS-210 A8.4(1), FCC Part 15.247(g) and RSS-210 A8.1, FCC Part 15.247(h) and RSS-210 A8.1, FCC Parts 15.109(a) and ICES-003 and FCC Part 15.107(a) and ICES-003 Test Result The above product was found to be Compliant to the above test standard(s) tested by: Randall Masline reviewed by: Cecil Gittens 11 January 2012 Signature 11 January 2012 Signature Other Aspects: None Abbreviations: OK, Pass, Compliant, Complies = passed Fail, Not Compliant, Does Not Comply = failed N/A = not applicable Industry Canada BSMI US5253 NVLAP CODE 200313-0 3466C-1 SL2-IN-E-050R FCCID: WNN-BTA100001 ICID: 7950A-BTA100001 Report No.: 31153106.001 Russound BTA-1 Page 4 of 48 The test results contained in this report refer exclusively to the product(s) presented for testing. No liability may be assumed for models or products not referred to herein. This test report may not be published or duplicated in part without permission of the testing body. This test report by itself does not constitute authorization for the use of any TUV Rheinland test mark. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. TUV Rheinland of North America, Inc., 762 Park Avenue, Youngsville, NC 27596-9470, Tel: 919-554-3668, Fax: 919-554-3542 QF09B040 Revision 0 TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................................... 5 1.1 S COPE ......................................................................................................................................................... 5 1.2 P URPOSE ..................................................................................................................................................... 5 1.3 S UMMARY OF TEST RESULTS ..................................................................................................................... 6 2 LABORATORY INFORMATION ................................................................................................................ 7 2.1 A CCREDITATIONS & ENDORSEMENTS ........................................................................................................ 7 2.2 M EASUREMENT UNCERTAINTY EMISSIONS ............................................................................................... 8 2.3 C ALIBRATION TRACEABILITY .................................................................................................................... 8 2.4 M EASUREMENT EQUIPMENT USED ............................................................................................................ 9 3 PRODUCT INFORMATIO…

Text truncated - open the document above for the full version.

TUV Rheinland 336 Initiative Dr., Rochester, NY 14624 FCC ID: WNN-BTA100001 Tel: (585) 426-5555, Fax: (585) 568-8338 IC ID: 7950A-BTA100001 Page 1 of 2 Test Setup Photos Figure 1: Emissions at 3 meters TUV Rheinland 336 Initiative Dr., Rochester, NY 14624 FCC ID: WNN-BTA100001 Tel: (585) 426-5555, Fax: (585) 568-8338 IC ID: 7950A-BTA100001 Page 2 of 2 Figure 2: Emissions above 1 GHz Figure 3: Temperature Testing