WOISG700BTSG700BT Wireless Linear Imager Bar Code Scanner

The Federal Communication Commission Statement This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures: - - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced Radio/TV technician for help. Use only shielded cables to connect I/O devices to this equipment. You are cautioned that change or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. THIS DEVICE COMPLIES WITH PART 15 OF FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 1 This device may not cause harmful interference and 2 This device must accept any interference received, including interference that may cause undesired operation. The antenna used for this transmitter must not be collocated or operation in conjunction with any other antenna or transmitter. Notice : The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device. Programming Menu V3.9 Notice The manufacturer shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages in connection with the furnishing, performance or use of use the publication. 1 Contents Chapter 1 Description ............................................................ 3 1.1 General ................................................................ 3 1.2 Introduction ......................................................... 4 1.3 Codes Read .......................................................... 4 1.4 Installation ........................................................... 4 1.5 Pin Assig nment ..................................................... 6 Chapter 2 Configuration - General ...................................... 8 2.1 Flow Chart ............................................................ 8 2.2 Loop of Programming .......................................... 9 2.3 Factory Default Settings ....................................... 9 2.4 Main Page of Configuration ............................... 10 Chapter 3 Interface and ..................................................... 11 3.1 Interface SeIection ............................................. 11 3.2 Reading Mode Selection .................................... 12 Chapter 4 Communication Parameters ................................. 13 4.1 RS232 Communication Parameters .................... 13 4.2 Keyboard Wedge Mode Parameters .................. 16 4.3 Output Characters Parameters .......................... 17 4.4 Wand Emulation Mode Parameters ................... 19 Chapter 5 Bar Codes & Others ............................................ 20 5.1 SymboIogies Selection ....................................... 20 5.2 UPC/EANI/JAN Parameters ................................. 24 5.3 Code 39 Parameters .......................................... 26 5.4 Code 128 Parameters ......................................... 28 5.5 Interleave 25 Parameters ................................... 30 5.6 IndustriaI 25 Parameters .................................... 32 5.7 Matrix 25 Parameters ........................................ 34 5.8 CODABAR/NW7 Parameters .............................. 36 5.9 Code 93 Parameters ........................................... 38 5.10 Code 11 Parameters ........................................... 40 5.11 MSI/PLESSEY Code Parameters .......................... 42 5.12 Code 2 of 6 Parameters ...................................... 44 5.13 LCD25 Parameters ............................................. 46 5.14 Telepen Parameters ........................................... 48 5.15 GS1 Databar ...................................................... 50 Chapter 6 Miscellaneous Parameters ................................ 52 6.1 Language Selection ............................................ 52 6.2 Bar Code ID ........................................................ 54 6.3 Reading Level ...................................................... 57 6.4 Accuracy ............................................................. 57 6.5 Buzzer Beep Tone ............................................... 57 6.6 Sensitivity of Continuous Reading Mode .............. 58 6.7 Reverse Output Characters ........................... 59 6.8 Setup Deletion ................................................. 59 2 6.9 Setup Insertion .................................................. 62 6.10 Scanning Line Selection for Multi Parallel lines modes ........................................................................ 65 Chapter 7 Bluetooth Configuration.................................... 66 7.1 Scanner Mode ..................................................... 66 7.2 Out of Range ....................................................... 67 7.3 Sleep…

Text truncated - open the document above for the full version.

Champtek Incorporated 5/F, No.2, Alley 2, Shih-Wei Lane, Chung-Cheng Rd., Xindian Dist., New Taipei City 231, Taiwan Tel: +886-2-22192385 FAX: +886-2-22192387 DOC Letter July 28, 2015 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Dear Regulatory Authority, We, the undersigned, hereby declare that FCC Part 15B Declaration of Conformity procedures will be applied to the digital device portion of the following product: Product: SG700BT Wireless Linear Imager Bar Code Scanner Model: SG700BT, SGXX0BT (X=0~9) FCC Part 15B DoC report number: WSCF1507025 This Device complies with Part 15B DoC of the FCC rules, operation is subject to the following two conditions. This device may not cause harmful interference and, This device must accept any interference received, Including interference that may cause undesired operation TEST LABORATORY MAX LIGHT TECHNOLOGY CO., LTD. No. 74-1, Shibachong Xi, Shiding Shiang, New Taipei City 221, Taiwan (R.O.C.) Accredited Lab. Assigned under FCC number: TW1048 Sincerely, Champtek Incorporated 5/F, No.2, Alley 2, Shih-Wei Lane, Chung-Cheng Rd., Xindian Dist., New Taipei City 231, Taiwan

Champtek Incorporated 5/F, No.2, Alley 2, Shih-Wei Lane, Chung-Cheng Rd., Xindian Dist., New Taipei City 231, Taiwan Tel: +886-2-22192385 FAX: +886-2-22192387 Date: July 28, 2015 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: WOISG700BT Product Name: SG700BT Wireless Linear Imager Bar Code Scanner Request for Short-Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission rules, and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we hereby request short-term confidentiality for the following items prior to marketing the device.:  Test Setup Photos  External Photos  Internal Photos  User Manual These documents contain detailed system and equipment description and related information about the product which Champtek Incorporated considers to be proprietary, confidential, and a custom design and, otherwise would not release to the general public. Since this design is a basis from which future technological products will evolve, Champtek Incorporated considers this information to be of benefit to its competitors, and that the disclosure of information in these documents would give competitors an unfair advantage in the market. This request is being made retroactively due to an over site on our part. We understand that the information has been publicly available 180 days after date of grant. Dated this 07/28/2015 By: Signature Printed Title: President On behalf of : Champtek Incorporated Telephone: +886-2-22192385

Champtek Incorporated 5/F, No.2, Alley 2, Shih-Wei Lane, Chung-Cheng Rd., Xindian Dist., New Taipei City 231, Taiwan Tel: +886-2-22192385 FAX: +886-2-22192387 Date: July 28, 2015 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: WOISG700BT Product Name: SG700BT Wireless Linear Imager Bar Code Scanner Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 07/28/2015 By: Signature Printed Title: Director On behalf of : Champtek Incorporated Telephone: +886-2-22192385

Champtek Incorporated 5/F, No.2, Alley 2, Shih-Wei Lane, Chung-Cheng Rd., Xindian Dist., New Taipei City 231, Taiwan Tel: +886-2-22192385 FAX: +886-2-22192387 Date: July 28, 2015 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: WOISG700BT Product Name: SG700BT Wireless Linear Imager Bar Code Scanner Dear Sir, Due to the business consideration, we have by declare that out product Model: SG700BT, SGXX0BT (X=0~9) Model Differences : All covered models have electrically identical on the circuitry to each other, except for different model numbers within the model designations for sales purposes only. Sincerely, By: Mr KC Wang Signature Printed Title: President Date: 2015-07-28

WEISHANG Certification Co., Ltd. Report No. : WSCF1507025 Page No. : 91 of 103 < Front view of EUT > < Rear view of EUT > WEISHANG Certification Co., Ltd. Report No. : WSCF1507025 Page No. : 92 of 103 < Front view of EUT-Charger > < Rear view of EUT-Charger > WEISHANG Certification Co., Ltd. Report No. : WSCF1507025 Page No. : 93 of 103 < I/O Port > < USB Cable > WEISHANG Certification Co., Ltd. Report No. : WSCF1507025 Page No. : 94 of 103 < Battery-F > < Battery-R > WEISHANG Certification Co., Ltd. Report No. : WSCF1507025 Page No. : 95 of 103 < Adapter Label >

Label Location This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: WOISG700BT

WEISHANG Certification Co., Ltd. Report No. : WSCF15 07025 Page No. : 96 of 103 < Inside view of EUT > < PCB1-F > WEISHANG Certification Co., Ltd. Report No. : WSCF15 07025 Page No. : 97 of 103 < PCB1-R > < PCB2-F > WEISHANG Certification Co., Ltd. Report No. : WSCF15 07025 Page No. : 98 of 103 < PCB3-F > < PCB4-F > WEISHANG Certification Co., Ltd. Report No. : WSCF15 07025 Page No. : 99 of 103 < PCB4-R > < Module-F > WEISHANG Certification Co., Ltd. Report No. : WSCF15 07025 Page No. : 100 of 103 < Module-R > < Module Close in > WEISHANG Certification Co., Ltd. Report No. : WSCF15 07025 Page No. : 101 of 103 < Inside view of EUT-Charger > < PCB5-F > WEISHANG Certification Co., Ltd. Report No. : WSCF15 07025 Page No. : 102 of 103 < PCB5-R > < PCB6-F > WEISHANG Certification Co., Ltd. Report No. : WSCF15 07025 Page No. : 103 of 103 < PCB6-R >

WEISHANG Certification Co., Ltd. Date of Issue: July 28, 2015 Report No. : WSCF1507025 Page No. : 1 of 1 Radio Frequency Exposure EUT INFORMATION EUT SG700BT Wireless Linear Imager Bar Code Scanner Frequency band (Operating) Bluetooth: 2.402 GHz ~ 2.480 GHz Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power 8DPSK: 3.171 dBm (2.08 mW) Antenna gain (Max) 2 dBi TEST RESULT According to KDB 447498 section 4.3.1, the 1-g SAR test exclusion thresholds at test separation distance ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance,mm)] *[√ f(GHz)] ≤ 3.0 The max. average power of channel, including tune-up tolerance(mW) is 2.08 mW @ 2402 MHz (With Tune-up tolerance), The min. test separation distance (mm) is 5 mm, So, [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] *[√ f(GHz)] = 0.645 < 3.0 (With Tune-up tolerance). Therefore, standalone SAR measurements are not required for both head and body.

WEISHANG Certification Co., Ltd. Report No. : WSCF15 07025 Page No. : 1 of 105 FCC 47 CFR PART 15 SUBPART C 15.247 TEST REPORT FOR SG700BT Wireless Linear Imager Bar Code Scanner Model : SG700BT, SGXX0BT (X=0~9) Trade Name: Champtek Issued to Champtek Incorporated 5/F, No. 2, Alley 2, Shih-Wei Lane, Chung-Cheng Rd., Xindian Dist., New Taipei City 231, Taiwan Issued by WEISHANG Certification Co., Ltd. Xizhi Office 12F. -3, No.27-1, Ln. 169, Kangning St., Xizhi Dist., New Taipei City 221, Taiwan (R.O.C.) Test Site No. 74 -1, Shibachong Xi, Shiding Shiang, New Taipei City 223, Taiwan (R.O.C.) Note: This test refers exclusively to the test presented test model and sample. This report shall not be reproduced except in full, without the written approval of WEISHANG Certification Co., Ltd. This document may be altered or revised by WEISHANG Certification Co., Ltd. Personnel only, and shall be noted in the revision section of the document. WEISHANG Certification Co., Ltd. Report No. : WSCF15 07025 Page No. : 2 of 105 Contents 1. General Information ......................................................................................................................... 4 2. Report of Measurements and Examinations................................................................................. 5 2.1 List of Measurements and Examinations ............................................................................... 5 3. Test Configuration of Equipment under Test ................................................................................ 6 3.1 Description of the tested samples .......................................................................................... 6 3.2 Ca rrier Frequency of Channels .............................................................................................. 7 3.3 Test Mode and Test Software ................................................................................................ 8 3.4 TEST Methodology & General Test Procedures ..................................................................... 9 3.5 Measurement Uncertainty ................................................................................................... 10 3.6 Description of the Support Equipments ................................................................................ 10 4. Test and measurement equipment .............................................................................................. 11 4.1 calibration ........................................................................................................................... 11 4.2 equipment ........................................................................................................................... 11 5. Antenna Requirements ................................................................................................................ 13 5.1 Standard Applicable ............................................................................................................ 13 5.2 Antenna Construction and Directional Gain ......................................................................... 13 6. Test of Conducted Emission ....................................................................................................... 14 6.1 Test Limit ............................................................................................................................ 14 6.2 Test Procedures .................................................................................................................. 14 6.3 Typical Test Setup ............................................................................................................... 15 6.4 Test Result and Data ........................................................................................................... 16 7. Test of Radiated Emission ........................................................................................................... 18 7.1 Test Limit ............................................................................................................................ 18 7.2 Test Procedures .................................................................................................................. 18 7.3 Typi cal Test Setup ............................................................................................................... 19 7.4 Test Result and Data (9kHz ~ 30MHz) ................................................................................. 21 7.5 Test Result and Data (30MHz ~ 1GHz, worst emissions found)............................................ 21 7.6 Test Result and Data (Above 1GHz) .................................................................................... 23 8. 20dB Bandwidth Measurement Data ........................................................................................... 41 8.1 Test Limit ............................................................................................................................ 41 8.2 Test Procedures .................................................................................................................. 41 8.3 Test Setup Layout ............................................................................................................... 41 8.4 Test Result and Data ........................................................................................................... 42 9. Frequencies Separation............................................................................................................... 48 9.1 Test Limit ............................................................................................................................ 48 9.2 Test Procedures .................................................................................................................. 48 9.3 Test Setup Layout ............................................................................................................... 48 …

Text truncated - open the document above for the full version.

WEISHANG Certification Co., Ltd. Report No. : WSCF1507025 Page No. : 88 of 105 Appendix 1 PHOTOS OF TEST CONFIGURATION WEISHANG Certification Co., Ltd. Report No. : WSCF1507025 Page No. : 89 of 105 < CE Front View > < CE Rear View > WEISHANG Certification Co., Ltd. Report No. : WSCF1507025 Page No. : 90 of 105 Below 1G < RE Front View > < RE Rear View > WEISHANG Certification Co., Ltd. Report No. : WSCF1507025 Page No. : 91 of 105 Above 1G < RE Front View > < RE Rear View >