WQCASE053ASEDrive PAC

PRODUCT DATASHEET ASEDrive PAC The ASEDrive PAC Sector Readers/Writers family are fully-featured smartcard proximity readers/writers, ideal for highly secured facilities as well as other facilities that wish to utilize access control , intrusion, detection or time and attendance applications. ASEDrive PAC Contactless CPU Smartcard Reader The ASEDrive PAC introduces patented, industry first technology encased in a anti-vandal body, thus combining smart card technology with anti-vandal protection. General Description Programming of the reader is done by firmware upgrade, using Athena Smart Card Programmer. The reader scans information stored within a smartcard, sends the data to a connected access control system, and allows the integrator to set secret keys for different sectors on the card. This established a unique network with proprietary cards, where no card can possibly have the same ID on the same location and with the same reader key. The readers meet IP65 and are suitable for both indoor and outdoor use. The interface is a 10-wire pigtail (including Wiegand, USB & RS232) that allows you to connect the unit to a control panel. Main Features • Advanced, secure, multi-application functionality for intelligent applications. • Easy to deploy in the field with the configuration card (Master card) for secure sector reading of data from the sectors. • Configurable multi output format, supports various Wiegand formats and many more. • Multiple keypad transmission formats (optional) • Microsoft® Windows Compatible software for Master and User Card configuration. Advanced Features • Reads ISO14443 A/B & Mifare Standard cards. • Dedicated LED and buzzer control inputs. • Optical tamper sensor for case and wall tamper detection. • Reads dedicated customer’s sector or serial number. • Internal Secure Access Module (SAM) socket (optional). • Outdoor use and weather-resistance (IP65) • 3 years HW warranty System Components The Readers are compatible with USB desktop card programmer and its associated software. Technical Specification The readers are compatible with a variety of industry controllers. . Athena ASEDrive IIIe PAC (27082012) Asia North America LATAM & Iberia EMEA & International Poland & Central w ww. a t h e n a-s c s . c om ELECTRICAL CHARACTERISTICS ASEDrive PAC Operating Voltage Range: 5-16 VDC Standby Input Current: 110mA Maximum Input Current: 150mA Tamper Output: Open Controller, active low, max sink current 30Ma OPERATIONAL CHATACTERISTICS Inputs: Programmable LED Control / Buzzer control Input, N.O, Dry Contact Indicators: 2 LED indicators Output Formats: Wiegand 26-bit, Clock & Data, Wiegand 32 bit, Wiegand 37 bit, RS232,USB Built-In Proximity Reader: Operating Frequency: 13.56MHz Compatible ISO 14443 A/B Max. Proximity read range: 45mm (1.772 ``) ENVIRONMENTAL CHARATERISTICS Operating Environment: Water resistant, suitable for outdoor use (meets IP65) Operating Temperature -30ºC to 60ºC Operating Humidity: 0% to 95% (Non-Condensing) MECHANICAL CHARATERISTICS Dimensions (H x W x D): 65mm x 55mm x 27mm 2.56 x 2.16 x 1.06 inch Weight: 250g (0.55 lbs.) PRODUCT DATASHEET Specifications are subject to change without notice. All trademarks and trade names are property of their respective owners. IMPORTANT FCC Part 15 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

External photos Photo 1. EUT’s front view. Photo 2. EUT’s rear view. Photo 3. EUT’s rear view. Photo 4. EUT’s rear view.

ID Label and Location Photo 1. FCC ID Label ASEDrive PAC. Photo 2. Label Location ASEDrive PAC.

Internal photos

Test Report No. 9312313551 Applicant: Athena Smartcard Ltd. Equipment Under Test: ASEDrive PAC Model: ASE053 and ASE056 FCC ID: WQCASE053 From The Standards Institution Of Israel Industry Division Electronics & Telematics Laboratory EMC Branch ACLASS Accreditation Services Certificate Number: AT-1359 Test Report No.: 9312313551 Page 2 of 23 pages Title: ASEDrive PAC Model: ASE053 and ASE056 Applicant: Athena Smartcard Ltd. Address: 10 Aba Even St., Herzliya, Israel. Sample for test selected by: The customer The date of test: 22, 30 May and 12 June 2013 Description of Equipment Under Test (EUT): ASEDrive PAC Model: ASE053 and ASE056 Serial number: NA Software version of radio unit 8.05 Hardware version of radio unit ASE053 rev.1.5, ASE056 rev. 1.0 Reference Documents:  CFR 47 FCC: Rules and Regulations; Part 15. “Radio frequency devices”; Subpart B: “Unintentional radiators” (2009) Subpart C : “Intentional radiators” (2009), Section 15.209. “Radiated emission limits, general requirements”. “Radiated Emission Limits, Additional Provisions”; Section 15.225. "Operation within the band 13.110 – 14.010 MHz”. This Test Report contains 23 pages and may be used only in full. This Test Report applies only to the specimen tested and may not be applied to other specimens of the same product. Test Report No.: 9312313551 Page 3 of 23 pages Title: ASEDrive PAC Model: ASE053 and ASE056 1. Test summary Parameter FCC Part 15 Reference paragraph Verdict Test of field strength emission from intentional radiators Subpart C Section 15.225. Comply Radiated emission test. Subpart B Section 15.109 Subpart C Section 15.209 Comply Conducted emissions test Subpart C Section 15.207 Comply Frequency stability test Subpart C Section 15.225 Comply Electronics & Telematics Laboratory August 2013 Name: Eng. Yuri Rozenberg Name: Michael Feldman Position: Head of EMC Branch Position: Test Technician Measurement uncertainty. Were relevant, the following measurement uncertainty level have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: This uncertainty represents an expended uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Test description Expanded uncertainty Radiated emissions in the open field test site at 3 m measuring distance: 30 MHz – 1.0 GHz 1.0 GHz – 18 GHz 2 Uc (E) =  4.32 dB 2 Uc (E) =  4.47 dB Test Report No.: 9312313551 Page 4 of 23 pages Title: ASEDrive PAC Model: ASE053 and ASE056 Table of Contents 1. Test summary 3 2. EUT Description and operation 5 2.1. General description: 5 2.2. Potential emission sources: 8 2.3. EUT setup and operation: 8 3. Measurements, examinations and derived results 8 3.1. Location of the Test Site: 8 3.2. Test condition: 8 3.3. Initial visual check and functional test: 8 3.4. Radiated emission test. 9 3.5. Test of field strength emission from intentional radiator. 10 3.6. AC main conducted emissions test 15 3.7. Test of radiated emissions from unintentional radiator 18 3.8. Frequency stability test according to section 15.225 19 4. Appendix 1. Test equipment used 20 5. Appendix 2: Antenna Factor and Cable Loss 21 Test Report No.: 9312313551 Page 5 of 23 pages Title: ASEDrive PAC Model: ASE053 and ASE056 2. EUT Description and operation 2.1. General description: * Note: the customer supplied all information in clause below. The EUT is Access control unit based on RFID reader communicates with RFID tag at 13.56 MHz frequency. It based on the RFID chip from NXP (CLRC663). Reader is powered from 5VDC via AC/DC adaptor or from PC USB port. ASEDrive PAC intended to be used with ISO/IEC 14443 Type B card. Transmitting frequency 13.56 MHz Type of modulation: ASK Antenna type: Integrated on PCB The EUT’s block diagrams are shown in Figures 1. The EUT external views are presented in Photos #1 and #2. Figure 1. EUT block diagram. Test Report No.: 9312313551 Page 6 of 23 pages Title: ASEDrive PAC Model: ASE053 and ASE056 Photo 1. EUT’s front view. Photo 2. EUT’s rear view. Test Report No.: 9312313551 Page 7 of 23 pages Title: ASEDrive PAC Model: ASE053 and ASE056 Photo 3. RE test setup on OATS. Photo 4. RE test setup on OATS. Test Report No.: 9312313551 Page 8 of 23 pages Title: ASEDrive PAC Model: ASE053 and ASE056 2.2. Potential emission sources: The potential emission sources are detailed in Table 1. Table 1. Potential emission sources Frequency Location 8.0 MHz Main CPU 27.12 MHz crystal RFID interface clock 2.3. EUT setup and operation: Measurements of transmitter were performed in continue transmition mode. 3. Measurements, examinations and derived results 3.1. Location of the Test Site: Preliminary radiated test was conducted at the EMC laboratory of the Standards Institution of Israel in Tel-Aviv. The final radiated emission test was conducted in an Open Area Test Site located at Kibbutz Native Halamed Hai in Emek HaEla, Israel. 3.2. Test condition: Temperature: 24C. Humidity: 63 %. Atmospheric pressure: 1012 mbar. 3.3. Changes of EUT during the test: During the RE tests ferrite mfr. "Wurth Electronik" p/n 742 711 11S was added on USB cable at distance 5cm from transmitter plastic cage. The back side of transmitter's plastic cage was plated by metallic cover. Test Report No.: 9312313551 Page 9 of 23 pages Title: ASEDrive PAC Model: ASE053 and ASE056 3.4. Radiated emission test. 3.4.1. General: Per FCC Part 15 subpart C Section 15.225, 15.209 and subpart B Section 15.109.  Initial scans were made using a peak detector but still using the appropriate ANSI IF bandwidth.  A tolerance limit was set 10 dB below the specification limit. Levels above the tolerance limit were retested using the Peak and Q. Peak detector. 3.4.2. Preliminary radiated emission tests: Preliminary investigation measurements were performed up to tenth harmonic of fundamental in a semi-anechoic chamber at distance 3 meter. The EUT was setup in its typical configuration and operated in its various modes. For each mode of operation the frequ…

Text truncated - open the document above for the full version.

Test set up photos RE test setup RE test setup RE test setup RE test setup