WSG-M112Bluetooth Headset

1 BluetoothHeadset M112 UserManual 2 Catalog 1.ProductOverview-------------------------------------------------------------1 2.BasicOperation----------------------------------------------------------------2 3.BluetoothPairingandConnection-------------------------------------------3 3.1Connectwithtwodevices 4.LEDIndicator-----------------------------------------------------------------5 5.Charging----------------------------------------------------------------------6 6.ProductSpecification----------------------------------------------------------7 7.AttentionsandQ&A----------------------------------------------------------8 3 1.ProductOverview Volume+/Volume-/MuteButton/Type-cChargingInterface/ PowerButton/LedIndicator/ANCButton Packinglist： A.BluetoothHeadsetM112x1 B.Basex1 C.Donglex1 D.Type-Cchargecablex1 E.Usermanualx1 4 2.BasicOperation ButtonFunctionOperationInstruction Power Button PowerOn Inoffstatus,longpress2secondstopoweron, PowerOffInonstatus,longpress3secondstopoweroff RedialACall Inconnectedstate,doublepresstoredialacall VoiceDialing Inconnectedstate,longpressfor1secondthenrelease AnsweracallWhenacallincoming,shortpresstoanswer Hangupacall Whenduringacall,shortpresstohangup RejectacallWhenacallincoming,longpressfor1secondtorejectacall Play/PauseShortpresswhenplaymusic. EnterPairingMode A.Powerontoenterpairingmode B.TurnofftheBluetoothofthemobilephonemanually,and theheadsetentersthepairingmode 5 Three-waycalling function 1.Callcomingduringthecall,doublepresstoanswerthenew callandkeepthecurrentcall 2.Callcomingduringcall,shortpresstoanswerthenewcall andhangupthecurrentcall 3.Callcomingduringthecall,longpressfor1secondto rejectthenewcallandkeepthecurrentcall 4.Whenyouareonathree-partycall,doublepresstoswitch audiobetweenthecurrentcallandthekeepcall Volume+ VolumeUp Shortpress NextSongLongpressfor1second. Volume- VolumeDownShortpress PreviousSongLongpressfor1second. Microphone MuteButton MicrophoneMute Whenduringacall,shortpresstomuteon,pressagainto cancelmute SwitchTranspare ntMode IntheANCONstate,pressthe"mutebutton"for3secondsto turnofforturnonthetransparentmode. Combine Button deletepaired records Inon-state,longpresstheMFBandVolume-Buttonfor5 secondstoclearthepairingrecord.Afterdeleting,the M112willnotconnectdevicesautomatically. 3.BluetoothPairingandConnection A.TurnonM112toenterthepairingautomatically;Ifthestandbystateis notconnected,double-clickthepowerbuttontoenterthepairing;Ifthe 6 mobilephoneactivelydisconnectstheBluetoothdevice,theM112can alsoenterthepairingstate. B.Searchandclicktoconnect”M112”onyourphoneBluetoothlists, onceafterconnected,nowyoucanplaymusicfromphonetoheadphone. C.YoucanpressPower/Volume+/Volume-/MicrophoneMuteButton ontheBluetoothheadsettocontroltheanswer/hangupacalland play/pauseofthemusic,nextandprevioussong,volumeupanddown, microphonemute. 1.Pairing:TurnonM112toenterthepairingautomatically;Ifthe standbystateisnotconnected,double-clickthepowerbuttontoenter 7 thepairing;IfthemobilephoneactivelydisconnectstheBluetooth device,theM112canalsoenterthepairingstate. 2.Connect:searchandclicktoconnect“M112”onyourphone Bluetoothlists. 3.1.Connectwithtwodevices ThemobilephonesconnectedtoM112aredividedintotwosets: MachineAandMachineB. ConnectmachineAfirst,andtoggletheswitchtoOntoenter pairingmode（ifnot,pleasedoubleclickpowerbutton）,turn ontheBluetoothofmachineAandsearchforthedevice,search for“M112”andthenclicktoconnect.Aftertheconnectionis successful,turnofftheBluetoothofmachineAandM112enters pairingmodeagain. ThenusemachineBtoconnectwithM112,accordingtothe methodofmachineA.Afterthepairingissuccessful,turnon theBluetoothofmachineAandclickM112toconnect. (Somemobilephonesmayhavetheautomaticconnection function). D.*Musiconlycanbeplayedfromonephoneundertwo connections,whenyouwanttoplaymusicfromanotherphone,you 8 needtopauseorclosethemusicofthepreviousphone.Thesame operationduringtalkingstatus. 4.LEDIndicator ModeLEDIndicator Poweron BlueLEDflashes2times Poweroff RedLEDflashes2times Pairingmode Red&BlueLEDflashalternately Connectedstandbymode BlueLEDflashesonceevery10seconds PlayingMusicBlueLEDflashesonceevery10seconds TalkingBlueLEDflashesonceevery10seconds DeletepairingrecordRed&BlueLEDisonfor1second Charging SolidRedLED Fullcharged SolidBlueLED LowbatteryRedLEDflashes 9 5.Charging PleasechargetheM112atoncewhentheRedLEDflash.Charging timeisabout2hours.SolidRedLEDturnsoffandSolidBlueLED turnsonwhenfullcharged. Wiredfunction inthepower-onstate,connecttothecomputerthroughthedata cablecanusethewiredfunction.Whenthedatacableisunplugged, theheadsetwillrestart. ChargingConnections PleaseconnecttotheM112chargingportthroughtheType-Cend ofType-Cchargingcable. Type-Cchargingcable/Chargingwithcharger/ChargingwithPC *Note： 10 PleasechargetheM112atleastonetimeevery2monthswhendon’t useit. 6.ProductSpecification BluetoothVersion BluetoothV5.2 BluetoothChipset QCC3044 OperationRange10meters BluetoothProtocols HSPHFPA2DPAVRCP CODEC SBC 、 AAC 、 aptx 、 aptx-HD BatteryType 400mAh/3.7V ChargingTimeAbout2hours MusicTimeAbout50hours(70%Volume) TalkRimeAbout40hours(70%Volume) Stand-byTime About400hours HeadsetNetWeight About200g HeadsetDimension 186.5*186.8*69mm Callnoisereductioneffect Themaximumnoisereductiondepthisgreater than35db. Optimalnoisereductionfrequencyband200- 1000hz Thebestnoisereductionfrequencybandhasa noisereductiondepthgreaterthan35db. Effectivenoisereductionbandwidth200- 4000hz Theaveragenoisereductiondepth(50- 5000hz)isgreaterthan30db. 11 *TheabovedataareallfromSKYWINGlaboratory,andtheactualusetime, environmentandmusicwillbedifferent. 7.AttentionsandQ&A A．Howtoreconnectandoperationwhenfailedtoreconnect？ WhenM112connectedwithyourmobilephonesuccessfullyatthefirst time,itwillsearchandreconnectthepaireddeviceautomaticallywhen poweron,Iffailed,Pleaseactivelyclickthe”M112”intheBluetoothpairing listofthemobilephonetoconnect. B.Howtodeletepairedrecords？ Inon-state(nocalls),longpresstheMFBandVolume-Buttonfor5 secondstoclearthepairingrecord.Afterdeleting,theM112willnot connec…

Text truncated - open the document above for the full version.

SKYWINGCommunicationElectronicsCo.,Ltd No.62,10Rd,Longyan,HumenTown,DongguanCity,GuangdongProvince,China FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:Jul.11,2024 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID: WSG-M112 [SKYWINGCommunicationElectronicsCo.,Ltd](“theapplicant”)certifiesthattheequipmentforwhich authorizationissoughtisnot“covered”equipmentprohibitedfromreceivinganequipment authorizationpursuanttosection2.903oftheFCCrules. Sincerely, TonyLiu (Applicantsignature) (TonyLiu)

SKYWINGCommunicationElectronicsCo.,Ltd No.62,10Rd,Longyan,HumenTown,DongguanCity,GuangdongProvince,China FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:Jul.11,2024 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:WSG-M112 [SKYWINGCommunicationElectronicsCo.,Ltd](“theapplicant”)certifiesthat,asofthedateofthefilingofthe application,theapplicantisnotidentifiedontheCoveredListasanentityproducing“covered” equipment. Sincerely, TonyLiu (Applicantsignature) (TonyLiu)

SKYWINGCommunicationElectronicsCo.,Ltd No.62,10Rd,Longyan,HumenTown,DongguanCity,GuangdongProvince,China Date:Jul.11,2024 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 FCCID:WSG-M112 USAgent–AttestationStatement/Part2.911(d)(7) [SKYWINGCommunicationElectronicsCo.,Ltd]certifies,thatasof[Jul.11,2024],wehavedesignatedFCCUSAgent, LLCtoacceptserviceofprocessonourbehalfforFCCID: WSG-M112 . [SKYWINGCommunicationElectronicsCo.,Ltd],acceptstomaintainanagentofserviceofprocessintheUnited Statesfornolessthanoneyearaftereitherthegranteehaspermanentlyterminatedallmarketingandimportationofthe applicableequipmentwithintheU.S.,ortheconclusionofanyCommission-relatedadministrativeorjudicialproceeding involvingtheequipment,whicheverislater. FCCUSAgent,LLC,acceptsasofthedateofthefilingofthisapplication,theobligationofbeingthedesignatedagent forthepurposeofacceptingserviceofprocessonbehalfof[SKYWINGCommunicationElectronicsCo.,Ltd]for FCCID:WSG-M112. DesignatedAgentInformation: CompanyName:FCCUSAgent,LLC FRN:0033402884 Address:3722IllinoisAvenue,SaintCharles,IL,60174,USA ContactPerson:TimPayne Phone:708-571-3148 Email:[email protected] Sincerely, Company:[SKYWINGCommunication ElectronicsCo.,Ltd] DesignatedAgent:FCCUSAgent,LLC CompanyRepresentative:[TonyLiu] Tel:86-769-85239948 Email:[email protected] FRN:0034489997 DesignatedAgentRepresentative:TimPayne Signature: TonyLiu Signature:

SKY WING Communication Electronics Co.,Ltd No.62, 10 Rd, Longyan, Humen Town, Dongguan City, Guangdong Province, China Jul. 11, 2024 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID: WSG-M112 Models: M112, FELITRON PULSO, M119, SK-M119, SSONAR 85 To Whom It May Concern: We, The SKY WING Communication Electronics Co.,Ltd hereby declare that the model : M112 is identical with the model : FELITRON PULSO, M119, SK-M119, SSONAR 85 except the model name. Except for the different above, no other modification is performed. Sincerely, Signature: [Tony Liu, General Manager]

SKYWINGCommunicationElectronicsCo.,Ltd No.62,10Rd,Longyan,HumenTown,DongguanCity,GuangdongProvince,China OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:Jul.11,2024 Subject;RequestforConfidentiality FCCID:WSG-M112 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthesedocuments mightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantageinthemarket. SchematicDiagram BlockDiagram OperationalDescription Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely TonyLiu Contactperson:TonyLiu

SKY WING Communication Electronics Co.,Ltd No.62, 10 Rd, Longyan, Humen Town, Dongguan City, Guangdong Province, China (Jul. 11, 2024) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Attestation of Global Compliance (Shenzhen) Co., Ltd) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Name: Tony Liu Title: General Manager

Report No.: AGC00213240502AP03 Page 1 of 4 EXTERNAL PHOTOS WHOLE VIEW OF EUT TOP VIEW OF EUT Report No.: AGC00213240502AP03 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC00213240502AP03 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC00213240502AP03 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 5mm&20mm FCC ID: WSG-M112

Page 1 of 10 RF Exposure Report Report No.: AGC00213240502FH01 FCC ID : WSG-M112 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Bluetooth Headset BRAND NAME : N/A MODEL NAME : M112, FELITRON PULSO, M119, SK-M119, SSONAR 85 APPLICANT : SKY WING Communication Electronics Co., Ltd DATE OF ISSUE : Jul. 11, 2024 STANDARD(S) : FCC KDB 447498 D01 V06 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC00213240502FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jul. 11, 2024 Valid Initial Release Report No.: AGC00213240502FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Mobile Device Evaluation Method and Limit ................................................................................................ 9 6. Measurement Results ................................................................................................................................... 10 7. Measurement Evaluation .............................................................................................................................. 10 Report No.: AGC00213240502FH01 Page 4 of 10 1. General Information Applicant SKY WING Communication Electronics Co., Ltd Address No.62, 10 Rd, Longyan, Humen Town, Dongguan City, Guangdong Province, China Manufacturer SKY WING Communication Electronics Co., Ltd Address No.62, 10 Rd, Longyan, Humen Town, Dongguan City, Guangdong Province, China Factory SKY WING Communication Electronics Co., Ltd Address No.62, 10 Rd, Longyan, Humen Town, Dongguan City, Guangdong Province, China Product Designation Bluetooth Headset Brand Name N/A Test Model M112 Series Model(s) FELITRON PULSO, M119, SK-M119, SSONAR 85 Difference Description All the same except for the model name Date of receipt of test item May 21, 2024 Date of Test May 21, 2024 to Jul. 11, 2024 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Thea Huang (Project Engineer) Jul. 11, 2024 Reviewed By Calvin Liu (Reviewer) Jul. 11, 2024 Approved By Max Zhang (Authorized Officer) Jul. 11, 2024 Report No.: AGC00213240502FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) Bluetooth: 2.402GHz ~ 2.480GHz Other: Hardware Version V05 Software Version V01 Modulation Type BR GFSK, EDR π /4-DQPSK, 8DPSK Maximum Transmitter Power 1.349dBm Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation Ceramic Antenna Antenna Gain 2.6dBi Minimum Assessment Distance 5mm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC00213240502FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC00213240502FH01 Page 7 of 10 3.3 Environmental Conditions NORMAL CONDITIONS Temperature range (°C) 15 - 35 Relative…

Text truncated - open the document above for the full version.

SMD
CERAMIC
ANTENNA
Data
Sheet For 2400-2480MHz 3.2x1.6mm [EIA1206] CS @copyright CSCURVE Electronics -2450-31-L Data
Sheet SMD CERAMIC ANTENNA LWA 0 . 55±0 . S h a p es A n d D im e n s i o n s D im e n s i o n s i n m m 1 3 .1 0 ± 0 .1 0 1. 55 ± 0 .1 00 .4 0 ± 0 .2 0 H A pp li cat i o F eatu r e ■ Lig ht weig ht, co mpact ■ Wi d e ba n d w i d t h , l ow co s t ■ B u il t- i n a n t e nn a with hig h gai n n ■ Bl ue t oo t h TECHNOLOGY Rev.1.8 @copyright CSCURVE Electronics ■ IEEE802.11g/b ■ Zigbee systems ■ e t c ... P a r t N u m b e r in g Sy ste m Size Material Frequency Type Data
Sheet SMD CERAMIC ANTENNA TECHNOLOGY 2400~2480 @copyright CSCURVE Electronics Electrical Characteristics per line(TA=25°C) MHz dB 2.6i 72.30 % Fr e q u e n c y B a n 50 d P o l a r iz a t i o n * P e ak G a in * E ff i c i e n c y P a r a m e t e Im p e n da n ce r S p ec if i ca t i o n U n i t s W CS Line - 2450 - 31 - L Evaluation Board Data
Sheet SMD CERAMIC ANTENNA TECHNOLOGY @copyright CSCURVE Electronics ◎ 3D Gain Pattern (24 0 0 MHz) 2.18 1.34 0.5 -0.34 -1.18 -2.02 -2.86 -4.54 -5.38 -6.22 -7.07 -7.91 -8.75 -9.59 -10.4 -11.3 -12. -3.7 1 ◎ 3D Gain Pattern (2440 MHz) -12 -0.13 -1.05 -1.96 -2.87 -3.78 -4.69 -5.61 -6.52 -7.43 -8.34 -9.26 -10.2 -11. 2.6 1.69 0.78 1 -12.9 ◎ 3D Gain Pattern (2480 MHz) 1.81 1.09 0.36 -0.37 -1.09 -1.82 -2.54 -3.27 -4 -4.72 -5.45 -6.18 -7.63 -8.35 -9.08 -9.81 -10. -6.9 5 2.4GHz WLAN BAND Data
Sheet SMD CERAMIC ANTENNA TECHNOLOGY Radiation Patterns @copyright CSCURVE Electronics Units：dBi Frequency Characteristics EFFICIENCYAND VSWR Data
Sheet SMD CERAMIC ANTENNA TECHNOLOGY @copyright CSCURVE Electronics RECOMMENDED REFLOW PROFILE °C °C °C Data
Sheet SMD CERAMIC ANTENNA TECHNOLOGY @copyright CSCURVE Electronics TAPE DIMEN SIONS F ea t u r e S p ec ifi ca t i o n s T o l e r a n ces W 8 . 00±0 . 3 0 P4. 00 .1 0 E1.7 5 .1 0 F 3 . 50 .1 0 P2 2. 00 .1 0 D1. 50 + 0 .1 0 - 0 . 00 P o 4. 00 .1 0 1 0 P o 4 0 . 00 .2 0 ±0 ±0 ±0 ±0 ±0 ±0 Packaging Style REEL DIMENSIONS Quantity:5000pieces per 7 reel Data
Sheet SMD CERAMIC ANTENNA TECHNOLOGY @copyright CSCURVE Electronics

Page 1 of 76 FCC Test Report Report No.: AGC00213240502FR01 FCC ID : WSG-M112 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Bluetooth Headset BRAND NAME : N/A MODEL NAME : M112, FELITRON PULSO, M119, SK-M119, SSONAR 85 APPLICANT : SKY WING Communication Electronics Co., Ltd DATE OF ISSUE : Jul. 11, 2024 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC00213240502FR01 Page 2 of 76 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jul. 11, 2024 Valid Initial Release Report No.: AGC00213240502FR01 Page 3 of 76 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 7 2.4 Test Methodology ...................................................................................................................................... 7 2.5 Receiver Input Bandwidth ......................................................................................................................... 7 2.6 Equally Average Use of Frequencies and Behaviour................................................................................ 7 2.7 Pseudorandom Frequency Hopping Sequence ........................................................................................ 8 2.8 Special Accessories .................................................................................................................................. 9 2.9 Equipment Modifications ........................................................................................................................... 9 2.10 Antenna Requirement ............................................................................................................................. 9 3. Test Environment .......................................................................................................................................... 10 3.1 Address of The Test Laboratory .............................................................................................................. 10 3.2 Test Facility .............................................................................................................................................. 10 3.3 Environmental Conditions ....................................................................................................................... 11 3.4 Measurement Uncertainty ....................................................................................................................... 11 3.5 List of Equipment Used ........................................................................................................................... 12 4.System Test Configuration ............................................................................................................................ 14 4.1 EUT Configuration ................................................................................................................................... 14 4.2 EUT Exercise ........................................................................................................................................... 14 4.3 Configuration of Tested System .............................................................................................................. 14 4.4 Equipment Used in Tested System ......................................................................................................... 14 4.5 Summary of Test Results ........................................................................................................................ 15 5. Description of Test Modes ........................................................................................................................... 16 6. RF Output Power Measurement .................................................................................................................. 17 6.1 Provisions Applicable .............................................................................................................................. 17 6.2 Measurement Procedure ......................................................................................................................... 17 6.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 17 6.4 Measurement Result ............................................................................................................................... 18 7. 20dB Bandwidth and 99% Occupied Bandwidth Measurement ............................................................... 24 7.1 Provisions Applicable .............................................................................................................................. 24 7.2 Measurement Procedure ......................................................................................................................... 24 7.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 24 7.4 Measurement Results ............................................................................................................................. 25 8. Conducted Band Edge and Out-of…

Text truncated - open the document above for the full version.

Report No.: AGC00213240502FR01 Page 70 of 76 12. Frequency Separation Measurement 12.1 Provisions Applicable When the power is less than 0.125W: The minimum permissible channel separation for this system is 2/3 the value of the 20dB BW. When the power is less than 1W: The minimum permissible channel separation for this system is 20dB BW. 12.2 Measurement Procedure The EUT shall have its hopping function enabled. Use the following spectrum analyzer settings: 1. Span: Wide enough to capture the peaks of two adjacent channels. 2. RBW: Start with the RBW set to approximately 30% of the channel spacing; adjust as necessary to best identify the center of each individual channel. 3. Video (or average) bandwidth (VBW) ≥ RBW. 4. Sweep: Auto. 5. Detector function: Peak. 6. Trace: Max hold. g) Allow the trace to stabilize. 7. Use the marker-delta function to determine the separation between the peaks of the adjacent channels. 12.3 Measurement Setup (Block Diagram of Configuration) 12.4 Measurement Result Test Data of Frequency Separation Test Mode Channel Separation (MHz) Limits (MHz) Pass or Fail GFSK Hopping 0.913 ≥0.637 Pass Report No.: AGC00213240502FR01 Page 71 of 76 Test Graphs of Frequency Separation Test_Graph_BR_HOP_ANT1_NA_1Mbps_Hopping Separation Note: All mode rates are tested and evaluated, GFSK modulated DH5 mode is the worst case and documented in the report. Report No.: AGC00213240502FR01 Page 72 of 76 13. AC Power Line Conducted Emission Test 13.1 Measurement Limit Frequency Maximum RF Line Voltage Q.P. (dBμV) Average (dBμV) 150kHz~500kHz 66-56 56-46 500kHz~5MHz 56 46 5MHz~30MHz 60 50 Note: 1. The lower limit shall apply at the transition frequency. 2. The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.50 MHz. 13.2 Measurement Setup (Block Diagram of Configuration) Report No.: AGC00213240502FR01 Page 73 of 76 13.3 Preliminary Procedure of Line Conducted Emission Test 1. The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. When the EUT is a tabletop system, a wooden table with a height of 0.8 meters is used and is placed on the ground plane as per ANSI C63.10 (see Test Facility for the dimensions of the ground plane used). When the EUT is a floor-standing equipment, it is placed on the ground plane which has a 3-12 mm non-conductive covering to insulate the EUT from the ground plane. 2. Support equipment, if needed, was placed as per ANSI C63.10. 3. All I/O cables were positioned to simulate typical actual usage as per ANSI C63.10. 4. All support equipment received AC120V/60Hz power from a LISN, if any. 5. The EUT received DC 5V power from adapter which received AC120V/60Hz power from a LISN. 6. The test program was started. Emissions were measured on each current carrying line of the EUT using a spectrum Analyzer / Receiver connected to the LISN powering the EUT. The LISN has two monitoring points: Line 1 (Hot Side) and Line 2 (Neutral Side). Two scans were taken: one with Line 1 connected to Analyzer / Receiver and Line 2 connected to a 50 ohm load; the second scan had Line 1 connected to a 50 ohm load and Line 2 connected to the Analyzer / Receiver. 7. Analyzer / Receiver scanned from 150 kHz to 30MHz for emissions in each of the test modes. 8. During the above scans, the emissions were maximized by cable manipulation. 9. The test mode(s) were scanned during the preliminary test. Then, the EUT configuration and cable configuration of the above highest emission level were recorded for reference of final testing. 13.4 Final Procedure of Line Conducted Emission Test 1. EUT and support equipment was set up on the test bench as per step 2 of the preliminary test. 2. A scan was taken on both power lines, Line 1 and Line 2, recordi…

Text truncated - open the document above for the full version.