WUGARDP101RVideo Door Phone

Video Door Phone User Guide 1 VIDEO DOOR PHONE USER GUIDE Version: 1.00 Issued Date: 12/10/2009 For Models: DP101/DP101R/DP101RT/EP101/EP101T (Single Unit) Contents Chapter 1 : Introduction 1 Welcome 1 General Application of Door Entry System 2 Use of SIP 4 Chapter 2 : Knowing Video Door Phone 5 Package Contents 5 Front Panel 6 Rear Panel 7 Dimensions 8 Chapter 3 : Installing Video Door Phone 9 Suggested Installation Positions 9 Lighting Conditions 9 Installing Procedures 10 1. Screw the Back Plate on the wall. 10 2. Connect the AC wires and Ethernet cable. 11 3. Screw the Video Door Phone with Back Plate. 12 Chapter 4 : Configuring Video Door Phone 13 Finding Video Door Phone on Networks 13 Entering Web User Interface 14 System - Basic Settings 15 System – Network Settings 16 System - Login ID 17 System - Reboot 17 Phone Settings – Video 18 Phone Settings – Audio 19 Video Door Phone User Guide 1 SIP Services 21 Entrance Settings – Extension 22 Entrance Settings – GPIO 23 Upgrade 26 Configurations 27 Chapter 5 : Using Video Door Phone 28 Making Calls From Video Door Phone 28 Answering Calls on IP Video Phone 28 Open the Door (Optional function) 28 Chapter 6 : Applications 30 Functions Performed by the Devices 30 Functions Performed by the GPIO Devices 31 Functions Performed by the IP-PBX 38 Appendix A : Regulatory Information 39 CE DECLARATION OF CONFORMITY (EUROPE) 40 Video Door Phone User Guide 1 Chapter 1 : Introduction Welcome Thank you for choosing this Video Door Phone. This device is designed to co-work with IP Video Phone to compose a SIP based doo r entry system. Beside taking advantages of IP technologies, this syst em also can fully utilize the SI P protocol to link to your SIP VoIP services. Another words, this system is not only performing as an Intercom system, but also work with your Telecom system. This product provides many extraordinary features: z Talk to visitors with real time video and voice on IP Video Phone or Softphone on PC. z Optional RFID card reader with embedded RF ID card database and entrance log system (DP101R/DP101RT) . z Support SIP (Session Initiation Protocol) VoIP services, it is able to forward visitor ca lls to your mobile phone or office pho ne. z Support H.263 and MPEG-4 video formats. z Support G.711 and G.729 audio formats. z Build-in wide angle lens and white light-compensator. z Build-in speaker and microphone. z Water and dust resistance capabilities (IP53 (DP101RT/EP101T) and IP55 ). z Friendly web user interface fo r configuration and management. Please read this user guide carefully befor e installing device. Please contact your deal ers or system integrators if you have q uestions. Video Door Phone User Guide 2 Figure 1 : Single Unit Application General Application of Door Entry System There are two major models of Video Door Phone: DP101 series , single unit model. They are applied on different conditions. Please see following descriptions: Single Unit Application DP101 series is designed for units of apartment or single house. Please see Figure 1. „ Using a home IP PBX to connect all SIP based devices. „ Communicate with each devoice simply with extension numbers. „ Connect to SIP VoIP services via Internet. Community Application DP100 is designed for building, apartment or community. Please see Figure 2 „ Connect each house or apartment with a large IP PBX. „ Residents can check visitors, monitor public areas or call each others with extension numbers. „ Connect to SIP VoIP services via Internet. Video Door Phone User Guide 3 Figure 2 : Community Application Video Door Phone User Guide 4 Use of SIP SIP, initial of Session-Initiati on-Protocol, it is an appl ication-layer control (signaling) pr otocol for creating, modifying, a nd terminating sessions with one or more participants. These sessions include Internet telephone calls, multimed ia distribution, and multimedi a conferences. Simply say, SIP is a most commonly used protocol that been used to interconnect SIP Enabled PBXes and/or SIP User Agents to each other to establish voice and video se ssions between each other over an IP Network. There are few typical applic ations of SIP products, please refer to Figure 3: „ Make a video phone call from Video Phone A to Video Phone B. „ Make a video phone call from softphone on notebook to Video Phone A or Video Phone B. „ View SIP Camera video from Video Phone A or Video Phone B. „ View SIP Camera video from softphone on your computer. Figure 3 : General SIP Application Video Door Phone User Guide 5 Chapter 2 : Knowing Video Door Phone Package Contents The following items are included in your SIP camera package. Check this list before installation to ensure that you have received all items. 1 . Front Panel 2 . Video Door Phone Unit 3 . Back Plate 4 . Screw Pack (4 pieces of M4 x 10mm) 5 . Wrench 6 . Water Stopper (4 pieces of silicon rubber) 7 . Screw for Earth Wire 8 . Wall mounted screw pack 9 . Terminal Connecter 10 . Connecter for Power Wire 11 . Tool for removing the Front Panel from Video Door Phone Unit 12 . Utility CD Please contact your dealer i mmediately if items are missing. Figure 4 : Package Contents Video Door Phone User Guide 6 Front Panel Lens Module IR LED LED Speaker Door Bell Microphone Figure 5 : Front Panel Video Door Phone User Guide 7 Rear Panel Figure 6 : Rear Panel and Connectors Figure 6 : Rear Panel and Connectors Terminal Connector Pack 1 Ethernet RJ45 Connector AC Cable of DP101 Reset Button Alarm Sensor Video Door Phone User Guide 8 Dimensions Figure 7 : Dimensions 40 mm 120 mm 230 mm Video Door Phone User Guide 9 Chapter 3 : Installing Video Door Phone Suggested Installation Positions Due to the view angle of the camera is limited, therefor e the installation position for Video Door Phone is crucial. In order to get a better view, the view angle of this door phone s hould be around 85. Also the height of the lens position is suggested between 155cm to 160cm according to building conditions. For more deta i…

Text truncated - open the document above for the full version.

Date: To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: WUGARDP101R To Whom It May Concern: This letter is to ascertain that AmRoad Technology Inc. Product Video Door Phone has been the units used for conducting FCC compliance testing, the DoC part will be tested by FCC recognized test lab. If you have any question or concerns, pls. contact us. Sincerely,

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 2.0 2206 Ringwood Avenue San Jose, CA 95131 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (current) 1.0 1.0 Nov-14-2006 Revised wording (current) 1.0 2.0 Sept–25-2007 2010/01/12 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 2.0 To: SIEMIC, INC. 2206 Ringwood Avenue, San Jose, CA 95131 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, AmRoad Technology Inc._hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): Video Door Phone, DP101RT/DP101/DP101R/EP101/EP101T /EP101R We affirm that between SIEMIC and AmRoad Technology Inc., any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature Client’s name / title Robert Lee/ Director Contact information / address AmRoad Technology Inc

FCC Test Report Report No.:RF-C260-0909-380 CENTRAL RESEARCH TECHNOLOGY CO. Page : A2-1 11, Lane 41, Fushuen St., Jungshan Chiu, Taipei, Taiwan, 104, R.O.C. TEL. : 886-2-25984542 FAX. : 886-2-25984546 Attachment 2 External Photographs of EUT FCC Test Report Report No.:RF-C260-0909-380 CENTRAL RESEARCH TECHNOLOGY CO. Page : A2-1 11, Lane 41, Fushuen St., Jungshan Chiu, Taipei, Taiwan, 104, R.O.C. TEL. : 886-2-25984542 FAX. : 886-2-25984546 FCC Test Report Report No.:RF-C260-0909-380 CENTRAL RESEARCH TECHNOLOGY CO. Page : A2-2 11, Lane 41, Fushuen St., Jungshan Chiu, Taipei, Taiwan, 104, R.O.C. TEL. : 886-2-25984542 FAX. : 886-2-25984546

Model No.: Serial No.: Device ID: Input : 100~240V 50~60Hz 0.8A Made in Taiwan DP101R 0912 0000001 AmRoad Technology Inc. FCC ID: WUGARDP101R

FCC Test Report Report No.: RC-C260-0909-380 CENTRAL RESEARCH TECHNOLOGY CO. No. 11, Lane 41, Fushuen St., Jungshan Chiu, Taipei, Taiwan, 104, R.O.C. Page : A3- TEL. : 886-2-25984542 FAX. : 886-2-25984546 0 Attachment 3 Internal Photographs of EUT FCC Test Report Report No.: RC-C260-0909-380 CENTRAL RESEARCH TECHNOLOGY CO. No. 11, Lane 41, Fushuen St., Jungshan Chiu, Taipei, Taiwan, 104, R.O.C. Page : A3- TEL. : 886-2-25984542 FAX. : 886-2-25984546 1 FCC Test Report Report No.: RC-C260-0909-380 CENTRAL RESEARCH TECHNOLOGY CO. No. 11, Lane 41, Fushuen St., Jungshan Chiu, Taipei, Taiwan, 104, R.O.C. Page : A3- TEL. : 886-2-25984542 FAX. : 886-2-25984546 2 FCC Test Report Report No.: RC-C260-0909-380 CENTRAL RESEARCH TECHNOLOGY CO. No. 11, Lane 41, Fushuen St., Jungshan Chiu, Taipei, Taiwan, 104, R.O.C. Page : A3- TEL. : 886-2-25984542 FAX. : 886-2-25984546 3 FCC Test Report Report No.: RC-C260-0909-380 CENTRAL RESEARCH TECHNOLOGY CO. No. 11, Lane 41, Fushuen St., Jungshan Chiu, Taipei, Taiwan, 104, R.O.C. Page : A3- TEL. : 886-2-25984542 FAX. : 886-2-25984546 4

FCC Test Report Report No.:RF-C260-0909-380 CENTRAL RESEARCH TECHNOLOGY CO. Page : 1/38 No. 11, Lane 41, Fushuen St., Jungshan Chiu, Taipei, Taiwan, 104, R.O.C. TEL. : 886-2-25984542 FAX. : 886-2-25984546 FCC Test Report for Video Door Phone Trade Name : amroad Model Number : DP101RT/DP101/DP101R/EP101/EP101T /EP101R FCC ID : WUGARDP101R Report Number : RF-C260-0909-380 Date of Receipt : Oct. 15, 2009 Date of Report : Dec. 30, 2009 Prepared for AmRoad Technology Inc. 18F-3 No.150, Chien I Rd., Chung Ho City, Taipei Hsien, Taiwan, R.O.C. Prepared by Central Research Technology Co. EMC Test Laboratory No.11, Lane41, Fushuen St., Jungshan Chiu, Taipei, Taiwan, 104, R.O.C. NVLAP LAB CODE 200575-0 This report shall not be reproduced, except in full, without the written approval of Central Research Technology Co.. It may be duplicated completely in its entirely for legal use with the permission of the applicant. It should not be used to claim product endorsement by NVLAP or any U.S. government agency. The test result in the report applies only to the sample tested. FCC Test Report Report No.:RF-C260-0909-380 CENTRAL RESEARCH TECHNOLOGY CO. Page : 2/38 No. 11, Lane 41, Fushuen St., Jungshan Chiu, Taipei, Taiwan, 104, R.O.C. TEL. : 886-2-25984542 FAX. : 886-2-25984546 Certification Equipment under Test : Video Door Phone Model No. : DP101RT/DP101/DP101R/ EP101/EP101T/EP101R FCC ID : WUGARDP101R Applicant : AmRoad Technology Inc. Address : 18F-3 No.150, Chien I Rd., Chung Ho City, Taipei Hsien, Taiwan, R.O.C. Manufacturer : AmRoad Technology Inc. Date of Testing : Oct. 16, 2009 Applicable Standards : 47 CFR part 15, Subpart C Deviation : N/A Condition of Test Sample : Enigneering Sample We, Central Research Technology Co., hereby certify that one sample of the designated product was tested in our facility during the period mentioned above. The test records, data evaluation and Equipment Under Test (EUT) configurations shown in the present report are true and accurate representation of the measurements of the sample’s RF characteristics under the conditions herein specified. The test results show that the EUT as described in the present report is in compliance with the requirements set forth in the standards mentioned above and apply to the tested sample identified in the present report only. The test report shall not be reproduced, except in its entirety, without the written approval of Central Research Technology Co. FCC Test Report Report No.:RF-C260-0909-380 CENTRAL RESEARCH TECHNOLOGY CO. Page : 3/38 No. 11, Lane 41, Fushuen St., Jungshan Chiu, Taipei, Taiwan, 104, R.O.C. TEL. : 886-2-25984542 FAX. : 886-2-25984546 Contents 1 General Description ..............................................................................................5 1.1 G ENERAL DESCRIPTION OF EUT................................................................................5 1.2 TEST METHODOLOGY................................................................................................5 1.3 REQUIREMENT FOR COMPLIANCE................................................................................6 1.4 SUPPORT UNIT..........................................................................................................8 1.5 LAYOUT OF THE SETUP..............................................................................................8 1.6 TEST CAPABILITY......................................................................................................9 1.7 M EASUREMENT UNCERTAINTY..................................................................................10 2 Field Strength of fundamental............................................................................11 2.1 APPLIED STANDARD................................................................................................ 11 2.2 TEST INSTRUMENTS................................................................................................. 11 2.3 M EASUREMENT PROCEDURE....................................................................................12 2.4 TEST CONFIGURATION.............................................................................................12 2.5 TEST DATA.............................................................................................................13 3 Radiated Emission ..............................................................................................17 3.1 APPLIED STANDARD................................................................................................17 3.2 TEST INSTRUMENTS.................................................................................................18 3.3 MEASUREMENT PROCEDURE....................................................................................19 3.4 TEST CONFIGURATION.............................................................................................20 3.5 T EST DATA.............................................................................................................21 4 Frequency Tolerence ..........................................................................................23 4.1 APPLIED STANDARD................................................................................................23 4.2 TEST INSTRUMENTS.................................................................................................23 4.3 MEASUREMENT PROCEDURE....................................................................................24 4.4 T EST CONFIGURATION.............................................................................................24 4.5 TEST DATA.............................................................................................................25 5 20dB Bandwidth ..................................................................................................28 5.1 APPLIED STANDARD................................................................................................28 5.2 TEST INSTRUMENTS.......…

Text truncated - open the document above for the full version.

FCC Test Report Report No.: RF-C260-0909-380 CENTRAL RESEARCH TECHNOLOGY CO. Page : A1-1 No. 11, Lane 41, Fushuen St., Jungshan Chiu, Taipei, Taiwan, 104, R.O.C. TEL. : 886-2-25984542 FAX. : 886-2-25984546 Attachment 1 Photographs of the Test Configurations FCC Test Report Report No.: RF-C260-0909-380 CENTRAL RESEARCH TECHNOLOGY CO. Page : A1-1 No. 11, Lane 41, Fushuen St., Jungshan Chiu, Taipei, Taiwan, 104, R.O.C. TEL. : 886-2-25984542 FAX. : 886-2-25984546 Radiated Emission Measurement