WY2P2401CAR AUDIO

Attestation Statement Letter I Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: __________________ Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC Application for FCC ID: _______________________________ ________________________ certifies that the equipment for which authorization is sought is not “covered” equipment prohibited for receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Applicant’s Signature: Applicant’s Name:

Attestation Statement Letter II Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: __________________ Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC Application for FCC ID: _______________________________ _________________________ certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Applicant’s Signature: Applicant’s Name:

FCC Attestation Statement US Agent For Service Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: __________________ Ref: Attestation Statements Part 2.911(d)(7) Filing FCC Application for FCC ID: _______________________________ ________________________________ certifies that, as of the date of the filing of the application, ________________________________ is our designated U.S. agent for service of process for the above reference FCC ID: ___________________. ________________________________ agrees to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceedings involving the equipment. _______________________________ accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for above referenced FCC ID. Designated U.S. Agent Information: Name: Address: Contact Person: Telephone: Email: FRN : Sincerely, Applicant’s Signature: Agent’s Signature: Applicant’s Name: Agent’s Name:

FCC Attestation Statement US Agent For Service Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: __________________ Ref: Attestation Statements Part 2.911(d)(7) Filing FCC Application for FCC ID: _______________________________ ________________________________ certifies that, as of the date of the filing of the application, ________________________________ is our designated U.S. agent for service of process for the above reference FCC ID: ___________________. ________________________________ agrees to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceedings involving the equipment. _______________________________ accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for above referenced FCC ID. Designated U.S. Agent Information: Name: Address: Contact Person: Telephone: Email: FRN : Sincerely, Applicant’s Signature: Agent’s Signature: Applicant’s Name: Agent’s Name: Tim Payne

Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: ________________ Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Type of Confidentiality Requested Exhibit Type ☐Short Term ☐Permanent Block Diagrams ☐Short Term External Photos ☐Short Term ☐Permanent* Internal Photos ☐Short Term ☐Permanent Operation Description ☐Short Term ☐Permanent Parts List/BOM ☐Short Term ☐Permanent Schematics ☐Short Term Test Setup Photos ☐Short Term ☐Permanent* User manual *Requires further justification before permanent confidentiality will be allowed. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below for an initial period of ____________ days. Sincerely, Client’s signature: ________________________________ Client’s name & title: _____________________________ Contact information / address:

Faurecia Clarion Electronics Co., Ltd 5acXjzUk Different Announcement We, Faurecia Clarion Electronics Co., Ltd. declare that, Product name: CAR AUDIO, model: P2401 has two structures are consistent with schematic, block diagram, PCB layout, Hardware version, Software version, HSD circuit and HSD socket, Offline navigation, Memory and internal structure. The only difference is whether the DAB board is installed. The differences are not affecting the RF performance. For specific differences please refer to the following table: Function Product name: CAR AUDIO Model name: P2401 Minimum Configuration Maximum Configuration BT (5.0) √ √ HSD circuit and HSD socket √ √ Offline navigation √ √ Memory √ √ DAB ✕ √ Note: The two products have the same wireless IC, radiation circuit, power circuit and other circuits, with same shell. Company: Faurecia Clarion Electronics Co., Ltd. Address: 7-2 Shintoshin, Chuo-ku, Saitama-shi, Saitama, 330-0081, Japan. Signature： Date: 2024/8/13

TAN:YYYY-PCN-UTAN N Type Accepted NTC No.: ESD-CPE-XX-XXXXX ictQATAR Type Approval reg.No.: nnnnnn BOCRA REGISTERED No.: nnnnnn ICT < C O D E > < N A M E > Agréé par I'ARPCT N° d'homologation:HER-xxxx/mm/yyyy Date d'homologation:dd/mm/yyyy D172338 TRA/TA-R/16152/23 This product has been Type Approved by Jamaica: SMA – P2201. La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause int erf erencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier int erf erencia, incluyendo la que pueda causar su operación no deseada 24 10R-06 4949 Connection and use of this communications equipment is permitted by the Nigerian Communications Commission IFT: MICLP223-25839 AGREE PAR L'ARCEP-BENIN Numéro d'agrément: N°2023-232/ARCEP/SE/DAR/GU Date d'agrément: 30/08/2023 91856/SDPPI/2023 13201 TAN:2024-002-0016 ZMB/ZICTA/TA/2024/2/31 AGREE PAR ARTP SENEGAL Numéro d'agrément: 072647/AG/ER AGREE PAR L'ARE MAURITANIE Numéro d'agrément: 1319/ARE/2023 Date d'agrément: 20/07/2023 TA-2023/0946 APPROVED MODEL/MODELO: P2201 FCC ID: WY2P2201 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. LETANOC NR:2023-07-I-0507 SNI 04-6253-2003 LSPr-047-IDN NPB:1-135-002-231405-5 NCA Approved: 7M-7E7-XAA-DSR PART No./PARTE No.: 8740A285 PART NAME: ASSY, SDA (8,GCC) SERIAL NO./Número de serie: XXXXXXXX 7-2 Shintoshin, Chuo-ku,Saitama-shi,Saitama,Japan Faurecia Clarion Electronics Co.,Ltd. Clarion P0001MI3 INPUT/ENTRADA: DC13.2V 15A(Max) USB Output DC5V 0.5A MLM-0004-0A Made In Thailand 91856/SDPPI/2023 13201 ZMB/ZICTA/TA/YYYY/.. TA-2023/0946 APPROVED 24 10R-06 XXXX Connection and use of this communications equipment is permitted by the Nigerian Communications Commission ICT < C O D E > < N A M E > PART No./PARTE No.: 8740A271 PART NAME: UNIT,SDA(8,ASEAN) MODEL/MODELO: P2201 SERIAL NO./Número de serie: XXXXXXXXXX INPUT/ENTRADA: DC13.2V 15A(Max) USB Output DC5V 0.5A 7-2 Shintoshin, Chuo-ku,Saitama-shi,Saitama,Japan Made In Indonesia Faurecia Clarion Electronics Co.,Ltd. MLM-0004-03 This product contains a Type Approved Module by Jamaica: SMA – XXXXXXXX. IFT: XXXXXXXX FCC ID: WY2P2201 Clarion Hecho En Indonesia NCA Approved: XXX-XX-XXX-XXX This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. P0001MI0 AGREE PAR ARTP SENEGAL Numéro d'agrément: XXXX/AG/ER AGREE PAR L'ARE MAURITANIE Numéro d'agrément: XXXX/ARE/YYYY Date d'agrément: dd/mm/yyyy LETANOC NR: xxxx-xx-x-xxxx AGREE PAR L'ARCEP-BENIN Numéro d'agrément: N'xxxx/ARCEP/SE/DR/DA/DAJRC/GU/YYYY Date d'agrément: DD/MM/YYYY XX/XX/XXXX TRA/TA-R/XXXX/XX TAN:YYYY-PCN-UTAN Agréé par I'ARPCT N° d'homologation:HER-xxxx/mm/yyyy Date d'homologation:dd/mm/yyyy BOCRA REGISTERED No.: nnnnnn SNI 04-6253-2003 LSPr-026-IDN NPB: x-xxx-xxx-xxxxxx-x 110 mm 80 mm MODEL/MODELO: P2401 CAR AUDIO 24 10 R-06 xxxx FCC ID: WY2P2401 Dxxxxxx TRA/TA-R/xxxxx/xx AGREE PAR ARTP SENEGAL Numéro d'agrément: xxxxxx/AG/ER ERXXXXX/XX United Arab Emirates AGREE PAR L'ARE MAURITANIE Numéro d'agrément: xxxx/ARE/xxxx Date d'agrément: xx/xx/xxxx LETANOC NR:xxxx-xx-I-xxxx NCA Approved: XX-XXX-XXX-XXX TAN:xxxx-xxx-xxxx EA-XXXX/YYYY

Page 1 of 10 Test Report Verified code: Report No.: E20240822625802-4 Customer: Faurecia Clarion Electronics (Xiamen) Co., Ltd. Address: 6F,No.40,Guanri Road, Software Park Stage II, Xiamen, China Sample Name: CAR AUDIO Sample Model: P2401 Receive Sample Date: Sep.03,2024 Test Date: Sep.14,2024 ~ Nov.13,2024 Reference Document: 47 CFR 2.1091 Radio frequency radiation exposure evaluation: mobile devices. Test Result: Pass Prepared by: Reviewed by: Approved by: Huang Lifang Wu Haoting Xiao Liang GRG METROLOGY & TEST GROUP CO., LTD Issued Date: GRG METROLOGY & TEST GROUP CO., LTD. Address: No.163, Pingyun Road, West of Huangpu Avenue, Guangzhou, Guangdong, China Tel：（+86）400-602-0999 FAX：（+86）020-38698685 Web：http://www.grgtest.com 393614 2024-11-15 Report No.: E20240822625802-4 Page 2 of 10 Statement 1. The report is invalid without "special seal for inspection and testing"; some copies are invalid; The report is invalid if it is altered or missing; The report is invalid without the signature of the person who prepared, reviewed and approved it. 2. The sample information is provided by the client and responsible for its authenticity; The content of the report is only valid for the samples sent this time. 3. When there are reports in both Chinese and English, the Chinese version will prevail when the language problems are inconsistent. 4. If there is any objection concerning the report, please inform us within 15 days from the date of receiving the report. 5. This testing report is only for scientific research, teaching, internal quality control, etc. ——Blank space below this page—— Report No.: E20240822625802-4 Page 3 of 10 TABLE OF CONTENTS 1. GENERAL DESCRIPTION OF EUT............................................................................................................. 5 1.1 APPLICANT ................................................................................................................................... 5 1.2 MANUFACTURER ........................................................................................................................ 5 1.3 FACTORY ...................................................................................................................................... 5 1.4 BASIC DESCRIPTIONOF EQUIPMENTUNDER TEST ............................................................. 5 2. LABORATORY & ACCREDITATIONS ...................................................................................................... 7 2.1 LABORATORY .............................................................................................................................. 7 2.2 ACCREDITATIONS ...................................................................................................................... 7 3. LIMITS FOR GENERAL POPULATION/UNCONTROLLED EXPOSURE .............................................. 8 3.1 MEASUREMENT RESULTS ........................................................................................................ 9 4. CONCLUSION ............................................................................................................................................. 10 ——Blank space below this page—— Report No.: E20240822625802-4 Page 4 of 10 REPORT ISSUED HISTORY Report Version Report No. Description Compile Date 1.0 E20240822625802-4 Original Issue 2024-11-13 ——Blank space below this page—— Report No.: E20240822625802-4 Page 5 of 10 1. GENERAL DESCRIPTION OF EUT 1.1 APPLICANT Name: Faurecia Clarion Electronics (Xiamen) Co., Ltd. Address: 6F,No.40,Guanri Road, Software Park Stage II, Xiamen, China 1.2 MANUFACTURER Name: Faurecia Clarion Electronics Co., Ltd. Address: 7-2 Shintoshin, Chuo-ku, Saitama-shi, Saitama, 330-0081, Japan 1.3 FACTORY Name 1: Clarion Asia (Thailand) Co., Ltd. Address 1: 500/39 Moo3, Hemaraj Eastern Seaboard Industrial Estate 1, Tambol Tasith, Amphur Pluakdaeng Rayong 21140,Thailand Name 2: PT OPTIMA ELEKTRONIK MANUFAKTUR Address 2: MANUFAKTUR Kawasan Industri JABABEKA II, JL. Industri Selatan 5 Blok FF1L, Kel. Pasirsari Cikarang Selatan, Kab. Bekasi, Prov. Jawa Barat 1.4 BASIC DESCRIPTIONOF EQUIPMENTUNDER TEST Equipment: CAR AUDIO Model No.: P2401 Adding Model: / Models Difference: / Trade Name: Clarion FCC ID: WY2P2401 Power supply: DC 13.2V,15A Frequency Band: Bluetooth : GFSK //4-DQPSK/8DPSK: 2402MHz~2480MHz Maximum Transmit Power: GFSK: -1.78dBm /4-DQPSK:-0.67dBm 8DPSK:-0.53dBm Modulation type: GFSK for 1Mbps, /4-DQPSK for 2Mbps,8DPSK for 3Mbps Antenna Specification: Chip Antenna with 3.2dBi gain (Max) Temperature Range: -30°C~+70°C Hardware Version: 2.0.0 Report No.: E20240822625802-4 Page 6 of 10 Software Version: 02.00.00 Sample No: E20240822625802-0006 Note: 1.The EUT antenna gain is provided by the applicant. This report is made solely on the basis of such data and/or information. We accept no responsibility for the authenticity and completeness of the above data and information and the validity of the results and/or conclusions. 2. The product model has two structures are consistent with schematic, block diagram, PCB layout, Hardware version, Software version, HSD circuit and HSD socket, Offline navigation, Memory and internal structure. The only difference is whether the DAB board is installed. The differences are not affecting the RF performance. For specific differences please refer to the following table: Function Product name: CAR AUDIO Model name: P2401 Minimum Configuration Maximum Configuration BT (5.0) √ √ HSD circuit and HSD socket √ √ Offline navigation √ √ Memory √ √ DAB ✕ √ Note: The two products have the same wireless IC, radiation circuit, power circuit and other circuits, with same shell. 3. The maximum configuration of the model was recorded in this report. ——Blank space below this page—— Report No.: E20240822625802-4 Page 7 of 10 2. LABORATORY & ACCREDITATIONS 2.1 LABORATORY The tests & measurements refer to this report were performed by Shenzhen EMC Laboratory of GRG METROLOGY & TEST GROUP C…

Text truncated - open the document above for the full version.

mm A B 11 76 764510398 11109854321 D C H G E F H G F E D C B A 10K 10K SPI1_SCLK SPI1_MOSI MAINTUN_I2S_SDATA MAINTUN_I2S_BCLK MAINTUN_I2S_WS DAB_I2S_SDATA DAB_I2S_BCLK DAB_I2S_WS SPI2_MISO SPI2_MOSI SPI2_SCLK SPI2_SS DAB_I2S_BCLK DAB_I2S_SDATA DAB_I2S_WS MAINTUN_I2S_BCLK MAINTUN_I2S_SDATA MAINTUN_I2S_WS SPI2_MOSI SPI2_SCLK SPI2_MISO SPI2_SS DAB_3.3V SPI1_MISO SPI1_SS DAB_IRQ_SPI2 SPI1_MOSI SPI1_SCLK SPI1_SS SPI1_MISO SPI0_MISO SPI0_MOSI SPI0_SS SPI0_SCLK DAB_IRQ_SPI2 SPI2_MISO SPI2_MOSI SPI2_SS SPI2_SCLK IC104 W25Q81DVSSAG 051562301 1 /CS 2 DO_IO1 3 /WP_IO2 4 GND 5 DI_IO0 6 CLK 7 /HOLD_IO3 8 VCC C115 0.1uF 16V 1 2 C122 0.1uF 16V 1 2 C102 0.1uF 16V 1 2 C120 0.1uF 16V 1 2 C134 1uF 16V EMK107B7105KAHT 1 2 C121 0.1uF 16V 1 2 C123 0.1uF 16V 1 2 C112 0.1uF 16V 1 2 C133 12pF 50V 1 2 C116 0.1uF 16V 1 2 C135 1uF 16V EMK107B7105KAHT 1 2 C109 0.1uF 16V 1 2 C132 12pF 50V 1 2 C103 0.1uF 16V 1 2 C119 0.1uF 16V 1 2 C107 0.1uF 16V 1 2 C106 0.1uF 16V 1 2 C139 0.001uF 50V 1 2 C111 0.001uF 50V 1 2 C108 0.001uF 50V 1 2 C128 0.001uF 50V 1 2 C125 0.001uF 50V 1 2 C127 0.001uF 50V 1 2 C140 15pF 50V 043471197 GCM1555C1H150JA16D 1 2 C141 15pF 50V 043471197 GCM1555C1H150JA16D 1 2 C160 82pF 50V GCM1555C1H820JA16D 043471198 1 2 C161 12pF 50V GCM1555C1H120JA16D 043471180 1 2 C162 12pF 50V 043471180 GCM1555C1H120JA16D 1 2 C165 1pF 50V 1 2 C105 1uF 16V EMK107B7105KAHT 1 2 C104 0.1uF 16V 1 2 C164 0.1uF 16V 1 2 C117 22uF 16V GRT21BC81C226ME13 1 2 C113 22uF 16V GRT21BC81C226ME13 1 2 C114 22uF 16V GRT21BC81C226ME13 1 2 C110 22uF 16V GRT21BC81C226ME13 1 2 C118 22uF 16V GRT21BC81C226ME13 1 2 C101 0.1uF 16V 1 2 24/07/1817:35:3025MY_MMC_DAB.cir/001.sht Q102 RQ1E050RPFRATR 125705090 1 2 3 4 5 6 7 8 D_GND D_GND L103 BLM18PG121SN1D 2A BMZ0211 12 L113 0.051uH 010348651 LQW18AN51NG0ZD 370mA 12 L112 0.039uH 010348650 LQW18AN39NG0ZD 1 2 L105 MPZ1608S601AT 010310454 12 L107 MPZ1608S601AT 010310454 12 L104 MPZ1608S601AT 010310454 12 L102 MPZ1608S601AT 010310454 12 L101 BLM18KG121TN1D 3A 12 L106 MPZ1608S601AT 010310454 12 192411600 Q101 2SC4116-0YGL85L 1 2 3 RN101 33 1 2 3 45 6 7 8 RN103 10k 1/16W 1234 5678 1/10W R107 330 1 2 1/10W R106 330 1 2 R103 20k 1 2 R131 10k 12 1/10W R105 330 1 2 R130 10k 12 R117 10k 12 R104 2.2k 1 2 R102 10k 1 2 R137 4.7k 1 2 R101 10k 1 2 R109 15 1 2 R108 15 1 2 R121 22 1 2 R136 10k 1 2 R116 10k 1 2 R135 10k 1 2 IC101 SAF3602EL/V3040BK 051463300 U14 RESET_N B16 XTAL_MODE_SEL G1 XTAL_IN G2 XTAL_OUT A15 XTAL_P A16 XTAL_N A13 XTAL_OUT_P A14 XTAL_OUT_N T17 ADC_REF_N R17 ADC_REF_P C1 BI2S0_BCK B1 BI2S0_SDIO_I B2 BI2S0_SDIO_Q C2 BI2S0_WS D1 BI2S1_BCK E1 BI2S1_SDIO_I E2 BI2S1_SDIO_Q D2 BI2S1_WS U7 I2C0_SCL T7 I2C0_SDA U8 I2C1_SCL T8 I2C1_SDA A5 I2S_SCK A6 I2S_SD B6 I2S_WS A4 TI2S_SCK A3 TI2S_SD0 A2 TI2S_SD1 B4 TI2S_SD2 B5 TI2S_WS B8 TMS B10 TRSTN A8 n.c. A10 TCK A9 TDI B9 TDO D17 LBAND_IN D16 LBAND_ATT1 C16 LBAND_ATT2 H17 VHF_MAIN_IN_P G17 VHF_MAIN_IN_N H16 VHF_MAIN_IN_CM E17 VHF_AUX_IN_P F17 VHF_AUX_IN_N F16 VHF_AUX_IN_CM T5 UART_TX U5 UART_RX J16 VREG_SENSE K16 VREG_CONTROL T14 VQPS T16 TEST2_N U16 TEST2_P P16 TEST1_N P17 TEST1_P U3 SPI2_SSN U2 SPI2_SCLK T1 SPI2_MOSI T2 SPI2_MISO N2 SPI1_SSN N1 SPI1_SCLK M1 SPI1_MOSI M2 SPI1_MISO K2 SPI0_SSN K1 SPI0_SCLK J1 SPI0_MOSI J2 SPI0_MISO T6 GPIO15 U6 GPIO14 T4 GPIO13 U4 GPIO12 P2 GPIO11 P1 GPIO10 L2 GPIO9 L1 GPIO8 T10 GPIO7 U10 GPIO6 T11 GPIO5 U11 GPIO4 T12 GPIO3 U12 GPIO2 T13 GPIO1 U13 GPIO0 IC101 SAF3602EL/V3040BK H2 VSS_A R15 VSSA_ADC_1 U17 VSSA_ADC_2 B13 VSSA_ADPLL1 L16 VSSA_ADPLL2 A17 VSSA_DIV_1 C15 VSSA_DIV_2 C17 LBGND J17 VSSA_LVHF L17 VSSA_VREG B14 VSSA_XTAL B7 VSS_C_1 F2 VSS_C_2 R2 VSS_C_3 B11 VSSD_ADPLL1 N16 VSSD_ADPLL2 T15 VSSD_RFE A1 VSS_IO_1 C3 VSS_IO_2 R3 VSS_IO_3 U1 VSS_IO_5 T9 VSS_IO_4 U9 VDD_IO_3 T3 VDD_IO_2 B3 VDD_IO_1 R1 VDD_C_3 F1 VDD_C_2 A7 VDD_C_1 K17 VDDA_VREG_3V3 U15 VDDD_RFE_1V8 N17 VDDD_ADPLL2_1V8 A11 VDDD_ADPLL1_1V8 B15 VDDA_XTAL_1V8 G16 VDDA_VHFM_1V8 E16 VDDA_LVHFA_1V8 B17 VDDA_DIV_1V8 M16 VDDA_DCO2_1V8 B12 VDDA_DCO1_1V8 M17 VDDA_ADPLL2_1V8 A12 VDDA_ADPLL1_1V8 R16 VDDA_ADC_1V8 H1 VDD_A IC101 SAF3602EL/V3040BK D5 VSSC_TB_1 D6 VSSC_TB_2 D7 VSSC_TB_3 D8 VSSC_TB_4 D9 VSSC_TB_5 D10 VSSC_TB_6 E5 VSSC_TB_7 E6 VSSC_TB_8 E7 VSSC_TB_9 E8 VSSC_TB_10 E9 VSSC_TB_11 E10 VSSC_TB_12 F5 VSSC_TB_13 F6 VSSC_TB_14 F7 VSSC_TB_15 F8 VSSC_TB_16 F9 VSSC_TB_17 F10 VSSC_TB_18 G5 VSSC_TB_19 G6 VSSC_TB_20 G7 VSSC_TB_21 G8 VSSC_TB_22 G9 VSSC_TB_23 G10 VSSC_TB_24 H5 VSSC_TB_25 H6 VSSC_TB_26 H7 VSSC_TB_27 H8 VSSC_TB_28 H9 VSSC_TB_29 H10 VSSC_TB_30 J5 VSSC_TB_31 J6 VSSC_TB_32 J7 VSSC_TB_33 J8 VSSC_TB_34 J9 VSSC_TB_35 J10 VSSC_TB_36 K5 VSSC_TB_37 K6 VSSC_TB_38 K7 VSSC_TB_39 K8 VSSC_TB_40 K9 VSSC_TB_41 K10 VSSC_TB_42 L5 VSSC_TB_43 L6 VSSC_TB_44 L7 VSSC_TB_45 L8 VSSC_TB_46 L9 VSSC_TB_47 L10 VSSC_TB_48 M5 VSSC_TB_49 M6 VSSC_TB_50 M7 VSSC_TB_51 M8 VSSC_TB_52 M9 VSSC_TB_53 M10 VSSC_TB_54 P13 VSSA_TB_33 P12 VSSA_TB_32 P11 VSSA_TB_31 N13 VSSA_TB_30 N12 VSSA_TB_29 N11 VSSA_TB_28 M13 VSSA_TB_27 M12 VSSA_TB_26 M11 VSSA_TB_25 L13 VSSA_TB_24 L12 VSSA_TB_23 L11 VSSA_TB_22 K13 VSSA_TB_21 K12 VSSA_TB_20 K11 VSSA_TB_19 J13 VSSA_TB_18 J12 VSSA_TB_17 J11 VSSA_TB_16 H13 VSSA_TB_15 H12 VSSA_TB_14 H11 VSSA_TB_13 G13 VSSA_TB_12 G12 VSSA_TB_11 G11 VSSA_TB_10 F13 VSSA_TB_9 F12 VSSA_TB_8 F11 VSSA_TB_7 E13 VSSA_TB_6 E12 VSSA_TB_5 E11 VSSA_TB_4 D13 VSSA_TB_3 D12 VSSA_TB_2 D11 VSSA_TB_1 P10 VSSC_TB_66 P9 VSSC_TB_65 P8 VSSC_TB_64 P7 VSSC_TB_63 P6 VSSC_TB_62 P5 VSSC_TB_61 N10 VSSC_TB_60 N9 VSSC_TB_59 N8 VSSC_TB_58 N7 VSSC_TB_57 N6 VSSC_TB_56 N5 VSSC_TB_55 SYS_3.3V X101 55.46667MHz 061360790 4 12 3 ZD101 EZAEG3D80AV 060810750 1 2 SOC_SS 2:2C CPU_ON 2:2C SOC_SCLK 2:2C SOC_MOSI 2:2C DAB_PHANTOM 7A DAB_1.8V 6G DAB_1.8V 6G DAB_1.2V 9G DAB_3.3V 3G MAINTUN_I2S_WS 2:6C DAB_RST 2:6C MAINTUN_I2S_SDATA 2:6B DAB_3.3V 3G DAB_3.3V 3G DAB_1.2V 9G DAB_BOOT 2:6C MAINTUN_I2S_BCLK 2:6B DAB_3.3V 3G DAB_3.3V 11C;4C;5D;6G DAB_1.8V 4A;4B SOC_MISO 2:2C DAB_I2S_BCLK 2:2B DAB_I2S_WS 2:2C DAB_I2S_SDATA 2:2B NF101 DXW21BZ7511TL EPL000400 1 2 34 ANT101 092229200 59S22B-40MT5-F 1 2 NF102 DXW21BZ7511TL EPL000400 1 2 34 C147 0.001uF 50V 1 …

Text truncated - open the document above for the full version.

Page 1 of 101 Test Report Verified code: Report No.: E20240822625802-3 Customer: Faurecia Clarion Electronics (Xiamen) Co., Ltd. Address: 6F,No.40,Guanri Road, Software Park Stage II, Xiamen, China Sample Name: CAR AUDIO Sample Model: P2401 Receive Sample Date: Sep.03,2024 Test Date: Sep.14,2024 ~ Nov.13,2024 Reference Document: 47 CFR Part 15 Subpart C Intentional Radiators Test Result: Pass Prepared by: Reviewed by: Approved by: Huang Lifang Wu Haoting Xiao Liang GRG METROLOGY & TEST GROUP CO., LTD. Issued Date: GRG METROLOGY & TEST GROUP CO., LTD. Address: No.163,Pingyun Road, West of Huangpu Avenue, Guangzhou, Guangdong, China Tel：（+86）400-602-0999 FAX：（+86）020-38698685 Web：http://www.grgtest.com 669556 2024-11-15 Report No.: E20240822625802-3 Page 2 of 101 Statement 1. The report is invalid without "special seal for inspection and testing"; some copies are invalid; The report is invalid if it is altered or missing; The report is invalid without the signature of the person who prepared, reviewed and approved it. 2. The sample information is provided by the client and responsible for its authenticity; The content of the report is only valid for the samples sent this time. 3. When there are reports in both Chinese and English, the Chinese version will prevail when the language problems are inconsistent. 4. If there is any objection concerning the report, please inform us within 15 days from the date of receiving the report. 5. This testing report is only for scientific research, teaching, internal quality control, etc. ——Blank space below this page—— Report No.: E20240822625802-3 Page 3 of 101 TABLE OF CONTENTS 1. TEST RESULT SUMMARY .......................................................................................................................... 6 2. GENERAL DESCRIPTION OF EUT............................................................................................................. 7 2.1 APPLICANT ................................................................................................................................... 7 2.2 MANUFACTURER ........................................................................................................................ 7 2.3 FACTORY ...................................................................................................................................... 7 2.4 BASIC DESCRIPTION OF EQUIPMENT UNDER TEST ........................................................... 7 2.5 TEST OPERATION MODE ........................................................................................................... 8 2.6 LOCAL SUPPORTIVE .................................................................................................................. 9 2.7 CONFIGURATION OF SYSTEM UNDER TEST ........................................................................ 9 2.8 DUTY CYCLE .............................................................................................................................. 10 3. LABORATORY AND ACCREDITATIONS .............................................................................................. 11 3.1 LABORATORY ............................................................................................................................ 11 3.2 ACCREDITATIONS .................................................................................................................... 11 4. MEASUREMENT UNCERTAINTY ........................................................................................................... 12 5. LIST OF USED TEST EQUIPMENT AT GRGT ........................................................................................ 13 6. E.U.T. TEST CONDITIONS ........................................................................................................................ 14 7. 20dB BANDWIDTH ..................................................................................................................................... 16 7.1 LIMITS .......................................................................................................................................... 16 7.2 TEST PROCEDURES .................................................................................................................. 16 7.3 TEST SETUP ................................................................................................................................ 16 7.4 TEST RESULTS ........................................................................................................................... 17 8. CARRIER FREQUENCIES SEPARATED .................................................................................................. 23 8.1 LIMITS .......................................................................................................................................... 23 8.2 TEST PROCEDURES .................................................................................................................. 23 8.3 TEST SETUP ................................................................................................................................ 23 8.4 TEST RESULTS ........................................................................................................................... 24 9. HOPPING CHANNEL NUMBER ............................................................................................................... 27 9.1 LIMITS .......................................................................................................................................... 27 9.2 TEST PROCEDURES .................................................................................................................. 27 9.3 TEST SETUP ................................................................................................................................ 27 9.4 TEST RESULTS ................................................................................................................…

Text truncated - open the document above for the full version.

Report No.: E20240822625802-3 Page 54 of 101 2DH5_Ant1_2402 MHz _30 MHz ~1000 MHz 2DH5_Ant1_2402 MHz _1000 MHz ~26500 MHz Report No.: E20240822625802-3 Page 55 of 101 2DH5_Ant1_2441 MHz _0~Reference 2DH5_Ant1_2441 MHz _30 MHz ~1000 MHz Report No.: E20240822625802-3 Page 56 of 101 2DH5_Ant1_2441 MHz _1000 MHz ~26500 MHz 2DH5_Ant1_2480 MHz _0~Reference Report No.: E20240822625802-3 Page 57 of 101 2DH5_Ant1_2480 MHz _30 MHz ~1000 MHz 2DH5_Ant1_2480 MHz _1000 MHz ~26500 MHz Report No.: E20240822625802-3 Page 58 of 101 3DH5_Ant1_2402 MHz _0~Reference 3DH5_Ant1_2402 MHz _30 MHz ~1000 MHz Report No.: E20240822625802-3 Page 59 of 101 3DH5_Ant1_2402 MHz _1000 MHz ~26500 MHz 3DH5_Ant1_2441 MHz _0~Reference Report No.: E20240822625802-3 Page 60 of 101 3DH5_Ant1_2441 MHz _30 MHz ~1000 MHz 3DH5_Ant1_2441 MHz _1000 MHz ~26500 MHz Report No.: E20240822625802-3 Page 61 of 101 3DH5_Ant1_2480 MHz _0~Reference 3DH5_Ant1_2480 MHz _30 MHz ~1000 MHz Report No.: E20240822625802-3 Page 62 of 101 3DH5_Ant1_2480 MHz _1000 MHz ~26500 MHz ——Blank space below this page—— Report No.: E20240822625802-3 Page 63 of 101 13. RADIATED SPURIOUS EMISSIONS 13.1 LIMITS In any 100kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20dB below that in the 100kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30dB instead of 20dB. Attenuation below the general limits specified in §15.209(a) is not required. Frequency (MHz) Quasi-peak(μV/m) Measurement distance(m) Quasi-peak(dBμV/m)@distance 3m 0.009-0.490 2400/F(kHz) 300 128.5~93.8 0.490-1.705 24000/F(kHz) 30 73.8~63 1.705-30.0 30 30 69.5 30 ~ 88 100 3 40 88~216 150 3 43.5 216 ~ 960 200 3 46 Above 960 500 3 54 NOTE: (1) The emission limits for the ranges 9-90kHz and 110-490kHz are based on measurements employing a linear average detector. (2) The lower limit shall apply at the transition frequencies. (3) Above 18GHz test distance is 1m, so the Peak Limit…

Text truncated - open the document above for the full version.