WZA-FC-505-FCCTouch Dimmer

INTRUCTION FOR TOUCH DIMMER Power technology R U LISTED 40G3 C R U Appliance Control FCC ID: WZA-FC-505 Model: FC-504、FC-505、FC-505-2H、FC-505-3、FC-507 Features: 1. Convenient control for accent lights. 2. No fumbling for a switch, just touch the pad! 3. Get 3 level touch dimmer from your accent lighting systems 4. Touch pad may be places in any convenient location. 5. Example:attach under cabinet, set on counter ,on shelf .etc. 6. Touch pad fits any decor. 7. Installs in seconds,No wiring required! Specifications: 120V 60Hz Low Voltage Halogen(12V) Or incandescent(120V) Lights Only For indoor Use Only Touch pad Touch pad can be mounted to any nonconductive surface, mount under a corner of the upper cabinet, set on a counter surface or stick to the side of the cabinet. The touch pad can be also be cut off and the wire tied to any metallic surface tie the touch wire to a cabinet hinge, door knob or any suitable object. Touch wire Low voltage accent lights Dimmer Plug dimmer wire into any convenient wall outlet INSTALLATION: Do not use this dimmer with another dimmer in the same circuit 1. Plug accent light into the dimmer module. 2. Plug dimmer wire into wall outlet . 3. Place the pad in any convenient location. 4. Just touch the pad to advance the light to the next position. 1 st touch is 10% light,2 nd is 50%, the 3 rd touch is 100% Light and the 4 th touch is off . INTRUCTION FOR TOUCH DIMMER Power technology R U LISTED 40G3 C R U Appliance Control FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to the equipment. Such modificatior coule void the user's authority to operate the equipment. This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30MHz.

BlockDiagram Power supply input circuit Step-down circuit Regulator filter circuit Touch signal receiving circuit Dimming driver circuit Wo r k i n g freq 60kHz

WALTEK SERVICES (SHENZHEN) CO., LTD. 深圳市沃特测试技术服务有限公司 Tel: +86-755-83551033 Fax: +86-755-83552400 http://www.waltek.com.cn E-mail: [email protected] Test Lab Attestation Letter This attestation is to confirm that the below listed device was tested at our Test Facilities located at: Test Lab Name: Waltek Services (Shenzhen) Co., Ltd. Test Lab Address: 1/F, Fukangtai Building,West Baima Rd.,Songgang Street, Baoan District, Shenzhen, Guangdong, China Test Lab Registration Number: 880581 Date of Test: May 21~25, 2012 Test Report Number: WT12052825-S-S-F Applicant Name: Zhong Shan Heng Sheng Logistic Co., Ltd. FCC ID: WZA-FC-505-FCC Name of Engineer(s) Performing Test: Zero Zhou Company Name of Engineer(s) Performing Test: Waltek Services (Shenzhen) Co., Ltd. TEST LABORATORY: Signature of Authorized Representative of the Test Laboratory: Full Contact Name: Philo.zhong Position/Title: Manager

Zhong Shan Heng Sheng Logistic Co., Ltd. FCC Authorization Letter Number: CF304 Version: V03 Date: 01-08-2011 We, (the approval holder) Company name Zhong Shan Heng Sheng Logistic Co., Ltd. Address Luosan Industrial District, Fusha Town, City Zhongshan, Guangdong, Country China declare that the following representative (agent): Name (person) Philo Zhong Company name Waltek Services (Shenzhen) Co., Ltd. Address 1/F, Fukangtai Building, West Baima Rd., Songgang Street, Baoan District, City Shenzhen Country China is hereby authorized to apply the following equipment for certification on our behalf: Product Description Touch Dimmer Type or Model(s) FC-504、FC-505、FC-505-2H、FC-505-3、FC-507 Tradename or Brand(s) We also authorize Teleconformity (Mr. M. Koop, Manager Certification, Address: Rietven 31, 7534NH Enschede, the Netherlands) to apply and sign this application for certification, registration or filing on our behalf (as representative agent or certifier). Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Zhongshan，guangdong， China 2012-06-04 Bonnie Lin manager

Page:20 of 22 Zhong Shan Heng Sheng Logistic Co., Ltd. FCC ID: WZA-FC-505-FCC WALTEK SERVICES Reference No.: WT12052825-S-S-F 6 Photographs - Constructional Details 6.1 EUT – External View 6.2 EUT – Internal View

FCC ID Label Sample for Model: FC-504,FC-505,FC-505-2H,FC-505-3,FC-507 FCC ID: WZA-FC-505-FCC This device complies with Part 18 of the FCC Rules.

Page:22 of 22 Zhong Shan Heng Sheng Logistic Co., Ltd. FCC ID: WZA-FC-505-FCC WALTEK SERVICES Reference No.: WT12052825-S-S-F 7 FCC Label This device complies with Part 18 of the FCC Rules. Operation is subject to the following two conditions:(1)this device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation The Label must not be a stick-on paper. The Label on these products must be permanently affixed to the product and readily visible at the time of purchase and must last the expected lifetime of the equipment not be readily detachable. FCC ID: WZA-FC-505-FCC This device complies with Part 18 of the FCC Rules.

Page:21 of 22 Zhong Shan Heng Sheng Logistic Co., Ltd. FCC ID: WZA-FC-505-FCC WALTEK SERVICES Reference No.: WT12052825-S-S-F

Operation Description 1、 Power supply input circuit：By the common-mode inductance and capacitor circuit composed of EMC, Circuit's primary role is to filter out the power cord from the ballast conduction disturbances and resulting in the work conducted interference, Interference power from other electric equipment. 2、 Buck circuit：By the 1PC 1W metal oxidation film resistors composed, Because the current is relatively small, so consider using a resistor direct step-down voltage. 3、 Regulator filter circuit：By the commutation diodes and zener diode composed，the working frequency is 60Hz. 4、 Touch signal receiving circuit: By the 2PCS high voltage porcelain capacitor and zener diode composed Current Limiter resistor composed, As a result of the static human body with the peak may be very great, so with two 2KV capacitor with a current limiting resistor in series to reduce the use of high voltage electrostatic human impact on the circuit components, but also effectively prevented the high-voltage on the human body hurt. 5、Dimming driver circuit: By the TT6061A IC and BT136E SCR composed. Dimming is a dedicated IC TT6061A touch dimmer set to receive signals, touch the number of memory, adjusting the conduction angle BT136E in one multi-functional chip. The principle is to light touch TT6061A signal receiver, and then touch the number of recognition and memory, and finally to control in accordance with the number of BT136E touch of the conduction angle in order to achieve a large load – large/middle/small/off - point, it's total four point in a touch-cycle control. If touch the touch pad, Just touch the pad to advance the light to the next position- large/middle/small/off – point . the EUT have the same PCB layout and the same output voltage DC 12V,but three output power---small lighting/Mid lighting/large lighting, the Max. output power is 200Watt,and the small lighting is 10% light, output power is 20Watt,Mid lighting is 50%, output power is 100Watt, the large lighting is 100%,output power is 200Watt.

      
            
  !!!!"! #  $%&'  ($%&  ()'' *!& 
+,-. /
,0./
,0.  /,-. 
1/ 1
21
2 3

#,-. 3 )/#,-. 
0 

)-% -
0 0 2 0,
4 / 5)2%

53 65)2.
 -5/2 7
55
 -
0 879  : + 5
 87 :%+ !1 .

/
-
,/-. 5
,/-.
 
33
,
9

Page: 1 of 22 FCC TEST REPORT WALTEK SERVICES Reference No.: WT12052825-S-S-F FCC ID. : WZA-FC-505-FCC Applicant : Zhong Shan Heng Sheng Logistic Co., Ltd. Address : Luosan Industrial District, Fusha Town, Zhongshan, Guangdong, China Manufacturer : Zhongshan Deyuan Electric Co., LTD Address : Niao Jiao Industrial District, Fusha Town, Zhongshan, Guangdong, China Equipment Under Test (EUT) : Product Name : Touch Dimmer Model No. : FC-504、FC-505、FC-505-2H、FC-505-3、FC-507 Standards : FCC Part 18 : 2010-10-1 Date of Test : May 21~25, 2012 Date of Issue : May 25, 2012 Test Engineer : Zero Zhou Reviewed By : Philo zhong Test Result : PASS * Prepared By: Waltek Services (Shenzhen) Co., Ltd. 1/F, Fukangtai Building, West Baima Rd., Songgang Street, Baoan District, Shenzhen 518105, China Tel :+86-755-27553488 Fax:+86-755-27553868 * The sample detailed above has been tested to the requirements of Council Directives ANSI C63.4:2003. The test results have been reviewed against the Directives above and found to meet their essential requirements. Page:2 of 22 Zhong Shan Heng Sheng Logistic Co., Ltd. FCC ID: WZA-FC-505-FCC WALTEK SERVICES Reference No.: WT12052825-S-S-F 1 Test Summary Test Test Requirement Test Method Class / Severity Result Radiated Emission (30MHz to 1GHz) FCC PART 18 : 2010-10-1 ANSI C63.4: 2003 Class B PASS Conducted Emission (450KHz to 30MHz) FCC PART 18 : 2010-10-1 ANSI C63.4: 2003 Class B PASS Page:3 of 22 Zhong Shan Heng Sheng Logistic Co., Ltd. FCC ID: WZA-FC-505-FCC WALTEK SERVICES Reference No.: WT12052825-S-S-F 2 Contents 1 COVER PAGE ......................................................................................................................................................... 1 1 TEST SUMMARY .................................................................................................................................................. 2 2 CONTENTS ............................................................................................................................................................. 3 3 GENERAL INFORMATION ................................................................................................................................ 4 3.1 GENERAL DESCRIPTION OF E.U.T. ........................................................................................................................ 4 3.2 DETAILS OF E.U.T. ................................................................................................................................................ 4 3.3 DESCRIPTION OF SUPPORT UNITS .......................................................................................................................... 4 3.4 STANDARDS APPLICABLE FOR TESTING ................................................................................................................. 4 3.5 TEST FACILITY ...................................................................................................................................................... 4 3.6 TEST LOCATION .................................................................................................................................................... 4 4 EQUIPMENT USED DURING TEST .................................................................................................................. 5 4.1 MEASUREMENT UNCERTAINTY ....................................................................................................................... 5 5 EMISSIONS TEST RESULTS .............................................................................................................................. 6 5.1 CONDUCTED EMISSION DATA................................................................................................................................ 6 5.1.1 Test Equipment ........................................................................................................................................... 6 5.1.2 Test Procedure ............................................................................................................................................ 6 5.1.3 Conducted Test Setup.................................................................................................................................. 7 5.1.4 EUT Operating Condition .......................................................................................................................... 7 5.1.5 Conducted Emission Limits ......................................................................................................................... 8 5.1.6 Spectrum Analyzer ...................................................................................................................................... 8 5.1.7 Conducted Emission Test Result ................................................................................................................. 8 5.1.8 Measurement Data ...................................................................................................................................... 8 5.1.9 Photograph –Conducted Emission Test Setup .......................................................................................... 12 5.2 RADIATION EMISSION DATA ................................................................................................................................ 13 5.2.1 Measurement Uncertainty ......................................................................................................................... 13 5.2.2 EUT Setup ................................................................................................................................................. 14 5.2.3 Spectrum Analyzer Setup .......................................................................................................................... 14 5.2.4 Test Procedure ..............................................................................................................................…

Text truncated - open the document above for the full version.

Page:12 of 22 Zhong Shan Heng Sheng Logistic Co., Ltd. FCC ID: WZA-FC-505-FCC WALTEK SERVICES Reference No.: WT12052825-S-S-F 5.1.9 Photograph –Conducted Emission Test Setup Page:19 of 22 Zhong Shan Heng Sheng Logistic Co., Ltd. FCC ID: WZA-FC-505-FCC WALTEK SERVICES Reference No.: WT12052825-S-S-F 5.2.7 Photograph – Radiation Emission Test Setup