X4QKDTC630Data Communicator

1/12 KDTC630 KOMTRAX Terminal KOMTRAX Terminal KOMTRAX Terminal KOMTRAX Terminal Instruction Manual Instruction Manual Instruction Manual Instruction Manual Model ModelModel Model Name NameName Name TC6 TC6TC6 TC630 3030 30 Model ModelModel Model No NoNo No． ．． ． KDTC6 KDTC6KDTC6 KDTC630 3030 30 Thank you for your purchasing KOMTRAX terminal (KDTC630). ※KOMTRAX is a machine management system that uses wireless communications. ■ Read this instruction manual and Read this instruction manual and Read this instruction manual and Read this instruction manual and use your KOMTRAX terminal correctly use your KOMTRAX terminal correctlyuse your KOMTRAX terminal correctly use your KOMTRAX terminal correctly ■ ・Operators and service personnel for machines using KOMTRAX should make sure that they read and fully understand this document. ・Keep this document together with the Operation and Maintenance manual for the machine equipped with KOMTRAX, and read it repeatedly. 2/12 KDTC630 Features/Be Features/BeFeatures/Be Features/Before using fore usingfore using fore using
What is KDTC6 What is KDTC6What is KDTC6 What is KDTC630 3030 30 KDTC630 is a communication terminal which is mounted on a vehicle to form a system together with server application software on the base station side and used to control movement of the vehicle and monitor it from a remote place.
Features FeaturesFeatures Features ● KDTC630 uses GSM, GPRS and UMTS, so it can communicate in a lot of countries that they are used. (A communication contract is required in each place where KDTC630 will communicate, however.) ● KDTC630 has GPS function to be able to show the present position of the vehicle on which it is mounted. ● When KDTC630 is connected to the local network in the vehicle, it can collect the information of errors in the vehicle, sensors, and etc.
Before using Before usingBefore using Before using ● Since KDTC630 is a wireless device using radio waves, so it is necessary to obtain authorization and conform to the laws of the country or territory where the machine equipped with KDTC630 is being used. It can be used only countries where use of it is permitted. For the countries where use of KDTC630 is permitted, ask your Komatsu distributor. ● Always contact your Komatsu distributor when exporting or reselling a vehicle equipped with KDTC630. Note that the radio communication function of KDTC630 may be turned off forcibly, when the vehicle is out of the countries or areas where use of KDTC630 is permitted. ● Before using KDTC630, you are required to take some procedures such as application for start of use. For details, ask your Komatsu distributor. ● KOMTRAX system uses wireless communications, so it cannot be used inside tunnels, underground inside buildings, or in mountain areas where radio waves cannot be received. Even when the machine is outside, it cannot be used in areas where the radio signal is weak or in areas outside the wireless communication. ● There is absolutely no need to inspect or operate KDTC630, but if any abnormality is found, please consult your Komatsu distributor. 3/12 KDTC630 Safety precautions Safety precautionsSafety precautions Safety precautions The items to be observed without fail are explained as shown below to prevent an injury to the user and other persons and damage to property. If you do not obey these precautions, neither Komatsu nor your Komatsu distributor can take any responsibility for any problem that is caused or for any loss that results. ■Injuries and damage which can be caused by wrong use of KDTC630 are explained as shown below. ■ The types of the items to be observed are indicated and explained by the following icons. In the column with this mark, an item which "can cause a death or a serious injury to a person" is explained. WARNING WARNINGWARNING WARNING In the column with this mark, an item which "can cause an injury to a person or only damage to property" is explained. CAUTION CAUTIONCAUTION CAUTION This icon indicates an item "to be noted". This icon indicates an item "to be prohibited". This icon indicates an item "to be executed without fail". 4/12 KDTC630 WARNING WARNINGWARNING WARNING Do not install this set to a place where it will be an obstacle to view or operation. .. . Prohibit Installation of this set to a place where it will be an obstacle to view or operation may cause an accident. Do not install this set to a place where temperature rises or lowers extremely or a place where it will receive strong vibration or impacts. Prohibit Neglecting this may cause a skin burn, a trouble, or a fire. Never disassemble, repair, modify, or move the communication terminal, antenna, or cables. Prohibit Neglecting this may cause a trouble, a fire, or an accident. Your Komatsu distributor will carry out removal and installation. Installe the communication terminal at leaset 22cm (8.7 inch) from a operater. .. . For anyone wearing a pacemaker, the radio waves may have an adverse effect on the operation of the pacemaker. Use a battery having rated voltage of DC12V or DC24V to supply DC power to this set. This set is designed to be driven with DC power. Use a power supply in the rated range. Neglecting this may cause a trouble. Connect this set to external devices correctly and securely according to this manual. Neglecting this may cause a trouble or a fire. Install the body of this set securely. If the body is not installed securely, it may fall to cause an injury to a person or an accident. Prohibit 5/12 KDTC630 CAUTION Do not install this set to an outdoor place where it may be exposed to rainwater or seawater. Prohibit This set is not water-resistant. Do not pinch, tense, or damage the cables. Prohibit Neglecting this can cause a short circuit or a disconnection, which may cause a trouble or a fire. Use a specified communication antenna. Use a specified antenna. This set can be used only in countries where use of it is permitted. Prohibit Since this set has a radio device,…

Text truncated - open the document above for the full version.

Test report no.: 1-5825/13-36-01_AnnexA 2013-11-25 Page 1 of 7 Annex A This test report annex is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report annex authorised: David Lang Testing Manager Test report no.: 1-5825/13-36-01_AnnexA 2013-11-25 Page 2 of 7 External photos of the EUT Photo documentation: Photo 1: Photo 2: Test report no.: 1-5825/13-36-01_AnnexA 2013-11-25 Page 3 of 7 Photo 3: Photo 4: Test report no.: 1-5825/13-36-01_AnnexA 2013-11-25 Page 4 of 7 Photo 5: Photo 6: Test report no.: 1-5825/13-36-01_AnnexA 2013-11-25 Page 5 of 7 Photo 7: Photo 8: Test report no.: 1-5825/13-36-01_AnnexA 2013-11-25 Page 6 of 7 Photo 9: Test report no.: 1-5825/13-36-01_AnnexA 2013-11-25 Page 7 of 7 Document history Version Applied changes Date of release 1.0 Initial release 2013-11-25

TC630 6000 630 630 630 Label location

Test report no.: 1-5825/13-30-01_AnnexB 2013-11-25 Page 1 of 8 Annex B This test report annex is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report annex authorised: David Lang Testing Manager Test report no.: 1-5825/13-30-01_AnnexB 2013-11-25 Page 2 of 8 Internal photos of the EUT Photo documentation: Photo 1: Photo 2: Test report no.: 1-5825/13-30-01_AnnexB 2013-11-25 Page 3 of 8 Photo 3: Photo 4: Test report no.: 1-5825/13-30-01_AnnexB 2013-11-25 Page 4 of 8 Photo 5: Photo 6: Test report no.: 1-5825/13-30-01_AnnexB 2013-11-25 Page 5 of 8 Photo 7: Photo 8: Test report no.: 1-5825/13-30-01_AnnexB 2013-11-25 Page 6 of 8 Photo 9: Photo 10: Test report no.: 1-5825/13-30-01_AnnexB 2013-11-25 Page 7 of 8 Photo 11: Test report no.: 1-5825/13-30-01_AnnexB 2013-11-25 Page 8 of 8 Document history Version Applied changes Date of release 1.0 Initial release 2013-11-25

Equipment Model Number: KDTC630 Acc. RSS-102 Issue 4 Chapter 2.5.2: Exemption from Routine Evaluation Limits – RF Exposure Evaluation RF exposure evaluation is required if the separation distance between the user and the device’s radiating element is greater than 20 cm, except when the device operates as follows: - below 1.5 GHz and the maximum e.i.r.p. of the device is equal to or less than 2.5 W; - at or above 1.5 GHz and the maximum e.i.r.p. of the device is equal to or less than 5 W. In these cases, the information contained in the RF exposure technical brief may be limited to information that demonstrates how the e.i.r.p. was derived. Prediction of MPE limit at given distance S = PG / 4 π R 2 where: S = Power density P = Power input to the antenna (including tolerance of tune up procedure of +0.5 dB) G = Antenna gain R = Distance to the center of radiation of the antenna The table below is excerpted from Table 1B of 47 CFR 1.1310 titled “Limits for Maximum Permissible Exposure (MPE), Limits for General Population/Uncontrolled Exposure” Frequency Range (MHz) Power Density (mW/cm 2 ) Averaging Time (minutes) 300 -1500 f/1500 30 1500 - 100000 1.0 30 where f = Frequency (MHz) Prediction: GSM 850 P Max power input to the antenna: 33.60 dBm / 2291 mW R Distance: 20 cm S MPE limit for uncontrolled exposure: 0.56 mW/cm 2 G Antenna gain: 0.76 numerical Calculated Power density: 0.35 mW/cm 2 This prediction demonstrates the following: The power density levels at a distance of 20 cm are below the maximum levels allowed by FCC regulations The radiated power is below the maximum level allowed by IC regulations. Prediction: GSM 1900 P Max power input to the antenna: 30.57 dBm / 1140 mW R Distance: 20 cm S MPE limit for uncontrolled exposure: 1 mW/cm 2 G Antenna gain: 0.98 numerical Calculated Power density: 0.22 mW/cm 2 This prediction demonstrates the following: The power density levels at a distance of 20 cm are below the maximum levels allowed by FCC regulations The radiated power is below the maximum level allowed by IC regulations. Prediction: WCDMA 850 P Max power input to the antenna: 23.93 dBm / 247.2 mW R Distance: 20 cm S MPE limit for uncontrolled exposure: 0.56 mW/cm 2 G Antenna gain: 0.83 numerical Calculated Power density: 0.04 mW/cm 2 This prediction demonstrates the following: The power density levels at a distance of 20 cm are below the maximum levels allowed by FCC regulations The radiated power is below the maximum level allowed by IC regulations. Signature: Date: 2013-11-22 NAME (Please print or type): Dipl.-Ing. (FH) Stefan Bös TITLE (Please print or type): Senior Testing Manager COMPANY (Please print or type): Cetecom ICT Services GmbH

Final Report on Cinterion Wireless Module AH3-W MDE_CINTE_1205_FCCe acc. Title 47 CFR chapter I part 24 subpart E Report Reference: May 11, 2012 Date: Test Laboratory: 7Layers AG Borsigstr. 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7Layers AG Aufsichtsratsvorsitzender Registergericht registered in: Borsigstrasse 11 Chairman of the Supervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Ralf Mertens USt-IdNr  VAT No.: Phone: +49 (0) 2102 749 0 Vorstand Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. H.-J. Meckelburg TAX No. 147/5869/0385 www.7Layers.com Reference: MDE_CINTE_1205_FCCe acc. Title 47 CFR chapter I part 24 subpart E 1Administrative Data 1.1Project Data René Houx Project Responsible: 2012/05/11 Date Of Test Report: 2010/10/12 Date of first test: 2010/11/25 Date of last test: 1.2Applicant Data Company Name: Cinterion Wireless Modules GmbH Siemensdamm 50 Street: 13629 Berlin City: Germany Country: Contact Person: Mr. Thorsten Liebig Manager Approval Function: Approvals & Standardization Department: +49 (30) 31102-8241 Phone: +49 (160) 7074027 Mobile: [email protected] E-Mail: 1.3Test Laboratory Data The following list shows all places and laboratories involved for test result generation: 7 layers DE Company Name : 7 layers AG Street : Borsigstrasse 11 City : 40880 Ratingen Country : Germany Contact Person : Mr. Michael Albert Phone : +49 2102 749 201 Fax : +49 2102 749 444 E Mail : [email protected] Laboratory Details Accreditation InfoLab IDIdentificationResponsible DAkkS-Registration no. D-PL-12140-01-01Radiated Emissions Lab 1Mr. Robert Machulec Mr. Andreas Petz DAkkS-Registration no. D-PL-12140-01-01Radio Lab Lab 2Mr. Robert Machulec Mr. Andreas Petz Page 2 of 167 Reference: MDE_CINTE_1205_FCCe acc. Title 47 CFR chapter I part 24 subpart E 2Test Object Data 2.1General OUT Description The following section lists all OUTs (Object's Under Test) involved during testing. OUT: AH3-W Type / Model / Family: Cinterion Wireless Module AH3-W Product Category: Module ValueParameter name Parameter List: 4.2 (V) DC Power Supply 251 (848.8MHz) for GSM850, 810 (1909.8MHz) for GSM1900, 4233 (846.6MHz) for FDD5 highest channel 128 (824.2MHz) for GSM850, 512 (1850.2MHz) for GSM1900, 4132 (826.4MHz) for FDD5 lowest channel 190 (836.6MHz) for GSM850, 661 (1880.0MHz) for GSM1900, 4183 (836.6MHz) for FDD5 mid channel OUT: Cinterion Wireless Module PH8 Type / Model / Family: Cinterion Wireless Module PH8 Product Category: Module ValueParameter name Parameter List: Parameter for Scope FCC_v2: 4.2 (V) DC Power Supply 251 (848.8MHz) for GSM850, 810 (1909.8MHz) for GSM1900, 4233 (846.6MHz) for FDD5, 9538 (1907.6MHz) for FDD2, 1513 (1752.6MHz) for FDD4 highest channel 128 (824.2MHz) for GSM850, 512 (1850.2MHz) for GSM1900, 4132 (826.4MHz) for FDD5, 9262 (1852.4MHz)for FDD2, 1312 (1712.4MHz) for FDD4 lowest channel 190 (836.6MHz) for GSM850, 661 (1880.0MHz) for GSM1900, 4183 (836.6MHz) for FDD5, 9400 (1880MHz) for FDD2, 1412 (1732.4MHz)/1450 (1740.0MHz) for FDD4 mid channel Page 4 of 167 Reference: MDE_CINTE_1205_FCCe acc. Title 47 CFR chapter I part 24 subpart E 2.2Detailed Description of OUT Samples Sample : AH3-W OUT Identifier AH3-W Sample Description Sample #01 Serial No. M30960N2340A100 HW Status B2 SW Status REVISION 00.360 Low VoltageLow Temp. 3.3 V-10 °C High Temp.High Voltage 4.2 V+55 °C Normal Temp.Nominal Voltage 4.2 V+23 °C Parameter List: ValueParameter Description Parameter for Scope FCC_v2 IMEI004401080582717 Sample : G02 OUT Identifier Cinterion Wireless Module PH8 Sample Description HW Status B2 SW Status Revision 00.290 Date of Receipt 2010/10/11 Low VoltageLow Temp. 3.3 V-10 °C High Temp.High Voltage 4.2 V+55 °C Normal Temp.Nominal Voltage 4.2 V+22 °C Sample : Q03 OUT Identifier Cinterion Wireless Module PH8 Sample Description HW Status B2.1 SW Status Revision 00.330 Date of Receipt 2010/11/02 Low VoltageLow Temp. 3.3 V-10 °C High Temp.High Voltage 4.2 V+55 °C Normal Temp.Nominal Voltage 4.2 V+22 °C Page 5 of 167 Reference: MDE_CINTE_1205_FCCe acc. Title 47 CFR chapter I part 24 subpart E Sample : Y06 OUT Identifier Cinterion Wireless Module PH8 Sample Description HW Status B2.2 SW Status Revision 00.360 Date of Receipt 2010/11/23 Low VoltageLow Temp. 3.3 V-10 °C High Temp.High Voltage 4.2 V+55 °C Normal Temp.Nominal Voltage 4.2 V+22 °C Page 6 of 167 Reference: MDE_CINTE_1205_FCCe acc. Title 47 CFR chapter I part 24 subpart E 2.3OUT Features Features for OUT:AH3-W Allowed ValuesDesignationDescriptionSupported Value(s) Features for scope: FCC_v2 AC The OUT is powered by or connected to AC Mains DC The OUT is powered by or connected to DC Mains EDGE850 EUT supports EDGE in the band 824 MHz - 849 MHz EDGE1900 EUT supports EDGE in the band 1850 MHz - 1910 MHz FDD2 EUT supports UMTS FDD2 in the band 1850 MHz - 1910 MHz FDD5 EUT supports UMTS FDD5 in the band 824 MHz - 849 MHz GSM850EUT supports GSM850 band 824MHz - 849MHz HSDPA- FDD5 EUT supports UMTS FDD5 HSDPA in the band 824 MHz - 849 MHz HSUPA- FDD5 EUT supports UMTS FDD5 HSUPA in the band 824 MHz - 849 MHz PantC permanent fixed antenna connector, which may be built-in, designed as an indispensable part of the equipment PCS1900 EUT supports PCS1900 band 1850MHz - 1910MHz Features for OUT:Cinterion Wireless Module PH8 Allowed ValuesDesignationDescriptionSupported Value(s) Features for scope: FCC_v2 AC The OUT is powered by or connected to AC Mains DC The OUT is powered by or connected to DC Mains EDGE850 EUT supports EDGE in the band 824 MHz - 849 MHz EDGE1900 EUT supports EDGE in the band 1850 MHz - 1910 MHz FDD2 EUT supports UMTS FDD2 in the band 1850 MHz - 1910 MHz FDD4 EUT supports UMTS FDD4 in the band 1710 MHz - 1755 MHz FDD5 EUT supports UMTS FDD5 in the band 824 MHz - 849 MHz GSM850EUT supports GSM850 band 824MHz - 849MHz HSDPA…

Text truncated - open the document above for the full version.

2013-11-26 Page 1 of 33 TEST REPORT Test report no.: 1-5825/13-30-08-C Testing laboratory Applicant CETECOM ICT Services GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.cetecom.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12076-01-01 Area of Testing: Radio Communications & Compatibility Testing (RCT) KOMATSU Ltd. 3-25-1 Shinomiya 254-8555 Hiratsuka, Kanagawa / JAPAN Phone: Fax: 0463-22-8586 Contact: Yasunori Kimura e-mail: [email protected] Phone: 0463-22-8576 Manufacturer KOMATSU Ltd. 3-25-1 Shinomiya 254-8555 Hiratsuka, Kanagawa / JAPAN Test standard/s 47 CFR Part 22 Title 47 of the Code of Federal Regulations; Chapter I; Part 22 - Public mobile services 47 CFR Part 24 Title 47 of the Code of Federal Regulations; Chapter I; Part 24 - Personal communications services For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: Cellular terminal for construction machine Model number: KDTC630 FCC ID: X4QKDTC630 IC: 4472A-KDTC630 Frequency: GSM: 824.2 – 848.8 MHz, 1850.2 – 1909.8 MHz UMTS: 826.4 – 846.6 MHz Technology tested: GSM, UMTS Antenna: External antenna Power supply: 24.0 V DC Temperature range: +23°C This test report is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorised: Test performed: p.o. Marco Bertolino Stefan Bös Testing Manager Senior Testing Manager Test report no.: 1-5825/13-30-0C 2013-11-26 Page 2 of 33 1 Table of contents 1 Table of contents ............................................................................................................................................ 2 2 General information ....................................................................................................................................... 3 2.1 Notes and disclaimer .......................................................................................................................... 3 2.2 Application details ............................................................................................................................... 3 3 Test standard/s ............................................................................................................................................... 3 4 Test environment ............................................................................................................................................ 4 5 Test item .......................................................................................................................................................... 4 5.1 Additional information ........................................................................................................................ 4 6 Test laboratories sub-contracted ................................................................................................................. 4 7 Summary of measurement results ............................................................................................................... 5 7.1 GSM 850 ................................................................................................................................................ 5 7.2 PCS 1900 .............................................................................................................................................. 5 7.3 UMTS band V........................................................................................................................................ 6 8 RF measurements .......................................................................................................................................... 7 8.1 Description of test setup .................................................................................................................... 7 8.1.1 Radiated measurements............................................................................................................. 7 8.2 Results GSM 850 ................................................................................................................................. 8 8.2.1 RF output power ......................................................................................................................... 8 8.2.2 Frequency stability .................................................................................................................... 10 8.2.3 Spurious emissions radiated .................................................................................................... 11 8.2.4 Spurious emissions conducted ................................................................................................. 14 8.2.5 Block edge compliance ............................................................................................................. 14 8.2.6 Occupied bandwidth ................................................................................................................. 14 8.3 Results PCS 1900 .............................................................................................................................. 15 8.3.1 RF output power ....................................................................................................................... 15 8.3.2 Frequency stability .................................................................................................................... 17 8.3.3 Spurious emissions radiated ..............................................................................…

Text truncated - open the document above for the full version.

Test report no.: 1-5825/13-30-01_AnnexC 2013-11-25 Page 1 of 7 Annex C This test report annex is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report annex authorised: David Lang Testing Manager Test report no.: 1-5825/13-30-01_AnnexC 2013-11-25 Page 2 of 7 Test setup photos Photo documentation: Photo 1: Photo 2: Test report no.: 1-5825/13-30-01_AnnexC 2013-11-25 Page 3 of 7 Test report no.: 1-5825/13-30-01_AnnexC 2013-11-25 Page 4 of 7 Photo 3: Photo 4: Test report no.: 1-5825/13-30-01_AnnexC 2013-11-25 Page 5 of 7 Photo 5: Photo 6: Test report no.: 1-5825/13-30-01_AnnexC 2013-11-25 Page 6 of 7 Photo 7: Test report no.: 1-5825/13-30-01_AnnexC 2013-11-25 Page 7 of 7 Document history Version Applied changes Date of release 1.0 Initial release 2013-11-25