X4YHACOP20SSolar PTZ Camera

Tuya Smart application WIFI antenna On-off key 5W solar panel bracket 1*bracket 1*Ball machine bracket 4*Hand tighten the screws 7*Tapping Screws 1*power cable Solar PTZ Camera User Manua (1)Can I share with family and friends? Yes, you can share your cameras with family and friends who will have access to view the camera and control your bulbs, plugs, and other devices. In the app, click the Family name at the top and click on the“Home Management” button, and you will be able to give or revoke sharing permissions. In order to share, the other user should already have downloaded the app and registered a new account. (2) What's the Wireless Range? The range of your home Wi-Fi is heavily dependents on your home router and the conditions of the room. Check with your router specifications for exact range data. (3) How many cameras can I control? Tuya Smart app can control an unlimited amount of devices in an unlimited amount of locations. Your router may have a limit of how many devices can be connected to one router. (4) My device can't be connected to network with App • Make sure the device is under the config status (indicator light is flashing quickly). • Make sure the Wi-Fi is avaliable and the device is not far away from the router. • Make sure the Wi-Fi password you input is correct. (5) My device shows ofline in my App • Make sure the device is powered on. Make sure the network is stable and the Wi-Fi name and password not modifed. If not, add device again. If the network is normal, but its still offine. Check if there are too many Wi-Fi connections. You can restart your router to check the status of the device. (6)My phone cannot be added as a device First, confirm that the device is turned on normally and the WI-FI signal is 2.4GHZ. If you still cannot connect, please press and hold the reset button at the bottom of the device for 12 seconds. After hearing the voice prompt, wait for 10 seconds and the device will restart. See The device prompt light flashes red and green, just connect to the phone again! Frequently Asked Questions with SelectSmart Camera(Wi-Fi) Connecting Device, make sure camera device is near the routeradded successfully click on DoneYou will get into home page. Select your "Wi-Fi Network Name" and then Password, and then click OK. The product only supports 2.4GHz WiFi. Scan the QR Code on your phone with camera.Heard a prompt tone, then click “I Heard a Prompt”. Open TuyaSmart APP, click“+”on the top right corner of the page“HOME” then select “Add Device”. Select camera & Lock Then select smart camera (Wi-Fi) Follow the steps in the APP to reset the camera. Select "QR code for camera" to add your device by QR code. Check the prompt then click “Next” Select to register place FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user'sauthority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception,which can be determined by turning theeauioment off and on. the user is encouraged to try to correct the interference by one or more of the followina measures': -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC's RF Exposure quidelines, This equipment should be installed and operated withminimum distance between 20cm the radiator your body: Use only the supplied antenna.

NEXXT SOLUTIONS U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: NEXXT SOLUTIONS FRN: 0019499201 Contact Name: Albert Mizrachi Address: 3505 N.W 107TH AVE. MIAMI, Florida 33178, United States Telephone No: 786-280-7600 Email: [email protected] This letter is to confirm that we (NEXXT SOLUTIONS) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: 2024/03/26 Signed by (Printed Name/Title): Albert Mizrachi / Vice president of product development The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: NEXXT SOLUTIONS FCC ID:X4YHACOP20S Email: [email protected] Contact Name: Albert Mizrachi Address: 3505 N.W 107TH AVE. MIAMI, Florida 33178, United States Telephone No: 786-280-7600 NEXXT SOLUTIONS Applicant Signature Date: 2024/03/26 Signed by (Printed Name/Title): Albert Mizrachi / Vice president of product development

NEXXT SOLUTIONS 2024.03.26 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for X4YHACOP20S [NEXXT SOLUTIONS] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Applicant printed name): Albert Mizrachi NEXXT SOLUTIONS 2024.03.27 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for X4YHACOP20S [NEXXT SOLUTIONS (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name): Albert Mizrachi

NEXXT SOLUTIONS 2024.03.27 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Solar PTZ Camera Trademark: N/A MODEL: NHC-OP20S FCC ID: X4YHACOP20S To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title : Albert Mizrachi / Vice president of product development Contact information / address: 3505 N.W 107TH AVE. MIAMI, Florida 33178, United States.

NEXXT SOLUTIONS 2024.03.27 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title : Albert Mizrachi / Vice president of product development Contact information / address: 3505 N.W 107TH AVE. MIAMI, Florida 33178, United States.

External Photos

Label & label location 30mm*20mm Label location

Internal Photos Antenna

FCC §15.247 (i), §2.1091 – RF Exposure FCC ID: X4YHACOP20S Applied procedures / limit According to FCC §15.247(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 Note: ƒ is frequency in MHz * = Power density limit is applicable at frequencies greater than 100 MHz Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz * = Plane-wave equivalent power density MPE PREDICTION Predication of MPE limit at a given distance, Equation from OET Bulletin 65, Edition 97-01 Where: S = power density P = power input to antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna, R=0.2m TEST RESULTS Tune up Produce power Maximum peak output power (dBm) Output power to antenna (mW) Antenna Gain (numeric) Power Density (S) (mW/ cm2) Limit (mW/ cm2) Result WIFI 13±1 14 25.12 1.945 (2.89dBi) 0.09720 1 Pass

-./012 !8悦信通科技)*+, 3 4 567: = >?@AB: 2.4GHzCDEF 4 5./GHI 45./67: 2.4GHzCDEF JKL 45?@ABI 2.4G3DBI- !"!$280%3mm"&'"()1. 13mm MI NOPNQR 4501LMI 0 1STI 4 U@ 4 VU@ W OPNXY 视峰科技 1.01.10.00054 Manufacturer:Shenzhen Zigxico Technology Co., Ltd. Address:201, Building B, Jingwan Aquatic Industry Zone, Gushu Community, Xixiang Street, Bao'an District, Shenzhen !-悦信通科技)*+, !" :;<Cust omer=: @A<Product=: 2.4GHz#$%&(L=280mm) BC<Model=: DC<Part Number=: 2023-05-20 , -. ENGINEER R &D DEP EFG<Written By =: HIJK<Issued Date=: * +CUSTOMER T / 0. QUALITY D EPT 12 APPROVED Free Walk 34 R&D DEPT ,-. ENGINEER R &D DEPT 12 APPROVED 田工 田工 视峰科技 1.01.10.00054 w91 !-悦信通科技)*+, (:;<=>? F /GB (:;<HI JB ;<K G ( :AB ;<LM ;<NOPQ RS/TU CD VW !-悦信通科技)*+, X I Index YZ [\ <Cover=]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]1 ^ Z (:;<=>?(Document Change Resume)]]]]]]]]]]]]]]]]2 Indexa ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]_ZXI`]]3 bZcDde`The bas ic par ametersa]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]4 五 、工程图纸（ ProductDrawing ） ························· 5 i ZjklV`TestEquipment &Conditionsa]]]]]]]]]]]]]]]]]]]]]]6 7-m Znojkpq`Test Reporta]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]10 rZ t Z RoHSpqu@`RoHS report lista]]]]]]]]]]]]]]]]]]]]]]]]] (Antenna Picture)]]]]]]]]]]]]]]]]]]]]]]]]]]]]]1%&gs1 12 v Z wxyz`TEE PACKING WAYa]]]]]]]]]]]]]]]]]]]]]]]]]]]]]13 !-悦信通科技)*+, The basic pa rameters A. Elect rica l Charact erist ics Frequency 2400 MHz ~2500MHz VSWR {2 Efficiency >60% Impedance 50 Ohm Pol arizat ion Linear Gai n 2dBi|1 B. Material & Mecha ni cal Characteristics Mat erial of Radiat or Cable Type }1. 13mmBlac k C. Envi ronmental Operat ion Temperat ure - 20 ̊C ~ + 60 ̊C Stor age Temperat ure - 40 ̊C ~ + 80 ̊C 工程图纸 Product Drawing !-悦信通科技)*+, Test Equipment & Conditi ons 1 Network Analyzers : Agilent 8753D 5071C 2 Communicat ions Test Set: Agilent 8960 CMW500 3 3D Chamber Test Sys tem !-悦信通科技)*+, jke! SWR Smit h !-悦信通科技)*+, "#&$%: Effi cency&Gain Freq(MHz) Effi(%) Gain(dBi) 2400 78.11 2.89 2410 72.92 2.42 2420 70.83 2.26 2430 70.92 2.13 2440 74.66 2.50 2450 73.87 2.62 2460 73.71 2.59 2470 78.62 2.46 2480 79.16 2.52 2490 73.55 2.03 2500 71.22 2.03 !-悦信通科技)* +, y&g(3Dga Patten 2400MHz 2450MHz 2500MHz !-悦信通科技)*+, y&g(2Dga Patten XOYL ZOXL ZOYL !-悦信通科技)*+, MNOP  ᒿ ␡ൣ市悦信通科技有限ޜਨ:,),ཙ㓯⢙ᯉ䜘Ԧ52+6ᣕ੺␵অ ਧ৏ᶀᯉ਽〠 ৏ᶀᯉ׋ᓄ୶˄⭏ ӗলᇦ˅ ⍻䈅ᵪᶴᣕ੺㕆ਧỰ⍻ᰕᵏỰ⍻ࡠᵏᰕᵏ 䭑㓯␡ൣ⌠Ⓚ6*6&$1(& 䭑宀䶂䬌&3点䠁䬌ъ6*6&$1(& )5 䠁ᆹഭ㓚6*61*%0/ 73(ᆷ䛖6*6&$1(& + 哴䬌ߌབྷ䠁኎6=;(&6*6 㓯ᶀඔѵ6*6&$1(&    㾱≲˖ 䈤䘱ݳಘԦᶀᯉᣕ੺ᗵ享ᱟ᤹➗⅗ⴏ㩭ᇎ㾱≲᣶ࡠ࠶нਟ᣶࠶ᣔ⨶ᯩ⌅઼਽ᆇᶀᯉⲴỰ⍻ᣕ੺ˈަԆⲴ⧟؍⌅㿴ṸˈަԆⲴ㾱≲⍻䈅  н᧕ ᡰ䘱ݳಘԦᶀᯉˈ㤕ᱟỰ⍻ᣕ੺ˈᗵ享वᤜᶴᡀ৏䇑Ԧˈᡰᴹᶀᯉ᤹䜘䰘ᡰᴹव㻵ᶀᯉˈ矢Ӕ䠁኎ᄬᶀ䍘н᧕ਇԫօᖒᔿⲴ᧗ࡦᣕ੺ˈᒭ唈᧕ਇй⿽ԕ޵ਜ਼й⿽␧⍻ᣕ੺ˈ䎵䗷й⿽ ਇ ᵜޜਨ䇔ਟྲлҍᇦỰ⍻ᵪᶴᨀ׋Ⲵᣕ੺ˈ 6*6& 7,,76䎋 ᇍ䈪ቬˈ&&,&ˈEYˈ676ˈVHW ᡰᴹ㤕ᱟỰ⍻ᣕ੺俆亥䴰ⴆㄐᵜޜਨޜㄐח䶒࣐ⴆ僁㕍ㄐᱟ਴аԭᣕ੺ˈнᗇ⎲᭩՚䙐ᨀ׋ԧᣕ੺ˈ׋䍗୶ᨀ׋ᣕ੺ˈᗵ享ݸ 㠚㹼ᇑṨˈ⺞؍ᡰ䘱ᣕ੺ᴹ᭸↓⺞ᆼᮤˈ޵ᇩ␵Რਟ䗘 ↔༴ⴆޜㄐ ᨀ׋ᣕ੺㾱≲⭥ᆀẓ˖ᣕ੺ਟԕ␵অа䎧ᢛ᧿˗ҏਟԕ࠶ᔰᢛ᧿ˈն㾱ሩᓄ㕆ਧˈԕׯḕ䈒 深圳市恒信通科技有限公司

No.：BCTC/RF-EMC-005 Page: 1 of 71 Edition：B.1 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2403124372E Applicant: NEXXT SOLUTIONS Product Name: Solar PTZ Camera Test Model: NHC-OP20S Tested Date: 2024-03-22 to 2024-04-01 Issued Date: 2024-04-01 Report No.: BCTC2403124372E No.：BCTC/RF-EMC-005 Page: 2 of 71 Edition：B.1 FCC ID:X4YHACOP20S The test report is effective only with both signature and specialized stamp.This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full.The tested sample(s) and the sample information are provided by the client. Product Name: Solar PTZ Camera Trademark: N/A Model/Type Reference: NHC-OP20S Prepared For: NEXXT SOLUTIONS Address: 3505 N.W 107TH AVE. MIAMI, Florida 33178, United States Manufacturer: Sungale Electronics (Shenzhen) Limited Address: No. 1302, DaHong High-Tech Park, No. 6-18, Xinhe Road,Xinqiao, BaoAn,Shenzhen 518125, CHINA Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2024-03-22 Sample Tested Date: 2024-03-22 to 2024-04-01 Issue Date: 2024-04-01 Report No.: BCTC2403124372E Test Standards: FCC Part15.247 ANSI C63.10-2013 Test Results: PASS Remark: This is WIFI-2.4GHz band radio test report. Tested by: Approved by: Tang Changyu/ Project Handler Zero Zhou/Reviewer Report No.: BCTC2403124372E No.：BCTC/RF-EMC-005 Page: 3 of 71 Edition：B.1 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 5 2. Test Summary ....................................................................................................... 6 3. Measurement Uncertainty ..................................................................................... 7 4. Product Information And Test Setup ..................................................................... 8 4.1 Product Information ............................................................................................... 8 4.2 Test Setup Configuration ...................................................................................... 9 4.3 Support Equipment ............................................................................................... 9 4.4 Channel List ........................................................................................................ 10 4.5 Test Mode ........................................................................................................... 10 4.6 Table Of Parameters Of Text Software Setting ................................................... 11 5. Test Facility And Test Instrument Used ............................................................... 12 5.1 Test Facility ......................................................................................................... 12 5.2 Test Instrument Used .......................................................................................... 12 6. Conducted Emissions .......................................................................................... 14 6.1 Block Diagram Of Test Setup .............................................................................. 14 6.2 Limit .................................................................................................................... 14 6.3 Test procedure .................................................................................................... 14 6.4 EUT operating Conditions ................................................................................... 14 6.5 Test Result .......................................................................................................... 15 7. Radiated Emissions ............................................................................................. 17 7.1 Block Diagram Of Test Setup .............................................................................. 17 7.2 Limit .................................................................................................................... 18 7.3 Test procedure .................................................................................................... 19 7.4 EUT Operating Conditions .................................................................................. 20 7.5 Test Result .......................................................................................................... 20 8. Radiated Band Emission Measurement And Restricted Bands Of Operation ..... 26 8.1 Block Diagram Of Test Setup .............................................................................. 26 8.2 Limit .................................................................................................................... 26 8.3 Test procedure .................................................................................................... 27 8.4 EUT Operating Conditions .................................................................................. 27 8.5 Test Result .......................................................................................................... 28 9. Power Spectral Density Test ............................................................................... 29 9.1 Block Diagram Of Test Setup .............................................................................. 29 9.2 Limit .................................................................................................................... 29 9.3 Test procedure .................................................................................................... 29 9.4 EUT Operating Conditions .................................................................................. 29 9.5 Test Result ...................................................…

Text truncated - open the document above for the full version.

Report No.: BCTC2403124372E No.：BCTC/RF-EMC-005 Page: 52 of 71 Edition：B.1 Conducted Emission Measurement Test Graphs Tx. Spurious NVNT b 2412MHz Ref Tx. Spurious NVNT b 2412MHz Emission Report No.: BCTC2403124372E No.：BCTC/RF-EMC-005 Page: 53 of 71 Edition：B.1 Tx. Spurious NVNT b 2437MHz Ref Tx. Spurious NVNT b 2437MHz Emission Report No.: BCTC2403124372E No.：BCTC/RF-EMC-005 Page: 54 of 71 Edition：B.1 Tx. Spurious NVNT b 2462MHz Ref Tx. Spurious NVNT b 2462MHz Emission Report No.: BCTC2403124372E No.：BCTC/RF-EMC-005 Page: 55 of 71 Edition：B.1 Tx. Spurious NVNT g 2412MHz Ref Tx. Spurious NVNT g 2412MHz Emission Report No.: BCTC2403124372E No.：BCTC/RF-EMC-005 Page: 56 of 71 Edition：B.1 Tx. Spurious NVNT g 2437MHz Ref Tx. Spurious NVNT g 2437MHz Emission Report No.: BCTC2403124372E No.：BCTC/RF-EMC-005 Page: 57 of 71 Edition：B.1 Tx. Spurious NVNT g 2462MHz Ref Tx. Spurious NVNT g 2462MHz Emission Report No.: BCTC2403124372E No.：BCTC/RF-EMC-005 Page: 58 of 71 Edition：B.1 Tx. Spurious NVNT n20 2412MHz Ref Tx. Spurious NVNT n20 2412MHz Emission Report No.: BCTC2403124372E No.：BCTC/RF-EMC-005 Page: 59 of 71 Edition：B.1 Tx. Spurious NVNT n20 2437MHz Ref Tx. Spurious NVNT n20 2437MHz Emission Report No.: BCTC2403124372E No.：BCTC/RF-EMC-005 Page: 60 of 71 Edition：B.1 Tx. Spurious NVNT n20 2462MHz Ref Tx. Spurious NVNT n20 2462MHz Emission Report No.: BCTC2403124372E No.：BCTC/RF-EMC-005 Page: 61 of 71 Edition：B.1 13. Duty Cycle Of Test Signal 13.1 Standard Requirement Pre-analysis Check: While conducting average power measurement, duty cycle of each mode shall be checked to ensure its duty cycle in order to compensate for the loss due to insufficient ratio of duty cycle. All duty cycle is pre-scanned, and result as obtained below shows only the most representative ones where duty cycle is conducted as the given transmission with given virtual operation that expresses the percentage. 13.2 Formula Duty Cycle = Ton / (Ton+Toff) 13.3 Test Procedure 1.Set span = Zero 2. RBW = 10MHz 3. VBW = 10MHz, 4. Detector = Peak 13.4 Test Result Test mode Frequency (MHz) Duty Cycle(%) Duty Fator(dB) 802.11b 2412 100 0 2437 100 0 2462 100 0 802.11g 2412 100 0 2437 100 0 2462 100 0 802.11n(HT20) 2412 100 0 2437 100 0 2462 100 0 Report No.: BCTC2403124372E No.：BCTC/RF-EMC-005 Page: 62 of 71 Edition：B.1 Test Graphs Duty Cycle NVNT b 2412MHz Duty Cycle NVNT b 2437MHz Report No.: BCTC2403124372E No.：BCTC/RF-EMC-005 Page: 63 of 71 Edition：B.1 Duty Cycle NVNT b 2462MHz Duty Cycle NVNT g 2412MHz Report No.: BCTC2403124372E No.：BCTC/RF-EMC-005 Page: 64 of 71 Edition：B.1 Duty Cycle NVNT g 2437MHz Duty Cycle NVNT g 2462MHz Report No.: BCTC2403124372E No.：BCTC/RF-EMC-005 Page: 65 of 71 Edition：B.1 Duty Cycle NVNT n20 2412MHz Duty Cycle NVNT n20 2437MHz Report No.: BCTC2403124372E No.：BCTC/RF-EMC-005 Page: 66 of 71 Edition：B.1 Duty Cycle NVNT n20 2462MHz Report No.: BCTC2403124372E No.：BCTC/RF-EMC-005 Page: 67 of 71 Edition：B.1 14. Antenna Requirement 14.1 Limit 15.203 requirement: For intentional device, according to 15.203: an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. 14.1 Test Result The EUT antenna is non-demountable Dipole Antenna,The external interface and shell are integrated,The connector is inside the prototype,fulfill the requirement of this section. Report No.: BCTC2403124372E No.：BCTC/RF-EMC-005 Page: 68 of 71 Edition：B.1 15. EUT Photographs EUT Photo NOTE: Appendix-Photographs Of EUT Constructional Details Report No.: BCTC2403124372E No.：BCTC/RF-EMC-005 Page: 69 of 71 Edition：B.1 16. EUT Test Setup Photographs Conducted emissions Report No.: BCTC2403124372E No.：BCTC/RF-EMC-005 Page: 70 of 71 Edition：B.1 Radiated Measurement Photos Report No.: BCTC2403124372E No.：BCTC/RF-EMC-005 Page: 71 of 71 Edition：B.1 STATEMENT 1. The equipment lists are traceable to the national reference standards. 2. The test report can not be partially copied unless prior written approval is issued from our lab. 3. The test report is invalid without the "special seal for inspection and testing". 4. The test report is invalid without the signature of the approver. 5. The test process and test result is only related to the Unit Under Test. 6. Sample information is provided by the client and the laboratory is not responsible for its authenticity. 7. The quality system of our laboratory is in accordance with ISO/IEC17025. 8. If there is any objection to this test report, the client should inform issuing laboratory within 15 days from the date of receiving test report. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China TEL: 400-788-9558 P. C.: 518103 FAX: 0755-33229357 Website: http://www.chnbctc.com E-Mail: [email protected] ※※※※※ END ※※※※※

16. EUT Test Setup Photographs Conducted emissions Radiated Measurement Photos