X4YXPY12KHD Wireless IP Camera

External Photo (1) EUT Photo (2) EUT Photo (3) EUT Photo (4) EUT Photo (5) EUT Photo (6) EUT Photo (7) EUT Photo (8) EUT Photo (9) EUT Photo

Label Label Location FCC ID: X4YXPY12K

Internal Photo (1) EUT Photo (2) EUT Photo (3) EUT Photo (4) EUT Photo (5) EUT Photo (6) EUT Photo (7) EUT Photo (8) EUT Photo (9) EUT Photo (10) EUT Photo (11) EUT Photo (12) EUT Photo

MRT Technology (Suzhou) Co., Ltd Report No.: 1509RSU00502 Phone: +86-512-66308358 Report Version: V01 Fax: +86-512-66308368 Issue Date: 09-23-2015 Web: www.mrt-cert.com FCC ID: X4YXPY12K Page Number: 1 of 5 RF Exposure Evaluation Declaration FCC ID: X4YXPY12K APPLICANT: NEXXT SOLUTIONS Application Type: Certification Product: HD Wireless IP Camera Model No.: XPY1200 Brand Name: Nexxt Solutions FCC Classification: Digital Transmission System (DTS) Test Date: September 09 ~ 23, 2015 Reviewed By : ( Robin Wu ) Approved By : ( Marlin Chen ) The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standards through the calibration of the equipment and evaluated measurement uncertainty herein. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. Report No.: 1509RSU00502 FCC ID: X4YXPY12K Page Number: 2 of 5 Revision History Report No. Version Description Issue Date 1509RSU00502 Rev. 01 Initial report 09-23-2015 Report No.: 1509RSU00502 FCC ID: X4YXPY12K Page Number: 3 of 5 1. RF Exposure Evaluation 1.1. Limits SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. The equation and threshold in Note 1 must be applied to determine SAR test exclusion. MHz 5 10 15 20 25 mm 150 39 77 116 155 194 SAR Test Exclusion Threshold (mW) 300 27 55 82 110 137 450 22 45 67 89 112 835 16 33 49 66 82 900 16 32 47 63 79 1500 12 24 37 49 61 1900 11 22 33 44 54 2450 10 19 29 38 48 3600 8 16 24 32 40 5200 7 13 20 26 33 5400 6 13 19 26 32 5800 6 12 19 25 31 MHz 30 35 40 45 50 mm 150 232 271 310 349 387 SAR Test Exclusion Threshold (mW) 300 164 192 219 246 274 450 134 157 179 201 224 835 98 115 131 148 164 900 95 111 126 142 158 1500 73 86 98 110 122 1900 65 76 87 98 109 2450 57 67 77 86 96 3600 47 55 63 71 79 5200 39 46 53 59 66 5400 39 45 52 58 65 5800 37 44 50 56 62 Note: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: Report No.: 1509RSU00502 FCC ID: X4YXPY12K Page Number: 4 of 5 [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] * [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison  3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18°C and 78% RH. Report No.: 1509RSU00502 FCC ID: X4YXPY12K Page Number: 5 of 5 1.3. Test Result of RF Exposure Evaluation Product HD Wireless IP Camera Test Item RF Exposure Evaluation Antenna Gain: The maximum Gain measured in fully anechoic chamber is 2.1dBi for 2.4GHz in logarithm scale. Output Power into Antenna: Test Mode Frequency Band (MHz) Maximum output power to antenna (mW) SAR Test Exclusion Threshold (mW) 802.11b/g/n 2412 ~ 2462 9.38 10 Per FCC KDB 447498 D01v05r02, the SAR exclusion threshold for distances<50mm is defined by the following equation: Based on the maximum conducted power of Wi-Fi and the antenna to use separation distance, Wi-Fi SAR was not required; [(9.38mW/5)* √2.412] = 2.914 < 3.0 Note: When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. The End

MRT Technology (Suzhou) Co., Ltd Report No.: 1509RSU00501 Phone: +86-512-66308358 Report Version: V01 Fax: +86-512-66308368 Issue Date: 09-23-2015 Web: www.mrt-cert.com FCC ID: X4YXPY12K Page Number: 1 of 60 FCC ID: X4YXPY12K APPLICANT: NEXXT SOLUTIONS Application Type: Certification Product: HD Wireless IP Camera Model No.: XPY1200 Brand Name: Nexxt Solutions FCC Classification: Digital Transmission System (DTS) FCC Rule Part(s): Part 15.247 Test Procedure(s): ANSI C63.10-2013, KDB 558074 D01v03r03 Test Date: September 09 ~ 23, 2015 MEASUREMENT REPORT FCC PART 15.247 WLAN 802.11b/g/n Reviewed By : ( Robin Wu ) Approved By : ( Marlin Chen ) The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in KDB 558074 D01v03r03. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. Report No.: 1509RSU00501 FCC ID: X4YXPY12K Page Number: 2 of 60 Revision History Report No. Version Description Issue Date 1509RSU00501 Rev. 01 Initial report 09-23-2015 Report No.: 1509RSU00501 FCC ID: X4YXPY12K Page Number: 3 of 60 CONTENTS Description Page 1. INTRODUCTION ..................................................................................................................... 6 1.1. Scope ........................................................................................................................... 6 1.2. MRT Test Location ....................................................................................................... 6 2. PRODUCT INFORMATION ..................................................................................................... 7 2.1. Equipment Description .................................................................................................. 7 2.2. Working Frequencies .................................................................................................... 7 2.3. Device Capabilities ....................................................................................................... 8 2.4. Test Configuration ........................................................................................................ 8 2.5. EMI Suppression Device(s)/Modifications ..................................................................... 8 2.6. Labeling Requirements ................................................................................................. 8 3. DESCRIPTION OF TEST ........................................................................................................ 9 3.1. Evaluation Procedure ................................................................................................... 9 3.2. AC Line Conducted Emissions ..................................................................................... 9 3.3. Radiated Emissions .................................................................................................... 10 4. ANTENNA REQUIREMENTS ................................................................................................. 11 5. TEST EQUIPMENT CALIBRATION DATE ............................................................................ 12 6. MEASUREMENT UNCERTAINTY ......................................................................................... 13 7. TEST RESULT ...................................................................................................................... 14 7.1. Summary .................................................................................................................... 14 7.2. 6dB Bandwidth Measurement ..................................................................................... 15 7.2.1. Test Limit ................................................................................................................ 15 7.2.2. Test Procedure used ............................................................................................... 15 7.2.3. Test Setting ............................................................................................................. 15 7.2.4. Test Setup ............................................................................................................... 15 7.2.5. Test Result .............................................................................................................. 16 7.3. Output Power Measurement ....................................................................................... 20 7.3.1. Test Limit ................................................................................................................ 20 7.3.2. Test Procedure Used .............................................................................................. 20 7.3.3. Test Setting ............................................................................................................. 20 7.3.4. Test Setup ............................................................................................................... 20 7.3.5. Test Result of Output Power ................................................................................... 21 7.4. Power Spectral Density Measurement ........................................................................ 22 7.4.1. Test Limit ................................................................................................................ 22 Report No.: 1509RSU00501 FCC ID: X4YXPY12K Page Number: 4 of 60 7.4.2. Test Procedure Used .............................................................................................. 22 7.4.3. Test Setting ............................................................................................................. 22 7.4.4. Test Setup ........................................................…

Text truncated - open the document above for the full version.

Test Setup Photo Description: Front View of the Conducted Emission Test Setup for 0.15kHz ~ 30MHz Description: Back View of the Conducted Emission Test Setup for 0.15kHz ~ 30MHz Description: Radiated Emission Test Setup for 9kHz ~ 30MHz Description: Radiated Emission Test Setup for 30MHz ~ 1GHz Description: Radiated Emission Test Setup for 1GHz ~ 18GHz Description: Radiated Emission Test Setup for 18GHz ~ 40GHz