X5B-064015RAG WIRELESS CONTROLLER FOR PS3

WARNING: This product uses LED’s that light up and can flash. A very small percentage of people (including children and teenagers) may be susceptible to blackouts or seizures when exposed to flashing lights or light patterns such as when playing video games (even people who have no history of such seizures or epilepsy). If you have experienced seizures or blackouts, or have a family history of such occurrences, you should consult a physician before using this product. If you experience any of the following symptoms, you should immediately stop using this product and seek immediate medical attention: dizziness, altered vision, eye or muscle twitches, jerking or shaking of arms or legs, confusion, loss of awareness, disorientation, or seizures. ENG Hereby, Performance Designed Products, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at www.pdp-eu.com/doc. FRA Performance Designed Products déclare par la présente que cet appareil est conforme aux prérequis essentiels et aux autres exigences établis par la Directive 1999/5/CE. La déclaration de conformité est disponible à l’adresse suivante : www.pdp-eu.com/doc. ESP Por la presente, Performance Designed Products, declara que este disposi - tivo está en conformidad con los requisitos esenciales y otras disposiciones relevantes de la Directiva 1999/5/CE. La declaración de conformidad se puede consultar en www.pdp-eu.com/doc. DEU Hiermit erklärt Performance Designed Products, dass dieses Gerät den wesentlichen Anforderungen und sonstigen relevanten Bestimmungen der Richtlinie 1999/5/EG entspricht. Diese Konformitätserklärung finden Sie unter www.pdp-eu.com/doc. ITA Performance Designed Products, dichiara che questo dispositivo è conforme ai requisiti fondamentali e alle altre disposizioni della Direttiva 1999/5/CE. La dichiarazione di conformità è consultabile sul sito www.pdp-eu.com/doc. POR A Performance Designed Products declara que este dispositivo cumpre os requisitos essenciais e outras disposições relevantes da Diretiva 1999/5/CE. A declaração de conformidade pode ser consultada em www.pdp-eu.com/doc. DAN Performance Designed Products erklærer hermed at denne enhed er i overensstemmelse med de væsentlige krav og andre relevante betingelser i henhold til direktiv 1999/5/EC. Overensstemmelseserklæringen kan ses på www.pdp-eu.com/doc. SWE Härmed försäkrar Performance Designed Products att denna enhet överens- stämmer med de grundläggande kraven och andra relevanta bestämmelser i direktiv 1999/5/EG. Försäkran om överensstämmelsen kan läsas på www.pdp-eu.com/doc. FIN Performance Designed Products ilmoittaa täten, että tämä oheislaite täyttää direktiivin 1999/5/EY perusvaatimukset ja muut asiaankuuluvat direktiivin säännökset. Vaatimusten mukaisuus -vakuutus on luettavissa osoitteessa www.pdp-eu.com/doc. NOR Med dette erklærer Performance Designed Products at denne enheten oppfyller viktige krav og andre forskrifter i direktivet 1999/5/EF. Overens - stemmelseerklæringen finnes på www.pdp-eu.com/doc. NLD Hierbij verklaart Performance Designed Products dat dit apparaat voldoet aan de essentiële eisen en relevante bepalingen van de Richtlijn 1999/5/EG. De conformiteitsverklaring kan worden geraadpleegd op at www.pdp-eu.com/doc. POL Performance Designed Products niniejszym oświadcza, że to urządzenie spełnia podstawowe wymagania i inne odpowiednie wymogi Dyrektywy 1999/5/EC. Tekst deklaracji zgodności znaleźć można na stronie interne - towej www.pdp-eu.com/doc. RUS Настоящим компания Performance Designed Products заявляет, что данное устройство соответствует специальным требованиям и прочим соответствующим положениям Директивы 1999/5/EC. Декларация о соответствии приведена на веб-странице www.pdp-eu.com/doc. ICE Performance Designed Products lýsir því hér með yfir að þetta tæki uppfylli grunnkröfur og önnur viðeigandi ákvæði tilskipunar 1999/5/EB. Skoða má samræmisyfirlýsinguna á www.pdp-eu.com/doc. JPN 本書によりPerformance Designed Productsはこのデバイスが1999/5/ EC指令の基本要件およびその他の関連条項を遵守していることを宣 言します。遵守の宣言に関する詳細は www.pdp-eu.com/doc を参照 してください。 Controller: 064-015T Dongle: 064-015R CONTROLLER MADE IN CHINA WWW.PDP.COM www.support.pdp.com FCC STATEMENTS: CAUTION: Changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate the equipment. The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC ID (Controller): X5B-064015T (Dongle): X5B-064015R This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause h…

Text truncated - open the document above for the full version.

Confidentiality Letter Date: 2015-12-24 Subject: Confidentiality Request for FCC ID: X5B-064015R and IC ID: 8814A-064015R Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Part List/Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent User’s Manual PERFORMANCE DESIGNED PRODUCTS, LLC has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 90 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04- 1705. Sincerely, By: ___ ___________________ Tom roberts (Signature/Title) (Print name)

External photo

WWYYCMA RR R

Internal photo

RF Exposure evaluation FCC ID：X5B-064015R According to 447498 D01 General RF Exposure Guidance v06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances≤ 5 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison eirp = pt x gt = (EXd) 2 /30 where: pt = transmitter output power in watts, gt = numeric gain of the transmitting antenna (unitless), E = electric field strength in V/m, --- 10 ((dBuV/m)/20) /10 6 d = measurement distance in meters (m)---3m So pt = (EXd) 2 /30 x gt Field strength =92.95dBuV/m @3m Ant gain =-0.61dBi;so Ant numeric gain=0.87 So pt={ [10 (92.95/20) /10 6 x3] 2 /30}x1000 mW =0.592mW So (0.592mW/5mm)x √2.480GHz =0.186<3 Then SAR evaluation is not required

Report No.: 15FAB08010 101 1 of 47 ATT Product Service Co., Ltd (CBTL Lab of UL/Demko) No. 3, ChangLianShan Industrial Park, ChangAn Town, DongGuan City, GuangDong, China. Phone: 86-769-8509 8000; Fax: 86-769-8509 8777 E-mail:[email protected] Rev. 1.0 FCC CERTIFICATION TEST REPORT For FCC ID: X5B-064015R IC: 8814A-064015R Report Reference No....................... : 15FAB08010 101 FCC 2.948 No.................................. : 923232 IC site number ................................. : 11033A Date of issue.................................... : 2015-09-21 Testing Laboratory........................... : ATT Product Service Co., Ltd. Address............................................ : No. 3, ChangLianShan Industrial Park, ChangAn Town, DongGuan City, GuangDong, China. Applicant’s name ............................. : PERFORMANCE DESIGNED PRODUCTS, LLC Address............................................ : 14144 Ventura Blvd, Suite 200 Sherman Oaks,CA 91423 U.S.A Manufacturer.................................... : PERFORMANCE DESIGNED PRODUCTS, LLC Test specification: Test item description........................ : AG WIRELESS CONTROLLER FOR PS3 Trade Mark....................................... : -- Model/Type reference .................... : 064-015R Ratings............................................. : 5Vdc by notebook supply; Tested by Approved by (Lake Hu/Engineer) (King Wang/EMC Manger) Report No.: 15FAB08010 101 2 of 47 ATT Product Service Co., Ltd (CBTL Lab of UL/Demko) No. 3, ChangLianShan Industrial Park, ChangAn Town, DongGuan City, GuangDong, China. Phone: 86-769-8509 8000; Fax: 86-769-8509 8777 E-mail:[email protected] Rev. 1.0 TABLE OF CONTENTS 1. Summary of test results...........................................................................................................................5 2. General test information...........................................................................................................................6 2.1.Description of EUT.................................................................................................................................6 2.2.Accessories of EUT...............................................................................................................................6 2.3.Assistant equipment used for test........................................................................................................6 2.4.Block diagram of EUT configuration for test.......................................................................................7 2.5.Test environment conditions.................................................................................................................7 2.6.Measurement uncertainty.....................................................................................................................8 3. 20dB & 99% Bandwidth...........................................................................................................................9 3.1.Test equipment.......................................................................................................................................9 3.2.Block diagram of test setup..................................................................................................................9 3.3.Limits........................................................................................................................................................9 3.4.Test Procedure.......................................................................................................................................9 3.5.Test Result............................................................................................................................................10 3.6.Original test data..................................................................................................................................10 4. CARRIER FREQUENCY SEPARATION TEST.................................................................................12 4.1.Test equipment.....................................................................................................................................12 4.2.The Requirement For Section 15.247(a)(1).....................................................................................12 4.3.EUT Configuration on Measurement.................................................................................................12 4.4.Operating Condition of EUT...............................................................................................................12 4.5.Test Procedure.....................................................................................................................................13 4.6.Test Result............................................................................................................................................13 5. NUMBER OF HOPPING FREQUENCY TEST..................................................................................16 5.1.Test equipment.....................................................................................................................................16 5.2.The Requirement For Section 15.247(a)(1)(iii)................................................................................16 5.3.EUT Configuration on Measurement.................................................................................................16 5.4.Operating Condition of EUT...............................................................................................................16 5.5.Test Procedure.....................................................................................................................................16 5.6.Test Result............................................................................................................................................17 6. DWELL TIME TEST.....................................................…

Text truncated - open the document above for the full version.

Setup photo