X5B-BB7684GameStop Wii Remote

REMOTE & PLAYCHUK™ USER MANUAL Congratulations on your purchase of the GameStop Remote & Playchuk™ for Wii™. The contents of this package include: 1 – Remote for Wii™ 1 – Playchuk for Wii™ 1 – User Manual 1 – Wii Wheel Before using this product, please attach the wrist strap to the end of the Remote. Battery Instructions: • Open the battery compartment located on the back of the Remote • Insert the 2 AA batteries, ensuring correct polarity (see figure 2) • Close the Remote battery compartment (see figure 3) Synchronization: • Press the “POWER” button on the top left hand side of the Remote to switch it on • Synchronize the Remote with the Wii™ console o Press the “SYNC” button located on the Wii™ console (see figure 4) o Press the “SYNC” button located on the Remote (see figure 5) Standby Mode: The Remote will automatically enter standby mode when not in use for a period of time. To exit standby mode, press any button on the Remote. Playchuk™ Instructions: When game play requires the Playchuk™, please connect the Playchuk™ to the Remote using the appropriate connection slot. (see figures 6 & 7) Troubleshooting Tips: Remote not working: • Change the batteries in the Remote • Remote may be in standby mode (refer to Standby Mode Instructions) • Ensure the Remote is properly synchronized with the Wii™ console • Refer to the Wii™ console Instruction Manual for more troubleshooting tips Playchuk™ not working: • Ensure the Playchuk™ is properly connected to the Remote (refer to Playchuk™ Instructions) • Refer to the Wii™ console Instruction Manual for more troubleshooting tips WARNING: We recommend taking fifteen-minute breaks for every hour played. If, at any time, you feel joint pain in your hands, wrists, elbows or elsewhere, stop playing until the symptoms disappear and see your doctor. USE THE WRIST STRAP. Game play can involve rapid or vigorous motion. Please use the wrist strap to prevent losing your grip on the controller and causing damage to the Remote or surrounding objects, or injury to other people. WEAR THE WRIST STRAP WHEN ONE IS PROVIDED. • Make sure all players use the wrist strap and that the strap is secure. • When sharing a Remote between multiple players, make sure each person uses the wrist strap properly. • Wearing the wrist strap will prevent you from accidentally dropping or throwing the Remote during game play, which could damage the Remote or surrounding objects, or cause injury to other people. DO NOT LET GO OF THE CONTROLLER DURING GAME PLAY. • Read the Instruction booklet for the game you are playing and follow all game control instructions for correct use of the Remote or accessory controllers. • Hold the Remote securely and avoid excessive motion, as it may cause you to let go of the Remote and may break the wrist strap. • If your hands become moist, stop and dry your hands. ALLOW ADEQUATE ROOM AROUND YOU DURING GAME PLAY. 1. Stay at least three (3) feet away from the television. 2. As you may move around during game play, make sure objects and other people are out of your range of movement or arm motion to prevent damage or injury. Important Safeguards & Precautions: • This unit is for indoor use only • Do not expose to dust, direct sunlight, wet weather conditions, high humidity, high temperature • Do not expose the unit to splashing, dripping rain or moisture • Do not immerse in liquid • Do not disassemble • Do not use if the equipment is damaged • Never carry the unit by the cable • For external cleaning, use a soft, clean, cloth only NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. MODIFICATIONS WILL VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC ID: X5B-BB7684 MADE IN CHINA This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ©2010 Performance Designed Products. All Rights Reserved. All other trademarks, brands and names are the property of their respective owners. TÉLÉCOMMANDE ET MANUEL DE L’UTILISATEUR PLAYCHUK MC Toutes nos félicitations pour avoir acheté la télécommande GameStop et Playchuk MC pour Wii MC . Cet emballage comprend : 1 – Télécommande pour Wii MC 1 – Playchuk pour Wii MC 1 – Manuel de l’utilisateur 1 – Wii Wheel Avant d’utiliser ce produit, veuillez fixer la dragonne à l’extrémité de la télécommande. Insertion des piles : • Ouvrir le compartiment des piles situé à l’arrière de la télécommande. • Insérer 2 piles AA en veillant à ce que la polarité soit conforme (figure 2). • Fermer le compartiment des piles de la télécommande (figure 3). Synchronisation : • Appuyer sur le bouton « POWER » dans le coin supérieur gauche de la télécommande pour la mettre en marche. • Synchroniser la télécommande avec la console Wii MC . o Appuyer sur le bouton « SYNC » situé sur la console (figure 4). o Appuyer sur le bouton « SYNC » si…

Text truncated - open the document above for the full version.

RF_160, Issue 02 Declaration of Authorization We Name: Performance Designed Products, LLC Address: 14144 Ventura Blvd, Suite 200 Sherman. City: Oaks, California Country: United States Declare that: Name Representative of agent: Ms. Cathy Wang Agent Company name: Neutron Engineering, Inc. Address: No.3 Jinshagang 1 st Road, Shixia, Dalang Town City: Dongguan Country: China is authorized to apply for Certification of the following product(s): Product description: GameStop Wii Remote Type designation: BB-7684; Trademark: GameStop; on our behalf. Date: 2010-9-17 City: Oaks, California Nam e: Tom Roberts Function: Chief Technical Officer Signature: ................... Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

90-guA-01 :etaD erusolcsid-non rof tseuqeR ,CCF RF_501, Issue 5 Page 1 of 1 Company Name: Performance Designed Products, LLC Address :14 144 Ventu ra Blvd, Suite 200 Sher man. Ci ty: Oaks, Californi a Country: United States To: Telefication B.V.,Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject:Request for confidentiality FCC ID: X5B-BB7684 Reference number: ###### Dear FCC TCB, 1. Long-Term Confid entiali ty Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests no n-disclosure and confidenti al treatment of th e following materials submitted in su pport of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Pr ocedure Above materials contain secrets, proprietary an d technical information, which would cust omaril y be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm an d provide unjustifie d bene fits for competitors. 2. Short-Term Confidentiality (STC) Pur suant to Public Not ic e DA 04-1705 of the Commission’s policy, in or der t o comply wit h t he market ing regulations in 47 CFR §2.803 and the im portation rules in 47 CFR §2.1204, a pplicanthereby requests Short-Term Confidential treatment of th e following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Planned Release Date STC: (notes 2, 3, 4, 5) Date:2010 -09-1 7 Name and si gnature of ap plicant: Tom Robert s Notes : 1) A do cument or ty pe of do cument can only ha ve ONE ty pe of confidentiality! 2) S hort-Term confidentiality is in principle for 45 days from date of grant; i t can be exten de d max 3 times (total time 180 days max.)! 3) FCC must be inf ormed when mar keti ng begins e arl ier. 4) Release ta kes place automatically thus extension must be reques ted i n time. Tel efic atio n does not remind you o f this! 5) Request for e xtension or for re lease must be re ceived by Telefi cat ion at least 7 days b efore date of actual marketi ng o r be fore expiration of the STC peri od

Neutron Engineering Inc. Project No.: 1009C006 Page 2 of 9 1009C006 1009C006 Neutron Engineering Inc. Project No.: 1009C006 Page 2 of 9 1009C006 1009C006 Neutron Engineering Inc. Project No.: 1009C006 Page 3 of 9 1009C006 1009C006 Neutron Engineering Inc. Project No.: 1009C006 Page 3 of 9 1009C006 1009C006

Neutron Engineering Inc. Project No.: 1009C006 Page 4 of 9 1009C006 1009C006 Neutron Engineering Inc. Project No.: 1009C006 Page 4 of 9 1009C006 1009C006 Neutron Engineering Inc. Project No.: 1009C006 Page 5 of 9 1009C006 Neutron Engineering Inc. Project No.: 1009C006 Page 6 of 9 1009C006 1009C006 Neutron Engineering Inc. Project No.: 1009C006 Page 6 of 9 1009C006 1009C006 Neutron Engineering Inc. Project No.: 1009C006 Page 7 of 9 1009C006 1009C006 Neutron Engineering Inc. Project No.: 1009C006 Page 7 of 9 1009C006 1009C006 Neutron Engineering Inc. Project No.: 1009C006 Page 8 of 9 1009C006 1009C006 Neutron Engineering Inc. Project No.: 1009C006 Page 8 of 9 1009C006 1009C006 Neutron Engineering Inc. Project No.: 1009C006 Page 9 of 9 1009C006

Neutron Engineering Inc. FCC RF EXPOSURE REPORT FCC ID: X5B-BB7684 Project No. : Sep. 10, 2010 Equipment : 1009C006 Model : GameStop Wii Remote Applicant : BB-7684 Address : Performance Designed Products, LLC Oaks, CA 91423 According: : FCC Guidelines for Human Exposure IEEE C95.1 Neutron Engineering Inc. No.3, Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. GENERAL CONCULUSION: No evaluation required if power is below this threshold: F(GHz) P(mW) Low 2.412 High 2.462 24.620 Maximum measured transmitter power: Out Power (dBm) Out Power (mW) Conducted Power 0.43 0.0011 EIRP Power 1.83 0.0015 Note: Table for Filed Antenna (2T3R) Ant . Brand Model Name Antenna Type Connector Gain (dBi) NOTE - - PIFA N/A 1.4 BT Antenna Threshold for no SAR evaluation is 24.620mW. Transmitter power is 0.0015 mW. Conclusion: No SAR evaluation required since transmitter power is below FCC threshold

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C006 Page 2 of 65 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences or generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C006 Page 3 of 65 Table of Contents Page 1 . CERTIFICATION 6 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 3 . GENERAL INFORMATION 9 3.1 GENERAL DESCRIPTION OF EUT 9 3.2 DESCRIPTION OF TEST MODES 11 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 11 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 3.5 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 14 4.1.3 TEST PROCEDURE 15 4.1.4 DEVIATION FROM TEST STANDARD 15 4.1.5 TEST SETUP 15 4.1.6 EUT OPERATING CONDITIONS 16 4.1.7 TEST RESULTS 17 4.2 RADIATED EMISSION MEASUREMENT 18 4.2.1 RADIATED EMISSION LIMITS 18 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 19 4.2.3 TEST PROCEDURE 20 4.2.4 DEVIATION FROM TEST STANDARD 20 4.2.5 TEST SETUP 21 4.2.6 EUT OPERATING CONDITIONS 21 4.2.7 TEST RESULTS (BETWEEN30 – 1000 MHZ) 22 4.2.8 TEST RESULTS (ABOVE 1000 MHZ) 24 5 . NUMBER OF HOPPING CHANNEL 36 5.1 APPLIED PROCEDURES / LIMIT 36 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 36 5.1.2 TEST PROCEDURE 36 5.1.3 DEVIATION FROM STANDARD 36 5.1.4 TEST SETUP 36 5.1.5 EUT OPERATION CONDITIONS 36 5.1.6 TEST RESULTS 37 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C006 Page 4 of 65 Table of Contents Page 6 . AVERAGE TIME OF OCCUPANCY 38 6.1 APPLIED PROCEDURES / LIMIT 38 6.1.1 MEASUREMENT INSTRUMENTS LIST 38 6.1.2 TEST PROCEDURE 38 6.1.3 DEVIATION FROM STANDARD 38 6.1.4 TEST SETUP 39 6.1.5 EUT OPERATION CONDITIONS 39 6.1.6 TEST RESULTS 40 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 46 7.1 APPLIED PROCEDURES / LIMIT 46 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 46 7.1.2 TEST PROCEDURE 46 7.1.3 DEVIATION FROM STANDARD 46 7.1.4 TEST SETUP 46 7.1.5 EUT OPERATION CONDITIONS 46 7.1.6 TEST RESULTS 47 8 . BANDWIDTH TEST 49 8.1 APPLIED PROCEDURES / LIMIT 49 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 49 8.1.2 TEST PROCEDURE 49 8.1.3 DEVIATION FROM STANDARD 49 8.1.4 TEST SETUP 49 8.1.5 EUT OPERATION CONDITIONS 49 8.1.6 TEST RESULTS 50 9 . PEAK OUTPUT POWER TEST 52 9.1 APPLIED PROCEDURES / LIMIT 52 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 52 9.1.2 TEST PROCEDURE 52 9.1.3 DEVIATION FROM STANDARD 52 9.1.4 TEST SETUP 52 9.1.5 EUT OPERATION CONDITIONS 52 9.1.6 TEST RESULTS 53 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 55 10.1 APPLIED PROCEDURES / LIMIT 55 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 55 10.1.2 TEST PROCEDURE 55 10.1.3 DEVIATION FROM STANDARD 55 10.1.4 TEST SETUP 56 10.1.5 EUT OPERATION CONDITIONS 56 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C006 Page 5 of 65 Table of Contents Page 10.1.6 TEST RESULTS 57 11 . RF EXPOSURE TEST 62 11.1 APPLIED PROCEDURES / LIMIT 62 11.1.1 MEASUREMENT INSTRUMENTS LIST 62 11.1.2 MPE CALCULATION METHOD 63 11.1.3 DEVIATION FROM STANDARD 63 11.1.4 TEST SETUP 63 11.1.5 EUT OPERATION CONDITIONS 63 11.1.6 TEST RESULTS 64 12 . EUT TEST PHOTO 65 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C006 Page 6 of 65 1. CERTIFICATION Equipment : GameStop Wii Remote Brand Name : GameStop Model Name : BB-7684 Applicant : Performance Designed Products,LLC Date of Test: Sep. 01, 2010 ~ Sep. 10, 2010 Test Item : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2003 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FCCP-1-1009C006) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C006 Page 7 of 65 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission N/A 15.247(d) Antenna conducted Spurious Emission PASS 15.247 (a)(1) Hopping Channel Separation PASS 15.247 (b)(1) Peak Output Power PASS 15.247(d)/15.209 Radiated Spurious Emission PASS 15.247 (a)(1)(iii) Number of Hopping Frequency PASS 15.247 (a)(1)(iii) Dwell Time PASS 15.205 Restricted Bands PASS 15.203 Antenna Requirement PASS 1.1307 1.…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C006 Page 65 of 65 12. EUT TEST PHOTO Radiated Measurement Photos Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C006 Page 65 of 65 12. EUT TEST PHOTO Radiated Measurement Photos