X5B-PL-051-004TAfterglow PS4 Wireless Dongle

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Cl ass B digital device, pursuant to part 15 of the FCC Rules. These limits ar e desi gned to provide reas onable protection against harmfu l interf erence in a resi dential instal lation. This equipment generates, use s and can radiate radio fr equency energy and, if not instal led and use d in ac cordance with the instru ctions, may cause harmfu l interference to radio communications. However, there is no guar antee that interference will not occur in a particular instal lation. If this equipment does cause har mfu l interference to radio or televisi on reception, which can be determined by turn ing the equipment off and on, the use r is encouraged to try to corr ect the interf erence by one or more of the following measures: -Reori ent or relocate the receiving antenna. -Increase the separ ation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the deal er or an experi enced radio/ TV technician fo r help.

RF_160, Issue 02 Performance Designed Products, LLC Declaration of Authorization We Name: Performance Designed Products, LLC....................................... Address: 14144 Ventura Blvd., Suite 200 Sherman Oaks, CA 91423 USA. ...... City: Oaks .......................................................................... Country: United States ...................................................................... Declare that: Name Representative of agent: Gene Chang (1) Agent Company name: QuieTek Corp. Address: Fl.2, No.345, Xin-hu 2 nd Rd., Nei-hu District City: Taipei Country Taiwan is authorized to apply for Certification of the following product(s): Product description: Afterglow PS4 Wireless Dongle FCC ID: PL-051-004T Trademark: pdp on our behalf. Date: ......2014/07/21........ City: ...... Oaks .............. Name: ...... Tom Roberts ........ (2) Function: ...... Chief Technical Officer ......... Signature: .............................. Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

Performance Designed Products, LLC FCC ID.: X5B-PL-051-004T 14144 Ventura Blvd., Suite 200 Sherman Oaks, CA 91423 USA Tel : 1-323-234-9911 Performance Designed Products, LLC 14144 Ventura Blvd., Suite 200 Sherman Oaks, CA 91423 USA Tel : 1-323-234-9911 Fax: 1-323-234-9922 Federal Communications Commission July 21 , 2014 Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: Schematics: (PL-051-004T) Schem Block Diagram: (PL-051-004T) BlkDia Operational Description: (PL-051-004T) OPDes The above materials contain trade secrets and proprietary information not customarily Released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ---------------------------------------------------------- Tom Roberts / Chief Technical Officer Performance Designed Products, LLC

Performance Designed Products, LLC 14144 Ventura Blvd., Suite 200 Sherman Oaks, CA 91423 USA Tel : 1-323-234-9911 Fax: 1-323-234-9922 Attestation for FCC Declaration of Conformity FCC ID: X5B-PL-051-004T Data: July 21, 2014 Please be notified that we, the undersigned, Performance Designed Products, LLC.declares that the product which bears the above FCC ID is also compliant with the FCC requirements for DoC. The test report number supporting the DoC is 1460577R-ITUSP01V00 Testing in regards to this report was done by QuieTek Corporation, located at 2F, No.345, Xinhu 2nd Rd., Neihu District,, Taipei Taiwan, which has been accredited in accordance to all of the requirements of 47CFR 2.948 (d) and (e) of the FCC rules and KDB349827. Sincerely, ------------------------------------------------------------ Tom Roberts / Chief Technical Officer Performance Designed Products, LLC Tel : 1-323-234-9911 Fax: 1-323-234-9922 Email: [email protected]

Performance Designed Products, LLC FCC ID.: X5B-PL-051-004T 14144 Ventura Blvd., Suite 200 Sherman Oaks, CA 91423 USA Tel : 1-323-234-9911 Federal Communications Commission July 21 , 2014 Authorization and Evaluation Division ATTESTATION FCC ID: X5B-PL-051-004T Product: Afterglow PS4 Wireless Dongle Model: PL-051-004T We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely, ------------------------------------------------ Tom Roberts / Chief Technical Officer Performance Designed Products, LLC

Report No.: 1460579R-RFUSP25V00 Page : 1 of 5 Attachment 2 : EUT Detailed Photographs (1) EUT Photo (2) EUT Photo Report No.: 1460579R-RFUSP25V00 Page : 2 of 5 (3) EUT Photo (4) EUT Photo

Performance Designed Products, LLC FCC ID.: X5B-PL-051-004T 14144 Ventura Blvd., Suite 200 Sherman Oaks, CA 91423 USA Tel : 1-323-234-9911 The FCC ID Label will be placed on the equipment as shown in the photograph below.

Report No.: 1460579R-RFUSP25V00 Page : 3 of 5 (5) EUT Photo (6) EUT Photo Report No.: 1460579R-RFUSP25V00 Page : 4 of 5 (7) EUT Photo (8) EUT Photo Report No.: 1460579R-RFUSP25V00 Page : 5 of 5 (9) EUT Photo

RF Exposure Statement 1. Standard Applicable According to 1.1307 (b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. 2. Measurement Result: According to KDB 447498 D01 Mobile Portable RF Exposure v05, Operation frequency = 2450MHz and antenna separation distance = 5mm, SAR Test Exclusion Threshold = 10mW The Device max peak output power = 1.91dBm, Equivalent to 1.55mW and less than 10mW The SAR/MPE measurement is not necessary.

Report No.: 1460579R-RFUSP25V00 Page : 1 of 44 FCC Test Report Product Name Afterglow PS4 Wireless Dongle Model No PL-051-004T FCC ID. X5B-PL-051-004T Applicant Performance Designed Products, LLC Address 14144 Ventura Blvd., Suite 200 Sherman Oaks, CA91423 USA Date of Receipt June 24, 2014 Issue Date July 21, 2014 Report No. 1460579R-RFUSP25V00 Report Version V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of QuieTek Corporation. Report No.: 1460579R-RFUSP25V00 Page : 2 of 44 Test Report Issue Date: July 21, 2014 Report No.: 1460579R-RFUSP25V00 Product Name Afterglow PS4 Wireless Dongle Applicant Performance Designed Products, LLC Address 14144 Ventura Blvd., Suite 200 Sherman Oaks, CA91423 USA Manufacturer Performance Designed Products, LLC Model No. PL-051-004T EUT Rated Voltage DC 5V (Power by USB) EUT Test Voltage AC 120V/60Hz Trade Name pdp Applicable Standard FCC CFR Title 47 Part 15 Subpart C: 2014 ANSI C63.10: 2009, KDB 558074 Test Result Complied Documented By : ( Senior Adm. Specialist / Rita Huang ) Tested By : ( Engineer / Benjamin Pan ) Approved By : ( Director / Vincent Lin ) Report No.: 1460579R-RFUSP25V00 Page : 3 of 44 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION .....................................................................................................5 1.1. EUT Description............................................................................................................................5 1.2. Operational Description ................................................................................................................7 1.3. Tested System Details....................................................................................................................8 1.4. Configuration of Tested System ....................................................................................................8 1.5. EUT Exercise Software .................................................................................................................8 1.6. Test Facility ...................................................................................................................................9 2. Conducted Emission..................................................................................................................10 2.1. Test Equipment............................................................................................................................10 2.2. Test Setup ....................................................................................................................................10 2.3. Limits ..........................................................................................................................................11 2.4. Test Procedure .............................................................................................................................11 2.5. Uncertainty ..................................................................................................................................11 2.6. Test Result of Conducted Emission.............................................................................................12 3. Peak Power Output ...................................................................................................................14 3.1. Test Equipment............................................................................................................................14 3.2. Test Setup ....................................................................................................................................14 3.3. Limit ............................................................................................................................................14 3.4. Test Procedure .............................................................................................................................14 3.5. Test Result of Peak Power Output...............................................................................................15 4. Radiated Emission .....................................................................................................................16 4.1. Test Equipment............................................................................................................................16 4.2. Test Setup ....................................................................................................................................17 4.3. Limits ..........................................................................................................................................18 4.4. Test Procedure .............................................................................................................................18 4.5. Uncertainty ..................................................................................................................................18 4.6. Test Result of Radiated Emission................................................................................................19 5. RF antenna conducted test........................................................................................................23 5.1. Test Equipment............................................................................................................................23 5.2. Test Setup ....................................................................................................................................23 5.3. Limits ....................................................................................................…

Text truncated - open the document above for the full version.

Report No.: 1460579R-RFUSP25V00 Page : 1 of 3 Attachment 1: EUT Test Setup Photographs Front View of Conducted Test Back View of Conducted Test Report No.: 1460579R-RFUSP25V00 Page : 2 of 3 Front View of Radiated Test Back View of Radiated Test Report No.: 1460579R-RFUSP25V00 Page : 3 of 3 Front View of Radiated Test (Horn) Back View of Radiated Test (Horn)