X5B-PL6453PS3 AG2 BT Headset

1 PL-6453 Bluetooth Headset User Manual Thank you for purchasing the Bluetooth Headset PL-6453, we hope you will enjoy all its benefits. Please read this user's guide to get start, and to make the best usage of the headset's many features. CAUTION: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. Such modifications could void the user authority to operate equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: üReorient or relocate the receiving antenna. üIncrease the separation between the equipment and receiver. üConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. üConsult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the Party, responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices. FCC ID : X5B-PL6453 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC: 8814A-PL6453 This device complies with industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.  Le prlsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio 2 exempts de licence. L'exploitation est autorisle aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radio l lectrique subi, mmme si le brouillage est susceptible d'en compromettre le fonctionnement. Driving safety 1. Keeping your eyes on the road, driving is your foremost responsibility. 2. Obey traffic laws at all times: Make sure that using a Bluetooth wireless headset while driving is permitted by your local law. BEFORE USING YOUR HEADSET Checking phone compatibility Ensure that your phone has Bluetooth capability by visiting your phone manufacturer's website. Your headset overview K1 Button: Turn on/ Turn off/ Pairing/ Answer/ End/ Voice Dial/ Reject/ Transferring a call/ Redial K2 Button: Increase Volume K3 Button: Decrease Volume Checking the accessories Make sure that you have the following items with your headset: USB Charging cable, Manual, Ear-hook. Charging the headset Your headset uses a rechargeable battery. You must charge the battery fully before using the headset for the first time. 1. Plug the USB Charging cable into an USB socket of PC. 2. Connect the USB Charging cable with headset as it shown on the picture. The red indicator of headset will turn on when charging. 3. When the battery is fully charged, the red indicator will change to blue. 1) When the headset is in low battery, the headset will flash red instead of blue. 2) The headset will be fully charged in approximately 1-2 hours. 3) Remove the USB Charging cable from the USB socket. WARNING: Do not attempt to charge the headset with anything other than the USB Charging Cable provided. Using unauthorized USB Charging Cable may damage the headset. IMPORTANT: The headset cannot be used while charging. BASIC OPERATIONS 3 Turning the headset on/off 1. To turn the headset on Press and hold K1 Button for about 3 seconds, the blue indicator of the headset will flash 3 times rapidly. The headset is now turned on. 2. To turn the headset off Press and hold K1 Button for about 3 seconds, the red indicator of the headset will flash red 5 times rapidly. The headset will be turned off. 3. When the blue indicator flashes red during standby mode, it means the headset is on low battery, please charge the headset. Pairing Before using your headset for the first time, you must pair it with your Bluetooth enabled phone. 1. Ensure that the headset is off (see “To turn the headset off” section).And the mobile phone Bluetooth setting is activated. 2. Press and hold the K1 Button for about 4 seconds until the indicator light alternately flashes blue and red ˈyou headset is under pairing mode. Your PL-6453 Bluetooth headset adopts Proximity Pairing Technology to simplify the Bluetooth setup process. For more details, please kindly check (Xa) item. 3(a) Once your headset is under pairing mode, it will search the nearest Bluetooth devices, like your Bluetooth mobile phone automatically. 4(a) Your Bluetooth mobile phone will indicate “PL-6453” headset and ask if you want to pair with it. Confirm this by pressing the “Yes” or “OK” key. 5(a) Enter a passkey or PIN code “0000” (4 zeros), then press the “Yes” or “OK” key. Once the blue indicator flashes twice instead of blue and read indicator flashing, your headset has been connected with your Bluetooth mobile phone. Note: If the Bluetooth version of your Bluetooth mobile phone is V2.1, you will not need to enter a Passkey (Pin code) during above pairi…

Text truncated - open the document above for the full version.

DATE Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID:___X5B-PL6453_________ Product Name:___ RockCandy PS3 BT Headset ________ Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 2013- 10-10 Day of 20 By: Tom roberts Signature Printed Title: Chief Technical Officer On behalf of : Performance Designed Products LLC Telephone: 13232349911 :PS3 AG2 BT Headset Schematics Block diagram Operation description

1 of 1 ATT Product Service Co., Ltd. (CBTL Lab of UL/Demko) No. 3, ChangLianShan Industrial Park, ChangAn Town, DongGuan City, GuangDong, China. Phone: 86-769-8509 8000; Fax: 86-769-8509 8777 E-mail:[email protected] External photos

Model: PL- 6453 PS3 AG2 BT Headset FCC ID:X5B-PL6453 www.pdp.com Made in China IC:8814A-PL6453

1 of 1 ATT Product Service Co., Ltd. (CBTL Lab of UL/Demko) No. 3, ChangLianShan Industrial Park, ChangAn Town, DongGuan City, GuangDong, China. Phone: 86-769-8509 8000; Fax: 86-769-8509 8777 E-mail:[email protected] Label Location Label Location

1 of 3 ATT Product Service Co., Ltd. (CBTL Lab of UL/Demko) No. 3, ChangLianShan Industrial Park, ChangAn Town, DongGuan City, GuangDong, China. Phone: 86-769-8509 8000; Fax: 86-769-8509 8777 E-mail:[email protected] Internal Photos 2 of 3 ATT Product Service Co., Ltd. (CBTL Lab of UL/Demko) No. 3, ChangLianShan Industrial Park, ChangAn Town, DongGuan City, GuangDong, China. Phone: 86-769-8509 8000; Fax: 86-769-8509 8777 E-mail:[email protected] 3 of 3 ATT Product Service Co., Ltd. (CBTL Lab of UL/Demko) No. 3, ChangLianShan Industrial Park, ChangAn Town, DongGuan City, GuangDong, China. Phone: 86-769-8509 8000; Fax: 86-769-8509 8777 E-mail:[email protected]

RF Exposure evaluation letter According to 447498 1 D01 General RF Exposure Guidance v05 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,16 where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison So 1.4/5·[√2.402(GHz)]=0.43< 3.0 for 1-g SAR So SAR evaluation is not required.

N O . L 3 0 9 8 NO.L3098 Report No.: 13EAB08092 41 1 of 62 ATT Product Service Co., Ltd. (CBTL Lab of UL/Demko) No. 3, ChangLianShan Industrial Park, ChangAn Town, DongGuan City, GuangDong, China. Phone: 86-769-8509 8000; Fax: 86-769-8509 8777 E-mail:[email protected] FCC CERTIFICATION TEST REPORT FOR FCC ID: X5B-PL6453 Report Reference No. ...................... : 13EAB08092 41 Date of issue ..................................... : 2013-09-20 Testing Laboratory............................ : ATT Product Service Co., Ltd. Address ............................................ : No. 3, ChangLianShan Industrial Park, ChangAn Town, DongGuan City, GuangDong, China. Applicant’s name .............................. : Performance Designed Products,LLC Address ............................................ : 14144 Ventura Blvd,Suite 200,Sherman Oaks,CA 91423 U.S.A Manufacturer .................................... : Performance Designed Products,LLC Test specification: FCC PART 15.247 Test item description ........................ : PS3 AG2 BT Headset Trade Mark ....................................... : Rock Candy Model/Type reference ..................... : PL-6453 Ratings ............................................. : DC 3.7V Responsible Engineer Approved by （Mike Yang/ Engineer） （Tomy Wu /EMC Manager） N O . L 3 0 9 8 NO.L3098 Report No.: 13EAB08092 41 2 of 62 ATT Product Service Co., Ltd. (CBTL Lab of UL/Demko) No. 3, ChangLianShan Industrial Park, ChangAn Town, DongGuan City, GuangDong, China. Phone: 86-769-8509 8000; Fax: 86-769-8509 8777 E-mail:[email protected] TABLE OF CONTENTS TEST REPORT DECLARE ......................................................................................................................... 4 1.Summary of test results............................................................................................................................ 5 2.General test information ........................................................................................................................... 6 2.1 ACCRESITATIONS ............................................................................................................................... 6 2.2Description of EUT .................................................................................................................................. 6 2.3Accessories of EUT ................................................................................................................................ 6 2.4Assistant equipment used for test ........................................................................................................ 6 2.5Block diagram of EUT configuration for test ....................................................................................... 6 2.6Test environment conditions ................................................................................................................. 7 2.7Measurement uncertainty ...................................................................................................................... 7 3.Maximum Peak Output Power................................................................................................................. 8 3.1Test equipment ........................................................................................................................................ 8 3.2Block diagram of test setup ................................................................................................................... 8 3.3Limits ......................................................................................................................................................... 8 3.4Test Procedure ........................................................................................................................................ 8 3.5Test Result ............................................................................................................................................... 9 4.20dB Bandwidth ...................................................................................................................................... 12 4.1Test equipment ...................................................................................................................................... 12 4.2Block diagram of test setup ................................................................................................................. 12 4.3Limits ....................................................................................................................................................... 12 4.4Test Procedure ...................................................................................................................................... 13 4.5Test Result ............................................................................................................................................. 14 4.6Original test data ................................................................................................................................... 14 5.Carrier Frequency Separation ............................................................................................................... 18 5.1Test equipment ...................................................................................................................................... 18 5.2Block diagram of test setup ................................................................................................................. 18 5.3Limits ....................................................................................................................................................... 18 5.4Test Procedure ...................................................................................................................................... 18 5.5Test Result ..................................................................................................................…

Text truncated - open the document above for the full version.

1 of 1 ATT Product Service Co., Ltd. (CBTL Lab of UL/Demko) No. 3, ChangLianShan Industrial Park, ChangAn Town, DongGuan City, GuangDong, China. Phone: 86-769-8509 8000; Fax: 86-769-8509 8777 E-mail:[email protected] Test setup photograph