X5B-PL7602AAfterglow Remote for Wii

WII REMOTE USER MANUAL Congratulations on your purchase of the WII Remote for Wii™. The contents of this package include: 1 – Remote for Wii™ 1 – User Manual Before using this product, please attach the wrist strap to the end of the Remote. Battery Instructions: • Open the battery compartment located on the back of the Remote • Insert the 2 AA batteries, ensuring correct polarity (see figure 2) • Close the Remote battery compartment (see figure 3) Synchronization: • Press the “POWER” button on the top left hand side of the Remote to switch it on • Synchronize the Remote with the Wii™ console o Press the “SYNC” button located on the Wii™ console (see figure 4) o Press the “SYNC” button located on the Remote (see figure 5) Standby Mode: The Remote will automatically enter standby mode when not in use for a period of time. To exit standby mode, press any button on the Remote. Troubleshooting Tips: Remote not working: • Change the batteries in the Remote • Remote may be in standby mode (refer to Standby Mode Instructions) • Ensure the Remote is properly synchronized with the Wii™ console • Refer to the Wii™ console Instruction Manual for more troubleshooting tips WARNING: We recommend taking fifteen-minute breaks for every hour played. If, at any time, you feel joint pain in your hands, wrists, elbows or elsewhere, stop playing until the symptoms disappear and see your doctor. USE THE WRIST STRAP. Game play can involve rapid or vigorous motion. Please use the wrist strap to prevent losing your grip on the controller and causing damage to the Remote or surrounding objects, or injury to other people. WEAR THE WRIST STRAP WHEN ONE IS PROVIDED. • Make sure all players use the wrist strap and that the strap is secure. • When sharing a Remote between multiple players, make sure each person uses the wrist strap properly. • Wearing the wrist strap will prevent you from accidentally dropping or throwing the Remote during game play, which could damage the Remote or surrounding objects, or cause injury to other people. DO NOT LET GO OF THE CONTROLLER DURING GAME PLAY. • Read the Instruction booklet for the game you are playing and follow all game control instructions for correct use of the Remote or accessory controllers. • Hold the Remote securely and avoid excessive motion, as it may cause you to let go of the Remote and may break the wrist strap. • If your hands become moist, stop and dry your hands. ALLOW ADEQUATE ROOM AROUND YOU DURING GAME PLAY. 1. Stay at least three (3) feet away from the television. 2. As you may move around during game play, make sure objects and other people are out of your range of movement or arm motion to prevent damage or injury. Important Safeguards & Precautions: • This unit is for indoor use only • Do not expose to dust, direct sunlight, wet weather conditions, high humidity, high temperature • Do not expose the unit to splashing, dripping rain or moisture • Do not immerse in liquid • Do not disassemble • Do not use if the equipment is damaged • Never carry the unit by the cable • For external cleaning, use a soft, clean, cloth only NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. MODIFICATIONS WILL VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT. CAUTION: Changes or modifications to this equipment not expressly approved by the manufacturer could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC ID: X5B-PL7602A This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC: 8814A-PL7602A This device complies with Industry Canada RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio RSS-210. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. ©2010 Performance Designed Products. All Rights Reserved. All other trademarks, brands and names are the property of their respective owners

Performance Designed Products, LLC Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with Sections 0.457 and 0.459 pertaining to confidential material. Performance Designed Products, LLC would like the following documents regarding this submission for FCC ID: X5B-PL76 02A to be kept confidential. 1. Schematics. 2. Block diagram, 3. Operation description The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, Contact person: Tom Roberts, Chief Technical Officer Date: 2012-0 3-26

Performance Designed Products, LLC DATE: 2012-02-23 To whom it may concern: We the undersigned, hereby authorize (0&&HUW'55$ä(.*PE+and Neutron Engineering Inc.to ac t on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by EMCCert DR. 5$ä(.*PE+ on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from (Performance Designed Products, LLC). Sincerely, (Name and Title) Tom Roberts, Chief Technical Officer

Neutron Engineering Inc. Project No.: 1202C097 Page 2 of 7 1202C097 1202C097 Neutron Engineering Inc. Project No.: 1202C097 Page 2 of 7 1202C097 1202C097 Neutron Engineering Inc. Project No.: 1202C097 Page 3 of 7 1202C097

4mm 19mm

Neutron Engineering Inc. Project No.: 1202C097 Page 4 of 7 1202C097 1202C097 Neutron Engineering Inc. Project No.: 1202C097 Page 4 of 7 1202C097 1202C097 Neutron Engineering Inc. Project No.: 1202C097 Page 5 of 7 1202C097 1202C097 Neutron Engineering Inc. Project No.: 1202C097 Page 5 of 7 1202C097 1202C097 Neutron Engineering Inc. Project No.: 1202C097 Page 6 of 7 1202C097 1202C097 Neutron Engineering Inc. Project No.: 1202C097 Page 6 of 7 1202C097 1202C097 Neutron Engineering Inc. Project No.: 1202C097 Page 7 of 7 1202C097 1202C097 Neutron Engineering Inc. Project No.: 1202C097 Page 7 of 7 1202C097 1202C097

Neutron Engineering Inc. Report No.: NEI-FICP-1-1202C097 Page 1 of 77 FCC/IC Radio Test Report FCC ID: X5B-PL7602A IC: 8814A-PL7602A This report concerns (check one) : Original Grant Class II Change Issued Date : Feb. 28, 2012 Project No. : 1202C097 Equipment : Afterglow Remote For Wii Model Name For FCC : PL-7602 Model Name For IC : PL-7602A Applicant : Performance Designed Products, LLC Address : 14144 Ventura Blvd. Suite 200, Sherman Oaks, CA 91423 Manufacturer : Performance Designed Products, LLC Address : 14144 Ventura Blvd. Suite 200, Sherman Oaks, CA 91423 Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Feb. 16, 2012 Date of Test: Feb. 16, 2012 ~ Feb. 27, 2012 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. Report No.: NEI-FICP-1-1202C097 Page 2 of 77 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1202C097 Page 3 of 77 Table of Contents Page 1 . CERTIFICATION 6 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 3 . GENERAL INFORMATION 9 3.1 GENERAL DESCRIPTION OF EUT 9 3.2 DESCRIPTION OF TEST MODES 11 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 11 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 3.5 DESCRIPTION OF SUPPORT UNITS 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 14 4.1.3 TEST PROCEDURE 15 4.1.4 DEVIATION FROM TEST STANDARD 15 4.1.5 TEST SETUP 15 4.1.6 EUT OPERATING CONDITIONS 15 4.1.7 TEST RESULTS 16 4.2 RADIATED EMISSION MEASUREMENT 17 4.2.1 RADIATED EMISSION LIMITS 17 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 18 4.2.3 TEST PROCEDURE 19 4.2.4 DEVIATION FROM TEST STANDARD 19 4.2.5 TEST SETUP 20 4.2.6 EUT OPERATING CONDITIONS 21 4.2.7 TEST RESULTS (BELOW 30MHZ) 22 4.2.8 TEST RESULTS (BETWEEN30 – 1000 MHZ) 23 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 31 5 . NUMBER OF HOPPING CHANNEL 49 5.1 APPLIED PROCEDURES / LIMIT 49 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 49 5.1.2 TEST PROCEDURE 49 5.1.3 DEVIATION FROM STANDARD 49 5.1.4 TEST SETUP 49 5.1.5 EUT OPERATION CONDITIONS 49 Neutron Engineering Inc. Report No.: NEI-FICP-1-1202C097 Page 4 of 77 Table of Contents Page 5.1.6 TEST RESULTS 50 6 . AVERAGE TIME OF OCCUPANCY 51 6.1 APPLIED PROCEDURES / LIMIT 51 6.1.1 MEASUREMENT INSTRUMENTS LIST 51 6.1.2 TEST PROCEDURE 51 6.1.3 DEVIATION FROM STANDARD 51 6.1.4 TEST SETUP 52 6.1.5 EUT OPERATION CONDITIONS 52 6.1.6 TEST RESULTS 53 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 59 7.1 APPLIED PROCEDURES / LIMIT 59 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 59 7.1.2 TEST PROCEDURE 59 7.1.3 DEVIATION FROM STANDARD 59 7.1.4 TEST SETUP 59 7.1.5 EUT OPERATION CONDITIONS 59 7.1.6 TEST RESULTS 60 8 . BANDWIDTH TEST 62 8.1 APPLIED PROCEDURES / LIMIT 62 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 62 8.1.2 TEST PROCEDURE 62 8.1.3 DEVIATION FROM STANDARD 62 8.1.4 TEST SETUP 62 8.1.5 EUT OPERATION CONDITIONS 62 8.1.6 TEST RESULTS 63 9 . PEAK OUTPUT POWER TEST 65 9.1 APPLIED PROCEDURES / LIMIT 65 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 65 9.1.2 TEST PROCEDURE 65 9.1.3 DEVIATION FROM STANDARD 65 9.1.4 TEST SETUP 65 9.1.5 EUT OPERATION CONDITIONS 65 9.1.6 TEST RESULTS 66 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 68 10.1 APPLIED PROCEDURES / LIMIT 68 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 68 10.1.2 TEST PROCEDURE 68 10.1.3 DEVIATION FROM STANDARD 68 10.1.4 TEST SETUP 68 Neutron Engineering Inc. Report No.: NEI-FICP-1-1202C097 Page 5 of 77 Table of Contents Page 10.1.5 EUT OPERATION CONDITIONS 68 10.1.6 TEST RESULTS 69 11 . EUT TEST PHOTO 75 Neutron Engineering Inc. Report No.: NEI-FICP-1-1202C097 Page 6 of 77 1. CERTIFICATION E q u i p m e n t : Afterglow Remote For Wii Brand Name : N/A Model Name for FCC : PL-7602 Model Name for IC : PL-7602A A p p l i c a n t : Performance Designed Products, LLC Factory : Performance Designed Products, LLC Address : 14144 Ventura Blvd. Suite 200, Sherman Oaks, CA 91423 Date of Test : Feb. 16, 2012 ~ Feb. 27, 2012 T e s t I t e m : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2003/ Canada RSS-210:2010 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, an…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1202C097 Page 67 of 69 11. EUT TEST PHOTO Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1202C097 Page 67 of 69 11. EUT TEST PHOTO Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1202C097 Page 68 of 69 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1202C097 Page 68 of 69 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1202C097 Page 69 of 69 Radiated Measurement Photos Above 1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1202C097 Page 69 of 69 Radiated Measurement Photos Above 1000MHz