X68CRSCANNER1Computed Radiography Scanner (Model: FireCR)

User Manual Computed Radiography Scanner Doc No. : TM -701 Rev 0.1.4 18.Oct.2011 Part No. : CR-FPM-01-001 3DISC, FireCR, Quantor and the 3D Cube are trademarks of 3D Imaging & Simulations Corp, South Korea, and its affiliates. All other trademarks are held by their respective owners and are used in an editorial fashion with no intention of infringement. The data in this publication are for illustration purposes only and do not necessarily represent standards or specifications, which must be met by 3D Imaging & Simulations Corp. All information contained herein is intended for guidance purposes only, and characteristics of the products and services described in this publication can be changed at any time without notice. Products and services may not be available in your local area. Please contact your local sales representative for availability information. 3D Imaging & Simulations Corp. strives to provide as accurate information as possible, but shall not be responsible for any typographical error. © Copyright 2010 3D Imaging & Simulations Corp, all rights reserved, printed, and published in South Korea by 3D Imaging & Simulations Corp. User Manual FireCR TM-701 2 3DISC Americas 45921 Maries Road, #190 Dulles, VA 20166 USA Tel : 1-703-430-6080 E-mail : [email protected] Contact 815, Tamnip-Dong, Yuseong-Gu, Daejeon, Korea Tel : 82-42-931-2100 Fax : 82-42-931-2299 Website : www.3DISCimagning.com E-mail : [email protected] 3DISC Europe Gydevang, 39-41, 3450 Alleroed, Denmark Tel : 45-88-276-650 E-mail : [email protected] User Manual FireCR TM-701 3 INFORMATION TO USER: The device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. NOTE : This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment dose cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver 3.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. User Manual FireCR TM-701 4 Warnings and Used Symbols To ensure the safety of patients, staff and other persons, any changes to software and hardware delivered by 3D Imaging & Simulations Corp. may only be made with prior written permission from 3D Imaging & Simulations Corp. Please read the respective manuals of the connected software, such as acquisition and diagnostic software, before starting to use the FireCR system. The following symbols will be used throughout this manual: DANGER The functionality of the system can be destroyed in the case of incorrect use. If unauthorized changes have been made to delivered system and accessories, the warranty by 3D Imaging & Simulations Corp. becomes void. 3D Imaging & Simulations Corp. will not accept any responsibility or liability for the proper functioning of the product in such a case. WARNING The functionality of the system can be limited in the case of incorrect use. Hints that require special attention. NOTE Notes represent information that is important to know but which do not affect the functionality of the system. User Manual FireCR TM-701 5 General Safety Guidelines All the safety and operating instructions should be read carefully before this device is operated. This device has been designed and tested to meet strict safety requirements applicable to medical equipment, and has been supplied in a safe condition. To ensure personnel and patient safety, the device shall be operated and serviced in compliance with all procedures, warnings and precautions during all phases of operation and service of this device. Failure to comply to with safety guidelines may result in injury to service personnel, operator, or patient. 3D Imaging & Simulations Corp. assumes no liability for failure to comply. If this device is not used as specified, the protection provided by the device could be impaired. This device must be used in a normal condition only. Installation, service and operation of this device should only be undertaken by qualified trained personnel. The operator should study instructions and precautions carefully before starting to use the device listed here and throughout the manual. There are no user serviceable parts inside this device. The device should only be opened and serviced by qualified service personnel. Failure to heed this warning may result in injury to service personnel or damage to equipment, and void any and all warranties. If there is a service problem, please contact 3D Imaging & Simulations Corp. or authorized dealer. Do not spill liquids on the device, and never operate the device in a wet environment. Keep the device from radiators and heat sources. Use the device only with accessories supplied with this device. This device is intended to be grounded. Plug power cord into properly grounded electrical outlets. This cord is equipped with three-prong plugs to help ensure proper grounding. This device contains static sensitive components. Proper static handling procedures and equipment must be used when servicing this device. Do not look inside of the device. User Manual FireCR TM-701 6 If any of the following conditions occur, unplug the device fro…

Text truncated - open the document above for the full version.

Date: October 07, 2011 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Ms. Misoh Kim/Application Examiner of UL-Korea, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. Misoh Kime of UL-Korea on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Korea as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

815, Tamnip-Dong, Yuseong-Gu, Daejeon, Korea Tel : +82-42-931-2100 Fax : +82-42-931-2299 Homepage : www.3-disc.com e-mail : [email protected]

Project Number: 11CAC21120 File Number TC8389 Page 1 of 4 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 1 of 4 - 1 - EUT Photos Front View Project Number: 11CAC21120 File Number TC8389 Page 2 of 4 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 2 of 4 - 2 - Rear View Project Number: 11CAC21120 File Number TC8389 Page 3 of 4 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 3 of 4 - 3 - Adapter View Project Number: 11CAC21120 File Number TC8389 Page 4 of 4 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 4 of 4 - 4 - Adapter View

Project Number: 11CAC21120 File Number TC8389 Page 1 of 2 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 1 of 2 - 1 - 1. Equipment Marking Plate: Label of VetCR Label of FireCR Project Number: 11CAC21120 File Number TC8389 Page 2 of 2 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 2 of 2 - 2 - 2. Label Location: Product Label Location

Project Number: 11CAC21120 File Number TC8389 Page 1 of 17 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 1 of 17 - 1 - EUT Photos Inside View Project Number: 11CAC21120 File Number TC8389 Page 2 of 17 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 2 of 17 - 2 - Inside View Project Number: 11CAC21120 File Number TC8389 Page 3 of 17 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 3 of 17 - 3 - Inside View Project Number: 11CAC21120 File Number TC8389 Page 4 of 17 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 4 of 17 - 4 - BLDC DRIVER PCB Front Project Number: 11CAC21120 File Number TC8389 Page 5 of 17 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 5 of 17 - 5 - BLDC DRIVER PCB Rear Project Number: 11CAC21120 File Number TC8389 Page 6 of 17 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 6 of 17 - 6 - CORE PCB Front Project Number: 11CAC21120 File Number TC8389 Page 7 of 17 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 7 of 17 - 7 - CORE PCB Rear Project Number: 11CAC21120 File Number TC8389 Page 8 of 17 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 8 of 17 - 8 - ERASER PCB Front Project Number: 11CAC21120 File Number TC8389 Page 9 of 17 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 9 of 17 - 9 - ERASER PCB Rear Project Number: 11CAC21120 File Number TC8389 Page 10 of 17 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 10 of 17 - 10 - MAIN BOARF PCB Front Project Number: 11CAC21120 File Number TC8389 Page 11 of 17 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 11 of 17 - 11 - MAIN BOARD PCB Rear Project Number: 11CAC21120 File Number TC8389 Page 12 of 17 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 12 of 17 - 12 - POWER PCB Front Project Number: 11CAC21120 File Number TC8389 Page 13 of 17 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 13 of 17 - 13 - POWER PCB Rear Project Number: 11CAC21120 File Number TC8389 Page 14 of 17 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 14 of 17 - 14 - ROCK MOTOR Front Project Number: 11CAC21120 File Number TC8389 Page 15 of 17 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 15 of 17 - 15 - ROCK MOTOR Rear Project Number: 11CAC21120 File Number TC8389 Page 16 of 17 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 16 of 17 - 16 - RFID PCB Front Project Number: 11CAC21120 File Number TC8389 Page 17 of 17 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 17 of 17 - 17 - RFID PCB Rear

1. 2. 3. 4. 5. 6. CORE BOAR ‐ Control ‐ Transm i BASE BOAR ‐ Supply s ‐ Convert ‐ Drivers PMT(Photo ‐ High se ‐ Detect t RFID BOARD ‐ Read th ‐ Read th ‐ Transmi BLDC BOAR ‐ BLDC m ‐ Control LOCK MOT O RD of all perip h it the image RD several kinds t analog data for peripher Multiplier T nsitive dete c the light from D he informatio he informatio it the inform RD motor driver. BLDC moto r OR BOARD Syste herals for acq data to PC v s of power to a of PMT to d rals. ube) ctor of light. m IP (Imaging on of cassette on of unit ide mation to COR r to maintain m Descr quisition of im via USB comm o peripherals digital data. g Plate). e. entity. REBOARD. n the same sp iption mage data. munication. s. peed. ‐ DC motor driver. ‐ Control DC motor to hold and release cassettes. 7. PERIPHERAL ‐ ERASER : White LED array for erasing existing information in the IP(Imaging Plate). ‐ STEP MOTOR ‐ Aligner DC Motor : Adjust laser beam alignment. ‐ PSD Sensors : PSD (Position Sensitive Detector). Detect the laser beam. ‐ INDICATOR : Display the status of unit. ‐ MICRO SWITCHs : Detect the insertion of cassettes. ‐ RESET SWITCH : System reset button. ‐ PHOTO INTERRUPTERS : Make STEP MOTOR have a movement restrictions. ‐ LASER 8. POWER ADAPTER ‐ Generate the main power of system. ‐ Input : 100 – 240 Vac ‐ Output : 24V DC, max. 6.25A

55 44 33 22 11 D D C C B B A A AS_CLK1AS_CLKAS_SCLKAS_SLOAD ADOUT[0..7] LED_GLED_B AS_CLK2AS_SDATA PMT_CSPMT_CLKPMT_SDI LASER_ONOFF GND_CHASIS ALTDIALTCKALTDOALTMS F_MOT_DISABLEF_MOT_DIRF_MOT_CLK F_LED_BF_LED_G SENSOR_RLEVELAS_SDATASENSOR_LLEVEL F_LOCK_ENABLEPI_OUT0 AS_CLK2AS_SCLKAS_SLOADAS_CLKAS_CLK1ADOUT6ADOUT4ADOUT3ADOUT7ADOUT5ADOUT0ADOUT1ADOUT2PMT_CLKPMT_CSPMT_SDILASER_ONOFF TEMP1TEMP2TEMP3TEMP4 F_ERASER0 F_MOT_CLKF_MOT_DIRF_MOT_DISABLE SENSOR_RLEVELSENSOR_LLEVEL GND F_PSD_CLK2F_PSD_SDI2 MOT_DISABLEMOT_CLKMOT_DIRMC_CLKMC_SDIMC_CS MOT_CLKMOT_DIR MOT_DISABLE F_MC_CLKF_MC_SDIF_MC_CS PI_OUT6 F_PSD_CSn2 EX_TSENSOR3 F_DC_PHASE1F_DC_PHASE2F_DC_I01F_DC_I02F_DC_I11F_DC_I12F_R_STROBEF_L_STROBE F_RPOS_OUTF_LPOS_OUT PI_OUT0PI_OUT1PI_OUT2PI_OUT4PI_OUT6F_LPOS_OUTF_RPOS_OUT RPOS_OUTLPOS_OUT PI_OUT3 F_BUZZER RPOS_OUTLPOS_OUT F_R_STROBEF_L_STROBE TEMP2TEMP1 F_PSD_CSn1F_PSD_CLK1F_PSD_SDI1 F_PSD_CSn1F_PSD_CLK1F_PSD_SDI1 PI_OUT2PI_OUT4 RS232_F_Tx F_LOCK_DIRRS232_F_TxRS232_F_RxTEMP4TEMP3PI_OUT1PI_OUT3 F_PSD_CSn2F_PSD_CLK2F_PSD_SDI2 RS232_F_Rx F_BUZZERF_MC_CLKF_MC_SDIF_MC_CSF_LED_GF_LED_BF_ERASER0 F_DC_PHASE1F_DC_PHASE2F_DC_I01F_DC_I02F_DC_I11F_DC_I12 ERASER0_0LED_GLED_BMC_CLKMC_SDIMC_CSDC_PHASE1DC_PHASE2DC_I01DC_I02DC_I11DC_I12 DC_PHASE1DC_PHASE2DC_I01DC_I02DC_I11DC_I12 F_LOCK_ENABLEF_LOCK_DIR BLDC_FAULTY F_PWM1H1F_PWM1L1F_PWM1H2F_PWM1L2F_PWM1H3F_PWM1L3 F_BLDC_M1F_BLDC_M2F_BLDC_M3 F_PWM1H1F_PWM1L1 F_PWM1L2F_PWM1H2F_PWM1H3F_PWM1L3BLDC_FAULTYF_BLDC_M1 F_BLDC_M2F_BLDC_M3 ERASER0_0EX_TSENSOR3EXGND EX_TSENSOR4 EX_TSENSOR4 +5V +24V_EXT +5V TitleSize Document Number Rev Date: Sheet of Base board - top view 14.0 FireCR C 115 Tuesday, October 11, 2011 TitleSize Document Number Rev Date: Sheet of Base board - top view 14.0 FireCR C 115 Tuesday, October 11, 2011 TitleSize Document Number Rev Date: Sheet of Base board - top view 14.0 FireCR C 115 Tuesday, October 11, 2011 LaserLaser LASER_ONOFF EX_TSENSOR4 SquareRoot SQROUT EdgeSensorEdgeSensor LPOS_OUT RPOS_OUT F_L_STROBEF_R_STROBE SENSOR_RLEVEL SENSOR_LLEVEL F_PSD_CSn1F_PSD_CSn2F_PSD_SDI1F_PSD_SDI2F_PSD_CLK1F_PSD_CLK2 JP1VerdandiII_J2JP1VerdandiII_J2 EXTVCC5V 1 R16 2 P15 3 P16 4 N14 5 N15 6 N16 7 L13 8 L14 9 FCLK6 10 FCLK7 11 L15 12 L16 13 K15 14 K16 15 J13 16 J14 17 J15 18 J16 19 H16 20 H15 21 G16 22 G15 23 F16 24 F15 25 F14 26 F13 27 FCLK5 28 FCLK4 29 D16 30 D15 31 D14 32 C16 33 C15 34 C14 35 B16 36 A15 37 B14 38 A14 39 GND 40 L3 BEAD/SMD/2012 L3 BEAD/SMD/2012 CORE1VerdandiCORE1Verdandi 1234 M1HOLEM1HOLE 1 J2 ERASER1 J2 ERASER1 12345678 PMTPMT PMT_CLKPMT_CSPMT_SDI POWERPOWER M3HOLEM3HOLE 1 BLDC_DRIVERBLDC_DRIVER F_PWM1L1F_PWM1L2F_PWM1L3 BLDC_FAULTY F_PWM1H1F_PWM1H2F_PWM1H3 F_BLDC_M2F_BLDC_M3F_BLDC_M1 JP2VerdandiII_J1JP2VerdandiII_J1 VCC3V3 1 ALTCK 2 ALTDO 3 ALTMS 4 ALTDI 5 GND1 6 FCLK9 7 FCLK8 8 FCLK10 9 FCLK11 10 A3 11 A2 12 B4 13 B3 14 B1 15 C3 16 C2 17 D3 18 D1 19 FCLK0 20 FCLK1 21 F3 22 F2 23 F1 24 G2 25 G1 26 G5 27 (2.5V)J1 28 (2.5V)J2 29 (2.5V)K1 30 (2.5V)K2 31 (2.5V)K5 32 (2.5V)L4 33 (2.5V)L1 34 (2.5V)L2 35 FCLK3 36 FCLK2 37 (2.5V)N1 38 GND2 39 GND3 40 AD_converter AS_D[0..7] AS_SDATAAS_SCLKAS_SLOADAS_CLK2AS_CLK1AS_CLKAD_IN LED_indicatorLED_indicator LED_GLED_B RS232RS232 RS232_F_Tx RS232_F_Rx F_LOCK_DIRF_LOCK_ENABLE MOTOR_ALIGNERMOTOR_ALIGNER DC_PHASE1DC_PHASE2DC_I11DC_I12DC_I01DC_I02 L2 BEAD/SMD/2012 L2 BEAD/SMD/2012 EncoderPIEncoderPI BSOUT0BSOUT1BSOUT2BSOUT4BSOUT6BSOUT3 F_RPOS_OUT LPOS_OUTRPOS_OUT F_LPOS_OUT STK672-050STK672-050 MOT_CLKMOT_DIRMOT_DISABLEMC_SDIMC_CSMC_CLK M6HOLEM6HOLE 1 C2 1uF C2 1uF C1 10uF/3216size C1 10uF/3216size 1 2 M5HOLEM5HOLE 1 M2HOLEM2HOLE 1 Isolator F_LED_B LED_G MOT_DISABLE F_MOT_DIRF_LED_GF_MOT_DISABLE ERASER0_0 MOT_DIR F_MOT_CLK LED_B F_ERASER0 MOT_CLK MC_SDI MC_CS F_MC_CSF_MC_CLK MC_CLK F_MC_SDIF_BUZZER DC_PHASE1DC_PHASE2 F_DC_PHASE1F_DC_I11F_DC_PHASE2F_DC_I12F_DC_I01F_DC_I02 DC_I11DC_I12DC_I01DC_I02 L1 BEAD/SMD/2012 L1 BEAD/SMD/2012 1 2 J15267-06J15267-06 123456 C3 0.1uF C3 0.1uF TSENSORTSENSOR TEMP1TEMP2TEMP3TEMP4 EX_TSENSOR3EX_TSENSOR4 M4HOLEM4HOLE 1 5 4 3 2 1 DCBA A AD_IN AS_SDATAAS_SCLKAS_SLOADAS_CLK2AS_CLK1AS_CLK AS_SCLKAS_SLOAD AS_CLK1AS_CLK2 AS_SDATA AS_CLK AVDD AD_OFFSET AVDD AS_D7AS_D6AS_D5AS_D4AS_D3AS_D2AS_D1AS_D0 AVDD AS_D3AS_D1AS_D4AS_D0AS_D5AS_D7AS_D2AS_D6 AS_D[0..7] +5V AD_OFFSET AS_D[0..7] AS_SDATA AS_SCLK AS_SLOAD AS_CLK2AS_CLK1 AS_CLK AD_IN +5V AVDD +3.3V TitleSize Document Number Rev Date: Sheet of Base board - AD converter 14.0 FireCR A4 215 Tuesday, October 11, 2011 TitleSize Document Number Rev Date: Sheet of Base board - AD converter 14.0 FireCR A4 215 Tuesday, October 11, 2011 TitleSize Document Number Rev Date: Sheet of Base board - AD converter 14.0 FireCR A4 215 Tuesday, October 11, 2011 TP - PAD TYPE Select One L4BEAD/SMD/2012L4BEAD/SMD/2012 C12 0.1uF C12 0.1uF R8 20 R8 20 R5 20 R5 20 R4 20 R4 20 TP1TP1 R14 20 R14 20 R13 20 R13 20 R1 0(OPEN) R1 0(OPEN) R7 20 R7 20 VR1 10K VR1 10K 1 3 2 R12 20 R12 20 R11 20 R11 20 C70.01uFC70.01uF C110.1uFC110.1uF + C1010uF/6.3V/P + C1010uF/6.3V/P 12 R10 20 R10 20 C41uFC41uF C160.01uFC160.01uF 12 R3 0 R3 0 C5 0.1uF C5 0.1uF C60.1uFC60.1uF C150.1uFC150.1uF 12 C140.01uFC140.01uF 12 C9 0.1uF C9 0.1uF U1AD9826U1AD9826 CDSCLK1 1 CDSCLK2 2 ADCCLK 3 OEB 4 DRVDD 5 DRVSS 6 (MSB)D7 7 D6 8 D5 9 D4 10 D3 11 D2 12 D1 13 D0 14 SDATA 15 SCLK 16 SLOAD 17 AVDD 18 AVSS 19 CAPB 20 CAPT 21 VINB 22 CML 23 VING 24 OFFSET 25 VINR 26 AVSS 27 AVDD 28 R17 20 R17 20 R16 20 R16 20 C130.1uFC130.1uF 12 C8 0.1uF C8 0.1uF R9 20 R9 20 R15 20 R15 20 R6 20 R6 20 L5BEAD/SMD/2012L5BEAD/SMD/2012 R2 0 R2 0 55 44 33 22 11 D D C C B B A A F_PWM1H1 M1M3 EXGND F_PWM1L1F_PWM1H2F_PWM1L2F_PWM1L3F_PWM1H3 SHUNT_HIGH_SUM SHUNT_LOW_SUM M2 M1 SHUNT_HIGH_SUM SHUNT_HIGH_SUM SHUNT_HIGH_SUM PWM1L1PWM1H1PWM1L2PWM1H2 PWM1L3 PWM1H3 M1 M2 M3 SHUNT_LOW_SUM B_PWM1L2B_PWM1H3B_PWM1L3B_PWM1H2B_PWM1H1B_PWM1L1 B_PWM1H1 B_PWM1L1 B_PWM1H2 B_PWM1L2 B_PWM1H3 B_PWM1L3 +5V_EXT BLDC_M1 +5V_EXT +5V_EXT BLDC_M2 +5V_EXT EXGND M2 +5V_EXT BLDC_M3 +5V_EXT EXGND M3 +5V_EXT +5V_EXT EXGND FAULTY FAULTYBLDC_M2BLDC_M1BLDC_M3 PWM1H1_T PWM1L1 PWM…

Text truncated - open the document above for the full version.

UL Korea, Ltd A not-for-profit organization dedicated 33 rd FL, Gangnam Finance Center, 737 to public safety and committed to Yeoksam-dong, Gangnam-gu, Seoul quality service for over 100 years 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Underwriters Laboratories Inc. www.ul.com/emc www.ulk.co.kr Project: 11CA21120 File: TC8389 Report 11CA21120-FCC Date: September 15, 2011 Model: FireCR (Basic) and VetCR FCC Certification Report For Computed Radiography Scanner 3D Imaging & Simulations Corp. 815, Tamnip-Dong, YUSEONG-GU, Daejeon, Korea Copyright  2005 Underwriters Laboratories Inc. 33rdFl. Gangnam finance Center, 737 Yeoksam-Dong, Kangnam-Gu, Seoul, 135-984, Korea Underwriters Laboratories Inc. authorizes the above-named company to reproduce this Report provided it is reproduced in its entirety. Project Number: 11CAC21120 File Number TC8389 Test Report No: 11CAC21120-FCC Model Number: FireCR Date of Issue: September 26, 2011 Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 2 of 16 - 2 - Test Report Details Test report No: 11CA21120-FCC File No: TC8389 Tests Performed By: UL Korea Ltd. 33 rd FL. Gangnam Finance Center, 737 Yeoksam-dong, Kangnam-ku, Seoul, 135-984, Korea Test site: Digital EMC Co., Ltd. 683-3, Yubang-Dong, Cheoin-Gu, Yongin-Si, Kyunggi-Do, Korea, 449-080 The test facility was deemed to have the environment and capabilities necessary to perform the tests included in the test package Applicant: 3D Imaging & Simulation Corp. 815, Tamnip-Dong, YUSEONG-GU, Daejeon, Korea Manufacturer: 3D Imaging & Simulation Corp. 815, Tamnip-Dong, YUSEONG-GU, Daejeon, Korea Factory: 3D Imaging & Simulation Corp. 815, Tamnip-Dong, YUSEONG-GU, Daejeon, Korea Applicant Contact: Jungkook, Kim Title: General Manager Phone: +82-42-931-2100 E-mail: [email protected] Product Type: Computed Radiography Scanner Trademark: Model Number: FireCR (Basic) , VetCR FCC ID: X68CRSCANNER1 Product standards FCC Part 15 Subpart B Class B Test Procedure ANSI C63.4 : 2003 Sample Serial Number: None (Proto type) Sample Receive Date: July 4, 2011 Testing Start Date: July 4, 2011 Date Testing Complete: September 16, 2011 Overall Results: PASS UL Korea Ltd. reports apply only to the specific samples tested under stated test conditions. All samples tested were in good operating condition throughout the entire test program. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical componens. UL Korea Ltd. shall have no liability for any deductions, inferences or generalizations drawn by the client or others from UL Korea Ltd. issued reports. Project Number: 11CAC21120 File Number TC8389 Test Report No: 11CAC21120-FCC Model Number: FireCR Date of Issue: September 26, 2011 Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 3 of 16 - 3 - Summary of Test Results: The following tests were performed on a sample submitted for evaluation of compliance 47 CFR Part 15.107 (a) / 47 CFR Part 15.109 (g) Class B and ICES-003, Class B digital Apparatus. Test # Test Name Test Requirement/Specification Compliant Not Compliant See Remark 1 AC Power line Conducted Emission Test X - - 2 Radiated Emission Test X - - The tests listed in the Summary of Testing section of this report have been performed and the results recorded by UL Korea, Ltd. in accordance with the procedures stated in each test requirement and specification. The applicant determined the list of tests performed were applicable to the Equipment Under Test. As a result, the subject product has been verified to comply or not comply as noted in the Summary of Testing with each test specification. The test results relate only to the items tested. The equipment under test has Met the technical requirements Not met the technical requirements Tested by Sung Hoon, Baek, Project Engineer Reviewed by Jeawoon, Choi, Senior Project Engineer Conformity Assessment Services - 3014ASEO Conformity Assessment Services – 3014ASEO UL Korea Ltd. UL Korea Ltd. September 26, 2011 September 26, 2011 Project Number: 11CAC21120 File Number TC8389 Test Report No: 11CAC21120-FCC Model Number: FireCR Date of Issue: September 26, 2011 Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 4 of 16 - 4 - REPORT DIRECTORY 1. GENERAL PRODUCT DESCRIPTION ------------------------------------------------------------------------------- 5 1.1 REPORT REVISION HISTORY ----------------------------------------------------------------------------------------- 5 1.2 EQUIPMENT DESCRIPTION ------------------------------------------------------------------------------------------- 5 1.3 DETAILS OF TEST EQUIPMENT (EUT) ---------------------------------------------------------------------------- 5 1.4 TECHNICAL DATA: ------------------------------------------------------------------------------------------------------- 6 1.5 TECHNICAL DESCRIPTIONS AND DOCUMENTS: ------------------------------------------------------------- 6 1.6 EQUIPMENT MARKING PLATE: ------------------------------------------------------------------------------------- 7 1.7 EQUIPMENT USED DURING TEST:---------------------------------------------------------------------------------- 8 1.8 EUT INPUT/OUTPUT PORTS: ------------------------------------------------------------------------------------------ 8 1.9 EUT INTERNAL OPERATING FREQUENCIES: ------------------------------------------------------------------ 8 1.10 POWER INTERFACE: ----------------------------------------------------------------------------------------------------- 8 2. TEST CONDITION --------------------------------------------------------------------------------------------------------- 9 2.1 TEST MODE: -------------------------------------…

Text truncated - open the document above for the full version.

Project Number: 11CAC21120 File Number TC8389 Page 1 of 2 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 1 of 2 - 1 - Figure 1. Conducted Emission Test Setup: Project Number: 11CAC21120 File Number TC8389 Page 2 of 2 Model Number: FireCR Client Name 3D Imaging & Simulations Corp. UL Korea Ltd. FCC Certificate Test for 3D Imaging & Simulation Corp. FCC ID: X68CRSCANNER1 2 of 2 - 2 - Figure 2. Photo of Radiated emission test setup: