X7J-A100517022400 - 2483.5 MHz Transceiver

Anaren Integrated Radio A8520E24A91 User’s Manual Release Date: 02/27/12 THIS PAGE LEFT INTENTIONALLY BLANK iii USER'S MANUAL Model A8520E24A91 Contents 1. Overview .......................................................................................................................................................... 5 1.1. Features....................................................................................................................................................... 6 1.2. Theory of Operation.................................................................................................................................. 6 1.2.1. Network Topology and Nomenclature ................................................................................................ 8 1.2.2. Adaptive Frequency Hopping ............................................................................................................. 9 1.3. Applications ............................................................................................................................................. 10 2. Approvals and Usage ................................................................................................................................... 11 2.1. Product Approvals .................................................................................................................................. 11 2.1.1. USA (Federal Communications Commission, FCC) ......................................................................... 11 2.1.1.1. FCC Labeling Requirements ................................................................................................ 11 2.1.1.2. End User Manual ................................................................................................................... 12 2.1.1.3. RF Exposure ............................................................................................................................ 12 2.1.2. Canada (Industry Canada, IC) .......................................................................................................... 13 2.1.2.1. IC Labeling Requirements .................................................................................................... 13 2.1.2.2. RF Exposure ............................................................................................................................ 14 2.1.3. Europe (Conformité Européenne, ) ............................................................................................... 15 2.2. Potential Interference Sources ............................................................................................................... 16 2.3. Approved Usage ..................................................................................................................................... 16 2.3.1. USA and Canada............................................................................................................................... 16 2.3.2. Europe ............................................................................................................................................... 17 3. Electrical Characteristics .............................................................................................................................. 18 3.1. Absolute Maximum Ratings .................................................................................................................. 18 3.2. Operating Conditions ............................................................................................................................. 19 3.3. Pin Out ...................................................................................................................................................... 19 3.4. Recommended Layout (dimensions in mm) ...................................................................................... 21 3.5. Power Supply Considerations ............................................................................................................... 22 4. Mechanical and Process ................................................................................................................................ 24 4.1. Radio Module Details (dimensions in mm) ........................................................................................ 24 4.2. Packaging Details (dimensions in mm) ............................................................................................... 24 4.2.1. Matrix Tray Packaging ..................................................................................................................... 25 4.2.2. Tape-Reel Packaging ......................................................................................................................... 25 4.3. Soldering................................................................................................................................................... 26 4.3.1. Manual Mounting Procedure ........................................................................................................... 26 4.3.2. Automated Mounting Procedure ...................................................................................................... 27 5. Configuration and Programming ............................................................................................................... 29 5.1. Calibrating Transmit Power .................................................................................................................. 29 5.2. Programming ........................................................................................................................................... 30 THIS PAGE LEFT INTENTIONALLY BLANK A8520E24A91 – User’s Manual Page 5 of 34 Release Date 02/27/12 1. Overview The A8520E24A91 module is a surface mount module integrating a CC8520PurePath™ wireless audio transceiver with the CC2591 PA/LNA device for increased range and an integral …

Text truncated - open the document above for the full version.

Applicant/Grantee Anaren Microwave, Inc. FCC ID: X7J-A10051702 Section 15.212 Modular Transmitters Request for Modular Approval Request for Limited Modular Approval Requirements EUT Conditions Comply (Y/N) Single Modular Approval Requirements 1 The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. The Anaren modular transmitter has a cover over the radio elements, with the antenna. YES 2 The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. The Anaren modular transmitter has built-in data buffering. YES 3 The modular transmitter must have its own power supply regulation. The module has internal regulation to allow an input voltage range of 2.2 to 3.6 volts. YES 4 The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. The Anaren modular transmitter uses a permanently connected internal antenna. YES 5 The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with Part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to The modular device was tested in a stand-alone configuration with the help of another board which supplied only physical support, data source/sink and power connections. YES the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see Section 15.31(i)). 6 The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. (A) If using a permanently affixed label, the modular transmitter must be labeled with its own FCC identification number, and, if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. (B) If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC certified transmitter module(s).” Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. The Anaren modular transmitter is marked with a unique FCC identification number. See drawing included with the application for location of the marking. Instructions are given to the end user in the module data sheet that if the module is installed inside another device, then the outside of the device must also display a label referring to the enclosed module YES 7 The modular transmitter must comply with any specific rules or operating Please refer to the "OEM User's Manual" supplied separately. YES requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. 8 The EUT meets the RF Exposure requirements. The EUT meets the RF Exposure requirements. YES A limited modular approval may be granted for single or split modular transmitters that do not comply with all of the above requirements, e.g., shielding, minimum signaling amplitude, buffered modulation/data inputs, or power supply regulation, if the manufacturer can demonstrate by alternative means in the application for equipment authorization that the modular transmitter meets all the applicable Part 15 requirements under the operating conditions in which the transmitter will be used. Limited modular approval also may be granted in those instances where compliance with RF exposure rules is demonstrated only for particular product configurations. The applicant for certification must state how control of the end product into which the module will be installed will be maintained su…

Text truncated - open the document above for the full version.

Anaren Microwave, Inc. 6635 Kirkville Road East Syracuse, NY 13057 Phone: 315 432 8909 Fax: 315 432 9121 www.anaren.com Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: X7J-A10051702 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely.  Schematic Diagram Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until August 15, 2012.  External Photos  Internal Photos  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Kurt A. Richardson Product Line Manager Anaren Inc. February 7, 2012

Anaren Inc. A8520E24A91 Audio Module - Certification Pictures Front – External

Anaren Inc. A8520E24C91 Audio Module - Certification Pictures Front – External

Anaren Inc. A8520E24A91 Audio Module - Certification Pictures Front – Internal Rear – Internal / External

Anaren Inc. A8520E24C91 Audio Module - Certification Pictures Front – Internal Rear – Internal / External

FCC CFR47 PART 15 SUBPART C INDUSTRY CANADA RSS-210 ISSUE 8 CERTIFICATION TEST REPORT FOR 2400 – 2483.5 MHZ TRANSCEIVER MODEL NUMBER: A8520E24A91 and A8520E24C91* FCC ID: X7J-A10051702 IC: 8975A-A10051702 REPORT NUMBER: 11U13980-1, Revision A ISSUE DATE: FEBRUARY 8, 2012 Prepared for ANAREN, INC. 6635 KIRKVILLE ROAD EAST SYRACUSE, NEW YORK, 13057-9600, U.S.A. Prepared by COMPLIANCE CERTIFICATION SERVICES (UL CCS) 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 *For model differences please refer to details under section 5.2 REPORT NO: 11U13980-1A DATE: FEBRUARY 8, 2012 FCC ID: X7J-A10051702 IC: 8975A-A10051702 Page 2 of 49 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4701C 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. Revision History Rev. Issue Date Revisions Revised By --- 01/04/12 Initial Issue F. Ibrahim A 02/08/12 Revised typos on report and updated description for Maximum Output power A. Zaffar REPORT NO: 11U13980-1A DATE: FEBRUARY 8, 2012 FCC ID: X7J-A10051702 IC: 8975A-A10051702 Page 3 of 49 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4701C 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS .................................................................................... 4 2. TEST METHODOLOGY ........................................................................................................ 5 3. FACILITIES AND ACCREDITATION .................................................................................... 5 4. CALIBRATION AND UNCERTAINTY .................................................................................. 5 4.1. MEASURING INSTRUMENT CALIBRATION ................................................................ 5 4.2. SAMPLE CALCULATION ............................................................................................... 5 4.3. MEASUREMENT UNCERTAINTY ................................................................................. 6 5. EQUIPMENT UNDER TEST ................................................................................................. 7 5.1. DESCRIPTION OF EUT ................................................................................................. 7 5.2. MANUFACTURER’S DESCRIPTION OF MODEL DIFFERENCES ............................... 7 5.3. MAXIMUM OUTPUT POWER ........................................................................................ 7 5.4. DESCRIPTION OF AVAILABLE ANTENNAS ................................................................ 7 5.5. SOFTWARE AND FIRMWARE ...................................................................................... 7 5.6. WORST-CASE CONFIGURATION AND MODE ............................................................ 7 5.7. DESCRIPTION OF TEST SETUP .................................................................................. 8 6. TEST AND MEASUREMENT EQUIPMENT ....................................................................... 10 7. ANTENNA PORT TEST RESULTS .................................................................................... 11 7.1.1. 6 dB BANDWIDTH ................................................................................................ 11 7.1.2. 99% BANDWIDTH ................................................................................................ 14 7.1.3. OUTPUT POWER ................................................................................................. 17 7.1.4. AVERAGE POWER .............................................................................................. 18 7.1.5. POWER SPECTRAL DENSITY ............................................................................ 19 7.1.6. CONDUCTED SPURIOUS EMISSIONS ............................................................... 22 8. RADIATED TEST RESULTS .............................................................................................. 26 8.1. LIMITS AND PROCEDURE ......................................................................................... 26 8.2. TRANSMITTER ABOVE 1 GHz ................................................................................... 27 8.3. WORST-CASE BELOW 1 GHz .................................................................................... 34 8.4. RX SPURIOUS EMISSIONS ABOVE 1 GHz ............................................................... 37 9. AC POWER LINE CONDUCTED EMISSIONS ................................................................... 38 10. MAXIMUM PERMISSIBLE EXPOSURE ......................................................................... 42 11. SETUP PHOTOS ............................................................................................................. 46 REPORT NO: 11U13980-1A DATE: FEBRUARY 8, 2012 FCC ID: X7J-A10051702 IC: 8975A-A10051702 Page 4 of 49 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4701C 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. 1. ATTESTATION OF TEST RESULTS COMPANY NAME: ANAREN, INC 6635 KIRKVILLE ROAD EAST SYRACUSE, NY, 13057, U.S.A. EUT DESCRIPTION: 2400 – 2483.5 MHZ TRANSCEIVER MODEL: A8520E24A91 and A8520E24C91 SERIAL NUMBER: Unit 01 DATE TESTED: OCTOBER 05 - DECEMBER 16, 2011 APPLICABLE STANDARDS STANDARD TEST RESULTS CFR 47 Part 15 Subpart C Pass INDUSTRY CANADA RSS-210 Issue 8 Annex 8 Pass INDUSTRY CANADA RSS-GEN Issue 3 Pass Compliance Certification Services, Inc. (UL CCS) tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by UL CCS based…

Text truncated - open the document above for the full version.

REPORT NO: 11U13980-1A DATE: FEBRUARY 8, 2012 FCC ID: X7J-A10051702 IC: 8975A-A10051702 Page 46 of 49 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4701C 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. 11. SETUP PHOTOS ANTENNA PORT CONDUCTED RF MEASUREMENT SETUP ANTENNA PORT CONDUCTED PHOTO REPORT NO: 11U13980-1A DATE: FEBRUARY 8, 2012 FCC ID: X7J-A10051702 IC: 8975A-A10051702 Page 47 of 49 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4701C 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. RADIATED RF MEASUREMENT SETUP (UL Fremont) RADIATED FRONT PHOTO – Worst-case orientation RADIATED BACK PHOTO - Worst-case orientation REPORT NO: 11U13980-1A DATE: FEBRUARY 8, 2012 FCC ID: X7J-A10051702 IC: 8975A-A10051702 Page 48 of 49 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4701C 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. RADIATED RF MEASUREMENT SETUP (UL Melville) RADIATED FRONT PHOTO – Worst-case orientation RADIATED BACK PHOTO - Worst-case orientation REPORT NO: 11U13980-1A DATE: FEBRUARY 8, 2012 FCC ID: X7J-A10051702 IC: 8975A-A10051702 Page 49 of 49 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4701C 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. POWERLINE CONDUCTED EMISSIONS MEASUREMENT SETUP END OF REPORT LINE CONDUCTED FRONT PHOTO LINE CONDUCTED BACK PHOTO