X8Q-SMN-5X18High Performance Broadband Wireless System

Copyright © 2004-2012 by InfiNet Wireless i Revision date: 27 October 2013 InfiNet Wireless R5000 Technical User Manual Copyright © 2004-2012 by InfiNet Wireless ii Legal Rights © Copyright 2012 InfiNet Wireless. All rights reserved. The information contained in this document is originated by, proprietary, confidential and owned by InfiNet Wireless. No part of this document should be disclosed, reproduced or distributed without the express written permission of InfiNet Wireless Ltd. InfiNet Wireless Ltd. reserves the right to change the information contained in this document without prior notice. No part of this document may be considered as a part of any contract or warranty. Statement of Conditions The information contained in this manual is subject to change without notice. InfiNet Wireless Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this manual or equipment supplied with it. Disclaimer The software is sold on an "AS IS" basis. InfiNet Wireless, its affiliates or its licensors make no warranties, whatsoever, whether express or implied, with respect to the software and the accompanying documentation. Infinet Wireless specifically disclaims all implied warranties of merchantability and fitness for a particular purpose and non-infringement with respect to the software. Units of product (including all the software) delivered to purchaser hereunder are not fault_ tolerant and are not designed, manufactured or intended for use or resale in applications where the failure, malfunction or inaccuracy of products carries a risk of death or bodily injury or severe physical or environmental damage (“high risk activities”). High risk activities may include, but are not limited to, use as part of on-line control systems in hazardous environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, life support machines, weapons systems or other applications representing a similar degree of potential hazard. Infinet wireless specifically disclaims any express or implied warranty of fitness for high risk activities. InfiNet Wireless hereby declares that R5000-Omx(b), R5000-Mmx(b), R5000-Smn(c) and R5000-Lmn are in compliance with the essential requirements and other relevant provisions of Directive 1995/5/EC. The declaration of conformity may be consulted at http://www.infinetwireless.com/products-technologies/type-approval- certificates/DoC_RTTE.pdf. Indication of the countries InfiNet Wireless equipment has no geographical limitations for selling and can be supplied to any country of the world. Limitation of Liability Infinet Wireless shall not be liable to the purchaser or to any third party, for any loss of profits, loss of use, interruption of business or for any indirect, special, incidental, punitive or consequential damages of any kind, whether arising under breach of contract, tort (including negligence), strict liability or otherwise and whether based on this agreement or otherwise, even if advised of the possibility of such damages. To the extent permitted by applicable law, in no event shall the liability for damages hereunder of Infinet Wireless or its employees or agents exceed the purchase price paid for the product by purchaser, nor shall the aggregate liability for damages to all parties regarding any product exceed the purchase price paid for that product by that party (except in the case of a breach of a party’s confidentiality obligations). International Regulatory Information This equipment has been tested and found to comply with the limits for a Class B digital device Copyright © 2004-2012 by InfiNet Wireless ii Hereby, InfiNet Wireless declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Important statements Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated outdoor with a minimum distance of 2 meters between the radiator and the human body. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. R5000-Smn model has been designed to operate with the antennas listed below having a maximum gain of 28 dBi. Antennas not included in this list or having a gain greater than specified above are strictly prohibited for use with this device. Antennas allowed to use are as follows: • Mars Antennas MA-WA56-DP25N – 23 dBi directional antenna • Mars Antennas MA-WA56-DP28N – 28 dBi directional antenna • Mars Antennas MA-WD56-DP16 – 16 dBi 90 deg sector antenna • Mars Antennas MA-WA56-DP20 – 21 dBi directional antenna • Mars Antennas MA-WA56-DP19 – 19 dBi directional antenna The required antenna impedance is 50 Ohms. This equipment must be professionally installed. The installer is responsible for verifying that the allowed antenna is employed with the unit. InfiNet Wireless R5000 Technical User Manual iv Copyright © 2004-2012 by InfiNet Wireless Table of contents I. GETTING STARTED ................................................................................................................. 8 1. Scope of this document ............................................................................................................... 8 Getting started ....................................................................................................................... 8 Hardware description .............................................................................................................. 8 Insta…

Text truncated - open the document above for the full version.

EUT_External Picture

Label FCC ID X8Q-SMN-5X18 Model: R5000-Smn

Photograph 1. Back_Full EUT Board Photograph 2. Back_Sub Part 1 Photograph 3. Back_Sub Part 2 Photograph 4. EUT_External Picture Photograph 5. Front_Full EUT Board Photograph 6. Front_Sub Part 1 Photograph 7. Front_Sub Part 2 Picture 2 Photograph 8. Front_Sub Part 2

� - 3 - MA-WA56-DP19IF � � � 4.9-6.1 GHz Dual Polarization Subscriber Antenna MA-WA56-DP19IF � Specifications: ����������� Frequency range 4.9 - 5.875 GHz 5.875 - 6.1 GHz GAIN, (without cable) 19 ± 1 dBi 19 ± 1 dBi VSWR, max. 1.7 : 1 2 : 1 Polarization Dual Pole Linear, Vertical & Horizontal 3 dB Beam-Width, H-Plane, typ. 16� �� � 3 dB Beam-Width, E-Plane, typ. 16� �� � Side Lobes, min. ETSI TS2 Cross Polarization, min. - 16 dB (-20 dB typ.) Port to Port Isolation, min. - 25 dB (-30 dB typ.) Front to Back Ratio, min. ETSI TS2 Input power, max 10 Watt Input Impedance 50 Ohm Lightning Protection DC Grounded ������������ Dimensions (HxWxD) 202 x 202 x 33 mm Connector 2 x Pigtail UFL Weight 320 gr. Radome UV Protected Polycarbonate Mounting Provision for InFinet radio �������������� Operating Temperature Range - 55�C to + 65�C Vibration According to IEC 60721-3-4 Wind Load 200 Km/h (Survival) Flammability UL94 Humidity ETS 300 019-1-4,EN 302 085 (Annex A.1.1) Salt Fog According to IEC 68-2-11 � � � � � �

4.9-5.875 GHz Dual Polarization/Dual Slant Subscriber Antenna MA-WA56-DP20 MARS 5 GHz Dual Polarized Antenna designed to provide full coverage for the 5 GHz frequency band. Additional Features: dual slant if mounted diagonally efficient and stable performance high gain/size ratio light weight and durable construction UV protected radome made of polycarbonate allowing for harsh weather installations easy mounting allowing for Az/El adjustment Specifications: Electrical Frequency range 4.9 - 5.875 GHz Gain 21 dBi ± 1 VSWR, max. 1.7:1 3 dB Beam-Width, H-Plane, typ. 12 ° 3 dB Beam-Width, E-Plane, typ. 12 ° Side Lobes, min. ETSI TS3 PolarizationLinear, Vertical and Horizontal Cross Polarization, min.-18 dB Port to Port Isolation- 30 dB Front to Back Ratio, min.ETSI TS3 Input power, max10 Watt Input Impedance50 Ohm Lightning ProtectionDC Grounded Mechanical Dimensions (HxWxD)305 x 305 x 15 mm (12" x12" x1.6") Weight900 gr. Connector2 x N-Type Female (optional - 2 x SMA Female) RadomeUV Protected Polycarbonate MountMNT-22 Environmemtal Operating Temperature Range- 55°C to + 65°C VibrationAccording to IEC 60721-3-4 Wind Load200 Km/h (Survival) FlammabilityUL94 Water ProofingIP-67 HumidityETS 300 019-1-4,EN 302 085 (Annex A.1.1) Salt FogAccording to IEC 68-2-11 Ordering Options Antenna with mountMA-WA56-DP20 B Antenna with 2xN-Type, Female Connector suited for MNT-22MA-WA56-DP20 N MARS reserves the right to make technical changes or modifications to any of its products and specifications without prior notice and without implementing such changes to prior supplied products. Product images are representative and indicative only. Warranty terms and general conditions of sale are applicable on any purchase of any product and are available in the “Policies― section.

4.9-5.875 GHz Dual Polarized/ Dual Slant Antenna MA-WA56-DP25N MARS 5 GHz Dual Polarized Antenna designed to provide terminated coverage for the 5 GHz frequency band. Additional Features: - dual slant if mounted diagonally - efficient and stable performance - high gain/size ratio - light weight and durable construction - UV protected radome made of polycarbonate allowing for harsh weather installations - easy mounting allowing for Az/El adjustment Specifications: Electrical Frequency range 4.9 - 5.875 GHz Gain 23.5 dBi V-Pol:24.5 ± 1 dBi H-Pol:23.5 ± 1 dBi VSWR, max. 1.7:1 3 dB Beam-Width, H-Plane, typ. 7 ° -9 3 dB Beam-Width, E-Plane, typ. 7 ° -9 Side Lobes, min. ETSI TS3, TS4, TS5 PolarizationLinear, Vertical and Horizontal Cross Polarization,typ.-25 dB Port to Port Isolation- 30 dB Front to Back Ratio, min.ETSI TS3, TS4, TS5 Input power, max5 Watt Input Impedance50 Ohm Lightning ProtectionDC Grounded Mechanical Dimensions (HxWxD)370 x 370 x 40 mm (14.5" x14.5" x1.6") Weight1.8 kg Connector2 x N-Type, Female Back PlaneAluminum; protected through chemical passivation RadomeUV Protected Polycarbonate MountMNT-22 Environmemtal Operating Temperature Range-40° C to +65° C VibrationAccording to IEC 60721-3-4 Wind Load200 km/h (survival) FlammabilityUL94 Water ProofingIP-67 HumidityETS 300 019-1-4, EN 302 085 (annex. A.1.1) Salt FogAccording to IEC 68-2-11 Service Life> 10 years Ordering Options Antenna Suited for MNT-22 (optional wall/pole adjustable mount)MA-WA56-DP25N Antenna with mountMA-WA56-DP25N B MARS reserves the right to make technical changes or modifications to any of its products and specifications without prior notice and without implementing such changes to prior supplied products. Product images are representative and indicative only. Warranty terms and general conditions of sale are applicable on any purchase of any product and are available in the “Policies― section.

�� �������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� � � � ����������������������������������������������������������������������� ���������������� � ���������������������������������������������� ����������������������������������������������������� ����������������������� �� ��������������������������������� �� ��������������������� �� ��������������������� �� ������������������������������������������ ����������������������������������������� � �� ����������������� ������������ ���������������� ������������ ����������������������������������������� �������������� �������������������������������������� ������������������������������ �������� �������� ������������� �������������� �������������� ������������� ������������ ������������� ����������� ������������ ������������������������������������������������������ ����������������������������� ������������������������������ ���������������������� ����� ��������������������� ��������������������������������� ����������������������� �������������������������������������������������������� ������������������������������������������������������������������������� ������������������������� ���������������� ����������������� ������� ������� ������� ������� ������� ������� ������� ������� ������� ������� ����������������������������������� ������������������������������������ ������������������������� ����������������������� ��������������������������������� ������������ ������������������������������������������������������������ �������������� ������������������������������������ ������������������������������������������������������������� ����������������������������������� ���������������������������������������� �������������� ���������������������� ������ ��������������������� ������������������������������������� ������������������������������ ������������������ ��������������������� �������������������������������������������������� ���������������������������������� � � �

 - 3 - MA-WD56-DP16IF             !" #$%$&   Frequency range 4.9-6.1 GHz GAIN, typ. 16 dBi VSWR, max. 1.7 : 1 Polarization Dual, Vertical & Horizontal 3 dB Beam-Width, H-Plane, typ. 90   3 dB Beam-Width, E-Plane, typ. 8   Side Lobes, min ETSI EN 302 085 V1.2.3 Cross Polarization, min. -15 dB Front to Back Ratio, min. -30 dB Port to Port Isolation, typ. -45 dB Input power, max 10 Watt Input Impedance 50 Ohm Lightning Protection DC Grounded    Dimensions (HxWxD) 370 x 370 x 30 mm Weight 2 Kg. Connector 2 x SMA Right Angle Female Back Plane Aluminum protected through chemical passivation Radome UV Protected, Plastic Mount Studs Provision for InFinet Radio      Operating Temperature Range - 55  C to + 65  C Vibration According to IEC 60721-3-4 Wind Load 200 km/h (survival) Flammability UL94 Water Proofing IP-67 Humidity ETS 300 019-1-4, EN 302 085 (annex A.1.1) Salt Fog According to IEC 68-2-11 Ice and Snow 25mm radial (survival) Service Life >10 years Specifications subject to change without notice    

§ 15.247(i) Maximum Permissible Exposure RF Exposure Requirements: §1.1307(b)(1) and §1.1307(b)(2): Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission’s guidelines. RF Radiation Exposure Limit: §1.1310: As specified in this section, the Maximum Permissible Exposure (MPE) Limit shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in Sec. 1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of Sec. 2.1093 of this chapter. Peak Conducted Power of 28dBi antenna= 12.62dBm = 18.28mW 28dBi antenna gain in terms of linear value= 630.95 The limit for maximum RF exposure for 5.8GHz device is 1mW/cm^2 The formula for calculating RF exposure is given as S= P=18.28mW, G= 630.95 & R=20cm, then S comes out to be 2.295mW/cm^2 which was over the limit specified in 1.1310 Distance R at which S= 1mW/cm^2 are given as under: R=(PG/4πS)^0.5 By inserting all the values in right hand side of above equation we get R=30.30cm

MET Laboratories, Inc. Safety Certification - EMI - Telecom Environmental Simulation 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230-3432 • PHONE (410) 354-3300 • FAX (410) 354-3313 33439 WESTERN AVENUE • UNION CITY, CALIFORNIA 94587 • PHONE (510) 489-6300 • FAX (510) 489-6372 3162 BELICK STREET • SANTA CLARA, CA 95054 • PHONE (408) 748-3585 • FAX (510) 489-6372 13301 MCCALLEN PASS • AUSTIN, TEXAS 78753 • PHONE (512) 287-2500 • FAX (512) 287-2513 The Nation’s First Licensed Nationally Recognized Testing Laboratory November 27, 2013 InfiNet Malta LTD 222 Merchants Street Valletta VLT1170, Malta Dear Andrey Koynov, Enclosed is the EMC Wireless test report for compliance testing of the InfiNet Malta LTD, InfiNet Wireless R5000-Smn as tested to the requirements of Title 47 of the CFR, Ch. 1 (10-1-06 ed.), Part 15, Subpart B and ICES-003, Issue 5 August 2012 for a Class A Digital Device, and FCC Part 15 Subpart C and RSS-210, Issue 8, Dec. 2010 for Intentional Radiators. Thank you for using the services of MET Laboratories, Inc. If you have any questions regarding these results or if MET can be of further service to you, please feel free to contact me. Sincerely yours, MET LABORATORIES, INC. Jennifer Warnell Documentation Department Reference: (\InfiNet Malta LTD\EMC39434B-FCC247 Rev. 1) Certificates and reports shall not be reproduced except in full, without the written permission of MET Laboratories, Inc. Electromagnetic Compatibility InfiNet Malta LTD Cover Page InfiNet Wireless R5000-Smn CFR Title 47, Part 15B, 15.247; RSS-210, Issue 8, Dec. 2010 & ICES-003 MET Report: EMC39434B-FCC247 Rev. 1 © 2013, MET Laboratories, Inc. Page ii of xiv DOC-EMC702 6/18/2009 Electromagnetic Compatibility Criteria Test Report for the InfiNet Malta LTD InfiNet Wireless R5000-Smn Tested under the FCC Certification Rules contained in Title 47 of the CFR, Parts 15 Subpart B & ICES-003 for Class A Digital Devices & 15.247 Subpart C & RSS-210, Issue 8, Dec. 2010 for Intentional Radiators MET Report: EMC39434B-FCC247 Rev. 1 November 27, 2013 Prepared For: InfiNet Malta LTD 222 Merchants Street Valletta VLT1170, Malta Prepared By: MET Laboratories, Inc. 914 W. Patapsco Ave. Baltimore, MD 21230 Electromagnetic Compatibility InfiNet Malta LTD Cover Page InfiNet Wireless R5000-Smn CFR Title 47, Part 15B, 15.247; RSS-210, Issue 8, Dec. 2010 & ICES-003 MET Report: EMC39434B-FCC247 Rev. 1 © 2013, MET Laboratories, Inc. Page iii of xiv DOC-EMC702 6/18/2009 Electromagnetic Compatibility Criteria Test Report for the InfiNet Malta LTD InfiNet Wireless R5000-Smn Tested under the FCC Certification Rules contained in Title 47 of the CFR, Parts 15 Subpart B & ICES-003 for Class A Digital Devices & 15.247 Subpart C & RSS-210, Issue 8, Dec. 2010 for Intentional Radiators Surinder Singh, Project Engineer Jennifer Warnell Electromagnetic Compatibility Lab Documentation Department Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated, and the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements of the FCC Rules Parts 15B, 15.247 and Industry Canada standards ICES-003, Issue 5 August 2012, RSS-210, Issue 8, Dec. 2010 under normal use and maintenance. Asad Bajwa, Director, Electromagnetic Compatibility Lab Electromagnetic Compatibility InfiNet Malta LTD Report Status InfiNet Wireless R5000-Smn CFR Title 47, Part 15B, 15.247; RSS-210, Issue 8, Dec. 2010 & ICES-003 MET Report: EMC39434B-FCC247 Rev. 1 © 2013, MET Laboratories, Inc. Page iv of xiv DOC-EMC702 6/18/2009 Report Status Sheet Revision Report Date Reason for Revision  October 29, 2013 Initial Issue. 1 November 27, 2013 Revised to reflect engineer corrections. Electromagnetic Compatibility InfiNet Malta LTD Table of Contents InfiNet Wireless R5000-Smn CFR Title 47, Part 15B, 15.247; RSS-210, Issue 8, Dec. 2010 & ICES-003 MET Report: EMC39434B-FCC247 Rev. 1 © 2013, MET Laboratories, Inc. Page v of xiv DOC-EMC702 6/18/2009 Table of Contents I. Executive Summary .................................................................................................................................................1 A. Purpose of Test ...................................................................................................................................................2 B. Executive Summary ............................................................................................................................................2 II. Equipment Configuration .......................................................................................................................................3 A. Overview .............................................................................................................................................................4 B. References ...........................................................................................................................................................5 C. Test Site ..............................................................................................................................................................5 D. Description of Test Sample .................................................................................................................................5 E. Equipment Configuration ....................................................................................................................................7 F. Support Equipment .............................................................................................................................................7 G. Ports and Cabling Information ..…

Text truncated - open the document above for the full version.

Photograph 1. Conducted Emissions, Test Setup Photograph 2. Radiated Emissions, Test Setup, 30 MHz – 1 GHz Photograph 3. Radiated Emissions, Test Setup, 1 GHz – 2 GHz Photograph 4. Radiated Spurious Emissions, Test Setup, 30 MHz – 1 GHz Photograph 5. Radiated Spurious Emissions, Test Setup, 1 GHz – 18 GHz Photograph 6. Radiated Spurious Emissions, Test Setup, 18 GHz – 40 GHz