XBBMWB217-A6KHand Shoe Mouse

3. Instructions for optimal comfort A. Use of the HandShoe Mouse (see top image) 1. Sit as relaxed as possible and place your hand on the body of the mouse, so it acts like a saddle for the hand. 2. the mouse. 3. Finger tips may just very lightly touch the desktop. 4. Move the HandShoe Mouse in general by means of moving the forearm. 5. To operate within minute areas on the screen, one may of course move from the wrist. 6. Prevent holding the mouse like presented in the second picture on the left. When one holds the mouse like this, one will not at all experience the advantages of its ergonomic bio-design. B. Your position at your desk Take care that the height of your desk and chair are correct 1. Support your forearm by either your desk or the arm rest of your chair (see pictures 1 and 3) 2. Do not reach, do not allow your forearm to hover above the desk (see picture 4) 3. Let your upper arm hang in a comfortable position, alongside your body For your information, the average weight of an arm is around 7 kilograms. By allowing the arm to hover i.e. not to be supported by desk top and or arm rest, the muscles around the shoulder area have to be continuously active. This will most likely result in unnecessary muscle tension. The weight of hand and arm on the mouse will cause unnecessary friction on the desktop and C. The weight of the HandShoe Mouse The HandShoe Mouse has been weight compensated to allow optimal relaxation for your muscles, which are active when you move the mouse over the desk top. Although we recommend keeping the weights as they are, you may adapt the weight by removing chamber. See “Weight Change Options” on our website www.handshoemouse.com/tips.html. D. Size and The wireless HandShoe Mouse is available in 3 sizes, small, medium and large. The function of the third switch button is the same as the switch function of the scroll wheel. laptop by Microsoft®, Macintosh® by Apple® and Unix®. E. Warning Special mouse software already installed on your PC to enable the use of another type of mouse or tablet, may limit the performance of the HandShoe Mouse. If this is noted, please disable or remove this special software. F. End of life battery disposal instructions This computer mouse contains an internal, lithium-ion rechargeable battery that is replaceable. In general, the life expectancy of such batteries is dependent upon usage. Heavy daily use will result in shorter battery life. If you suspect that the lithium-ion rechargeable battery inside your mouse may be drained, it has a low charge, try recharging it. If the battery does not recharge after several attempts, it may be non operational. Should this be the case you need to replace your battery and you will need to dispose of the old battery in accordance with the laws and regulation in your area that specify the proper disposal of non-functioning batteries and/or electric devices. If there are no such laws or regulations, please dispose of your battery in a waste bin for spent electronic gear. G. Caution disassemble, expose to heat above 70º C (158º F), incinerate, or immerse in water or liquid of any kind. Do not use or charge the battery if it appeared to be leaking, discoloured, deformed, or in any other way abnormal. Do not leave your battery discharged or un-used for extended periods of time. When the battery is miss-used, it may explode or leak, causing burns and personal injury. If the battery leaks, use normal precaution and discard it immediately, following the laws and regulation governing battery disposal in your area. Remember that a leaking battery can cause skin burns or other personal injury. Keep this and all batteries out of the reach of children. H. Compliance Your product is FCC and CE compliant. I. Warranty Your product comes with a limited warranty. For more information refer to Hippus NV. Visit www.handshoemouse.com for more information. PLEASE READ THESE INSTRUCTIONS CAREFULLY! It is the only truly eronomic mouse, evidence based on research by several universities. The HandShoe Mouse is the only computer mouse that allows you to work with minimal muscle exertion. Feel the difference! 1. Contents of the box Your box contains the following items:  HandShoe Mouse  USB micro antenna  USB charger cable  These instructions  Quick guide  Protective pouch (to protect your HandShoe Mouse during transport). 2. Installation and charging instructions A. Installation of the wireless version of the HandShoe mouse The wireless HandShoe Mouse communicates with your computer by means of an RF signal in combination with a micro antenna. 1. Plug the micro antenna into an available USB port of your computer, keyboard or display 2. Press one of the operating switches of the HandShoe Mouse. 3. Check if contact is established:  the cursor should move when you move the mouse  the blue LED light must be showing on the bottom of the HandShoe Mouse 4. If the blue LED light is not on, the battery may be empty. Go to section C (Charging the Battery). 5. Set your cursor speed at medium (ref. mouse software on PC or laptop manual). For instructions how to set the cursor speed, watch the second video on www.handshoemouse.com/faq.html. If your cursor speed is too high, it may result in an unnecessary muscle tension to control the cursor movement. B. The rechargeable battery The HandShoe Mouse is equipped with a rechargeable lithium-ion battery. If the battery power runs low, a blue LED light will come on, visible via the scroll wheel. We advise to regularly charge the battery and not let it run down completely. When the battery power is low you can continue working, if you follow the instructions under section C (Charging the Battery). C. Charging the battery The battery is partly charged during production. The battery of the HandShoe Mouse can be (re)charged by means of the USB charger cable in your box. 1. To charge the battery, plug the USB-A plug (large) of the charger cable into an available USB port on your com…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT

Page 2 Page 3 Page 4 Page 5 Page 6

FCC ID: XBBMWB217-A6K Report No.: RF110928C25 Operational Description This device is a Mouse. The transmitter of the EUT is powered by 5Vdc from host equipment or 3.7Vdc from battery. The antenna is Copper trace antenna without antenna connector. For more detailed instruction, please take a look at the user’s manual.

Report No.: RF110928C25 1 Report Format Version 4.0.0 FCC TEST REPORT REPORT NO.: RF110928C25 MODEL NO.: LS2UL, LM2UL, LL2UL FCC ID: XBBMWB217-A6K RECEIVED: Sep. 28, 2011 TESTED: Oct. 5 ~ 6, 2011 ISSUED: Oct. 20, 2011 APPLICANT: Hippus NV ADDRESS: Parkstraat 35 NL-4818 SJ BREDA Netherlands ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) This test report consists of 32 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110928C25 2 Report Format Version 4.0.0 Table of Contents RELEASE CONTROL RECORD..............................................................................3 1. CERTIFICATION...........................................................................................4 2. SUMMARY OF TEST RESULTS...................................................................5 2.1 MEASUREMENT UNCERTAINTY................................................................5 3. GENERAL INFORMATION...........................................................................6 3.1 GENERAL DESCRIPTION OF EUT..............................................................6 3.2 DESCRIPTION OF TEST MODES................................................................7 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST...........................................8 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL:...............9 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS.............................11 3.4 DESCRIPTION OF SUPPORT UNITS........................................................11 4. TEST TYPES AND RESULTS.....................................................................12 4.1 CONDUCTED EMISSION MEASUREMENT..............................................12 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT............................12 4.1.2 TEST INSTRUMENTS................................................................................12 4.1.3 TEST PROCEDURES.................................................................................13 4.1.4 DEVIATION FROM TEST STANDARD.......................................................13 4.1.5 TEST SETUP..............................................................................................14 4.1.6 EUT OPERATING CONDITIONS................................................................14 4.1.7 TEST RESULTS..........................................................................................15 4.2 RADIATED EMISSION MEASUREMENT...................................................17 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT.................................17 4.2.2 TEST INSTRUMENTS................................................................................18 4.2.3 TEST PROCEDURES.................................................................................18 4.2.4 DEVIATION FROM TEST STANDARD.......................................................19 4.2.5 TEST SETUP..............................................................................................20 4.2.6 EUT OPERATING CONDITIONS................................................................20 4.2.7 TEST RESULTS..........................................................................................21 4.3 BAND EDGES MEASUREMENT................................................................27 4.3.1 LIMITS OF BAND EDGES MEASUREMENT.............................................27 4.3.2 TEST INSTRUMENTS................................................................................27 4.3.3 TEST PROCEDURE...................................................................................27 4.3.4 DEVIATION FROM TEST STANDARD.......................................................27 4.3.5 EUT OPERATING CONDITION..................................................................27 4.3.6 TEST RESULTS..........................................................................................27 5. PHOTOGRAPHS OF THE TEST CONFIGURATION..................................30 6. INFORMATION ON THE TESTING LABORATORIES................................31 7. APPENDIX A – MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB.......................................................32 Report No.: RF110928C25 3 Report Format Version 4.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF110928C25 Original release Oct. 20, 2011 Report No.: RF110928C25 4 Report Format Version 4.0.0 1. CERTIFICATION PRODUCT: Hand Shoe Mouse BRAND NAME: HandShoeMouse MODEL NO.: LS2UL, LM2UL, LL2UL APPLICANT: Hippus NV TESTED: Oct. 5 ~ 6, 2011 TEST ITEM: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.249) ANSI C63.4-2003 ANSI C63.10-2009 The above equipment (Model: LM2UL) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: ( Jessica Cheng / Specialist ) APPROVED BY : , DATE: ( Ken Liu / Manager ) Report No.: RF110928C25 5 Report Format Version 4.0.0 2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C (Section 15.249) STANDARD SECTION TEST TYPE AND LIMIT RESULT REMARK 15.207 Conducted Emission Test PASS Minimum passing margin is –5.93dB at 0.572MHz 15.209 15.249 15.249 (d) Radiated Emission Test Band Edge Measurement Limit: 5…

Text truncated - open the document above for the full version.

Report No.: RF110928C25 1 Report Format Version 4.0.0 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST – MODE A Report No.: RF110928C25 2 Report Format Version 4.0.0 RADIATED EMISSION TEST – MODE A Report No.: RF110928C25 3 Report Format Version 4.0.0 RADIATED EMISSION TEST – MODE B