XFIISPECIADAPMOD1iSPECI BLE Adapter

This document has to be archived according to ON 0‐10310 Template Version 4.0 (2015‐10‐31) Modification Ae 0 Ae 1 Ae 2 Ae 3 Ae 4 Ae 5 Ae 6 Prepared 2021-02-22 tamburwi KA No. 120390 120436 xxxxx Reviewed 2021-02-22 carriest KA Date 2021-05-29 2021-09-25 xx‐xx‐xx Norms chkd 2021-02-22 albertf1 Released xx-xx-xx hugenema iSPECI BLE Adapter Technical Information Remark Replaces / Mod. Basis Drawing No Pg. 14 Format A4 INVENTIO AG, CH‐6052 Hergiswil Classification 11950 Lead Office EU1 Q 50000606 Page 1 Lang. EN Copyright © 2021 INVENTIO AG All rights reserved. INVENTIO AG, Seestrasse 55, CH‐6052 Hergiswil, owns and retains all copyrights and other intellectual property rights in this document. Any reproduction, translation, copying or storing in data processing units in any form or by any means without prior permission of INVENTIO AG is regarded as infringement and will be prosecuted. Confidential This document contains confidential information that is proprietary to the Schindler Group. Neither this document nor the information contained therein shall be disclosed to third parties nor used for manufacturing without written consent of INVENTIO AG. Confidentiel Le présent document contient des informations confidentielles, dont la propriété appartient au groupe Schindler. Ni ce document, ni les informations contenues dans ce dernier ne doivent être divulguées à des tierces parties, ou utilisées à des fins de fabrication sans l'accord écrit de INVENTIO AG. Vertraulich Dieses Dokument enthält vertrauliche Informationen, die geistiges Eigentum der Schindler ‐ Gruppe sind. Die in diesem Dokument enthaltenen Informationen dürfen ohne schriftliches Einverständnis der INVENTIO AG weder Dritten gegenüber offengelegt noch für die Fertigung verwendet werden. 保密文件 本文件含有迅达集 团的专有保密信息。 未 经 INVENTIO AG 的 书面同意，本文件及其所含 信息不得向任何第三方披露，亦不得用于生产目的。 Contents 1 INTRODUCTION ............................................................................................................................... 2 2 OVERVIEW ....................................................................................................................................... 2 3 HOW TO USE THE ADAPTER ......................................................................................................... 3 4 CHARGE THE BATTERY ................................................................................................................. 3 5 MECHANICAL DIMENSIONS ........................................................................................................... 3 6 BLE APP. PROGRAMMING INTERFACE USER`S COMMANDS ................................................... 4 6.1 Com Setting Config ..................................................................................................................... 6 6.2 Device Control Parameters .......................................................................................................... 8 7 CONNECTORS ON THE ADAPTER ................................................................................................ 9 8 PAPER TO BE DELIVERED WITH THE ADAPTER ....................................................................... 10 9 ENVIRONMENTAL CONDITIONS .................................................................................................. 11 10 ENVIRONMENTAL PROTECTION REQUIREMENTS ................................................................ 11 11 SUPPLIER / MANUFACTURER OBLIGATIONS ......................................................................... 11 11.1 Compliances .......................................................................................................................... 13 11.2 Federal Communications Commission Interference Statement ............................................ 13 11.3 Testing and Final Setup ......................................................................................................... 14 The original version of this document is in English. In case of discrepancy between a translation of this document and the English version, the English version must be used as a reference INVENTIO AG, CH‐6052 Hergiswil iSPECI BLE Adapter Technical Information KA No. xxxxx KA Date xx-xx-xx Ae 2 Q 50000606 Page 2 Format A4 Lang. EN Copyright © 2021 INVENTIO AG Confidential This document contains confidential information that is proprietary to the Schindler Group. Neither this document nor the information contained therein shall be disclosed to third parties nor used for manufacturing without written consent of INVENTIO AG. Confidentiel Le présent document contient des informations confidentielles, dont la propriété appartient au groupe Schindler. Ni ce document, ni les informations contenues dans ce dernier ne doivent être divulguées à des tierces parties, ou utilisées à des fins de fabrication sans l'accord écrit de INVENTIO AG. Vertraulich Dieses Dokument enthält vertrauliche Informationen, die geistiges Eigentum der Schindler ‐ Gruppe sind. Die in diesem Dokument enthaltenen Informationen dürfen ohne schriftliches Einverständnis der INVENTIO AG weder Dritten gegenüber offengelegt noch für die Fertigung verwendet werden. 保密文件 本文件含有迅达集 团的专有保密信息。 未 经 INVENTIO AG 的 书面同意，本文件及其所含 信息不得向任何第三方披露，亦不得用于生产目的。 1 Introduction iSPECI BLE adapter is a device that allows you to connect the elevator controllers, by the means of a “RS232/RS422 – Bluetooth Low Energy (BLE) interface” to the mobile device / iSPECI of the field technicians. The iSPECI BLE adapter has been developed to radically simplify connecting to elevator controllers using the iSPECI application. No more cables that can break, no additional adapters to turn communication pins, it is a plug & play device. It is a Bluetooth BLE device with an approximate range of 10 meters. 2 Overview The adapter contains the following:  Bluetooth (BLE) interface 5.2 (see EFR32BG22 from Silicon Labs)  RS232 interface with connector DB9 female  RS422/485 interface with connector DB9 male  Micro U…

Text truncated - open the document above for the full version.

2021/1/27 Federal Communications Commission Authorization and Evaluation Division ATTESTATION FCC ID: XFIISPECIADAPMOD1 Product: iSPECI BLE Adapter Model: 1.0, 1.x ( where x depends on the FW version) We don’t provide any controls or software to allow operation outside the USA frequency band when we sell a product bearing the FCC ID: XFIISPECIADAPMOD1 anywhere in the world. Sincerely, ------------------------------------------------------------ Martin Hugener / Lead Connectivity & Alarming Schindler Elevator Ltd. Zugerstrasse 13 6030 Ebikon, Switzerland Tel: +41414454953 Email: [email protected]

FCC ID.: XFIISPECIADAPMOD1 Date: January 27, 2021 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: Type of Confidentiality Requested Exhibit ☒ Permanent Block Diagrams ☒ Short Term External Photos ☒ Short Term Internal Photos ☒ Permanent Operation Description/Theory of Operation ☒ Permanent Schematics ☒ Short Term Test Setup Photos ☒ Short Term User’s Manual The above materials contain trade secrets and proprietary information not customarily Released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Sincerely, ------------------------------------------------------ Name: Martin Hugener Dept: Global SW and Connectivity Solutions Company name: Schindler Elevator Ltd. Zugerstrasse 13 6030 Ebikon, Switzerland

Declaration of Authorization We Name: Schindler Elevator Ltd. Address: Zugerstrasse 13 City: Ebikon Country: Switzerland Declare that: Name Representative of agent: Vincent Lin Agent Company name: DEKRA Testing and Certification Co., Ltd. Address: No.5-22, Ruishukeng, Linkou Dist., City: New Taipei City 24451, Country: Taiwan, R.O.C. is authorized to apply for Certification of the following product(s): Product Name: iSPECI BLE Adapter Model: 1.0, 1.x ( where x depends on the FW version) FCC ID: XFIISPECIADAPMOD1 Trademark: Schindler on our behalf. This is valid until January 26, 2022, or until FCC certification are completed, whichever comes sooner. Date: January 27, 2021 City: Ebikon Name: Martin Hugener Dept: Global SW and Connectivity Solutions Signature:

Declaration on model difference Date: 2021.01.27 FCC ID: XFIISPECIADAPMOD1 Dear Sir, We, Schindler Elevator Ltd., hereby declare that our products have the following differences between all numbers. Model 1.0 1.x ( where x depends on the FW version) Product Name iSPECI BLE Adapter Trade Name Schindler Notes 1.x (where x means same HW, new FW but with NO changes on RF parameters). Sincerely, Martin Hugener / Global SW and Connectivity Solutions Company name: Schindler Elevator Ltd. Zugerstrasse 13 6030 Ebikon, Switzerland

Report No.: 2061050R-E3032110111 Page : 1 of 3 Attachment 2 : EUT Detailed Photographs (1) EUT Photo (2) EUT Photo Report No.: 2061050R-E3032110111 Page : 2 of 3 (3) EUT Photo (4) EUT Photo Report No.: 2061050R-E3032110111 Page : 3 of 3 (5) EUT Photo (6) EUT Photo

Schindler elevators Ltd. FCC ID: XFIISPECIADAPMOD1 Zugerstrasse 13 Ebikon 6030 Switzerland TEL: +41917569612 FCC ID Label

Schindler elevators Ltd. FCC ID: XFIISPECIADAPMOD1 Zugerstrasse 13 Ebikon 6030 Switzerland TEL: +41917569612 The FCC ID will be placed on the equipment as shown in the photograph below.

Report No.: 2061050R-E3032110111 Page : 1 of 5 Attachment 2 : EUT Detailed Photographs (1) EUT Photo (2) EUT Photo Report No.: 2061050R-E3032110111 Page : 2 of 5 (3) EUT Photo (4) EUT Photo Report No.: 2061050R-E3032110111 Page : 3 of 5 (5) EUT Photo (6) EUT Photo Report No.: 2061050R-E3032110111 Page : 4 of 5 (7) EUT Photo (8) EUT Photo RF Chip Antenna Report No.: 2061050R-E3032110111 Page : 5 of 5 (9) EUT Photo (10) EUT Photo

Report No.: 2061050R-E3082100014 Page: 1 of 5 RF Exposure Evaluation Report Product Name : iSPECI BLE Adapter Model No. : 1.0, 1.x ( where x depends on the FW version) FCC ID : XFIISPECIADAPMOD1 Applicant : Schindler elevators Ltd. Address : Zugerstrasse 13 Ebikon 6030 Switzerland Date of Receipt : Jun. 24, 2020 Date of Declaration : Nov. 23, 2020 Report No. : 2061050R-E3082100014 Report Version : V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. Measurement uncertainties evaluated for each testing system and associated connections are given here to provide the system information for reference. Compliance determinations do not take into account measurement uncertainties for each testing system, but are based on the results of the compliance measurement. Report No.: 2061050R-E3082100014 Page: 2 of 5 Issued Date: Nov. 23, 2020 Report No.: 2061050R-E3082100014 Product Name iSPECI BLE Adapter Applicant Schindler elevators Ltd. Address Zugerstrasse 13 Ebikon 6030 Switzerland Manufacturer UConnect International Co.,Ltd. Model No. 1.0, 1.x ( where x depends on the FW version) FCC ID. XFIISPECIADAPMOD1 Trade Name Schindler Applicable Standard KDB 447498 D01 v06 Minimum test separation distance ≥ 20 cm For low power devices Test Result Complied Documented By : ( Senior Adm. Specialist / Joanne Lin ) Tested By : ( Senior Engineer / Wen Lee ) Approved By : ( Director / Vincent Lin ) Report No.: 2061050R-E3082100014 Page: 3 of 5 Revision History Report No. Ve r s i o n Description Issued Date 2061050R-E3082100014 V1.0 Initial issue of report. 2020-11-23 Report No.: 2061050R-E3082100014 Page: 4 of 5 1. GENERAL INFORMATION 1.1. EUT Description Product Name iSPECI BLE Adapter Trade Name Schindler Model No. 1.0, 1.x ( where x depends on the FW version) FCC ID. XFIISPECIADAPMOD1 Frequency Range 2402-2480MHz Channel Number Bluetooth V5.2: 40CH Type of Modulation Bluetooth V5.2: GFSK (1Mbps) Antenna Type Chip Antenna Antenna Gain Refer to the table “Antenna List” Antenna List No. Manufacturer Part No. Antenna Type Peak Gain 1 TOPGAIN CH2G4-6022-000D1-01 Chip Antenna 2.3dBi for 2.4 GHz Report No.: 2061050R-E3082100014 Page: 5 of 5 2. RF Exposure Evaluation 2.1. Standard Applicable According to 1.1307 (b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. 2.2. Measurement Result: According to KDB Publication 447498 D01, section 4.3.1, per the calculations of item 1 (Power(mW)/separation (mm)*sqrt(f(GHz)≤3.0), SAR is required as shown in the table below where calculated values are greater than 3.0: Operation frequency = 2450MHz and antenna separation distance = 5mm Body SAR Test Exclusion Threshold = 10mW Frequency Band (MHz) Maximum peak output power Peak Gain: 2.3dBi SAR Test Exclusion Threshold Calculated Threshold Value (≦3.0 SAR is not required) conducted EIRP EIRP (mW) (dBm) (dBm) (mW) 2480 -16.60 -14.74 0.04 19 0.012 Note1: The SAR/MPE measurement is not necessary. Note2: The maximum peak output power is refer to report No.: 2061050R-E3032110111 from the DEKRA.

Report No.: 2061050R-E3032110111 Page: 1 of 51 FCC Test Report Product Name iSPECI BLE Adapter Model No. 1.0, 1.x ( where x depends on the FW version) FCC ID. XFIISPECIADAPMOD1 Applicant Schindler elevators Ltd. Address Zugerstrasse 13 Ebikon 6030 Switzerland Date of Receipt Jun. 24, 2020 Issued Date Nov. 10, 2020 Report No. 2061050R-E3032110111 Report Version V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. Measurement uncertainties evaluated for each testing system and associated connections are given here to provide the system information for reference. Compliance determinations do not take into account measurement uncertainties for each testing system, but are based on the results of the compliance measurement. Report No.: 2061050R-E3032110111 Page: 2 of 51 Test Report Issued Date: Nov. 10, 2020 Report No.: 2061050R-E3032110111 Product Name iSPECI BLE Adapter Applicant Schindler elevators Ltd. Address Zugerstrasse 13 Ebikon 6030 Switzerland Manufacturer UConnect International Co.,Ltd. Model No. 1.0, 1.x ( where x depends on the FW version) FCC ID. XFIISPECIADAPMOD1 EUT Rated Voltage DC 5V (Power by USB) or DC 3.7V (Power by Battery) EUT Test Voltage DC 5V (Power by USB) Trade Name Schindler Applicable Standard FCC CFR Title 47 Part 15 Subpart C ANSI C63.4: 2014, ANSI C63.10: 2013 Test Result Complied Documented By : ( Senior Adm. Specialist / Joanne Lin ) Tested By : ( Senior Engineer / Ivan Chuang ) Approved By : ( Director / Vincent Lin ) Report No.: 2061050R-E3032110111 Page: 3 of 51 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION ............................................................................................................... 5 1.1. EUT Description ...................................................................................................................................... 5 1.2. Tested System Details .............................................................................................................................. 7 1.3. Configuration of Tested System .............................................................................................................. 7 1.4. EUT Exercise Software ........................................................................................................................... 7 1.5. Test Facility ............................................................................................................................................. 8 1.6. List of Test Equipment ............................................................................................................................. 9 1.7. Uncertainty ............................................................................................................................................ 10 1.8. Summary of Test Results ....................................................................................................................... 11 2. CONDUCTED EMISSION ................................................................................................................ 12 2.1. Test Setup .............................................................................................................................................. 12 2.2. Limits ..................................................................................................................................................... 12 2.3. Test Procedure ....................................................................................................................................... 13 2.4. Test Result of Conducted Emission ....................................................................................................... 14 3. PEAK POWER OUTPUT .................................................................................................................. 16 3.1. Test Setup .............................................................................................................................................. 16 3.2. Limit ...................................................................................................................................................... 16 3.3. Test Procedure ....................................................................................................................................... 16 3.4. Test Result of Peak Power Output ......................................................................................................... 17 4. RADIATED EMISSION ..................................................................................................................... 18 4.1. Test Setup .............................................................................................................................................. 18 4.2. Limits ..................................................................................................................................................... 19 4.3. Test Procedure ....................................................................................................................................... 20 4.4. Test Result of Radiated Emission .......................................................................................................... 22 5. RF ANTENNA CONDUCTED TEST ................................................................................................ 30 5.1. Test Setup .............................................................................................................................................. 30 5.2. Limits ..................................…

Text truncated - open the document above for the full version.

Report No.: 2061050R-E3032110111 Page : 1 of 3 Attachment 1: EUT Test Setup Photographs Front View of Conducted Test Back View of Conducted Test Report No.: 2061050R-E3032110111 Page : 2 of 3 Front View of Radiated Test Back View of Radiated Test Report No.: 2061050R-E3032110111 Page : 3 of 3 Front View of Radiated Test (Horn) Back View of Radiated Test (Horn)