XFT-TELO107OOMA TELO LTE 2

Proprietary and confidential. Ooma Telo LTE 2 User Guide TELO107 Proprietary and confidential. Table of Contents 1. Package Contents 2. Account Activation 3. Assembly 4. Placement 5. Connection and Use 6. Mounting 7. Troubleshooting 8. Specifications 9. Support Proprietary and confidential. Package Contents •OomaTeloLTE Device •Power Cable •RJ-11 Cable •Mounting Bracket •Mounting Screws and Anchors Proprietary and confidential. Account Activation Your TeloLTE 2 device may be pre-activated if purchased through an authorized Oomadealer. If the TeloLTE 2 device is not yet activated, go to ooma.com/activate Proprietary and confidential. Assembly 1. Attach the included AC power adapter to the TeloLTE 2 unit and plug the other end to a wall outlet. 2. Connect an analog phone, such as a cordless phone base, to the TeloLTE 2 using the included RJ-11 analog phone cord. 3. Turn the power switch to the On position. Illustration of power cord and analog phone connected to the TeloLTE Proprietary and confidential. Placement Your TeloLTE 2 must be located in an area with suitable LTE cellular coverage. To test coverage, use the signal strength indicator LEDs on the front TeloLTE 2 unit. If the signal indicator shows two bars or fewer, try moving the unit to a different location within the room, or to a different room. The TeloLTE 2 unit should be placed in or near a window, on the highest floor possible in your building, and not near metal objects, concrete, or plumbing. Ideal placement for the device: •In or near a window •On the highest floor possible in your building –avoid basements •NOT near large metal objects •NOT near large amounts of concrete, steel, electrical cabling, sheet metal, wire mesh, or plumbing Proprietary and confidential. Connection and Use When your TeloLTE 2 is powered on and ready for use, the left-most LED will appear solid blue. To test a phone connected to TeloLTE 2, go off- hook and listen for a dial tone. For more information on using the features of OomaTeloLTE 2, visit support.ooma.com/home LED display on TeloLTE 2 Device Illustration of solid blue light on the left front LED of device. Proprietary and confidential. Mounting The TeloLTE 2 device can sit flat on a horizontal surface, such as a windowsill, or it can be mounted vertically on a wall. To mount on a wall, use the included mounting bracket. Attach the bracket to the wall, using the included plastic wall anchors if necessary. Slide the TeloLTE 2 device onto the mounting bracket from the top. Route the cables through the included cable management slots on the mounting bracket. Rendering of bracket, at the same angle as the device, as if they’re mating. Proprietary and confidential. Troubleshooting (To be determined based on beta testing) Proprietary and confidential. Support Need help? Ooma has a wealth of available resources to help if you need assistance. •Support Articles and User Manuals. Access our comprehensive knowledge base at support.ooma.com/home •Live Customer Care. Speak with a support specialist at 1-866-939-6662 (US). Proprietary and confidential. Specifications •Dual-core ARM Cortex A55 CPUProcessor •QuectelEC25-AFXD •Cat-4 LTE •Support for bands B2/B4/B5/B12/B13/B14/B66/B71 Modem •Two Quectel FPC antennas, both internal •Custom main antenna from Quectel •Quectel YF0020EA as diversity antenna Antennas •One micro-SIM and one eSIMSIMs •Single RJ-11 analog FXS port •50Vrms Low Power Ringing; 25mA Loop-current •Test and diagnostic functions for local loop monitoring according to GR-909 •Dect6.0 support •Up to 4 Dectphones Telephony •USB Type-C power input •External AC/DC USB-C PD power supply •Input 100-240 VAC 50-60Hz; USB-C output options: 5VDC/3A, 9VDC/2A, 12VDC/1.5A •5VDC/3A output option used by the device •Integrated UPS (Uninterruptible Power Supply) Power •Battery pack 1S2P Li-ion battery: 3.6V, 4A •Capacity 5200 mAh; provides > 15 hours of standby time (to be confirmed with final SW) Battery Backup •Master On/Off •DectPairing •Factory reset (recessed) Switches FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. ISED Warning This device contains licence-exempt transmitter(s)/receiver(s) that complywith Innovation, Science and Economic Development Canada's licence-exempt RsS(s). Operation is subject to the following two conditions: 1. This device may not ca…

Text truncated - open the document above for the full version.

Ooma, Inc. 2.911 (d)(7)USA Agent v1.5 Section 2.911(d)(7) USA Agent for Service of Process Company Name: Ooma, Inc. Address: 525 Almanor Ave #200, Sunnyvale, CA 94085 USA Product Name: Receiver Module (FCC ID: XFT-TELO107) Model(s): TELO107 FRN: 0027355262 2.911(d)(7) USA Designated Agent for Service of Process We, [Ooma, Inc.] (“the applicant”) designate [Ooma, Inc.] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Ooma, Inc. Address: 525 Almanor Ave #200, Sunnyvale, CA 94085 USA Grantee FRN Number: 0027355262 FCC Grantee Code: XFT Contact Name: Todd Krein Telephone No: 650 566 6657 Email: [email protected] Applicant Company name: Ooma, Inc. Address: 525 Almanor Ave #200, Sunnyvale, CA 94085 USA Grantee FRN Number: 0027355262 FCC Grantee Code: XFT Contact Name: Todd Krein Telephone No: 650 566 6657 Email: [email protected] Signature: Signature: Ooma, Inc. 2.911 (d)(7)USA Agent v1.5 Title:Director of Architecture Title:Director of Architecture Date: 2025.12.20 Date: 2025.12.20 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Ooma, Inc. 2025-12-20 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for(FCC ID: XFT-TELO107) [Ooma, Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, Signature: Date: 2025.12.15 Name: Jiankuai Li Title: PM Company: Shenzhen STS Test Services Co., Ltd. Ooma, Inc. 2025-12-20 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID: XFT-TELO107) [Ooma, Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature: Date: 2025.12.15 Name: Jiankuai Li Title: PM Company: Shenzhen STS Test Services Co., Ltd.

2025.12.20 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize SHENZHEN STS TEST SERVICES CO.,LTD./ 101, Building B, Zhuoke Science Park, No.190 Chongging Road, ZhanChengShequ, Fuhai Sub-District, Baoan District, Shenzhen, Guangdong, China /Jiankuai Li(Name of Agent company name and address, Name of Agent) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. Name: Jiankuai Li Title: PM E-mail:[email protected] This appointment is valid until further until December 31, 2026 Sincerely, Signature: Name: Todd Krein Title: Director of Architecture E-mail: [email protected] Company: Ooma, Inc.

Ooma, Inc. 2025-12-20 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (OOMA TELO LTE 2 / TELO107 / FCC ID: XFT-TELO107) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the •Schematics •Block diagram •Operation description required to be submitted with this application be permanently withheld from public review. These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Please contact me if there is any information you may need. Sincerely, Jiankuai Li

Page 1 of 4 Report No.: STS2505098 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model: TELO107 Photo 1 Photo 2 Page 2 of 4 Report No.: STS2505098 Photo 3 Photo 4 Page 3 of 4 Report No.: STS2505098 Photo 5 Photo 6 Page 4 of 4 Report No.: STS2505098 Photo 7 Photo 8

5 VDC 3 A M ODEL: OOMA TELO LTE 2 FCC ID: XFT-TELO107 IC: 9769A-TELO107 Co ntains FCC ID: XMR202008EC25AFXD Contains IC: 10224A-022EC25AFXD Contains FCC ID: XMR2023HCM111Z Contains IC: 10224A-2023HCM111Z Ooma TELO LTE 2 ® ooma.com Made in Vietnam Activation Code 25ED12A IMEI: XXXXXXXXXXXXXXXX SN: XXXXXXXXXXXX PN: XXX-XXXX-XXX REV:XXX QR Placeholder EID: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Label Location

Page 1 of 7 Report No.: STS2505098 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model: TELO107 Photo 1 Photo 2 Page 2 of 7 Report No.: STS2505098 Photo 3 Photo 4 4G Antenna 4G Antenna Page 3 of 7 Report No.: STS2505098 Photo 5 Photo 6 Page 4 of 7 Report No.: STS2505098 Photo 7 Photo 8 DECT ANT Page 5 of 7 Report No.: STS2505098 Photo 9 Photo 10 BT ANT Page 6 of 7 Report No.: STS2505098 Photo 11 Photo 12 Page 7 of 7 Report No.: STS2505098 Photo 13 Photo 14

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. MPE Report Report No.: STS2505098H01 Issued for Ooma, Inc. 525 Almanor Ave #200, Sunnyvale, CA 94085 USA Product Name: OOMA TELO LTE 2 Brand Name: OOMA Model Name: TELO107 Series Model(s): N/A FCC ID: XFT-TELO107 Test Standards: FCC 47CFR §2.1091 Page 2 of 10 Report No.: STS2505098H01 TEST REPORT Applicant’s Name ................. : Ooma, Inc. Address .................................. : 525 Almanor Ave #200, Sunnyvale, CA 94085 USA Manufacturer's Name .......... : Ooma, Inc. Address .................................. : 525 Almanor Ave #200, Sunnyvale, CA 94085 USA Product Description Product Name ........................ : OOMA TELO LTE 2 Brand ................................... : OOMA Model Number ....................... : ... : TELO107 Series Model(s) ...................... : N/A Standards ............................. : FCC 47CFR §2.1091 447498 D04 Interim General RF Exposure Guidance v01 The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ............................................ : Date of receipt of test item ...................... : 16 May 2025 Date (s) of performance of tests.............. : 16 May 2025~18 June 2025 Date of Issue ........................................... : 18 June 2025 Test Result ............................................... : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 10 Report No.: STS2505098H01 TABLE OF CONTENTS 1. GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF THE EUT 5 1.2 TEST FACTORY 6 2. FCC 47CFR §2.1091 REQUIREMENT 7 2.1 TEST STANDARDS 7 2.2 LIMIT 7 2.3 TEST RESULT 10 Page 4 of 10 Report No.: STS2505098H01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 18 June 2025 STS2505098H01 ALL Initial Issue Page 5 of 10 Report No.: STS2505098H01 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name OOMA TELO LTE 2 Brand OOMA Model Name TELO107 Series Model(s) N/A Model Difference N/A Product Description The EUT is OOMA TELO LTE 2 Operation Frequency: DECT: 1921.536-1928.448MHz BLE: 2402~2480 MHz TX： WCDMA B2: 1850-1910 MHz WCDMA B4: 1710-1755 MHz WCDMA B5: 824-849 MHz LTE Band 2:1850~1910MHz LTE Band 4:1710~1755MHz LTE Band 5:824~849MHz LTE Band 12:699~716MHz LTE Band 13:777~787MHz LTE Band 14:788~798MHz LTE Band 66:1710~1780MHz LTE Band 71:663~698MHz RX: WCDMA B2: 1930-1990 MHz WCDMA B4: 2110-2155 MHz WCDMA B5: 869-894 MHz LTE Band 2:1930 ~1990MHz LTE Band 4:2110~2155MHz LTE Band 5:869~894MHz LTE Band 12:729~746MHz LTE Band 13:746~756MHz LTE Band 14:758~768MHz LTE Band 66:2110~2200MHz LTE Band 71:617~652MHz Modulation Type: DECT: GFSK BLE: GFSK WCDMA: QPSK; HSDPA:QPSK/16QAM; HSUPA:BPSK LTE: QPSK/16QAM Antenna gain: 3.5dBi Antenna Designation: PCB Power Rating Inpu: 5V dc, 3A Adapter Input: 100-240Vac, 50/60Hz Output: 5Vdc, 3A or 9Vdc, 2A or 12Vdc, 1.5A Battery Rated Voltage: 3.6 V Charge Limit Voltage: 4.2V Page 6 of 10 Report No.: STS2505098H01 Capacity:5200mAh Hardware Version N/A Software Version N/A 1.2 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 Page 7 of 10 Report No.: STS2505098H01 2. FCC 47CFR §2.1091 REQUIREMENT 2.1 TEST STANDARDS Follow the maximum permissible exposure (MPE) limits specified in 447498 D04 Interim General Radio Frequency Exposure Guidelines v01. The gain of the antenna used in the product was extracted from the supplied antenna data sheet and the maximum total power input to the antenna was also measured. Calculate the distance from the product to the MPE limit by the formula. 2.2 LIMIT For single RF sources (i.e., any single fixed RF source, mobile device, or portable device, as defined in paragraph (b)(2) of this section): A single RF source is exempt if: (A) The available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption may not be used in conjunction with other exemption criteria other than those in paragraph (b)(3)(ii)(A) of Part 1.1307. Medical implant devices may only use this exemption and that in paragraph (b)(3)(ii)(A); (B) Or the available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold Pth (mW) described in the following formula. This method shall only be used at separation distances (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by: Page 8 of 10 Report No.: STS2505098H01 (C) Or using below table and the minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the calculated value prescribed for that frequency. For the exemption in Table 1 to apply, R must be at least λ/2π, where λ is the free-space operating wavelength in meters. If the ERP of a single RF source is not easily obtained, then the available maximum time-averaged power may be used in lieu of ERP if the physical dimensions of the radiating structure(s) do not exceed the electrical length of λ/4 or if the antenna gain is less than that of a half-wave dipole (1.64 linear value). RF Source frequency (MHz) Threshold ERP(watts) 0.3-1.34 1,920 R 2 . 1.34-30 3,450 R 2 /f 2 . 30-300 3.83 R 2 . 300-1,500 0.0128 R 2 f. 1,500-100,000 19.2R 2 . Page 9 of 10 Report No.: STS2505098H01 For multiple RF sources: Multiple RF sources are exempt if: (A)…

Text truncated - open the document above for the full version.

PCB inverted-F Antenna for DECT Manufacturer: Ooma inc. Manufacturer Address: 525 Almanor Ave #200, Sunnyvale, CA 94085 Model Number: PCB-0116-100 Max Antenna Gain in DECT Frequency Band: 3.5dBi 2D Image Antenna diagram Azimuth = -106.4 Elevation= -58.1 Roll e 11.J -10 -11 -14 -16 I0tal l"0wtr 10 11 Total Pwo er Azimuth = 1151 Elevation- --61.a Rotl = -5&.1

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.: STS2505098W01 Issued for Ooma, Inc. 525 Almanor Ave #200, Sunnyvale, CA 94085 USA Product Name: OOMA TELO LTE 2 Brand Name: OOMA Model No.: TELO107 Series Model(s): N/A FCC ID: XFT-TELO107 Test Standards: Title 47 of the CFR, Part 15 Subpart D Page 2 of 82 Report No.: STS2505098W01 TEST RESULT Applicant’s Name ................. : Ooma, Inc. Address .................................. : 525 Almanor Ave #200, Sunnyvale, CA 94085 USA Manufacturer's Name ........... : Ooma, Inc. Address .................................. : 525 Almanor Ave #200, Sunnyvale, CA 94085 USA Product Description Product Name ........................ : OOMA TELO LTE 2 Brand Name ......................... : OOMA Model No. ............................... : TELO107 Series Model(s) ...................... : N/A Test Standards ..................... : Title 47 of the CFR, Part 15. Subpart D Test procedure ........................ : ANSI C63.17-2020 This device described above has been tested by STS and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be repro- duced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ..................... : 16 May 2025 Date of performance of tests .................. : 16 May 2025~18 June 2025 Date of Issue .......................................... : 18 June 2025 Test Result .............................................. : Pass Testing Engineer : (Lenon Hou) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 82 Report No.: STS2505098W01 TABLE OF CONTENTS Page 1 INTRODUCTION 7
1.1 TEST FACTORY 7
1.2 MEASUREMENT UNCERTAINTY 7
2 PRODUCT INFORMATION 8
3 TEST CONFIGURATION OF EQUIPMENT UNDER TEST 9
3.1 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 9
3.2 SYSTEM TEST CONFIGURATION 10
4 MEASUREMENT INSTRUMENTS 11
5 TEST ITEMS 12
5.1 ANTENNA REQUIREMENT 12
5.2 MODULATION TECHNIQUES 12
5.3 EMISSION BANDWIDTH 13
5.4 PEAK TRANSMIT POWER 17
5.5 POWER SPECTRAL DENSITY 21
5.6 POWER ADJUSTMENT FOR ANTENNA GAIN 25
5.7 AUTOMATICALLY DISCONTINUE TRANSMISSION 26
5.8 SYSTEM ACKNOWLEDGE-MENT TEST 27
5.9 MONITORING THRESHOLD 28
5.10 DURATION OF TRANSMISSION 29
5.11 SELECTED CHANNEL CONFIRMATION, POWER ACCURACY, SEGMENT OCCUPANCY 31
5.12 RANDOM WAITING 33
5.13 MONITORING REQUIREMENTS 34
5.14 MONITORING ANTENNA 35
5.15 DUPLEX CONNECTIONS 35
5.16 ALTERNATIVE MONITORING INTERVAL FOR CO-LOCATED DEVICES 36
5.17 FAIR ACCESS 36
5.18 SPURIOUS EMISSIONS 37
5.19 FRAME PERIOD 53
5.20 FREQUENCY STABILITY 55
5.21 CONDUCTED EMISSION MEASUREMENT 58
5.22 RADIATED SPURIOUS EMISSION 62
Page 4 of 82 Report No.: STS2505098W01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 18 June 2025 STS2505098W01 ALL Initial Issue Page 5 of 82 Report No.: STS2505098W01 SUMMARY OF TEST RESULTS Test procedures according to the technical standards: The following tests were conducted on a sample of the equipment for the purpose of demonstrating com- pliance with Part 15 Subpart D. Requirement FCC Part Test ProcedureResult Emission Bandwidth 15.323 (a) 6.1.3 Compliant Labeling Requirements 15.19(a)(3) -- Compliant Conducted Emissions 15.315 & 15.207 ANSI C63.4 Not Applicable Antenna Requirements 15.317 & 15.203 Declaration Compliant Use digital modulation 15.319 (b) 6.1.4 Compliant Peak transmit power 15.319 (c) 6.1.2 Compliant Power spectral density 15.319 (d) 6.1.5 Compliant Power adjustment for an- tenna gain 15.319 (e) 4.3.1 Compliant Automatically dis- continue transmis- sion 15.319 (f) -- Compliant Spurious emissions conducted 15.323 (d) (1) & 15.323 (d) (2) 6.1.6 Compliant RF Exposure 15.319 (i) & 1.1307(b), 2.1091 and 2.1093 ANSI/IEEE C95.1 Compliant (The test data please re- fer to RF exposure report) Monitoring time 15.323 (c)(1) 7.3.4 Compliant Monitoring thresh- old 15.323 (c)(2) 7.3 Compliant Duration of transmission 15.323 (c)(3) 8.2.2 Not Applicable System acknowledgment test 15.323(c)(4) 8.2.1 Compliant Channel confirmation, Power accuracy, Segment occupancy 15.323 (c)(5) 7.3.3 & 7.3.4 Compliant Random waiting 15.323 (c)(6) 8.1.3 Not Applicable Monitoring bandwidth 15.323 (c)(7) 7.4 Compliant Monitoring reaction time 15.323 (c)(1 ) 7.5 Compliant Monitoring antenna 15.323 (c)(8) 4 Compliant Page 6 of 82 Report No.: STS2505098W01 Monitoring thresh- old relaxation 15.323 (c)(9) 4 Compliant Duplex connections 15.323 (c)(10) 8.3 Not Applicable Alternate monitoring interval 15.323 (c)(11) 8.4 Not Applicable Fair access 15.323 (c)(12) Declaration Not Applicable Frame period 15.323 (e) 6.2.2 & 6.2.3 Compliant Frequency stability 15.323 (f) 6.2.1 Compliant Radiated Out of Band Emissions 15.319 (g), 15.309 (b) & FCC Part 15 Subpart B, 15.109 and 15.209 -- Compliant Page 7 of 82 Report No.: STS2505098W01 1 INTRODUCTION 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a stand- ard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.755dB 2 Unwanted Emissions, conducted ±2.874dB 3 All emissions, radiated 30-1GHz…

Text truncated - open the document above for the full version.

Page 1 of 2 FCC ID: XFT-TELO107 Test Setup Photo Conduction RE (Below 1GHz) Page 2 of 2 FCC ID: XFT-TELO107 RE (Above 1GHz)