XGB-CWBB0046Wireless Controller

Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 9, 2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: XGB-CWBB0046 [Voyetra Turtle Beach, Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Voyetra Turtle Beach, Inc.] (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) Carol Wang (Applicant printed name) Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 9, 2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: XGB-CWBB0046 [Voyetra Turtle Beach, Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) Carol Wang (Applicant printed name)

U.S. Agent Designation for Service of Process - Certification Attestation Letter 09 /09 /2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref:Attestation Statements Part 2.911(d)(7) Filing FCC ID: XGB-CWBB0046 Applicant FRN: [0018834572] [Voyetra Turtle Beach, Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, [Voyetra Turtle Beach, Inc.] is our designated U.S. agent for service of process for the above referenced FCC ID. [Voyetra Turtle Beach, Inc.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. [Voyetra Turtle Beach, Inc.] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Voyetra Turtle Beach, Inc. FCC Registration Number (FRN): 0018834572 Physical U.S. Company Address: 15822 BERNARDO CENTER DRIVE, SUITE 105, SAN DIEGO, CA 92127 USA ContactPhone: (914)345-225 Contact Person: Joe Stachula Agent Email Address: [email protected] Sincerely, Company: [Voyetra Turtle Beach, Inc.] Company Representative: [Carol Wang] Title: Sr. Manager, Regulatory Compliance Signature: Designated Agent: [Voyetra Turtle Beach, Inc.] Designated Agent Representative: [Carol Wang] Title: [Sr. Manager, Regulatory Compliance] Signature:

Rev 11/20/07 09/09/2026 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: XGB-CWBB0046. Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Permanent Confidentiality Block Diagram, Schematics, Operational Description, Short-Term Confidentiality (180 Days) External Photos Internal Photos Test Setup Photos User's Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, (signature) Carol Wang (printed name)

Voyetra Turtle Beach, Inc. Date: 2026-9-9 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: XGB-CWBB0046 To Whom It May Concern: This letter is to ascertain thatVoyetra Turtle Beach, Inc./15822 BERNARDO CENTER DRIVE, SUITE 105, SAN DIEGO, CA 92127 USA EUT: Wireless Controller MODEL No.: CWBB0046 Has been the units used for conducting FCC compliance testing, the SDoC part Have be tested by EMTEK (SHENZHEN) CO., LTD. If you have any question or concerns, pls. contact us. Sincerely, Client’s signature ： Client’s name / title ：Carol Wang Contact information / address: Voyetra Turtle Beach, Inc. /15822 BERNARDO CENTER DRIVE, SUITE 105, SAN DIEGO, CA 92127 USA

Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: SUBJECT: FCC ID:XGB-CWBB0046 To Whom It May Concern: We, the undersigned, hereby authorize Lisa Wang at EMTEK (SHENZHEN) CO., LTD.on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by EMTEK (SHENZHEN) CO., LTD.on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Client’s name / title ：Carol Wang/ Sr. Manager, Regulatory Compliance Contact information / address: Voyetra Turtle Beach, Inc. /15822 BERNARDO CENTER DRIVE, SUITE 105, SAN DIEGO, CA 92127 USA

Signature Authority Delegation for Compliance Documentation Date: May 22, 2026 Voyetra Turtle Beach, Inc. 15822 Bernardo Center Drive, Suite 105 San Diego, CA 92127, USA To Whom It May Concern, This letter serves to formally delegate signature authority for compliance-related documentation on behalf of Voyetra Turtle Beach, Inc. to Carol Wang, Senior Manager, Regulatory Compliance. Effective as of May 29, 2026, the above-mentioned individual is authorized to review, approve, and sign documents related to regulatory compliance, including but not limited to: • Product regulatory certifications (e.g., safety, EMC, RF) • Test reports and declarations (e.g., DoC, CE, FCC, UKCA, etc.) • Environmental and chemical compliance documentation (e.g., RoHS, REACH) • Compliance statements and technical construction files • Other applicable compliance or regulatory submission documents This delegation is granted in accordance with the company's internal compliance management procedures and governance. This authorization may be provided to external parties as needed to support regulatory or audit requirements. All signatures executed under this authorization shall be considered legally binding and representative of Voyetra Turtle Beach, Inc. for compliance and regulatory purposes. Thank you for your attention to this matter. Sincerely, Joe Stachula Chief Technology Officer (CTO) Voyetra Turtle Beach, Inc.

Label location

FCC ID : XGB-CWBB0046  Test Standards and Limits 1. According to KDB 447498 D01 v06, Section 4.3.1 2. FCC Radiofrequency radiation exposure limits: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤50 mm are determined by: [(max power of channel)/(min test separation distance)]*[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm, and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 4.1 f) is applied to determine SAR test exclusion. For 2.4G band device, the limit of worse case is P max ≤3.0*D min )/ f =3.0*5/ 2.480 =9.525mW  Measurement and Calculation 1. Maximum transmit power Antenna Gain: 2.5 dBi TestMode Antenna Frequency[MHz] Conducted Peak Powert[dBm] BLE_1M Ant1 2402 1.66 2440 1.62 2480 1.98 BLE_2M Ant1 2404 1.67 2440 1.55 2478 1.92 Test Mode Antenna Frequency[MHz] Conducted Peak Powert[dBm] SRD Ant1 2402 1.05 2441 1.05 2480 1.37 2. MPE Calculation The Max Conducted Peak Output Power is 1.98 dBm. The Max Antenna Gain is 2.5 dBi. According to the formula. calculate the EIRP test result: EIRP= P x G = 1.58 mW x 1.63 = 2.575mW < 9.525mW So the SAR report is not required. -End of the Report-

Report No. ENS2604280366W00202R Page 1 of 56 Ver.1.0 TEST REPORT Product Name : Wireless Controller Model Number : CWBB0046 FCC ID : XGB-CWBB0046 Prepared for : VOYETRA TURTLE BEACH, INC. Address : 15822 BERNARDO CENTER DRIVE, SUITE 105, SAN DIEGO, CA 92127 USA Prepared by : EMTEK (SHENZHEN) CO., LTD. Address : Building 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China Tel: (0755) 26954280 Fax: (0755) 26954282 Report Number : ENS2604280366W00202R Date(s) of Tests : July 27, 2026 to September 1, 2026 Date of issue : September 1, 2026 $二维码$ Report No. ENS2604280366W00202R Page 2 of 56 Ver.1.0 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ............................................................................................................ 3 2 EUT TECHNICAL DESCRIPTION .......................................................................................................... 5 3 SUMMARY OF TEST RESULT ............................................................................................................... 6 4 TEST METHODOLOGY .......................................................................................................................... 7 4.1 GENERAL DESCRIPTION OF APPLIED STANDARDS ................................................................ 7 4.2 MEASUREMENT EQUIPMENT USED .......................................................................................... 7 4.3 DESCRIPTION OF TEST MODES ................................................................................................ 8 5 FACILITIES AND ACCREDITATIONS .................................................................................................... 9 5.1 FACILITIES .................................................................................................................................... 9 5.2 LABORATORY ACCREDITATIONS AND LISTINGS ..................................................................... 9 6 TEST SYSTEM UNCERTAINTY ........................................................................................................... 10 7 SETUP OF EQUIPMENT UNDER TEST ............................................................................................... 11 7.1 RADIO FREQUENCY TEST SETUP 1......................................................................................... 11 7.2 RADIO FREQUENCY TEST SETUP 2......................................................................................... 11 7.3 CONDUCTED EMISSION TEST SETUP ..................................................................................... 13 7.4 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ......................................................... 14 7.5 SUPPORT EQUIPMENT ............................................................................................................. 14 8 TEST REQUIREMENTS ........................................................................................................................ 15 8.1 DTS 6DB BANDWIDTH ............................................................................................................... 15 8.2 MAXIMUM PEAK CONDUCTED OUTPUT POWER ................................................................... 18 8.3 MAXIMUM POWER SPECTRAL DENSITY ................................................................................. 21 8.4 UNWANTED EMISSIONS IN NON-RESTRICTED FREQUENCY BANDS ................................. 24 8.5 RADIATED SPURIOUS EMISSION ............................................................................................. 35 8.6 CONDUCTED EMISSIONS TEST ............................................................................................... 50 8.7 ANTENNA APPLICATION ............................................................................................................ 53 9 APPENDIX PHOTOGRAPHS OF EUT ................................................................................................. 55 10 APPENDIX PHOTOGRAPHS OF TEST SETUP .................................................................................. 56 Report No. ENS2604280366W00202R Page 3 of 56 Ver.1.0 1 TEST RESULT CERTIFICATION Applicant : VOYETRA TURTLE BEACH, INC. Address： 15822 BERNARDO CENTER DRIVE, SUITE 105, SAN DIEGO, CA 92127 USA Manufacturer : VOYETRA TURTLE BEACH, INC. Address： 15822 BERNARDO CENTER DRIVE, SUITE 105, SAN DIEGO, CA 92127 USA EUT : Wireless Controller Model Name : CWBB0046 Trademark : TURTLE BEACH Measurement Procedure Used: APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 2 , Subpart J FCC 47 CFR Part 15, Subpart C PASS The above equipment was tested by EMTEK(SHENZHEN) CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10 (2020) and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements of FCC Rules Part 2 and Part 15.247 The test results of this report relate only to the tested sample identified in this report Date of Test : July 27, 2026 to September 1, 2026 Prepared by : Cai Zefeng /Editor Reviewer : Xia Lilu /Supervisor Approved & Authorized Signer : Wang Li /Manager Report No. ENS2604280366W00202R Page 4 of 56 Ver.1.0 Modified Information Version Report No. Revision Date Summary Ver.1.0 ENS2604280366W00202R / Original Report Report No. ENS2604280366W00202R Page 5 of 56 Ver.1.0 2 EUT TECHNICAL DESCRIPTION Product Wireless Controller Model Number CWBB0046 Bluetooth Version V5.3 Hardware Version V1.9 Software Version V3.5.0 Modulation GFSK Operating Frequency Range 2402-2480MHz Number of Channels 40 Channels for BT-LE 1Mbps 38 Channels for BT-LE 2Mbps Antenna Type Ceramic Antenna Antenna Gain 2.50 dBi Note: The antenna information provided by the manufacturer will have a certain impact on the test results. Power Supply DC 3.7V from battery DC 5V from USB type C port Temperature Range 0°C ~ 45°C Note: f…

Text truncated - open the document above for the full version.

Report No. ENS2604280366W00202R Page 32 of 56 Ver.1.0 BLE_2M-Ant1-2404-0~Reference-PASS BLE_2M-Ant1-2404-30~1000-PASS BLE_2M-Ant1-2404-1000~26500-PASS Report No. ENS2604280366W00202R Page 33 of 56 Ver.1.0 BLE_2M-Ant1-2440-0~Reference-PASS BLE_2M-Ant1-2440-30~1000-PASS BLE_2M-Ant1-2440-1000~26500-PASS Report No. ENS2604280366W00202R Page 34 of 56 Ver.1.0 BLE_2M-Ant1-2478-0~Reference-PASS BLE_2M-Ant1-2478-30~1000-PASS BLE_2M-Ant1-2478-1000~26500-PASS Report No. ENS2604280366W00202R Page 35 of 56 Ver.1.0 8.5 RADIATED SPURIOUS EMISSION 8.5.1 Applicable Standard According to FCC Part 15.247(d) and 15.209 and KDB 558074 D01 15.247 Meas Guidance v05r02 8.5.2 Conformance Limit According to FCC Part 15.247(d): radiated emissions which fall in the restricted bands, as defined in §15.205(a), must also comply with the radiated emission limits specified in §15.209(a) (see §15.205(c)). According to FCC Part15.205, Restricted bands MHz MHz MHz GHz 0.090-0.110 16.42-16.423 399.9-410 4.5-5.15 0.495-0.505 16.69475-16.69525 608-614 5.35-5.46 2.1735-2.1905 16.80425-16.80475 960-1240 7.25-7.75 4.125-4.128 25.5-25.67 1300-1427 8.025-8.5 4.17725-4.17775 37.5-38.25 1435-1626.5 9.0-9.2 4.20725-4.20775 73-74.6 1645.5-1646.5 9.3-9.5 6.215-6.218 74.8-75.2 1660-1710 10.6-12.7 6.26775-6.26825 123-138 2200-2300 14.47-14.5 8.291-8.294 149.9-150.05 2310-2390 15.35-16.2 8.362-8.366 156.52475-156.52525 2483.5-2500 17.7-21.4 8.37625-8.38675 156.7-156.9 2690-2900 22.01-23.12 8.41425-8.41475 162.0125-167.17 3260-3267 23.6-24.0 12.29-12.293 167.72-173.2 3332-3339 31.2-31.8 12.51975-12.52025 240-285 3345.8-3358 36.43-36.5 12.57675-12.57725 322-335.4 3600-4400 Above 38.6 13.36-13.41 According to FCC Part15.205, the level of any transmitter spurious emission in Restricted bands shall not exceed the level of the emission specified in the following table Restricted Frequency(MHz) Field Strength (μV/m) Field Strength (dBμV/m) Measurement Distance 0.009-0.490 2400/F(KHz) 20 log (uV/m) 300 0.490-1.705 24000/F(KHz) 20 log (uV/m) 30 1.705-30 30 29.5 30 30-88 100 40 3 88-216 150 43.5 3 216-960 200 46 3 Above 960 500 54 3 8.5.3 Test Configuration Test according to clause 7.2 radio frequency test setup 2 8.5.4 Test Procedure This test is required for any spurious emission that falls in a Restricted Band, as defined in Section 15.205. It must be performed with the highest gain of each type of antenna proposed for use with the EUT. Use the following spectrum analyzer settings: The EUT was placed on a turn table which is 0.8m above ground plane. Maximum procedure was performed on the highest emissions to ensure EUT compliance. Span = wide enough to fully capture the emission being measured RBW = 1 MHz for f  1 GHz(1GHz to 25GHz), 100 kHz for f < 1 GHz(30MHz to 1GHz) VBW  RBW Sweep = auto Detector function = peak Trace = max hold Report No. ENS2604280366W00202R Page 36 of 56 Ver.1.0 Follow the guidelines in ANSI C63.10 with respect to maximizing the emission by rotating the EUT, measuring the emission while the EUT is situated in three orthogonal planes (if appropriate), adjusting the measurement antenna height and polarization, etc. A pre-amp and a high pass filter are required for this test, in order to provide the measuring system with sufficient sensitivity. Allow the trace to stabilize. The peak reading of the emission, after being corrected by the antenna factor, cable loss, pre-amp gain, etc., is the peak field strength, which must comply with the limit specified in Section 15.35(b). Submit this data. Now set the VBW to 10 Hz, while maintaining all of the other instrument settings. This peak level, once corrected, must comply with the limit specified in Section 15.209. If the dwell time per channel of the hopping signal is less than 100 ms, then the reading obtained with the 10 Hz VBW may be further adjusted by a “duty cycle correction factor”, derived from 20log(dwell time/100 ms), in an effort to demonstrate compliance with the 15.209 limit. Submit this data. Repeat above procedures until all frequency measured was complete. 8.5.5 Test Results Pass Temperature: 25 C Relative Humidity: 60 ATM Pressure: 1011 mbar  Spurious Emission below 30MHz (9KHz to 30MHz) Freq. (MHz) Ant.Pol. Emission Level(dBuV/m) Limit 3m(dBuV/m) Margin(dB) H/V PK AV PK AV PK AV -- -- -- -- -- -- -- -- Note: the amplitude of spurious emission that is attenuated by more than 20dB below the permissible limit has no need to be reported. Distance extrapolation factor =40log(Specific distance/ test distance)( dB); Limit line=Specific limits(dBuV) + distance extrapolation factor Report No. ENS2604280366W00202R Page 37 of 56 Ver.1.0  Spurious Emission Above 1GHz (1GHz to 25GHz) BLE mode have been tested, and the worst result was report as below: Test mode: BLE(1M) Frequency: Channel 0: 2402MHz Freq. (MHz) Ant.Pol. Emission Level(dBuV/m) Limit 3m(dBuV/m) Margin(dB) Detector 4554.375 V 43.84 74.00 30.16 peak 8330.625 V 54.70 74.00 19.30 peak 17988.75 V 66.08 74.00 7.92 peak 4554.375 V 28.94 54.00 25.06 AVG 8330.625 V 36.42 54.00 17.58 AVG 17988.75 V 46.84 54.00 7.16 AVG 4816.875 H 44.72 74.00 29.28 peak 8353.125 H 55.67 74.00 18.33 peak 17986.875 H 67.11 74.00 6.89 peak 4816.875 H 30.00 54.00 24.00 AVG 8353.125 H 36.47 54.00 17.53 AVG 17986.875 H 46.90 54.00 7.10 AVG Test mode: BLE(1M) Frequency: Channel 19: 2440MHz Freq. (MHz) Ant.Pol. Emission Level(dBuV/m) Limit 3m(dBuV/m) Margin(dB) Detector 4848.75 V 43.19 74.00 30.81 peak 8296.875 V 54.42 74.00 19.58 peak 17979.375 V 66.06 74.00 7.94 peak 4848.75 V 30.04 54.00 23.96 AVG 8296.875 V 36.23 54.00 17.77 AVG 17979.375 V 47.01 54.00 6.99 AVG 4860 H 44.34 74.00 29.66 peak 8343.75 H 54.80 74.00 19.20 peak 17990.625 H 66.36 74.00 7.64 peak 4860 H 30.02 54.00 23.98 AVG 8343.75 H 36.12 54.00 17.88 AVG 17990.625 H 47.11 54.00 6.89 AVG Report No. ENS2604280366W00202R Page 38 of 56 Ver.1.0 Test mode: BLE(1M) Frequency: Channel 39: 2480MHz Freq. (MHz) Ant.Pol. Emission Level(dBuV/m) Limit 3m(dBuV/m) Margin(dB) Detector 4948.1…

Text truncated - open the document above for the full version.

5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728｜Fax: 886-3-4072738 ｜https://www.unictron.com 1 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com Product Name: WiFi/Bluetooth Chip Antenna – AA055U Part Number: H2U34W1H1Z0700 Features:  Stable and reliable in performances  Low profile, compact size  RoHS 2.0 compliance  SMT processes compatible  AEC-Q200 Compliant Applications:  ISM 2.4 GHz applications  ZigBee/BLE applications  Bluetooth earphone systems  Hand-held devices when WiFi / Bluetooth functions are needed, e.g., Smart phones  IEEE802.11 b/g/n  Wireless PCMCIA cards or USB dongles 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728｜Fax: 886-3-4072738 ｜https://www.unictron.com 2 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com WiFi/Bluetooth Chip Antenna MODEL: AA055U Version: A I. Specifications: Mechanical Specifications Dimensions (mm) 3.2 (L) x 1.6 (W) x 0.5 (H) Material Ceramic Termination Ag (environmental Pb free) Environmental Conditions Operation & Storage Temperature ( o C) -40 ~ +125 Storage Temperature ( o C) (Antenna with packing sealed) -5 ~ +40 Relative Humidity 10 ~ 70 % Items Specifications Frequencies (MHz) 2400~2484 Return loss (dB) < -10 Typ. VSWR < 2 Typ. Efficiency (%) @2442MHz 75.7 Average Gain (dB) -1.2 Peak Gain (dBi) 1.9 Test Condition 80 x 40 mm² (Evaluation board) Impedance (Ω) 50 Polarization Linear Polarization 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728｜Fax: 886-3-4072738 ｜https://www.unictron.com 3 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com II. Layout Guide: Solder Land Pattern: The solder land pattern (gold marking areas) is shown below. Recommendation on matching circuit will be provided according to customer’s installation conditions. Grounding Pin Signal Input Top View Bottom View 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728｜Fax: 886-3-4072738 ｜https://www.unictron.com 4 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com III. Mechanical Dimensions: a) Antenna Dimensions b) PIN Definition PIN 1 2 Soldering Pad Signal Tuning/Ground Unit: mm 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728｜Fax: 886-3-4072738 ｜https://www.unictron.com 5 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com c) Test Board with Antenna Unit: mm 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728｜Fax: 886-3-4072738 ｜https://www.unictron.com 6 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com IV. Properties: a) Return loss (dB) b) VSWR 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728｜Fax: 886-3-4072738 ｜https://www.unictron.com 7 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com c) Efficiency (%) d) Average Gain (dB) 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728｜Fax: 886-3-4072738 ｜https://www.unictron.com 8 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com b) Peak Gain (dBi) Frequency (MHz) 2400 2405 2410 2415 2420 2425 2430 2435 2440 2442 Average Gain (dB) -1.6 -1.3 -1.4 -1.2 -1.6 -1.4 -1.5 -1.3 -1.2 -1.2 Efficiency (%) 68.9 74.0 71.8 75.7 69.0 71.9 71.3 74.1 76.4 75.7 Peak Gain (dBi) 2.0 2.3 2.2 2.4 1.8 1.9 1.8 1.9 1.8 1.9 Frequency (MHz) 2450 2455 2460 2465 2470 2475 2480 2485 Average Gain (dB) -1.3 -1.2 -1.2 -1.0 -0.8 -0.7 -0.7 -1.0 Efficiency (%) 73.8 75.7 76.7 80.2 82.6 85.7 85.1 79.6 Peak Gain (dBi) 1.7 1.9 1.9 2.1 2.3 2.5 2.5 2.0 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728｜Fax: 886-3-4072738 ｜https://www.unictron.com 9 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com V. Antenna Radiation Pattern Measurement: The antenna radiation patterns are measured in Unictron’s 3D Anechoic Chamber. The measurement setup is as show below. Z XY YX X Y Z 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728｜Fax: 886-3-4072738 ｜https://www.unictron.com 10 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com 3D Radiation Gain Pattern 2400 MHz (unit: dBi) 2442 MHz (unit: dBi) 2485 MHz (unit: dBi) X Y Z 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728｜Fax: 886-3-4072738 ｜https://www.unictron.com 11 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com 2D Radiation Gain Pattern 2400 MHz (unit: dBi) 2442 MHz (unit: dBi) 2485 MHz (unit: dBi) Y X X Y Z Z XY Plane XZ Plane YZ Plane Y X X Y Z Z XY Plane XZ Plane YZ Plane Y X X Y Z Z XY Plane XZ Plane YZ Plane X Y Z 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728｜Fax: 886-3-4072738 ｜https://www.unictron.com 12 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com VI. Frequency tuning: System Matching Circuit Component Location Description Vendor Tolerance 1 1.2pF, (0402) MURATA ±0.05 pF 2 3.3nH, (0402) MURATA ±0.1 nH 3 NA Fine tuning element 4 1.2pF, (0402) MURATA ±0.05 pF 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728｜Fax: 886-3-4072738 ｜https://www.unictron.com 13 © Unict…

Text truncated - open the document above for the full version.