XHHBNRV1300-AEBOOK READER

NOOK GlowLight 4 Plus Nook Digital LLC, 33 East 17th Street, New York, NY 10003 © 2010-2021 NOOK Digital, LLC. All rights reserved. GlowLight ® , LendMe ® , Lifetime Library ® , More In Store ® , NOOK ® , NOOK Books ® , NOOK Friends ® , NOOK GlowLight™, NOOK GlowLight Plus™, NOOK GlowLight ® 3, NOOK Library ® , NOOK Magazine ® , NOOK Newspaper ® , NOOK Newsstand ® , NOOK Shop ® , Read In Store ® , B&N Readouts™, and the NOOK logos are trademarks of NOOK Digital, LLC or its affiliates. Patent Pending. Screenshots and product images are simulated and for instructional purposes only. They may differ from the actual product and are subject to change without notice. Content shown may vary from actual available content, which may change without notice. Digital content sold separately. Your use of NOOK is subject to the Terms of Service and Privacy Policy located in the Settings section of your device and here: NOOK.com/legal. Contains Reader ® Mobile technology by Adobe Systems Incorporated. Adobe ® , Reader ® , and Reader® Mobile are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Wi-Fi ® is a registered trademark of the Wi-Fi Alliance. Other trademarks and trade names are those of their respective owners. All trademarks or registered trademarks that are not the property of NOOK Digital, LLC or its affiliates are the property of their respective owners. Model: BNRV1300 Version: 1.0.0.B Table of Contents Introduction Contact Us Getting to Know Your NOOK Getting Started Barnes & Noble Account Registering Power and Charging Safety and Care Safety Information Caring for your NOOK Using NOOK Gestures Navigation Buttons The Status Bar The Left Side of the Status Bar The Center of the Status Bar The Right Side of the Status Bar GlowLight Turning GlowLight On or Off and Adjusting Its Brightness Night Mode Home Screen The New & Recent Shelf The Recommended for You Shelf Reading Books on Your NOOK Opening a Book Page Layout Turning Pages The Reading Tools Menu Reading Tools: Contents Using Bookmarks Reading Magazines and Newspapers on Your NOOK The Library on Your NOOK Pull-down Menus The Sync Button Searching Your Library Viewing and Sorting the Contents of Your Library Organizing Your Library on Shelves Archiving Books and Periodicals Unarchiving Books and Periodicals Transferring Files from Your Computer to Your NOOK Shopping on Your NOOK Introduction Purchasing Books, Newspapers, and Magazines Browsing Lists and Categories Searching for Titles, Authors, or Topics Buying a Book Buying a Single Issue of a Magazine or Newspaper Buying a Subscription to a Magazine or Newspaper What Happens When You Buy an Item in the Shop? Wishlist Using B&N Readouts™ Buying Content through B&N Readouts Changing Topics in B&N Readouts Customizing the My Picks Stream Using Your NOOK in a Barnes & Noble Store Read In Store®: Reading Books in a Barnes & Noble Store Searching Your NOOK Searching from the NOOK Navigation Menu Searching in Your Library Searching for Words with Accents and Other Diacritical Marks NOOK Settings Wireless Settings Configuring GlowLight Library Settings Reader Settings Download & Storage Account Settings Screen Settings Time Settings Viewing Legal Notices About Erase & Deregister Device Account Screen Configuring Profiles Managing Gift Cards and Credit Cards Using Your NOOK at Wi-Fi Hotspots Wi-Fi Networks in Barnes & Noble Stores AT&T Wi-Fi Hotspots Unsecured Wi-Fi Networks Proxied Wi-Fi Networks Updating the Software on Your NOOK Installing a Software Update over a Wireless Network Discovering the Version Number of Your NOOK Software Checking for the Availability of a New Software Update Tips and Troubleshooting Appendix A: Page Numbering and File Formats Appendix B: International Use and Languages Appendix C: One-Year Limited Warranty ONE-YEAR LIMITED WARRANTY Appendix D: Trademarks Adobe Reader Mobile Software AT&T Dictionary Fonts Google Wi-Fi Additional Information Appendix E: FCC Notices FCC IDs FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT INFORMATION TO THE USER FCC Radiation Exposure Statement Other Information Related to the Radio Appendix F: Industry Canada Notice Appendix G: Terms of Service Appendix H: AT&T Terms of Service & Acceptable Use Policy Terms of Service Privacy Policy Appendix I: Natural Resources Canada Appendix J: Intertek Safety Certification Introduction This User Guide is designed to help you get the most enjoyment out of your NOOK GlowLight 4 Plus. Contact Us If you have questions about your NOOK ® that this guide doesn’t answer, be sure to visit the NOOK online support site at: nook.com/GL4 The online support center offers additional information about your NOOK, including: • Related documents • Helpful articles • Technical support Stay in Touch Follow us on Facebook and Twitter to hear about new releases, exclusive offers, and free NOOK Books ® . http://www.facebook.com/nookBN http://www.twitter.com/nookbn Now, let’s get started with a quick tour of your NOOK and its main features. Getting to Know Your NOOK Your NOOK GlowLight 4 Plus is an eReader with a touchscreen grayscale E Ink ® display and a front light now equipped with Night Mode. On your NOOK, you can: • Read books, magazines, and newspapers • Shop from over four million titles • Buy books, single issues of magazines and newspapers, as well as subscriptions to magazines and newspapers • Store hundreds of books, along with magazines, newspapers, and personal files • Sample books for free • Explore books and articles through B&N Readouts™, Barnes & Noble’s free digital discovery feature, refreshed daily • Store and read files, including PDFs Your NOOK is small enough to hold easily with one hand and to slip into a bag or a purse. When you turn on the GlowLight ® feature on your NOOK, you can read your favorite books and periodicals even in the dark. Power Button The power button for your NOOK is located on the top edge. Press and hold …

Text truncated - open the document above for the full version.

Reference No.:BEMI-WTW-P22100258_ExtPho Page 1/4 CONSTRUCTION PHOTOS OF EUT Reference No.:BEMI-WTW-P22100258_ExtPho Page 2/4 Reference No.:BEMI-WTW-P22100258_ExtPho Page 3/4 Reference No.:BEMI-WTW-P22100258_ExtPho Page 4/4

The label will be permanently affixed and readily visible. Back of EUT Label location

Reference No.:BEMI-WTW-P22100258_IntPho Page 1/8 CONSTRUCTION PHOTOS OF EUT Reference No.:BEMI-WTW-P22100258_IntPho Page 2/8 Reference No.:BEMI-WTW-P22100258_IntPho Page 3/8 Reference No.:BEMI-WTW-P22100258_IntPho Page 4/8 Reference No.:BEMI-WTW-P22100258_IntPho Page 5/8 Reference No.:BEMI-WTW-P22100258_IntPho Page 6/8 Reference No.:BEMI-WTW-P22100258_IntPho Page 7/8 Antenna Reference No.:BEMI-WTW-P22100258_IntPho Page 8/8

SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 29 Report No. : SFBEMI-WTW-P22100258 Issued Date : Feb. 15, 2023 SAR Test Report Report No. : SFBEMI-WTW-P22100258 Applicant : Nook Digital LLC Address : 33 E 17th Street New York, New York 10003 United States Product : EBOOK READER FCC ID : XHHBNRV1300-A Brand : Nook Model No. : BNRV1300 FCC Rule Part : CFR §2.1093 Standards : IEC/IEEE 66209-1528:2020, KDB 865664 D01 v01r04, KDB 865664 D02 v01r02, KDB 248227 D01 v02r02, KDB 447498 D01 v06, KDB 616217 D04 v01r02 Sample Received Date : Oct. 12, 2022 Date of Testing : Jan. 06, 2023 Lab Address : No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location : No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City, Taiwan CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch–Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Vera Huang / Specialist Approved By : Gordon Lin / Manager FCC Accredited No.: TW0003 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 29 Report No. : SFBEMI-WTW-P22100258 Issued Date : Feb. 15, 2023 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY6 System ............................................................................................................................................... 6 3.2.1 Robot ............................................................................................................................................................... 7 3.2.2 Probes ............................................................................................................................................................. 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................. 8 3.2.4 Phantoms ......................................................................................................................................................... 8 3.2.5 Device Holder .................................................................................................................................................. 9 3.2.6 System Validation Dipoles ............................................................................................................................. 10 3.2.7 Power Source ................................................................................................................................................ 10 3.2.8 Tissue Simulating Liquids .............................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 13 3.4 SAR Measurement Procedure ................................................................................................................................... 14 3.4.1 Area …

Text truncated - open the document above for the full version.

Plots of System Verification Appendix A. Plots of System Verification The plots for system verification are shown as follows. Report No.: SFBEMI-WTW-P22100258 Plots of System Verification Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2023/01/06 S01 System Check_H2450_230106 DUT: Dipole 2450 MHz; Type: D2450V2; SN: 737 Communication System: UID 0, CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: H06T27N5_0106 Medium parameters used: f = 2450 MHz; σ = 1.842 S/m; ε r = 40.331; ρ = 1000 kg/m 3 Ambient Temperature：22.9 °C ; Liquid Temperature：21.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN7472; ConvF(7.89, 7.89, 7.89) @ 2450 MHz; Calibrated: 2022/05/27 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2022/06/01 - Phantom: ELI Phantom_2118; Type: QD OVA 004 AA; - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 4.14 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 40.25 V/m; Power Drift = 0.11 dB Peak SAR (extrapolated) = 5.18 W/kg SAR(1 g) = 2.51 W/kg; SAR(10 g) = 1.19 W/kg (SAR corrected for target medium) Maximum value of SAR (measured) = 4.21 W/kg Report No.: SFBEMI-WTW-P22100258 Plots of System Verification Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2023/01/06 S02 System Check_H2450_230106 DUT: Dipole 2450 MHz; Type: D2450V2; SN: 737 Communication System: UID 0, CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: H06T27N5_0106 Medium parameters used: f = 2450 MHz; σ = 1.842 S/m; ε r = 40.331; ρ = 1000 kg/m 3 Ambient Temperature：22.9 °C ; Liquid Temperature：21.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN7472; ConvF(7.89, 7.89, 7.89) @ 2450 MHz; Calibrated: 2022/05/27 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2022/06/01 - Phantom: ELI Phantom_2118; Type: QD OVA 004 AA; - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 4.14 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 40.25 V/m; Power Drift = 0.11 dB Peak SAR (extrapolated) = 5.18 W/kg SAR(1 g) = 2.51 W/kg; SAR(10 g) = 1.19 W/kg (SAR corrected for target medium) Maximum value of SAR (measured) = 4.21 W/kg Report No.: SFBEMI-WTW-P22100258 Plots of Measurement Appendix B. Plots of Measurement The SAR plots for highest measured SAR in each exposure configuration, wireless mode and frequency band combination are shown as follows. Report No.: SFBEMI-WTW-P22100258 Plots of Measurement Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2023/01/06 P01 WLAN2.4G_802.11b_Rear Face of Tablet_0mm_Ch6 DUT: BEMI-WTW-P22100258 Communication System: UID 10012 - CAB, IEEE 802.11b WiFi 2.4 GHz (DSSS, 1 Mbps); Frequency: 2437 MHz;Duty Cycle: 1:1 Medium: H06T27N5_0106 Medium parameters used: f = 2437 MHz; σ = 1.831 S/m; ε r = 40.357; ρ = 1000 kg/m 3 Ambient Temperature：22.9 °C ; Liquid Temperature：21.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN7472; ConvF(7.89, 7.89, 7.89) @ 2437 MHz; Calibrated: 2022/05/27 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2022/06/01 - Phantom: ELI Phantom_2118; Type: QD OVA 004 AA; - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Area Scan (151x51x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 1.12 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 20.39 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 2.97 W/kg SAR(1 g) = 0.940 W/kg; SAR(10 g) = 0.345 W/kg (SAR corrected for target medium) Smallest distance from peaks to all points 3 dB below = 5.4 mm Ratio of SAR at M2 to SAR at M1 = 39.4% Maximum value of SAR (measured) = 1.85 W/kg Report No.: SFBEMI-WTW-P22100258 Plots of Measurement Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2023/01/06 P02 BT_BDR_Rear Face of Tablet_0mm_Ch0 DUT: BEMI-WTW-P22100258 Communication System: UID 10032 - CAA, IEEE 802.15.1 Bluetooth (GFSK, DH5); Frequency: 2402 MHz;Duty Cycle: 1:1.31 Medium: H06T27N5_0106 Medium parameters used: f = 2402 MHz; σ = 1.804 S/m; ε r = 40.431; ρ = 1000 kg/m 3 Ambient Temperature：22.9 °C ; Liquid Temperature：21.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN7472; ConvF(7.89, 7.89, 7.89) @ 2402 MHz; Calibrated: 2022/05/27 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2022/06/01 - Phantom: ELI Phantom_2118; Type: QD OVA 004 AA; - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Area Scan (151x51x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.233 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.545 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 0.479 W/kg SAR(1 g) = 0.153 W/kg; SAR(10 g) = 0.056 W/kg (SAR corrected for target medium) Smallest distance from peaks to all points 3 dB below = 5.4 mm Ratio of SAR at M2 to SAR at M1 = 38.7% Maximum value of SAR (measured) = 0.310 W/kg Report No.: SFBEMI-WTW-P22100258 Appendix Z. Calibration Certificate for Probe and Dipole The SPEAG calibration certificates are shown as follows. Report No.: SFBEMI-WTW-P22100258 Report No.: SFBEMI-WTW-P22100258 Report No.: SFBEMI-WTW-P22100258 Report No.: SFBEMI-WTW-P22100258 Report No.: SFBEMI-WTW-P22100258 Report No.: SFBEMI-WTW-P22100258 Report No.: SFBEMI-WTW-P22100258 Model：D2450V2S/N：737Measurement Date： 2022/8/25 Frequency (MHz) Type Item Previous Measurement Annual Check Deviation Accepted Tolerance Result Real Impedance 53.98951.387-2.602±5ΩPASS Imaginary Impedance 4.29265.36051.07±5ΩPASS Return Loss -24.989-24.145-3.38%±20%PASS 2450 Free Space 2450 MHz，Free Space Annual Confi…

Text truncated - open the document above for the full version.

Approval sheet Page 1 of 12 ASC_RFECA3216060AAT_V02 Feb. 2023 RFECA Series – RoHS Compliance CERAMIC ANTENNA Halogens Free Product 2.4 GHz ISM Band Working Frequency P/N: RFECA3216060AAT *Contents in this sheet are subject to change without prior notice . No. 566-1, Kao-Shi Rd., Yangmei Dist. Taoyuan City 32668, Taiwan (R.O.C.) Approval sheet Page 2 of 12 ASC_RFECA3216060AAT_V02 Feb. 2023 FEATURES 1. Surface Mounted Devices with a small dimension of 3.2 X 1.6 X 0.6 mm 3 meet future miniaturization trend. 2. LTCC process. 3. High stability in Temperature / Humidity Change. 4. Superb performance to place on the middle of PCB edge and excellent peak/ average gain observed by field test application. APPLICATIONS 1. ISM Band 2.4GHz applications. 2. Bluetooth.. CONSTRUCTION DIMENSIONS Figure Symbol Dimension (mm) L 3.10 ± 0.20 W 1.60 ± 0.20 T 0.60 ± 0.10 A 0.25 ± 0.20 PIN Connection 1 Feeding 2 Soldering terminal P1 P2 Approval sheet Page 3 of 12 ASC_RFECA3216060AAT_V02 Feb. 2023 SOLDER LAND PATTERN DESIGN Type1-Figure (Empty Space 6.45 mm x 4.00 mm) The limited size for ECA3216 is L>30mm and D>6mm Land Pattern TYPE 1 ELECTRONIC CHARACTERISTICS *Note 1. Central Frequency should be defined after customers’ application approval. Item Specification Working Frequency Range 2.4GHz~2.4835GHz (Note-1) Gain 2 dBi (Typical) VSWR 2.1 max. Polarization Linear Azimuth Beamwidth Omni-directional Impedance 50 Approval sheet Page 4 of 12 ASC_RFECA3216060AAT_V02 Feb. 2023 Antenna on Test Board ( Thickness 0.8mm) Antenna S11 on Test Board Antenna VSWR on Test Board E E Approval sheet Page 5 of 12 ASC_RFECA3216060AAT_V02 Feb. 2023 RADIATION PATTERN Radiation Pattern and Gain were dependent on measurement board design. The specification of RFECA3216060AAT antenna was measured based on the PCB size and installation position as shown in the below figure Test Board. Vertical Horizontal Y - Z Plane X - Z Plane X - Y Plane Approval sheet Page 6 of 12 ASC_RFECA3216060AAT_V02 Feb. 2023 SOLDER LAND PATTERN DESIGN Type2-Figure (Empty Space 8.00 mm x 3.20 mm) The limited size for ECA3216 is L>30mm and D>6mm Land Pattern TYPE 2 ELECTRONIC CHARACTERISTICS *Note 1. Central Frequency should be defined after customers’ application approval. Item Specification Working Frequency Range 2.4GHz~2.4835GHz (Note-1) Gain 2 dBi (Typical) VSWR 2.1 max. Polarization Linear Azimuth Beamwidth Omni-directional Impedance 50 Approval sheet Page 7 of 12 ASC_RFECA3216060AAT_V02 Feb. 2023 Antenna on Test Board ( Thickness 0.8mm) Antenna S11 on Test Board Antenna VSWR on Test Board E E Approval sheet Page 8 of 12 ASC_RFECA3216060AAT_V02 Feb. 2023 RADIATION PATTERN Radiation Pattern and Gain were dependent on measurement board design. The specification of RFECA3216060AAT antenna was measured based on the PCB size and installation position as shown in the below figure Test Board. Vertical Horizontal Y - Z Plane X - Z Plane X - Y Plane Approval sheet Page 9 of 12 ASC_RFECA3216060AAT_V02 Feb. 2023 RELIABILITY TEST Test item Test condition / Test method Specification Solderability JIS C 0050-4.6 JESD22-B102D *Solder bath temperature：235  5C *Immersion time：2  0.5 sec Solder：Sn3Ag0.5Cu for lead-free At least 95% of a surface of each terminal electrode must be covered by fresh solder. Leaching (Resistance to dissolution of metallization) IEC 60068-2-58 *Solder bath temperature：260  5C *Leaching immersion time：30  0.5 sec Solder : SN63A Loss of metallization on the edges of each electrode shall not exceed 25%. Resistance to soldering heat JIS C 0050-5.4 *Preheating temperature：120~150°C, 1 minute. *Solder temperature：2705C *Immersion time：101 sec Solder：Sn3Ag0.5Cu for lead-free Measurement to be made after keeping at room temperature for 242 hrs No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Loss of metallization on the edges of each electrode shall not exceed 25%. Drop Test JIS C 0044 Customer’s specification. *Height：75 cm *Test Surface：Rigid surface of concrete or steel. *Times：6 surfaces for each units；2 times for each side. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Vibration JIS C 0040 *Frequency：10Hz~55Hz~10Hz(1min) *Total amplitude：1.5mm *Test times：6hrs.(Two hrs each in three mutually perpendicular directions) No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Adhesive Strength of Termination JIS C 0051- 7.4.3 *Pressurizing force： 5N(≦0603)；10N(>0603) *Test time：10±1 sec No remarkable damage or removal of the termination. Bending test JIS C 0051- 7.4.1 The middle part of substrate shall be pressurized by means of the pressurizing rod at a rate of about 1 mm/s per second until the deflection becomes 1mm/s and then pressure shall be maintained for 51 sec. Measurement to be made after keeping at room temperature for 242 hours No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Approval sheet Page 10 of 12 ASC_RFECA3216060AAT_V02 Feb. 2023 Temperature cycle JIS C 0025 1. 303 minutes at -40C3C, 2. 10~15 minutes at room temperature, 3. 303 minutes at +85C3C, 4. 10~15 minutes at room temperature, Total 100 continuous cycles Measurement to be made after keeping at room temperature for 242 hrs No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. High temperature JIS C 0021 *Temperature：85C2C *Test duration：1000+24/-0 hours Measurement to be made after keeping at room temperature for 242 hrs No mechanical damage. Electrical specification shall satisfy…

Text truncated - open the document above for the full version.

Report No.: RFBEMI-WTW-P22100258-1 Page No. 1 / 44 Report Format Version: 7.1.0 Reference No.: BEMI-WTW-P22100258 TEST REPORT CERTIFICATE OF CONFORMITY Standard: 47 CFR FCC Part 15, Subpart C (Section 15.247) Report No.: RFBEMI-WTW-P22100258-1 FCC ID: XHHBNRV1300-A Product: EBOOK READER Brand: Nook Model No.: BNRV1300 Received Date: 2022/10/20 Test Date: 2023/1/9 ~ 2023/1/11 Issued Date: 2023/2/15 Applicant: Nook Digital LLC Address: 33 E 17th Street New York, New York 10003 United States Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration / Designation Number: 198487 / TW2021 Approved by: , Date: 2023/2/15 Jeremy Lin / Project Engineer This test report consists of 44 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Annie Chang / Senior Specialist This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: RFBEMI-WTW-P22100258-1 Page No. 2 / 44 Report Format Version: 7.1.0 Reference No.: BEMI-WTW-P22100258 Table of Contents Release Control Record ....................................................................................................................................................... 4 1 Certificate .................................................................................................................................................................... 5 2 Summary of Test Results .......................................................................................................................................... 6 2.1 Measurement Uncertainty ........................................................................................................................................ 6 2.2 Supplementary Information ...................................................................................................................................... 6 3 General Information ................................................................................................................................................... 7 3.1 General Description .................................................................................................................................................. 7 3.2 Antenna Description of EUT ..................................................................................................................................... 7 3.3 Channel List .............................................................................................................................................................. 8 3.4 Test Mode Applicability and Tested Channel Detail .................................................................................................. 9 3.5 Duty Cycle of Test Signal........................................................................................................................................ 10 3.6 Test Program Used and Operation Descriptions .................................................................................................... 11 3.7 Connection Diagram of EUT and Peripheral Devices ............................................................................................ 11 3.8 Configuration of Peripheral Devices a…

Text truncated - open the document above for the full version.