XHT-8240-01Toy RC Bounce Brawler

Vehicle 1. Make sure the power switch on the bottom of the vehicle is on the o position. 2. Use a Phillips-head screwdriver to release the screw on the battery cover and turn the lockers then remove the battery cover. 3. Insert 8 AA 1.5V batteries (not included) into the battery compartment according to the battery diagram. 4. Replace the battery cover and securely tighten the screw. 5. Use the tire pump (included) to inflate the inflatable tires. Remote control 1. Use a tool to press and hold the battery cover release on the back of the remote control and then slide down the battery cover. 2. Insert 3 AAA 1.5V batteries (not included) into the battery compartment according to the battery diagram. 3. Slide the battery cover back into place securely. Tires IMPORTANT: Adult supervision required. Keep tire pump and inflation needle out of reach of children when they are not being supervised by an adult. 1. Insert the inflation needle into the inflation hole in a tire. 2. Inflate the tire until it is the same size as the diagram on the tire measure card. 3. Repeat steps 3 and 4 for the remaining tires. IMPORTANT: Do not overinflate the tires. If the tire is overinflated, remove the needle from the pump and insert it into the air hole to release some air until it is the same size as the measure card. Never drive the vehicle with overinflated or underinflated tires. The tires may deflate during shipping or when stored and will periodically require inflation. Save the tire measure card in a safe place for future reference. BOUNCE BRAWLER 6+ 1 Bounce Brawler 1 Remote Control 1 Tire Pump 1 Tire Measure Card Contents Getting Started Power and Pairing 1. Make sure both the remote control and vehicle are powered o. 2. Press the power button on the remote control to power on the remote control. The status light will glow and begin fading on and o to indicate the remote control is in pairing mode and ready to pair with the vehicle. 3. Slide the switch on the bottom of the vehicle to the on position to power on the vehicle. The rear lights will glow and begin fading on and o to indicate the vehicle is in pairing mode. The vehicle will automatically pair with the remote control. 4. Wait for the status light on the remote control to quit fading on and o. It will stay solidly lit when pairing is successful. 5. If pairing is unsuccessful within 60 seconds, power o both the remote control and vehicle and then repeat steps 2 through 4. 6. Start driving! 7. If pairing is interrupted or out of range, the remote control and vehicle will both enter pairing mode and attempt to reconnect. Move the remote control and vehicle closer together. If pairing is unsuccessful within 60 seconds, power o both the remote control and vehicle and then repeat steps 2 through 4. 8. When finished driving, press the power button on the remote control to power o the remote control and flip the switch on the bottom of the vehicle to the o position to power o the vehicle. Note: To save battery life, the remote control and vehicle automatically enter sleep mode after 5 minutes of inactivity. To wake from sleep mode, power o and then power on the remote control and vehicle. IMPORTANT: If the vehicle stops suddenly while there is beep sound, power o the vehicle and wait at least 30 minutes for the battery to cool before continuing to drive. Multiple Drivers The remote control connects to the vehicle using 2.4GHz digital channel selection that allows up to 16 drivers to race side by side in the same wireless range without interference. Pair each vehicle and remote separately. LED Lights Battery Cover Release Button OFFON BOUNCE BRAWLER 6+ Drive forwards and then reverse quickly. Forward or Reverse Left or Right Spin Back Flip Auto Stunt Lights Front Flip This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Sharper Image® name and logos (including the 77 logo) are trademarks or registered trademarks. Distributed by and © 2025 MerchSource, LLC. Irvine, CA 92618. All rights reserved. Model No.: 1020185 • Adult supervision is recommended when operating the vehicle. • Always drive responsibly and make sure driving paths are clear. Never drive towards or in close proximity to people or animals. Never drive on streets or roadways to avoid trac hazards. • Keep fingers, hair, and loose clothing away from tires and all moving parts while the vehicle is in motion. • Avoid exposing the vehicle and remote control to water. Avoid driving through water. Never drive outdoors in rain or snow. Never leave…

Text truncated - open the document above for the full version.

(Guangdong Yinrun Industry Co.,Ltd.) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-19-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: XHT-8240-01 [Guangdong Yinrun Industry Co.,Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Guangdong Yinrun Industry Co.,Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Cyrus Yang) (Guangdong Yinrun Industry Co.,Ltd.) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-19-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: XHT-8240-01 [Guangdong Yinrun Industry Co.,Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Cyrus Yang)

Page 1 of 2 SCS-F236 Attestation of US Agent for Service Process Rev 1.0 Attestation of US Agent for Service Process Reason for Amendment Revision # Approved Date To Initial Release 1.0 Jul-01-2024 Guangdong Yinrun Industry Co.,Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA FCC ID: XHT-8240-01 FRN: 0018876391 Date of Filing to TCB: 03-18-2026 Ref: Attestation Statements Part 2.911(d)(7) Filing [Guangdong Yinrun Industry Co.,Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, [FCC US Agent, LLC] is our designated U.S. agent for service of process for the above referenced FCC ID. [Guangdong Yinrun Industry Co.,Ltd.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment and will notify the TCB/FCC in a timely manner if the US Processing Agent changes. [FCC US Agent, LLC] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: [FCC US Agent, LLC] U.S. Agent FRN: [0033402884] Address: [3722 Illinois Avenue, Saint Charles, IL, 60174, USA] Contact Person: [Tim Payne] Tel.: [708-571-3148] Email: [[email protected]] Sincerely, (Applicant printed name) Cyrus Yang (Applicant signature) (US Local Agent printed name) Tim Payne (US Local Agent signature)

Rev 11/20/07 Guangdong Yinrun Industry Co.,Ltd. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: XHT-8240-01 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name (Block Diagram, Schematics, Operational Description,BOM) (SCH, Block Diagram,Technical Description,BOM) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name ( () Sincerely, (signature) (printed name) Cyrus Yang

Guangdong Yinrun Industry Co.,Ltd. Declaration of Identical Product Hereby, Name of manufacturer: Guangdong Yinrun Industry Co.,Ltd. Address: Yinrun garden, Laimei Ind. Zone, Chenghai, Shantou City, Guangdong, China City: Shantou Country: China declares that: Product description: Toy RC Bounce Brawler Type designation(s): 1020555, 10XXXXX (where XXXXX can be 00000-99999 which represent different customers) Trademark: Sharper Image Family name is technically identical to: Product description: Toy RC Bounce Brawler Type designation: 1020185 Trademark: Sharper Image Certificate number (if applicable) They are identical with the test model 1020185 except the color of the appearance and model number for trading purpose. Date: 2026.3.19 City: Shantou Name: Cyrus Yang Signature

C:\Users\kdyuan\Desktop\kate 资料\A report\POA_Letter.docx Guangdong Yinrun Industry Co.,Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 20256.03.19 SUBJECT: FCC Application for FCC ID: XHT-8240-01 To Whom It May Concern: We, the undersigned, hereby authorize _Edwin Ye by_Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch___ at __No. 96, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, Chinaon our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Edwin Yeby_Bureau Veritas Shenzhen Co., Ltd. Dongguan Branchon our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Cyrus Yang

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 4 Report Version A Reference No.: 2601WDG0380-2 PHOTOGRAPHS OF THE EUT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 4 Report Version A Reference No.: 2601WDG0380-2 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 4 Report Version A Reference No.: 2601WDG0380-2 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 4 Report Version A Reference No.: 2601WDG0380-2

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 4 Report Version A Reference No.: 2601WDG0380-2 PHOTOGRAPHS OF THE EUT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 4 Report Version A Reference No.: 2601WDG0380-2 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 4 Report Version A Reference No.: 2601WDG0380-2 2.4GHz RF ANT. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 4 Report Version A Reference No.: 2601WDG0380-2

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 6 Report Version A Test Report No.: FM2601WDG0380-2 RF EXPOSURE REPORT Applicant Guangdong Yinrun Industry Co., Ltd. Address Yinrun garden, Laimei Ind. Zone, Chenghai, Shantou City, Guangdong, China Manufacturer or Supplier Guangdong Yinrun Industry Co., Ltd. Address Yinrun garden, Laimei Ind. Zone, Chenghai, Shantou City, Guangdong, China Product Toy RC Bounce Brawler Brand Name Sharper Image Model 1020185 Additional Model & Model Difference 1020555, 10XXXXX (where XXXXX can be 00000-99999 which represent different customers), see item 1 Date of tests Jan. 23, 2026 ~ Feb. 04, 2025 FCC Part 2 (Section 2.1093) KDB 447498 D01 V06 IEEE C95.1 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Prepared by Eric Fang Project Engineer / EMC Department Approved by Glyn He Assistant Manager / EMC Department Date: Apr. 03, 2026 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 6 Report Version A Test Report No.: FM2601WDG0380-2 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................ 3 1. CERTIFICATION .............................................................................................. 4 2. RF EXPOSURE DEFINE ................................................................................. 5 3. CLASSIFICATION ........................................................................................... 5 4. SAR TEST EXCLUSION THRESHOLDS ........................................................ 5 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 6 Report Version A Test Report No.: FM2601WDG0380-2 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED FM2601WDG0380-2 Original release Apr. 03, 2026 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 6 Report Version A Test Report No.: FM2601WDG0380-2 1. CERTIFICATION FCC ID: XHT-8240-01 PRODUCT: Toy RC Bounce Brawler BRAND NAME: Sharper Image MODEL NO.: 1020185 ADDITIONAL NO.: 1020555, 10XXXXX (where XXXXX can be 00000-99999 which represent different customers) APPLICANT: Guangdong Yinrun Industry Co., Ltd. STANDARDS: FCC Part 2 (Section 2.1093) KDB 447498 D01 V06 IEEE C95.1 NOTE: Additional models (see above table) are identical with the test model 1020185 except the color of the appearance and model number for trading purpose. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 5 of 6 Report Version A Test Report No.: FM2601WDG0380-2 2. RF EXPOSURE DEFINE The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,16 where ➢ f(GHz) is the RF channel transmit frequency in GHz ➢ Power and distance are rounded to the nearest mW and mm before calculation ➢ The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determi…

Text truncated - open the document above for the full version.

Length：30mm Antenna Type: Wire Antenna Antenna Gain: 2dBi Antenna operates frequency range: 2407MHz ~ 2477MHz Only radiated measurements are used to show compliance with FCC limits for fundamental and spurious emissions.

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 32 Report Version A Test Report No.: RF2601WDG0380-2 TEST REPORT Applicant: Guangdong Yinrun Industry Co., Ltd. Address: Yinrun garden, Laimei Ind. Zone, Chenghai, Shantou City, Guangdong, China Manufacturer or Supplier Guangdong Yinrun Industry Co.,Ltd. Address Yinrun garden, Laimei Ind. Zone, Chenghai, Shantou City, Guangdong, China Product: Toy RC Bounce Brawler Brand Name: Sharper Image Model: 1020185 Additional Model & Model Difference 1020555, 10XXXXX (where XXXXX can be 00000-99999 which represent different customers), see item 3.1 Date of tests: Jan. 23, 2026 ~ Feb. 04, 2025 the tests have been carried out according to the requirements of the following standard: FCC Part 15, Subpart C, Section 15.249 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Prepared by Eric Fang Project Engineer / EMC Department Approved by Glyn He Assistant Manager / EMC Department Date: Apr. 03, 2026 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 32 Report Version A Test Report No.: RF2601WDG0380-2 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................ 3 1 SUMMARY OF TEST RESULTS .................................................................................................... 4 2 MEASUREMENT UNCERTAINTY ................................................................................................. 4 3 GENERAL INFORMATION ............................................................................................................ 5 3.1 GENERAL DESCRIPTION OF EUT .......................................................................................... 5 3.2 DESCRIPTION OF TEST MODES ............................................................................................ 6 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................................... 8 3.4 DESCRIPTION OF SUPPORT UNITS ...................................................................................... 8 3.5 DUTY CYCLE OF TESET SIGNAL ........................................................................................... 9 3.6 CONFIGURATION OF SYSTEM UNDER TEST ..................................................................... 10 4. TEST TYPES AND RESULTS .......................................................................................................11 4.1 RADIATED EMISSION MEASUREMENT ................................................................................ 11 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT ..................................................... 11 4.1.2 TEST INSTRUMENTS ..................................................................................................... 12 4.1.3 TEST PROCEDURES ..................................................................................................... 13 4.1.4 DEVIATION FROM TEST STANDARD ........................................................................... 13 4.1.5 TEST SETUP ................................................................................................................... 14 4.1.6 EUT OPERATING CONDITIONS .................................................................................... 15 4.1.7 TEST RESULTS .............................................................................................................. 16 4.2 20DB BANDWIDTH MEASUREMENT .................................................................................... 27 4.2.1 LIMITS OF 20DB BANDWIDTH MEASUREMENT ......................................................... 27 4.2.2 TEST INSTRUMENTS .................................................................................................... 27 4.2.3 TEST PROCEDURE ....................................................................................................... 28 4.2.4 DEVIATION FROM TES…

Text truncated - open the document above for the full version.

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 3 Report Version A Reference No.: 2601WDG0380-2 SET-UP FOR RADIATED EMISSION TEST Frequency Range< 30MHz~1GHz > Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 3 Report Version A Reference No.: 2601WDG0380-2 Frequency Range< Above 1GHz > Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 3 Report Version A Reference No.: 2601WDG0380-2 SET-UP FOR RF PORT CONDUCTED MEASUREMENT EUT