XJJCHANGCHENG1RC CAR SERIES

CHANGCHENG PLASTIC FACTORY Address: South Port Section Chenglai Road Chenghai Zone, Shantou City, Guangdong, China SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 1 Rev 2.0 (Current Date) July 5, 2010 To: SIEMIC, INC. 2206 Ringwood Avenue, San Jose, CA 95131 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, _______ CHANGCHENG PLASTIC FACTORY ______hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): Product description: RC CAR SERIES Model name: 2009, 2011, 2119, 2206, 2017, 2115, 2201, 2207, 2111, 2116, 2202, 2208, 2112, 2117, 2203, 2209, 2113, 2118, 2205, 2010, 2210, 2212, 2215, 2217, 2211, 2213, 2216, 2218 We affirm that between SIEMIC and __ CHANGCHENG PLASTIC FACTORY ___, any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature : Client’s name / title: Zhang XuanLian General Manager, Phone : +86 754 85860054 Fax : +86 754 85864054 Email : [email protected] Address: South Port Section Chenglai Road Chenghai Zone, Shantou City, Guangdong, China

External photos

27MHZ FCC ID： ：： ：XJJCHANGCHENG1 MADE IN CHINA This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2) this device mustaccept any interference received, including interference that may cause undesired operation.

Internal photos

Report No.: GZEM100600095801 Page: 1 of 17 FCC ID: XJJCHANGCHENG1 Authorized Signature: Stephen Guo Lab Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only SGS-CSTC Standards Technical Services Ltd. 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 Tel: +86 20 82155555 Fax: +86 20 82075059 Email: [email protected] FEDERAL COMMUNICATIONS COMMISSION Registration number: 282399 TEST REPORT Application No.: GZEM1006000958RF Applicant: CHANGCHENG PLASTIC FACTORY FCC ID: XJJCHANGCHENG1 Equipment under Test (EUT) Name: RC CAR SERIES Model No.: 2009 Addition Model No.: 2011, 2119, 2206, 2017, 2115, 2201, 2207, 2111, 2116, 2202, 2208, 2112, 2117, 2203, 2209, 2113, 2118, 2205, 2010, 2210, 2212, 2215, 2217, 2211, 2213, 2216, 2218 ♣ ♣ Please refer to section 3 of this report for further details. Function: Radio toys with 27.145MHz as a carrier. Standards: FCC PART 15, SUBPART C: 2009 (Section 15.227) Date of Receipt: 2010-06-29 Date of Issue: 2010-07-16 Test Result : PASS * * In the configuration tested, the EUT detailed in this report complied with the standards specified above. Please refer to section 3 of this report for further details. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM100600095801 Page: 2 of 17 FCC ID: XJJCHANGCHENG1 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 2 Version Revision Record Version Chapter Date Modifier Remark 00 2010-07-16 Original Authorized for issue by: 2010-07-01 to 2010-07-07 Tested By (David Liu) / Project Engineer Date 2010-07-15 Prepared By (Millie Li) / Clerk Date 2010-07-16 Checked By (Jeffrey Chen) / Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM100600095801 Page: 3 of 17 FCC ID: XJJCHANGCHENG1 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 3 Test Summary Test Test Requirement Stanadard Para…

Text truncated - open the document above for the full version.

Radiated Emission Test Setup Emissions below 30MHz: Emissions from 30MHz to 1000MHz: